dmesg:linux-2.6.18-gentoo

2.6.18 (text/plain), 14.97 KB, created by GNUtoo on 2006-09-22 11:03:42 UTC

0:0:10
PM: Adding info for No Bus:target0:0:11
PM: Removing info for No Bus:target0:0:11
PM: Adding info for No Bus:target0:0:12
PM: Removing info for No Bus:target0:0:12
PM: Adding info for No Bus:target0:0:13
PM: Removing info for No Bus:target0:0:13
PM: Adding info for No Bus:target0:0:14
PM: Removing info for No Bus:target0:0:14
PM: Adding info for No Bus:target0:0:15
PM: Removing info for No Bus:target0:0:15
libata version 2.00 loaded.
sata_via 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 201
PCI: VIA IRQ fixup for 0000:00:0f.0, from 10 to 9
sata_via 0000:00:0f.0: routed to hard irq line 9
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 201
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 201
scsi1 : sata_via
PM: Adding info for No Bus:host1
ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xEC07
scsi2 : sata_via
PM: Adding info for No Bus:host2
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xE407
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
sr 0:0:2:0: Attached scsi CD-ROM sr0
sr 0:0:2:0: Attached scsi generic sg0 type 5
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
aoe: aoe_init: AoE v22 initialised.
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209
PCI: VIA IRQ fixup for 0000:00:10.4, from 12 to 1
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 209, io mem 0xdfff4e00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
PM: Adding info for No Bus:usbdev1.1_ep81
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 209
PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 209, io base 0x00009800
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev2.1_ep81
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 209
PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 209, io base 0x00009c00
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev3.1_ep81
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 209
PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 1
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 209, io base 0x0000a000
PM: Adding info for usb:usb4
PM: Adding info for No Bus:usbdev4.1_ep00
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev4.1_ep81
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 209
PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 1
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 209, io base 0x0000a400
PM: Adding info for usb:usb5
PM: Adding info for No Bus:usbdev5.1_ep00
usb usb5: configuration #1 chosen from 1 choice
PM: Adding info for usb:5-0:1.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
PM: Adding info for No Bus:usbdev5.1_ep81
Initializing USB Mass Storage driver...
PM: Adding info for usb:2-1
PM: Adding info for No Bus:usbdev2.2_ep00
usb 2-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-1:1.0
PM: Adding info for No Bus:usbdev2.2_ep81
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
usbcore: registered new driver asix
PM: Adding info for platform:rtc-test.0
rtc-test rtc-test.0: rtc intf: sysfs
rtc-test rtc-test.0: rtc intf: proc
rtc-test rtc-test.0: rtc intf: dev (253:0)
rtc-test rtc-test.0: rtc core: registered test as rtc0
PM: Adding info for platform:rtc-test.1
rtc-test rtc-test.1: rtc intf: sysfs
rtc-test rtc-test.1: rtc intf: dev (253:1)
rtc-test rtc-test.1: rtc core: registered test as rtc1
i2c /dev entries driver
i2c-parport: adapter type unspecified
i2c-parport: adapter type unspecified
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: multipath personality registered for level -4
md: faulty personality registered for level -5
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [e-mail]
device-mapper: multipath: version 1.0.4 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
EDAC MC: Ver: 2.0.1 Sep 21 2006
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
PM: Adding info for platform:snd_serial_u16550.0
no UART detected at 0x1
PM: Removing info for platform:snd_serial_u16550.0
PM: Adding info for platform:snd_mtpav
ALSA sound/drivers/mtpav.c:589: MTVAP port 0x378 is busy
snd_mtpav: probe of snd_mtpav failed with error -16
PM: Removing info for platform:snd_mtpav
PM: Adding info for platform:snd_mpu401.0
ALSA sound/drivers/mpu401/mpu401.c:106: specify port
snd_mpu401: probe of snd_mpu401.0 failed with error -22
PM: Removing info for platform:snd_mpu401.0
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 217
PCI: VIA IRQ fixup for 0000:00:11.5, from 12 to 9
PCI: Setting latency timer of device 0000:00:11.5 to 64
PM: Adding info for ac97:0-0:CMI9761
ALSA device list:
  #0: VIA 8237 with CMI9761 at 0x9400, irq 217
pktgen v2.67: Packet Generator for packet performance testing.
netem: version 1.2
u32 classifier
    Performance counters on
    OLD policer on 
    input device check on 
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_conntrack version 2.4 (2047 buckets, 16376 max) - 192 bytes per conntrack
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
ebt_ulog: not logging via ulog since somebody else already registered for PF_BRIDGE
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
ACPI: (supports S0 S1 S4 S5)
rtc-test rtc-test.0: setting the system clock to 2006-09-22 17:30:15 (1158946215)
md: Autodetecting RAID arrays.
md: autorun ...
