net-misc:curl-8.3.0-r2:20231207-002543.log

net-misc:curl-8.3.0-r2:20231207-002543.log (text/plain), 19.63 KB, created by Toralf Förster on 2023-12-07 08:36:38 UTC

 * Package:    net-misc/curl-8.3.0-r2:0
 * Repository: gentoo
 * Maintainer: [e-mail] [e-mail]
 * USE:        abi_x86_64 adns amd64 curl_ssl_openssl elibc_glibc ftp gnutls gopher http2 imap kerberos kernel_linux ldap openssl pop3 progress-meter rustls samba smtp ssh ssl telnet tftp verify-sig
 * FEATURES:   network-sandbox preserve-libs sandbox userpriv usersandbox

>>> Unpacking source...
 * Verifying curl-8.3.0.tar.xz ...
[   INFO] File /var/tmp/portage/net-misc/curl-8.3.0-r2/distdir/curl-8.3.0.tar.xz verified successfully against the signature in /var/tmp/portage/net-misc/curl-8.3.0-r2/distdir/curl-8.3.0.tar.xz.asc:
[   INFO] - status: OpenPGPSignatureStatus.GOOD
[   INFO] - valid: True, trusted: True
[   INFO] - primary key: 27EDEAF22F3ABCEB50DB9A125CC908FDB71E12C2
[   INFO] - subkey: 27EDEAF22F3ABCEB50DB9A125CC908FDB71E12C2
[   INFO] - timestamp: 2023-09-13 06:20:59 UTC
>>> Unpacking curl-8.3.0.tar.xz to /var/tmp/portage/net-misc/curl-8.3.0-r2/work
>>> Unpacking curl-8.3.0.tar.xz.asc to /var/tmp/portage/net-misc/curl-8.3.0-r2/work
unpack curl-8.3.0.tar.xz.asc: file format not recognized. Ignoring.
>>> Source unpacked in /var/tmp/portage/net-misc/curl-8.3.0-r2/work
>>> Preparing source in /var/tmp/portage/net-misc/curl-8.3.0-r2/work/curl-8.3.0 ...
 * Applying curl-prefix.patch ...
 [ ok ]
 * Applying curl-respect-cflags-3.patch ...
 [ ok ]
 * Applying curl-8.3.0-tests-arm-musl.patch ...
patching file configure.ac
Hunk #1 succeeded at 3643 (offset 60 lines).
Hunk #2 succeeded at 3666 (offset 60 lines).
patching file configure.ac
Hunk #1 succeeded at 3644 (offset 60 lines).
patching file lib/formdata.c
 [ ok ]
 * Applying curl-8.3.0-CVE-2023-38545.patch ...
 [ ok ]
 * Applying curl-8.3.0-CVE-2023-38546.patch ...
 [ ok ]
 * Adjusting to prefix /
 *   curl-config.in ...
 [ ok ]
 * Running eautoreconf in '/var/tmp/portage/net-misc/curl-8.3.0-r2/work/curl-8.3.0' ...
 * Running 'libtoolize --install --copy --force --automake' ...
 [ ok ]
 * Running 'aclocal -I m4 --system-acdir=/var/tmp/portage/net-misc/curl-8.3.0-r2/temp/aclocal' ...
 [ ok ]
 * Running 'autoconf --force' ...
 [ ok ]
 * Running 'autoheader' ...
 [ ok ]
 * Running 'automake --add-missing --copy --foreign --force-missing' ...
 [ ok ]
 * Running elibtoolize in: curl-8.3.0/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.3 patch ...
>>> Source prepared.
 * Modern C testing: this build is using a /etc/portage/bashrc hook (2023-11-30T22:24)!
 * Modern C testing: see https://wiki.gentoo.org/wiki/Modern_C_porting for more info.
>>> Configuring source in /var/tmp/portage/net-misc/curl-8.3.0-r2/work/curl-8.3.0 ...
