output from emerge -1 dracut

output-from-emerge--1-dracut.txt (text/plain), 19.96 KB, created by Jay Faulkner on 2024-11-08 00:48:49 UTC

jf-framework /boot # emerge -1 dracut

Local copy of remote index is up-to-date and will be used.

Local copy of remote index is up-to-date and will be used.

Local copy of remote index is up-to-date and will be used.

Local copy of remote index is up-to-date and will be used.
Calculating dependencies... done!
Dependency resolution took 2.63 s (backtrack: 0/20).

[ebuild   R   ~] sys-kernel/dracut-105 

>>> Verifying ebuild manifests

>>> Emerging (1 of 1) sys-kernel/dracut-105::gentoo
 * dracut-105.tar.gz BLAKE2B SHA512 size ;-) ...                                                                     [ ok ]
>>> Unpacking source...
>>> Unpacking dracut-105.tar.gz to /var/tmp/portage/sys-kernel/dracut-105/work
>>> Source unpacked in /var/tmp/portage/sys-kernel/dracut-105/work
>>> Preparing source in /var/tmp/portage/sys-kernel/dracut-105/work/dracut-ng-105 ...
 * Applying gentoo-ldconfig-paths-r1.patch ...
patching file dracut-functions.sh
Hunk #1 succeeded at 87 with fuzz 1 (offset 6 lines).                                                                [ ok ]
 * Applying dracut-103-acct-user-group-gentoo.patch ...                                                              [ ok ]
 * Applying dracut-105-ensure-abs-args-for-objcopy.patch ...                                                         [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/sys-kernel/dracut-105/work/dracut-ng-105 ...
 * ./configure --prefix=/usr --sysconfdir=/etc --bashcompletiondir=/usr/share/bash-completion/completions --systemdsystemunitdir=/usr/lib/systemd/system
>>> Source configured.
>>> Compiling source in /var/tmp/portage/sys-kernel/dracut-105/work/dracut-ng-105 ...
make -j17 
x86_64-pc-linux-gnu-gcc -c -march=x86-64-v3 -O2 -pipe -flto -Werror=odr -Werror=lto-type-mismatch -Werror=strict-aliasing -D_FILE_OFFSET_BITS=64  -DCONFIG_WEAKDEP src/install/dracut-install.c -o src/install/dracut-install.o
x86_64-pc-linux-gnu-gcc -c -march=x86-64-v3 -O2 -pipe -flto -Werror=odr -Werror=lto-type-mismatch -Werror=strict-aliasing -D_FILE_OFFSET_BITS=64  -DCONFIG_WEAKDEP src/install/hashmap.c -o src/install/hashmap.o
x86_64-pc-linux-gnu-gcc -c -march=x86-64-v3 -O2 -pipe -flto -Werror=odr -Werror=lto-type-mismatch -Werror=strict-aliasing -D_FILE_OFFSET_BITS=64  -DCONFIG_WEAKDEP src/install/log.c -o src/install/log.o
x86_64-pc-linux-gnu-gcc -c -march=x86-64-v3 -O2 -pipe -flto -Werror=odr -Werror=lto-type-mismatch -Werror=strict-aliasing -D_FILE_OFFSET_BITS=64  -DCONFIG_WEAKDEP src/install/strv.c -o src/install/strv.o
x86_64-pc-linux-gnu-gcc -c -march=x86-64-v3 -O2 -pipe -flto -Werror=odr -Werror=lto-type-mismatch -Werror=strict-aliasing -D_FILE_OFFSET_BITS=64  -DCONFIG_WEAKDEP src/install/util.c -o src/install/util.o
x86_64-pc-linux-gnu-gcc -march=x86-64-v3 -O2 -pipe -flto -Werror=odr -Werror=lto-type-mismatch -Werror=strict-aliasing -D_FILE_OFFSET_BITS=64  -Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs  src/skipcpio/skipcpio.c   -o src/skipcpio/skipcpio
x86_64-pc-linux-gnu-gcc -march=x86-64-v3 -O2 -pipe -flto -Werror=odr -Werror=lto-type-mismatch -Werror=strict-aliasing -D_FILE_OFFSET_BITS=64  -Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs  src/util/util.c   -o src/util/util
asciidoc -a "version=105" -d manpage -b docbook -o "man/lsinitrd.1.xml" man/lsinitrd.1.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "man/dracut.conf.5.xml" man/dracut.conf.5.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "man/dracut.cmdline.7.xml" man/dracut.cmdline.7.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "man/dracut.bootup.7.xml" man/dracut.bootup.7.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "man/dracut.modules.7.xml" man/dracut.modules.7.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "man/dracut.8.xml" man/dracut.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "man/dracut-catimages.8.xml" man/dracut-catimages.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-cmdline.service.8.xml" modules.d/98dracut-systemd/dracut-cmdline.service.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-initqueue.service.8.xml" modules.d/98dracut-systemd/dracut-initqueue.service.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-mount.service.8.xml" modules.d/98dracut-systemd/dracut-mount.service.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-shutdown.service.8.xml" modules.d/98dracut-systemd/dracut-shutdown.service.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-mount.service.8.xml" modules.d/98dracut-systemd/dracut-pre-mount.service.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-pivot.service.8.xml" modules.d/98dracut-systemd/dracut-pre-pivot.service.8.adoc
