my xorg.conf (Composite enabled via command-line)

xorg.conf (text/plain), 13.30 KB, created by Johannes Köster on 2006-09-23 07:20:19 UTC

# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
	Identifier     "Server Layout"
	Screen         "Screen0" 0 0
	InputDevice    "lmpcm" "SendCoreEvents"
	InputDevice    "TouchPad" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
	Option			"AIGLX" "true"
EndSection

Section "ServerLayout"
   Identifier  	"fglrxlayout"
	Screen         "fglrxscreen" 0 0
	InputDevice    "lmpcm" "SendCoreEvents"
	InputDevice    "TouchPad" "CorePointer"
	InputDevice    "Keyboard1" "CoreKeyboard"
	Option			"AIGLX"  "false"
EndSection


Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
# The module search path.  The default path is shown here.
	FontPath     "/usr/share/fonts/misc:unscaled"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/corefonts"
	FontPath     "/usr/share/fonts/freefont"
	FontPath     "/usr/share/fonts/sharefonts"
	FontPath     "/usr/share/fonts/terminus"
	FontPath     "/usr/share/fonts/ttf-bitstream-vera"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/artwiz"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
	Load  "dbe"  	# Double buffer extension
	Load  "extmod"
#		Option	    "omit xfree86-dga"   # don't initialise the DGA extension
	Load  "type1"
	Load  "freetype"
	Load  "glx"   # libglx.a
	Load  "dri"   # libdri.a
	Load	"ddc"
	Load	"vbe"
	Load  "synaptics"
EndSection

Section "Extensions"
    #Option "Composite" "true"
	 #Option "RENDER" "true"
	 #Option "DAMAGE" "true"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option "Protocol"   "Xqueue"
#    Option "Xleds"      "1 2 3"
#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""
#    Option "XkbDisable"
	Identifier  "Keyboard1"
	Driver      "kbd"
	Option	    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "de"
	Option	    "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
	Identifier  "TouchPad"
	Driver      "synaptics"
	Option	    "Device" "/dev/input/mouse0"
	Option	    "Protocol" "auto-dev"
	Option	    "LeftEdge" "1700"
	Option	    "RightEdge" "5300"
	Option	    "TopEdge" "1700"
	Option	    "BottomEdge" "4200"
	Option	    "FingerLow" "25"
	Option	    "FingerHigh" "30"
	Option	    "MaxTapTime" "180"
	Option	    "MaxTapMove" "220"
	Option	    "VertScrollDelta" "100"
	Option	    "MinSpeed" "0.09"
	Option	    "MaxSpeed" "0.18"
	Option	    "AccelFactor" "0.0015"
	Option	    "SHMConfig" "on"
EndSection

Section "InputDevice"
	Identifier  "lmpcm"
	Driver      "evdev"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/event3"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Buttons" "12"
EndSection

Section "Monitor"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode 
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
	Identifier   "Monitor0"
EndSection

Section "Monitor"
	Identifier	 "Monitor1"
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset     "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.
#    BusID       "PCI:0:10:0"
#    VideoRam    256
#    Clocks      25.2 28.3
	Identifier  "Standard VGA"
	Driver      "vga"
	VendorName  "Unknown"
	BoardName   "Unknown"
EndSection

Section "Device" 
        Identifier      "ATI" 
        Driver          "radeon" 
        Option          "AGPMode"			"8" 
		  Option 			"AGPFastWrite"		"no"
        Option          "RenderAccel"		"on" 
		  #Option 			"XAANoOffscreenPixmaps"		"on"
		  Option				"DynamicClocks"	"on"
		  Option				"ColorTiling"		"on"
		  Option				"DMAForXv"			"on"
		  Option				"EnablePageFlip"	"true"
		  Option				"SubPixelOrder"	"none"
		  Option 			"mtrr"				"on"
		  Option      		"backingstore" "true"
		  #Option				"FBTexPercent"		"95"
		  Option				"BIOSHotkeys"		"on"
		  Option				"VGAAccess"			"off"
		  Option  			"AccelMethod"		"exa" 
        Option				"MergedFB"			"on"
		  Option				"CRT2Position"		"Clone"
		  Option				"CRT2HSync"			"63.9"
		  Option				"CRT2VRefresh"		"60"
		  Option 			"MetaModes"			"1024x768-1280x1024 1024-768"
		  Option				"MonitorLayout"	"LVDS,TMDS"
		  #Option				"DRI"					"on"
		  BusID  			"PCI:1:0:0" 
		  Screen 			0 
EndSection