 * abi_x86_64.amd64: running multilib-minimal_abi_src_configure
 * SSL provided by gnutls
 * SSL provided by openssl
 * SSL provided by rustls
 * Default SSL provided by openssl
 * econf: updating curl-8.3.0/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating curl-8.3.0/config.sub with /usr/share/gnuconfig/config.sub
/var/tmp/portage/net-misc/curl-8.3.0-r2/work/curl-8.3.0/configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --datarootdir=/usr/share --disable-dependency-tracking --disable-silent-rules --disable-static --docdir=/usr/share/doc/curl-8.3.0-r2 --htmldir=/usr/share/doc/curl-8.3.0-r2/html --with-sysroot=/ --libdir=/usr/lib64 --without-ca-fallback --with-ca-bundle=/etc/ssl/certs/ca-certificates.crt --without-gnutls --without-mbedtls --without-rustls --with-gnutls --with-ssl --with-ca-path=/etc/ssl/certs --with-rustls --with-default-ssl-backend=openssl --disable-alt-svc --enable-basic-auth --enable-bearer-auth --enable-digest-auth --enable-kerberos-auth --enable-negotiate-auth --enable-aws --enable-dict --disable-ech --enable-file --enable-ftp --enable-gopher --disable-hsts --enable-http --enable-imap --enable-ldap --enable-ldaps --enable-ntlm --disable-ntlm-wb --enable-pop3 --enable-rt --enable-rtsp --enable-smb --with-libssh2 --enable-smtp --enable-telnet --enable-tftp --enable-tls-srp --enable-ares --enable-cookies --enable-dateparse --enable-dnsshuffle --enable-doh --enable-symbol-hiding --enable-http-auth --enable-ipv6 --enable-largefile --enable-manual --enable-mime --enable-netrc --enable-progress-meter --enable-proxy --enable-socketpair --disable-sspi --disable-static --enable-pthreads --enable-threaded-resolver --disable-versioned-symbols --without-amissl --without-bearssl --without-brotli --with-fish-functions-dir=/usr/share/fish/vendor_completions.d --with-nghttp2 --without-hyper --without-libidn2 --with-gssapi=/usr --without-libgsasl --without-libpsl --without-msh3 --without-nghttp3 --without-ngtcp2 --without-quiche --without-librtmp --without-schannel --without-secure-transport --without-test-caddy --without-test-httpd --without-test-nghttpx --disable-websockets --without-winidn --without-wolfssl --with-zlib --without-zstd --with-zsh-functions-dir=/usr/share/zsh/site-functions
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... yes
checking whether to enable debug build options... no
checking whether to enable compiler optimizer... (assumed) yes
checking whether to enable strict compiler warnings... no
checking whether to enable compiler warnings as errors... no
checking whether to enable curl debug memory tracking... no
checking whether to enable hiding of library internal symbols... yes
checking whether to enable c-ares for DNS lookups... yes
checking whether to disable dependency on -lrt... no
checking whether to enable ECH support... no
checking for path separator... :
checking for sed... /usr/bin/sed
checking for grep... /usr/bin/grep
checking that grep -E works... yes
checking for a BSD-compatible install... /usr/lib/portage/python3.11/ebuild-helpers/xattr/install -c
checking for x86_64-pc-linux-gnu-gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether clang accepts -g... yes
checking for clang option to enable C11 features... none needed
checking whether clang understands -c and -o together... yes
checking how to run the C preprocessor... clang-cpp
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for stdatomic.h... yes
checking if _Atomic is available... yes
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for code coverage support... no
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of clang... none
checking curl version... 8.3.0
checking for caddy... no
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking if OS is AIX (to define _ALL_SOURCE)... no
checking if _THREAD_SAFE is already defined... no
checking if _THREAD_SAFE is actually needed... no
checking if _THREAD_SAFE is onwards defined... no
checking if _REENTRANT is already defined... no
checking if _REENTRANT is actually needed... no
checking if _REENTRANT is onwards defined... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by clang... ld.lld
checking if the linker (ld.lld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... llvm-nm
