l, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
NTFS driver 2.1.27 [Flags: R/W].
fuse init (API version 7.7)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
toshiba: not a supported Toshiba laptop
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
vesafb: unrecognized option mtrr
vesafb: unrecognized option pmipal:0
vesafb: ATI Technologies Inc., C24 , 01.00 (OEM: ATI MOBILITY RADEON X600   )
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:5b67
vesafb: pmi: set display start = c00c5bd5, set palette = c00c5c0f
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'livecd-2006.1'
vesafb: framebuffer at 0x90000000, mapped to 0xf8900000, using 6144k, total 131008k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Transitioning device [FAN1] to D3
ACPI: Transitioning device [FAN1] to D3
ACPI: Fan [FAN1] (off)
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Getting cpuindex for acpiid 0x1
ACPI: Thermal Zone [TZCR] (47 C)
ACPI: Thermal Zone [TZVR] (30 C)
ACPI: Thermal Zone [TZVL] (29 C)
ACPI: Thermal Zone [TZCL] (28 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.10 addr 0xbc000000 irq 11 Yukon-EC (0xb6) rev 1
sky2 eth0: addr 00:a0:d1:2a:a7:11
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
input: AT Translated Set 2 keyboard as /class/input/input0
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
hdc: MATSHITADVD-RAM UJ-841S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ahci 0000:00:1f.2: version 2.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ahci: probe of 0000:00:1f.2 failed with error -12
ata_piix 0000:00:1f.2: version 2.00ac6
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ata: 0x170 IDE port busy
ata: conflict with ide1
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
ata2: DUMMY
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : ata_piix
scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4O PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
I2O subsystem v1.325
i2o: max drivers = 8
I2O SCSI Peripheral OSM v1.316
i2c /dev entries driver
ip_conntrack version 2.4 (7168 buckets, 57344 max) - 176 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1e.2 to 64
ALSA /var/tmp/portage/media-sound/alsa-driver-1.0.14_rc1/work/alsa-driver-1.0.14rc1/pci/ac97/ac97_codec.c:2108: AC'97 0 analog subsections not ready
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4kdm
ipw2200: Copyright(c) 2003-2006 Intel Corporation
sdhci: Secure Digital Host Controller Interface driver, 0.12
sdhci: Copyright(c) Pierre Ossman
intel8x0_measure_ac97_clock: measured 50498 usecs
intel8x0: clocking to 48000
sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
ACPI: PCI Interrupt 0000:06:06.4[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
mmc0: SDHCI at 0xb000a000 irq 11 DMA
mmc1: SDHCI at 0xb000a100 irq 11 DMA
mmc2: SDHCI at 0xb000a200 irq 11 DMA
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt 0000:06:06.3[D] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[6]  MMIO=[b0000000-b00007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x66
Yenta: ISA IRQ mask 0x0018, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
irq 11: nobody cared (try booting with the "irqpoll" option)
 [<c01331b2>] __report_bad_irq+0x36/0x7d
 [<c01333cb>] note_interrupt+0x1d2/0x20f
 [<c0133b28>] handle_level_irq+0xb1/0xfb
 [<c01050dc>] do_IRQ+0x6b/0x83
 [<c010365a>] common_interrupt+0x1a/0x20
 [<c01328f4>] handle_IRQ_event+0x11/0x3f
 [<c0133b14>] handle_level_irq+0x9d/0xfb
 [<c01050dc>] do_IRQ+0x6b/0x83
 [<c010365a>] common_interrupt+0x1a/0x20
 [<f88ca613>] set_phy_reg+0x91/0xb6 [ohci1394]
 [<f8f08796>] csr1212_fill_cache+0x1ac/0x1fb [ieee1394]
 [<f88ca8fb>] ohci_devctl+0x55/0x598 [ohci1394]
 [<c0380e2f>] __sched_text_start+0x4ef/0x595
 [<f8f0101c>] hpsb_reset_bus+0x1c/0x22 [ieee1394]
 [<c0122474>] run_workqueue+0x90/0xec
 [<f8f02ec0>] delayed_reset_bus+0x0/0xca [ieee1394]
 [<c0122995>] worker_thread+0xe8/0x11b
 [<c011207d>] default_wake_function+0x0/0xc
 [<c01228ad>] worker_thread+0x0/0x11b
 [<c0124de9>] kthread+0xad/0xd8
 [<c0124d3c>] kthread+0x0/0xd8
 [<c01037d3>] kernel_thread_helper+0x7/0x10
 =======================
handlers:
[<c02fb2bd>] (usb_hcd_irq+0x0/0x4d)
[<c02fb2bd>] (usb_hcd_irq+0x0/0x4d)
[<c02fb2bd>] (usb_hcd_irq+0x0/0x4d)
[<f88d289b>] (sdhci_irq+0x0/0x52b [sdhci])
[<f88d289b>] (sdhci_irq+0x0/0x52b [sdhci])
[<f88d289b>] (sdhci_irq+0x0/0x52b [sdhci])
[<f8f4375e>] (ipw_isr+0x0/0x244 [ipw2200])
[<f8f154b7>] (yenta_interrupt+0x0/0xb3 [yenta_socket])
Disabling IRQ #11
ipw2200: Firmware error detected.  Restarting.
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d12aa711]
EXT3 FS on sda9, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 506008k swap on /dev/sda7.  Priority:-1 extents:1 across:506008k
fbsplash: console 0 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 0
fbsplash: console 1 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 5
fbsplash: console 6 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 6
fbsplash: console 7 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 7
fbsplash: console 8 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 8
fbsplash: console 9 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 9
fbsplash: console 10 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 10
sky2 eth0: enabling interface
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 804 MBytes.
[fglrx] module loaded - fglrx 8.32.5 [Dec 12 2006] on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[fglrx] total      GART = 130023424
[fglrx] free       GART = 114032640
[fglrx] max single GART = 114032640
[fglrx] total      LFB  = 134086656
[fglrx] free       LFB  = 119697408
[fglrx] max single LFB  = 119697408
[fglrx] total      Inv  = 0
[fglrx] free       Inv  = 0
[fglrx] max single Inv  = 0
[fglrx] total      TIM  = 0