Section "Device"

# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
	 # === disable/enable XAA/DRI ===
	 # ### FireGL DDX driver module specific settings ###
	 # === Screen Management ===
	 # Note: When OpenGL Overlay is enabled, Video Overlay
	 #       will be disabled automatically
	# vendor=1002, device=4e50
	Identifier  "fglrx"
	Driver      "fglrx"
	Option       "no_accel" "no"
	Option       "no_dri" "no"
	# === misc DRI settings ===
	Option       "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
	Option       "DesktopSetup" "mirror"
	Option       "ScreenOverlap" "0"
	Option       "GammaCorrectionI" "0x00000000"
	Option       "GammaCorrectionII" "0x00000000"
	# === OpenGL specific profiles/settings ===
	Option       "Capabilities" "0x00000000"
	Option       "CapabilitiesEx" "0x00000000"
	# === Video Overlay for the Xv extension ===
	Option       "VideoOverlay" "on"
	# === OpenGL Overlay ===
	Option       "OpenGLOverlay" "off"
	# === Center Mode (Laptops only) ===
	Option       "CenterMode" "off"
	# === Pseudo Color Visuals (8-bit visuals) ===
	Option       "PseudoColorVisuals" "off"
	# === QBS Management ===
	Option       "Stereo" "off"
	Option       "StereoSyncEnable" "1"
	# === FSAA Management ===
	Option       "FSAAEnable" "off"
	Option       "FSAAScale" "6"
	Option       "FSAADisableGamma" "off"
	Option       "FSAACustomizeMSPos" "no"
	Option       "FSAAMSPosX0" "0.000000"
	Option       "FSAAMSPosY0" "0.000000"
	Option       "FSAAMSPosX1" "0.000000"
	Option       "FSAAMSPosY1" "0.000000"
	Option       "FSAAMSPosX2" "0.000000"
	Option       "FSAAMSPosY2" "0.000000"
	Option       "FSAAMSPosX3" "0.000000"
	Option       "FSAAMSPosY3" "0.000000"
	Option       "FSAAMSPosX4" "0.000000"
	Option       "FSAAMSPosY4" "0.000000"
	Option       "FSAAMSPosX5" "0.000000"
	Option       "FSAAMSPosY5" "0.000000"
	# === Misc Options ===
	Option      "AGPMask"   "0x00000010"    # For AGP v1-v2
	Option       "AGPv3Mask"   "0x00000010"    # For AGP v3
	Option       "UseFastTLS" "0"
	Option       "BlockSignalsOnLock" "on"
	Option       "UseInternalAGPGART" "no"
	Option      "ForceGenericCPU" "no"
	Option		"OverlayOnCRTC2" "1"
	Option      "KernelModuleParm" "on"
	BusID       "PCI:1:0:0"
EndSection
																																											  

Section "Screen"

    #Option "backingstore"
	Identifier "Screen0"
	Device     "ATI"
	Monitor    "Monitor0"
	DefaultDepth     24
	
	SubSection "Display"

  # initial origin if mode is smaller than desktop
      Virtual  1024 768
		Depth    24
		Modes    "1024x768" "800x600"
	EndSubSection
EndSection

Section "Screen"
   Identifier "fglrxscreen"
   Device     "fglrx"
   Monitor    "Monitor0"
   DefaultDepth     24
   SubSection "Display"
	   # initial origin if mode is smaller than desktop
      Virtual  1024 768
      Depth    24
      Modes    "1024x768" "800x600"
   EndSubSection
EndSection

Section "DRI"

# Access to OpenGL ICD is allowed for all users:
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
	Mode         0666
EndSection