checking the name lister (llvm-nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for ld.lld option to reload object files... -r
checking for x86_64-pc-linux-gnu-file... no
checking for file... file
checking for x86_64-pc-linux-gnu-objdump... llvm-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... x86_64-pc-linux-gnu-dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... llvm-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... llvm-strip
checking for x86_64-pc-linux-gnu-ranlib... llvm-ranlib
checking command to parse llvm-nm output from clang object... ok
checking for sysroot... /
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if clang supports -fno-rtti -fno-exceptions... yes
checking for clang option to produce PIC... -fPIC -DPIC
checking if clang PIC flag -fPIC -DPIC works... yes
checking if clang static flag -static works... no
checking if clang supports -c -o file.o... yes
checking if clang supports -c -o file.o... (cached) yes
checking whether the clang linker (ld.lld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether to build shared libraries with -version-info... yes
checking whether to build shared libraries with -no-undefined... no
checking whether to build shared libraries with -mimpure-text... no
checking whether to build shared libraries with PIC... yes
checking whether to build static libraries with PIC... yes
checking whether to build shared libraries only... yes
checking whether to build static libraries only... no
checking for x86_64-pc-linux-gnu-windres... x86_64-pc-linux-gnu-windres
checking for inline... inline
checking if cpp -P is needed... no
checking if compiler is DEC/Compaq/HP C... no
checking if compiler is HP-UX C... no
checking if compiler is IBM C... no
checking if compiler is Intel C... no
checking if compiler is clang... yes
checking if compiler is xlclang... no
checking if compiler is GNU C... no
checking if compiler is LCC... no
checking if compiler is SGI MIPSpro C... no
checking if compiler is SGI MIPS C... no
checking if compiler is SunPro C... no
checking if compiler is Tiny C... no
checking if compiler accepts some basic options... yes
configure: compiler options added: -Qunused-arguments 
checking if compiler halts on compilation errors... yes
checking if compiler halts on negative sized arrays... yes
checking if compiler halts on function prototype mismatch... yes
checking if compiler supports hiding library internal symbols... yes
checking for windows.h... no
checking whether build target is a native Windows one... no
checking whether build target supports WIN32 file API... no
checking whether build target supports WIN32 crypto API... no
checking for good-to-use Darwin CFLAGS... no
checking whether to link macOS CoreFoundation and SystemConfiguration framework... no
checking to see if the compiler supports __builtin_available()... yes
checking whether to support http... yes
checking whether to support ftp... yes
checking whether to support file... yes
checking whether to support ldap... yes
checking whether to support ldaps... yes
checking whether to support rtsp... yes
checking whether to support proxies... yes
checking whether to support dict... yes
checking whether to support telnet... yes
checking whether to support tftp... yes
checking whether to support pop3... yes
checking whether to support imap... yes
checking whether to support smb... yes
checking whether to support smtp... yes
checking whether to support gopher... yes
checking whether to support mqtt... no
checking whether to provide built-in manual... yes
checking whether to enable generation of C code... yes
checking whether to use libgcc... no
checking if X/Open network library is required... no
checking for gethostbyname... yes
checking for gethostbyname for AmigaOS bsdsocket.library... no
checking for windows.h... (cached) no
checking for winsock2.h... (cached) no
checking for proto/bsdsocket.h... no
checking for connect in libraries... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... yes
checking for monotonic clock_gettime... yes
checking for clock_gettime in libraries... no additional lib required
checking if monotonic clock_gettime works... yes
checking for sys/types.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for raw monotonic clock_gettime... yes
checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking for zlib options with pkg-config... found