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-trigger.service.8.xml" modules.d/98dracut-systemd/dracut-pre-trigger.service.8.adoc
xsltproc -o "man/dracut.bootup.7" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.bootup.7.xml
asciidoc -a "version=105" -d manpage -b docbook -o "modules.d/98dracut-systemd/dracut-pre-udev.service.8.xml" modules.d/98dracut-systemd/dracut-pre-udev.service.8.adoc
xsltproc -o "modules.d/98dracut-systemd/dracut-initqueue.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-initqueue.service.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-mount.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-mount.service.8.xml
xsltproc -o "man/lsinitrd.1" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/lsinitrd.1.xml
xsltproc -o "man/dracut-catimages.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut-catimages.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-cmdline.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-cmdline.service.8.xml
x86_64-pc-linux-gnu-gcc -Wl,-O1 -Wl,--as-needed -Wl,-z,pack-relative-relocs -o src/install/dracut-install src/install/dracut-install.o src/install/hashmap.o src/install/log.o src/install/strv.o src/install/util.o  -lc -lkmod
cp -a src/util/util dracut-util
xsltproc -o "modules.d/98dracut-systemd/dracut-shutdown.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-shutdown.service.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-mount.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-mount.service.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-trigger.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-trigger.service.8.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-pivot.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-pivot.service.8.xml
xsltproc -o "man/dracut.modules.7" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.modules.7.xml
xsltproc -o "man/dracut.conf.5" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.conf.5.xml
xsltproc -o "modules.d/98dracut-systemd/dracut-pre-udev.service.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98dracut-systemd/dracut-pre-udev.service.8.xml
Note: Writing dracut-initqueue.service.8
Note: Writing dracut-cmdline.service.8
Note: Writing dracut-mount.service.8
Note: Writing dracut-catimages.8
Note: Writing lsinitrd.1
Note: Writing dracut.bootup.7
Note: Writing dracut-shutdown.service.8
Note: Writing dracut-pre-trigger.service.8
Note: Writing dracut-pre-mount.service.8
Note: Writing dracut-pre-pivot.service.8
Note: Writing dracut.modules.7
Note: Writing dracut.conf.5
Note: Writing dracut-pre-udev.service.8
asciidoc: WARNING: dracut.cmdline.7.adoc: line 1095: missing style: [blockdef-listing]: listing
asciidoc: WARNING: dracut.cmdline.7.adoc: line 1111: missing style: [blockdef-listing]: listing
xsltproc -o "man/dracut.8" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.8.xml
xsltproc -o "man/dracut.cmdline.7" -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl man/dracut.cmdline.7.xml
Note: Writing dracut.8
Note: Writing dracut.cmdline.7
asciidoc -a "mainversion=105" \
	-a "version=105" \
	-a numbered \
	-d book -b docbook -o dracut.xml man/dracut.adoc
ln -fs src/install/dracut-install dracut-install
asciidoc: WARNING: dracut.cmdline.7.adoc: line 1095: missing style: [blockdef-listing]: listing
asciidoc: WARNING: dracut.cmdline.7.adoc: line 1111: missing style: [blockdef-listing]: listing
xsltproc -o dracut.html --xinclude -nonet \
	--stringparam custom.css.source docs/dracut.css \
	--stringparam generate.css.header 1 \
	http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml
rm man/dracut.modules.7.xml man/dracut-catimages.8.xml man/dracut.conf.5.xml modules.d/98dracut-systemd/dracut-mount.service.8.xml man/dracut.cmdline.7.xml modules.d/98dracut-systemd/dracut-cmdline.service.8.xml man/dracut.8.xml man/dracut.bootup.7.xml modules.d/98dracut-systemd/dracut-pre-mount.service.8.xml modules.d/98dracut-systemd/dracut-shutdown.service.8.xml modules.d/98dracut-systemd/dracut-pre-trigger.service.8.xml modules.d/98dracut-systemd/dracut-initqueue.service.8.xml modules.d/98dracut-systemd/dracut-pre-pivot.service.8.xml modules.d/98dracut-systemd/dracut-pre-udev.service.8.xml man/lsinitrd.1.xml
>>> Source compiled.
 * Skipping make test/check due to ebuild restriction.
>>> Test phase [disabled because of RESTRICT=test]: sys-kernel/dracut-105

