dmesg.log

dmesg.log (text/plain), 17.47 KB, created by Dustin Polke on 2007-03-08 19:35:11 UTC

Linux version 2.6.21-rc3 (root@solaris) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 Thu Mar 8 14:50:04 CET 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000000eef0000 end: 000000000eff0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000eff0000 size: 000000000000ffc0 end: 000000000effffc0 type: 3
copy_e820_map() start: 000000000effffc0 size: 0000000000000040 end: 000000000f000000 type: 4
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
 BIOS-e820: 000000000eff0000 - 000000000effffc0 (ACPI data)
 BIOS-e820: 000000000effffc0 - 000000000f000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
239MB LOWMEM available.
Entering add_active_range(0, 0, 61424) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    61424
early_node_map[1] active PFN ranges
    0:        0 ->    61424
On node 0 totalpages: 61424
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 447 pages used for memmap
  Normal zone: 56881 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP 000E4010, 0014 (r0 OID_00)
ACPI: RSDT 0EFFFBC0, 0030 (r1 OID_00 RSDT_000 30303030 _CSI    10101)
ACPI: FACP 0EFFFAC0, 0074 (r1 INSYDE FACP_000      100 _CSI    10101)
ACPI: DSDT 0EFFC5F0, 34CC (r1 INSYDE   VT8362     1000 MSFT  100000D)
ACPI: FACS 0EFFFFC0, 0040
ACPI: BOOT 0EFFFB50, 0028 (r1 INSYDE SYS_BOOT      100 _CSI    10101)
ACPI: DBGP 0EFFFB80, 0034 (r1 INSYDE SYS_DBGP      100 _CSI    10101)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 10000000 (gap: 0f000000:f0f80000)
Built 1 zonelists.  Total pages: 60945
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda7 apm=on acpi=on cpufreq.debug=3 video=vesafb:ywrap,mtrr:2,1024x768-16@72 splash=silent,theme:Emergance CONSOLE=/dev/tty1 quiet
Enabling fast FPU save and restore... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0443000 soft=c0442000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 1333.446 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 236728k/245696k available (2337k kernel code, 8372k reserved, 783k data, 188k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffff8000 - 0xfffff000   (  28 kB)
    vmalloc : 0xcf800000 - 0xffff6000   ( 775 MB)
    lowmem  : 0xc0000000 - 0xceff0000   ( 239 MB)
      .init : 0xc040e000 - 0xc043d000   ( 188 kB)
      .data : 0xc03486e7 - 0xc040c634   ( 783 kB)
      .text : 0xc0100000 - 0xc03486e7   (2337 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2668.94 BogoMIPS (lpj=5337894)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
Enabling disabled K7/SSE Support.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: AMD mobile AMD Athlon(tm) XP 1500+  stepping 01
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe8a64, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 80): [55] 3c & 1f -> 1c
0000:00:11.1: cannot adjust BAR0 (not I/O)
0000:00:11.1: cannot adjust BAR1 (not I/O)
0000:00:11.1: cannot adjust BAR2 (not I/O)
0000:00:11.1: cannot adjust BAR3 (not I/O)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PCI: setting IRQ 13 as level-triggered
pnp: PnP ACPI: found 11 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:0a.0
Time: tsc clocksource has been installed.
pnp: 00:05: iomem range 0xfffc0000-0xffffffff could not be reserved
pnp: 00:07: ioport range 0x1600-0x167f has been reserved
pnp: 00:07: ioport range 0x2c8-0x2cf has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x1000-0x105f has been reserved
pnp: 00:07: iomem range 0xd4000-0xd7fff has been reserved
pnp: 00:07: iomem range 0xff00000-0xfffffff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-dfff
  MEM window: e0000000-efffffff
  PREFETCH window: 90000000-9fffffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
  IO window: 00001400-000014ff
  IO window: 00001800-000018ff
  PREFETCH window: 10000000-13ffffff
  MEM window: 14000000-17ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2708k freed
Simple Boot Flag at 0x37 set to 0x1
audit: initializing netlink socket (disabled)
audit(1173382417.520:1): initialized
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Applying VIA southbridge workaround.
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (75 C)
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xa0000000
[drm] Initialized drm 1.1.0 20060810
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Time: acpi_pm clocksource has been installed.
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci0000:00:11.1
    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0804H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI DVD-ROM SDR-083, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input3
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
cpufreq-core: trying to register driver powernow-k7
cpufreq-core: adding CPU 0
powernow-k7: FSB: 133MHz
powernow-k7: Found PSB header at c00e5100
powernow-k7: Table version: 0x12
powernow-k7: Flags: 0x0
powernow-k7: Mobile voltage regulator
powernow-k7: Settling Time: 100 microseconds.
powernow-k7: Has 1 PST tables. (Only dumping ones relevant to this CPU).
powernow: No PST tables match this cpuid (0x781)
powernow: This is indicative of a broken BIOS.