Time: tsc clocksource has been installed.
md: ... autorun DONE.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: journal-1153: found in header: first_unflushed_offset 7228, last_flushed_trans_id 148786
ReiserFS: hda2: journal-1206: Starting replay from offset 639035299077180, trans_id 0
ReiserFS: hda2: journal-1299: Setting newest_mount_id to 460
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 284k freed
Adding 1052216k swap on /dev/hda1.  Priority:-1 extents:1 across:1052216k
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: table: 252:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 225
rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com
rt2500 EEPROM:  1  2  3  4  5  6  7  8  9 10 11 12 13 14  Channel
rt2500 EEPROM:  9  9  9  9  9  9  9  9  9  9  9  9  9  9  dBm Maximum
rt2500 EEPROM:  1  2  3  4  5  6  7  8  9 10 11 12 13 14  Channel
rt2500 EEPROM:  9  9  9  9  9  9  9  9  9  9  9  9  9  9  dBm Maximum
ra0: no IPv6 routers present
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
PM: Preparing system for standby sleep
Stopping tasks: ========================================================|
ac97 0-0:CMI9761: suspend
rtc-test rtc-test.1: suspend
rtc-test rtc-test.0: suspend
usbhid 2-1:1.0: suspend
usb 2-1: suspend, may wakeup
hub 5-0:1.0: suspend
usb usb5: suspend, may wakeup
hub 4-0:1.0: suspend
usb usb4: suspend, may wakeup
hub 3-0:1.0: suspend
usb usb3: suspend, may wakeup
hub 2-0:1.0: suspend
usb usb2: suspend, may wakeup
hub 1-0:1.0: suspend
usb usb1: suspend, may wakeup
sr 0:0:2:0: suspend
ide-cdrom 1.0: suspend
ide-disk 0.0: suspend
platform floppy.0: suspend
i8042 i8042: suspend
serial8250 serial8250: suspend
vga16fb vga16fb.0: suspend
vesafb vesafb.0: suspend
pcspkr pcspkr: suspend
pci 0000:01:00.1: suspend
radeonfb 0000:01:00.0: suspend
radeonfb (0000:01:00.0): suspending to state: 2...
via-rhine 0000:00:12.0: suspend
VIA 82xx Audio 0000:00:11.5: suspend
pci 0000:00:11.0: suspend
ehci_hcd 0000:00:10.4: suspend, may wakeup
uhci_hcd 0000:00:10.3: suspend
uhci_hcd 0000:00:10.2: suspend
uhci_hcd 0000:00:10.1: suspend
uhci_hcd 0000:00:10.0: suspend
VIA_IDE 0000:00:0f.1: suspend
sata_via 0000:00:0f.0: suspend
pci 0000:00:0d.0: suspend
rt2500 0000:00:0b.0: suspend
ra0: got suspend request (event 2)
skge 0000:00:0a.0: suspend
pci 0000:00:09.1: suspend
HPT366_IDE 0000:00:09.0: suspend
pci 0000:00:01.0: suspend
agpgart-via 0000:00:00.0: suspend
pci_set_power_state(): 0000:00:00.0: state=3, current state=5
acpi acpi: suspend
PM: Entering standby sleep
Class driver suspend failed for cpu0
Could not power down device `„ˆÀ: error -22
Some devices failed to power down
APIC error on CPU0: 00(00)
PM: Finishing wakeup.
acpi acpi: resuming
agpgart-via 0000:00:00.0: resuming
pci 0000:00:01.0: resuming
PCI: Setting latency timer of device 0000:00:01.0 to 64
HPT366_IDE 0000:00:09.0: resuming
pci 0000:00:09.1: resuming
skge 0000:00:0a.0: resuming
PM: Writing back config space on device 0000:00:0a.0 at offset f (was 1f170100, writing 1f17010c)
PM: Writing back config space on device 0000:00:0a.0 at offset c (was 0, writing fffe0000)
PM: Writing back config space on device 0000:00:0a.0 at offset 5 (was 1, writing ac01)
PM: Writing back config space on device 0000:00:0a.0 at offset 4 (was 0, writing dfff8000)
PM: Writing back config space on device 0000:00:0a.0 at offset 3 (was 0, writing 2008)
PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2b00000, writing 2b00017)
rt2500 0000:00:0b.0: resuming
ra0: got resume request
pci 0000:00:0d.0: resuming
sata_via 0000:00:0f.0: resuming
VIA_IDE 0000:00:0f.1: resuming
uhci_hcd 0000:00:10.0: resuming
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 209
uhci_hcd 0000:00:10.1: resuming
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 209
uhci_hcd 0000:00:10.2: resuming
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 209
uhci_hcd 0000:00:10.3: resuming
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 209
ehci_hcd 0000:00:10.4: resuming
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209
pci 0000:00:11.0: resuming
VIA 82xx Audio 0000:00:11.5: resuming
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 217
via-rhine 0000:00:12.0: resuming
radeonfb 0000:01:00.0: resuming
radeonfb (0000:01:00.0): resuming from state: 2...
pci 0000:01:00.1: resuming
pcspkr pcspkr: resuming
vesafb vesafb.0: resuming
vga16fb vga16fb.0: resuming
serial8250 serial8250: resuming
i8042 i8042: resuming
serio serio0: resuming
atkbd serio1: resuming
platform floppy.0: resuming
ide-disk 0.0: resuming
ide-cdrom 1.0: resuming
sr 0:0:2:0: resuming
usb usb1: resuming
hub 1-0:1.0: resuming
usb usb2: resuming
hub 2-0:1.0: resuming
usb usb3: resuming
hub 3-0:1.0: resuming
usb usb4: resuming
hub 4-0:1.0: resuming
usb usb5: resuming
hub 5-0:1.0: resuming
usb 2-1: resuming
usbhid 2-1:1.0: resuming
rtc-test rtc-test.0: resuming
rtc-test rtc-test.1: resuming
ac97 0-0:CMI9761: resuming
Restarting tasks... done
atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R200 Microcode