>>> Install sys-kernel/dracut-105 into /var/tmp/portage/sys-kernel/dracut-105/image
make -j17 DESTDIR=/var/tmp/portage/sys-kernel/dracut-105/image install 
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/bin
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/etc
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/modules.d
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man1 /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man5 /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man7 /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man8
install -m 0755 dracut.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/bin/dracut
install -m 0755 dracut-catimages.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/bin/dracut-catimages
install -m 0755 lsinitrd.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/bin/lsinitrd
install -m 0644 dracut.conf /var/tmp/portage/sys-kernel/dracut-105/image/etc/dracut.conf
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/etc/dracut.conf.d
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut.conf.d
install -m 0755 dracut-init.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-init.sh
install -m 0755 dracut-functions.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-functions.sh
install -m 0755 dracut-version.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-version.sh
ln -fs dracut-functions.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-functions
install -m 0755 dracut-logger.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-logger.sh
install -m 0755 dracut-initramfs-restore.sh /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-initramfs-restore
cp -arx modules.d dracut.conf.d /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut
cp -arx test /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut
for i in man/lsinitrd.1; do install -m 0644 $i /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man1/${i##*/}; done
for i in man/dracut.conf.5; do install -m 0644 $i /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man5/${i##*/}; done
for i in man/dracut.cmdline.7 man/dracut.bootup.7 man/dracut.modules.7; do install -m 0644 $i /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man7/${i##*/}; done
for i in man/dracut.8 man/dracut-catimages.8 modules.d/98dracut-systemd/dracut-cmdline.service.8 modules.d/98dracut-systemd/dracut-initqueue.service.8 modules.d/98dracut-systemd/dracut-mount.service.8 modules.d/98dracut-systemd/dracut-shutdown.service.8 modules.d/98dracut-systemd/dracut-pre-mount.service.8 modules.d/98dracut-systemd/dracut-pre-pivot.service.8 modules.d/98dracut-systemd/dracut-pre-trigger.service.8 modules.d/98dracut-systemd/dracut-pre-udev.service.8; do install -m 0644 $i /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man8/${i##*/}; done
ln -fs dracut.cmdline.7 /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/man/man7/dracut.kernel.7
if [ -n "/usr/lib/systemd/system" ]; then \
	mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system; \
	ln -srf /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown-onfailure.service /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system/dracut-shutdown-onfailure.service; \
	ln -srf /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown.service /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system/dracut-shutdown.service; \
	mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system/sysinit.target.wants; \
	ln -s ../dracut-shutdown.service \
	/var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system/sysinit.target.wants/dracut-shutdown.service; \
	mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system/initrd.target.wants; \
	for i in \
	   dracut-cmdline.service \
	   dracut-initqueue.service \
	   dracut-mount.service \
	   dracut-pre-mount.service \
	   dracut-pre-pivot.service \
	   dracut-pre-trigger.service \
	   dracut-pre-udev.service \
	   ; do \
		ln -srf /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/modules.d/98dracut-systemd/$i /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system; \
		ln -s ../$i \
		/var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/systemd/system/initrd.target.wants/$i; \
	done \
fi
if [ -f src/install/dracut-install ]; then \
	install -m 0755 src/install/dracut-install /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-install; \
fi
if [ -f src/skipcpio/skipcpio ]; then \
	install -m 0755 src/skipcpio/skipcpio /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/skipcpio; \
fi
if [ -f dracut-util ]; then \
	install -m 0755 dracut-util /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/dracut/dracut-util; \
fi
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/kernel/install.d
install -m 0755 install.d/50-dracut.install /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/kernel/install.d/50-dracut.install
install -m 0755 install.d/51-dracut-rescue.install /var/tmp/portage/sys-kernel/dracut-105/image/usr/lib/kernel/install.d/51-dracut-rescue.install
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/bash-completion/completions
install -m 0644 shell-completion/bash/dracut /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/bash-completion/completions/dracut
install -m 0644 shell-completion/bash/lsinitrd /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/bash-completion/completions/lsinitrd
mkdir -p /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/pkgconfig
install -m 0644 dracut.pc /var/tmp/portage/sys-kernel/dracut-105/image/usr/share/pkgconfig/dracut.pc
>>> Completed installing sys-kernel/dracut-105 into /var/tmp/portage/sys-kernel/dracut-105/image