powernow: Trying ACPI perflib
powernow-k7: acpi:  P0: 950 MHz 24000 mW 125 uS control 009c418d SGTC 10000
powernow-k7:    FID: 0xd (9.5x [1266MHz])  VID: 0xc (1.400V)
powernow-k7: acpi:  P1: 750 MHz 16337 mW 125 uS control 009c41c9 SGTC 10000
powernow-k7:    FID: 0x9 (7.5x [1000MHz])  VID: 0xe (1.300V)
powernow-k7: acpi:  P2: 700 MHz 15248 mW 125 uS control 009c41c8 SGTC 10000
powernow-k7:    FID: 0x8 (7.0x [933MHz])  VID: 0xe (1.300V)
powernow-k7: acpi:  P3: 600 MHz 12084 mW 125 uS control 009c4226 SGTC 10000
powernow-k7:    FID: 0x6 (6.0x [800MHz])  VID: 0x11 (1.250V)
powernow-k7: acpi:  P4: 500 MHz 9280 mW 125 uS control 009c4264 SGTC 10000
powernow-k7:    FID: 0x4 (5.0x [666MHz])  VID: 0x13 (1.200V)
powernow: Minimum speed 666 MHz. Maximum speed 1266 MHz.
freq-table: setting show_table for cpu 0 to cec867e0
freq-table: table entry 0: 1266768 kHz, 3085 index
freq-table: table entry 1: 1000080 kHz, 3593 index
freq-table: table entry 2: 933408 kHz, 3592 index
freq-table: table entry 3: 800064 kHz, 4358 index
freq-table: table entry 4: 666720 kHz, 4868 index
cpufreq-core: setting new policy for CPU 0: 666720 - 1266768 kHz
freq-table: request for verification of policy (666720 - 1266768 kHz) for cpu 0
freq-table: verification lead to (666720 - 1266768 kHz) for cpu 0
freq-table: request for verification of policy (666720 - 950000 kHz) for cpu 0
freq-table: verification lead to (666720 - 950000 kHz) for cpu 0
cpufreq-core: new min and max freqs are 666720 - 950000 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 0, event 1
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 0, event 3
cpufreq-core: target for CPU 0: 950000 kHz, relation 1
freq-table: request for target 950000 kHz (relation: 1) for cpu 0
freq-table: target is 2 (933408 kHz, 3592)
cpufreq-core: notification 0 of frequency transition to 933408 kHz
cpufreq-core: saving 5337894 as reference value for loops_per_jiffy;freq is 1333440 kHz
cpufreq-core: notification 1 of frequency transition to 933408 kHz
cpufreq-core: scaling loops_per_jiffy to 3736525for frequency 933408 kHz
cpufreq-core: initialization complete
cpufreq-core: driver powernow-k7 up and running
Using IPI Shortcut mode
Freeing unused kernel memory: 188k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Clocksource tsc unstable (delta = -112861963 ns)
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 11, io base 0x00001200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
JFS: nTxBlock = 1873, nTxLock = 14989
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
Yenta: CardBus bridge found at 0000:00:0a.0 [1025:001d]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
parport_pc: VIA parallel port: io=0x378, irq=7
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000007
input: PC Speaker as /class/input/input6
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
PCI: Setting latency timer of device 0000:00:11.6 to 64
MC'97 0 converters and GPIO not ready (0x1)
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:11.5 to 64
PCI: Enabling device 0000:00:12.0 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xf0000000, 00:c0:9f:14:19:58, IRQ 11.
eth0: MII PHY found at address 1, status 0x782d advertising 01e1 Link 41e1.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
savagefb: mapped io at cfb80000
savagefb: probed videoram:  16384k
savagefb: Detected current MCLK value of 14318 kHz
savagefb: mapped framebuffer at cfc80000, pbase == 90000000
savagefb v0.4.0_2.6: 16256kB VRAM, using 800x600, 37.878kHz, 60Hz
Console: switching to colour frame buffer device 100x37
fb: S3 TwisterK frame buffer device
EXT3 FS on hda7, internal journal
[drm] Initialized savage 2.4.1 20050313 on minor 0
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
ReiserFS: hda9: found reiserfs format "3.6" with standard journal
ReiserFS: hda9: using ordered data mode
ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda9: checking transaction log (hda9)
ReiserFS: hda9: Using r5 hash to sort names
Adding 473908k swap on /dev/hda2.  Priority:-1 extents:1 across:473908k
Real Time Clock Driver v1.12ac
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
mtrr: no more MTRRs available
mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
mtrr: no more MTRRs available
mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
cpufreq-core: setting new policy for CPU 0: 666720 - 950000 kHz
freq-table: request for verification of policy (666720 - 950000 kHz) for cpu 0
freq-table: verification lead to (666720 - 950000 kHz) for cpu 0
freq-table: request for verification of policy (666720 - 950000 kHz) for cpu 0
freq-table: verification lead to (666720 - 950000 kHz) for cpu 0
cpufreq-core: new min and max freqs are 666720 - 950000 kHz
cpufreq-core: governor switch
cpufreq-core: __cpufreq_governor for CPU 0, event 2
cpufreq-core: __cpufreq_governor for CPU 0, event 1
cpufreq-core: target for CPU 0: 950000 kHz, relation 1
freq-table: request for target 950000 kHz (relation: 1) for cpu 0
freq-table: target is 2 (933408 kHz, 3592)
cpufreq-core: notification 0 of frequency transition to 933408 kHz
cpufreq-core: notification 1 of frequency transition to 933408 kHz
cpufreq-core: governor: change or update limits
cpufreq-core: __cpufreq_governor for CPU 0, event 3
cpufreq-core: target for CPU 0: 950000 kHz, relation 1
freq-table: request for target 950000 kHz (relation: 1) for cpu 0
freq-table: target is 2 (933408 kHz, 3592)
cpufreq-core: notification 0 of frequency transition to 933408 kHz
cpufreq-core: notification 1 of frequency transition to 933408 kHz
Installing knfsd (copyright (C) 1996 [e-mail]).
ip_tables: (C) 2000-2006 Netfilter Core Team