Line
Link Here
|
|
-ENODEV is returned on 0xff status and -EBUSY on other failures. |
|
-ENODEV is returned on 0xff status and -EBUSY on other failures. |
1 |
reset failure. It indicates no device. This removes unnecessary |
1 |
reset failure. It indicates no device. This removes unnecessary |
2 |
retries on such ports. Note that the code change assumes unoccupied |
2 |
retries on such ports. Note that the code change assumes unoccupied |
3 |
port reporting 0xff status does not produce valid device signature. |
3 |
port reporting 0xff status does not produce valid device signature. |
4 |
-- |
4 |
++ b/drivers/ata/libata-core.c |
5 |
-- a/drivers/ata/libata-core.c |
|
|
Lines 2328-2338
static inline void ata_tf_to_host(struct
Link Here
|
2328 |
* Sleep until ATA Status register bit BSY clears, |
2328 |
* Sleep until ATA Status register bit BSY clears, |
2329 |
* or a timeout occurs. |
2329 |
* or a timeout occurs. |
2330 |
* |
2330 |
* |
2331 |
* LOCKING: None. |
2331 |
* LOCKING: |
|
|
2332 |
* Kernel thread context (may sleep). |
2333 |
* |
2334 |
* RETURNS: |
2335 |
* 0 on success, -errno otherwise. |
2332 |
*/ |
2336 |
*/ |
2333 |
|
2337 |
int ata_busy_sleep(struct ata_port *ap, |
2334 |
unsigned int ata_busy_sleep (struct ata_port *ap, |
2338 |
unsigned long tmout_pat, unsigned long tmout) |
2335 |
unsigned long tmout_pat, unsigned long tmout) |
|
|
2336 |
{ |
2339 |
{ |
2337 |
unsigned long timer_start, timeout; |
2340 |
unsigned long timer_start, timeout; |
2338 |
u8 status; |
2341 |
u8 status; |
Lines 2340-2366
unsigned int ata_busy_sleep (struct ata_
Link Here
|
2340 |
status = ata_busy_wait(ap, ATA_BUSY, 300); |
2343 |
status = ata_busy_wait(ap, ATA_BUSY, 300); |
2341 |
timer_start = jiffies; |
2344 |
timer_start = jiffies; |
2342 |
timeout = timer_start + tmout_pat; |
2345 |
timeout = timer_start + tmout_pat; |
2343 |
while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { |
2346 |
while (status != 0xff && (status & ATA_BUSY) && |
|
|
2347 |
time_before(jiffies, timeout)) { |
2344 |
msleep(50); |
2348 |
msleep(50); |
2345 |
status = ata_busy_wait(ap, ATA_BUSY, 3); |
2349 |
status = ata_busy_wait(ap, ATA_BUSY, 3); |
2346 |
} |
2350 |
} |
2347 |
|
2351 |
|
2348 |
if (status & ATA_BUSY) |
2352 |
if (status != 0xff && (status & ATA_BUSY)) |
2349 |
ata_port_printk(ap, KERN_WARNING, |
2353 |
ata_port_printk(ap, KERN_WARNING, |
2350 |
"port is slow to respond, please be patient " |
2354 |
"port is slow to respond, please be patient " |
2351 |
"(Status 0x%x)\n", status); |
2355 |
"(Status 0x%x)\n", status); |
2352 |
|
2356 |
|
2353 |
timeout = timer_start + tmout; |
2357 |
timeout = timer_start + tmout; |
2354 |
while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { |
2358 |
while (status != 0xff && (status & ATA_BUSY) && |
|
|
2359 |
time_before(jiffies, timeout)) { |
2355 |
msleep(50); |
2360 |
msleep(50); |
2356 |
status = ata_chk_status(ap); |
2361 |
status = ata_chk_status(ap); |
2357 |
} |
2362 |
} |
2358 |
|
2363 |
|
|
|
2364 |
if (status == 0xff) |
2365 |
return -ENODEV; |
2366 |
|
2359 |
if (status & ATA_BUSY) { |
2367 |
if (status & ATA_BUSY) { |
2360 |
ata_port_printk(ap, KERN_ERR, "port failed to respond " |
2368 |
ata_port_printk(ap, KERN_ERR, "port failed to respond " |
2361 |
"(%lu secs, Status 0x%x)\n", |
2369 |
"(%lu secs, Status 0x%x)\n", |
2362 |
tmout / HZ, status); |
2370 |
tmout / HZ, status); |
2363 |
return 1; |
2371 |
return -EBUSY; |
2364 |
} |
2372 |
} |
2365 |
|
2373 |
|
2366 |
return 0; |
2374 |
return 0; |
Lines 2451-2460
static unsigned int ata_bus_softreset(st
Link Here
|
2451 |
* the bus shows 0xFF because the odd clown forgets the D7 |
2459 |
* the bus shows 0xFF because the odd clown forgets the D7 |
2452 |
* pulldown resistor. |
2460 |
* pulldown resistor. |
2453 |
*/ |
2461 |
*/ |
2454 |
if (ata_check_status(ap) == 0xFF) { |
2462 |
if (ata_check_status(ap) == 0xFF) |
2455 |
ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); |
2463 |
return 0; |
2456 |
return AC_ERR_OTHER; |
|
|
2457 |
} |
2458 |
|
2464 |
|
2459 |
ata_bus_post_reset(ap, devmask); |
2465 |
ata_bus_post_reset(ap, devmask); |
2460 |
|
2466 |
|
2461 |
-- a/include/linux/libata.h |
2467 |
++ b/include/linux/libata.h |
Lines 746-754
extern int ata_scsi_device_suspend(struc
Link Here
|
746 |
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); |
746 |
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); |
747 |
extern void ata_host_resume(struct ata_host *host); |
747 |
extern void ata_host_resume(struct ata_host *host); |
748 |
extern int ata_ratelimit(void); |
748 |
extern int ata_ratelimit(void); |
749 |
extern unsigned int ata_busy_sleep(struct ata_port *ap, |
749 |
extern int ata_busy_sleep(struct ata_port *ap, |
750 |
unsigned long timeout_pat, |
750 |
unsigned long timeout_pat, unsigned long timeout); |
751 |
unsigned long timeout); |
|
|
752 |
extern void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), |
751 |
extern void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), |
753 |
void *data, unsigned long delay); |
752 |
void *data, unsigned long delay); |
754 |
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, |
753 |
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, |
Lines 1064-1070
static inline u8 ata_busy_wait(struct at
Link Here
|
1064 |
udelay(10); |
1063 |
udelay(10); |
1065 |
status = ata_chk_status(ap); |
1064 |
status = ata_chk_status(ap); |
1066 |
max--; |
1065 |
max--; |
1067 |
} while ((status & bits) && (max > 0)); |
1066 |
} while (status != 0xff && (status & bits) && (max > 0)); |
1068 |
|
1067 |
|
1069 |
return status; |
1068 |
return status; |
1070 |
} |
1069 |
} |
Lines 1085-1091
static inline u8 ata_wait_idle(struct at
Link Here
|
1085 |
{ |
1084 |
{ |
1086 |
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); |
1085 |
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); |
1087 |
|
1086 |
|
1088 |
if (status & (ATA_BUSY | ATA_DRQ)) { |
1087 |
if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ))) { |
1089 |
unsigned long l = ap->ioaddr.status_addr; |
1088 |
unsigned long l = ap->ioaddr.status_addr; |
1090 |
if (ata_msg_warn(ap)) |
1089 |
if (ata_msg_warn(ap)) |
1091 |
printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n", |
1090 |
printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n", |