 * Final size of build directory: 5464 KiB (5.3 MiB)
 * Final size of installed tree:  4464 KiB (4.3 MiB)

strip: x86_64-pc-linux-gnu-strip --strip-unneeded -N __gentoo_check_ldflags__ -R .comment -R .GCC.command.line -R .note.gnu.gold-version
   /usr/lib/dracut/dracut-install
   /usr/lib/dracut/skipcpio
   /usr/lib/dracut/dracut-util

>>> Installing (1 of 1) sys-kernel/dracut-105::gentoo
 * 
 * Installation of a symlink is blocked by a directory:
 *   '/usr/lib/dracut/modules.d/80test-makeroot'
 * This symlink will be merged with a different name:
 *   '/usr/lib/dracut/modules.d/80test-makeroot.backup.0001'
 * 
 * 
 * Installation of a symlink is blocked by a directory:
 *   '/usr/lib/dracut/modules.d/80test-root'
 * This symlink will be merged with a different name:
 *   '/usr/lib/dracut/modules.d/80test-root.backup.0001'
 * 
 * 
 * Installation of a symlink is blocked by a directory:
 *   '/usr/lib/dracut/modules.d/80test'
 * This symlink will be merged with a different name:
 *   '/usr/lib/dracut/modules.d/80test.backup.0001'
 * 
 * Install additional packages for optional runtime features:
 *   net-fs/cifs-utils for Support CIFS
 *   app-shells/dash for Allows use of dash instead of default bash (on your own risk)
 *   sys-apps/busybox for Allows use of busybox instead of default bash (on your own risk)
 *   sys-block/open-iscsi for Support iSCSI
 *   sys-fs/mdadm for Support MD devices, also known as software RAID devices
 *   sys-fs/dmraid for Support MD devices, also known as software RAID devices
 *   sys-block/nbd for Support network block devices
 *   app-admin/rsyslog for Enable logging with rsyslog
 *   app-crypt/tpm2-tools for Support TPM 2.0 TSS
 *   sys-apps/biosdevname for Support BIOS-given device names
 *   sys-apps/rng-tools for Enable rngd service to help generating entropy early during boot
 *   sys-apps/systemd[boot] for building Unified Kernel Images with dracut (--uefi)
 *   sys-apps/systemd-utils[boot] for building Unified Kernel Images with dracut (--uefi)
 *   sys-kernel/installkernel[dracut,uki] for automatically generating an UKI on each kernel installation

>>> Completed (1 of 1) sys-kernel/dracut-105::gentoo

 * Messages for package sys-kernel/dracut-105:

 * 
 * Installation of a symlink is blocked by a directory:
 *   '/usr/lib/dracut/modules.d/80test-makeroot'
 * This symlink will be merged with a different name:
 *   '/usr/lib/dracut/modules.d/80test-makeroot.backup.0001'
 * 
 * 
 * Installation of a symlink is blocked by a directory:
 *   '/usr/lib/dracut/modules.d/80test-root'
 * This symlink will be merged with a different name:
 *   '/usr/lib/dracut/modules.d/80test-root.backup.0001'
 * 
 * 
 * Installation of a symlink is blocked by a directory:
 *   '/usr/lib/dracut/modules.d/80test'
 * This symlink will be merged with a different name:
 *   '/usr/lib/dracut/modules.d/80test.backup.0001'
 * 
 * Install additional packages for optional runtime features:
 *   net-fs/cifs-utils for Support CIFS
 *   app-shells/dash for Allows use of dash instead of default bash (on your own risk)
 *   sys-apps/busybox for Allows use of busybox instead of default bash (on your own risk)
 *   sys-block/open-iscsi for Support iSCSI
 *   sys-fs/mdadm for Support MD devices, also known as software RAID devices
 *   sys-fs/dmraid for Support MD devices, also known as software RAID devices
 *   sys-block/nbd for Support network block devices
 *   app-admin/rsyslog for Enable logging with rsyslog
 *   app-crypt/tpm2-tools for Support TPM 2.0 TSS
 *   sys-apps/biosdevname for Support BIOS-given device names
 *   sys-apps/rng-tools for Enable rngd service to help generating entropy early during boot
 *   sys-apps/systemd[boot] for building Unified Kernel Images with dracut (--uefi)
 *   sys-apps/systemd-utils[boot] for building Unified Kernel Images with dracut (--uefi)
 *   sys-kernel/installkernel[dracut,uki] for automatically generating an UKI on each kernel installation

 * GNU info directory index is up-to-date.

 * IMPORTANT: 3 config files in '/etc' need updating.
 * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS
 * sections of the emerge man page to learn how to update config files.