Linux version 2.6.19.1 (root@localhost) (gcc versión 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP PREEMPT Fri Dec 29 22:46:03 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) BIOS-e820: 000000003fe90000 - 000000003fe9b000 (ACPI data) BIOS-e820: 000000003fe9b000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f76d0 Entering add_active_range(0, 0, 261776) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 261776 early_node_map[1] active PFN ranges 0: 0 -> 261776 On node 0 totalpages: 261776 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 253 pages used for memmap HighMem zone: 32147 pages, LIFO batch:7 DMI present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: Napa ERB APIC at: 0xFEE00000 Processor #0 6:14 APIC version 20 Processor #1 6:14 APIC version 20 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1839.490 MHz processor. Built 1 zonelists. Total pages: 259731 Kernel command line: root=/dev/sda2 acpi=off mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032460k/1047104k available (3409k kernel code, 14084k reserved, 1097k data, 224k init, 129600k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc056e000 - 0xc05a6000 ( 224 kB) .data : 0xc045454d - 0xc0566a0c (1097 kB) .text : 0xc0100000 - 0xc045454d (3409 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3683.05 BogoMIPS (lpj=7366114) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000940 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 16k freed CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3679.02 BogoMIPS (lpj=7358058) CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000940 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 Total of 2 processors activated (7362.08 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=47 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd704, last bus=11 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Using IRQ router PIIX/ICH [8086/27b9] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:01.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 22 PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1c.2[C] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 PCI: using PPB 0000:00:1c.0[A] to get irq 17 PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 17 PCI: using PPB 0000:00:1c.1[A] to get irq 17 PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.1[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.2[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.3[A] -> IRQ 17 NET: Registered protocol family 23 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized PCI: Enabling device 0000:0a:04.1 (0000 -> 0002) PCI: Setting latency timer of device 0000:0a:04.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[b3201000-b32017ff] Max Packet=[2048] IR/IT contexts=[4/8] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: b1000000-b2ffffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: b3000000-b30fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: b3100000-b31fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 11, cardbus bridge: 0000:0a:04.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: b3200000-b32fffff PREFETCH window: 50000000-51ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:0a:04.0 (0000 -> 0003) PCI: Setting latency timer of device 0000:0a:04.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1167429857.772:1): initialized highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/W DEBUG]. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000095089c] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: AGP aperture is 256M @ 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. PCI: Setting latency timer of device 0000:02:00.0 to 64 e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:16:36:4b:17:c7 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata: 0x170 IDE port busy ata: conflict with ide1 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 ata2: DUMMY scsi0 : ata_piix ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ata_piix scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0004000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: HID 1241:1166 as /class/input/input0 input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:0a:04.3 [104c:803c] (rev 0) PCI: Enabling device 0000:0a:04.3 (0000 -> 0002) PCI: Setting latency timer of device 0000:0a:04.3 to 64 mmc0: SDHCI at 0xb3201800 irq 17 DMA Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC). PCI: Setting latency timer of device 0000:00:1b.0 to 64 input: AT Translated Set 2 keyboard as /class/input/input1 ALSA device list: #0: HDA Intel at 0xb0000000 irq 22 oprofile: using NMI interrupt. ip_conntrack version 2.4 (8180 buckets, 65440 max) - 176 bytes per conntrack TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode Time: tsc clocksource has been installed. Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite P100 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /class/input/input2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS volume version 3.1. NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered. NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set. Mounting read-only. Run chkdsk and mount in Windows. NTFS-fs warning (device sda1): load_system_files(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows. Adding 377516k swap on /dev/sda3. Priority:-1 extents:1 across:377516k