checking for zlib.h... yes
configure: found both libz and libz.h header
checking for lber.h... yes
checking for ldap.h... yes
checking for ldap_ssl.h... no
checking for LDAP libraries... -lldap -llber
checking for ldap_url_parse... yes
checking for ldap_init_fd... yes
checking whether to enable IPv6... yes
checking if struct sockaddr_in6 has sin6_scope_id member... yes
checking if argv can be written to... yes
checking if GSS-API support is requested... yes
checking for x86_64-pc-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking for mit-krb5-gssapi options with pkg-config... found
checking for gss.h... no
checking for gssapi/gssapi.h... yes
checking for gssapi/gssapi_generic.h... yes
checking for gssapi/gssapi_krb5.h... yes
checking if GSS-API headers declare GSS_C_NT_HOSTBASED_SERVICE... yes
checking for x86_64-pc-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking for mit-krb5-gssapi options with pkg-config... found
checking if we can link against GSS-API library... yes
checking whether to enable Windows native SSL/TLS... no
checking whether to enable Secure Transport... no
checking whether to enable Amiga native SSL/TLS (AmiSSL v5)... no
checking for x86_64-pc-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking for openssl options with pkg-config... found
configure: pkg-config: SSL_LIBS: "-lssl -lcrypto"
configure: pkg-config: SSL_LDFLAGS: ""
configure: pkg-config: SSL_CPPFLAGS: ""
checking for HMAC_Update in -lcrypto... yes
checking for SSL_connect in -lssl... yes
checking for openssl/x509.h... yes
checking for openssl/rsa.h... yes
checking for openssl/crypto.h... yes
checking for openssl/pem.h... yes
checking for openssl/ssl.h... yes
checking for openssl/err.h... yes
checking for BoringSSL... no
checking for AWS-LC... no
checking for libressl... no
checking for OpenSSL >= v3... yes
checking for "/dev/urandom"... yes
checking for SRP support in OpenSSL... yes
checking for x86_64-pc-linux-gnu-pkg-config... (cached) /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking for gnutls options with pkg-config... found
checking for gnutls_x509_crt_get_dn2 in -lgnutls... yes
configure: detected GnuTLS version 3.8.2
checking for nettle_MD5Init in -lgnutls... no
checking for nettle_MD5Init in -lnettle... yes
checking for gnutls_srp_verifier in -lgnutls... yes
checking for rustls_client_session_read in -lrustls... no
checking for rustls_connection_read in -lrustls... no
configure: error: --with-rustls was specified but could not find rustls.

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/net-misc/curl-8.3.0-r2/work/curl-8.3.0-abi_x86_64.amd64/config.log
 * ERROR: net-misc/curl-8.3.0-r2::gentoo failed (configure phase):
 *   econf failed
 * 
 * Call stack:
 *               ebuild.sh, line  136:  Called src_configure
 *             environment, line 2565:  Called multilib-minimal_src_configure
 *             environment, line 1715:  Called multilib_foreach_abi 'multilib-minimal_abi_src_configure'
 *             environment, line 1965:  Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
 *             environment, line 1670:  Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
 *             environment, line 1668:  Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure'
 *             environment, line  575:  Called multilib-minimal_abi_src_configure
 *             environment, line 1709:  Called multilib_src_configure
 *             environment, line 2245:  Called econf '--without-ca-fallback' '--with-ca-bundle=/etc/ssl/certs/ca-certificates.crt' '--without-gnutls' '--without-mbedtls' '--without-rustls' '--with-gnutls' '--with-ssl' '--with-ca-path=/etc/ssl/certs' '--with-rustls' '--with-default-ssl-backend=openssl' '--disable-alt-svc' '--enable-basic-auth' '--enable-bearer-auth' '--enable-digest-auth' '--enable-kerberos-auth' '--enable-negotiate-auth' '--enable-aws' '--enable-dict' '--disable-ech' '--enable-file' '--enable-ftp' '--enable-gopher' '--disable-hsts' '--enable-http' '--enable-imap' '--enable-ldap' '--enable-ldaps' '--enable-ntlm' '--disable-ntlm-wb' '--enable-pop3' '--enable-rt' '--enable-rtsp' '--enable-smb' '--with-libssh2' '--enable-smtp' '--enable-telnet' '--enable-tftp' '--enable-tls-srp' '--enable-ares' '--enable-cookies' '--enable-dateparse' '--enable-dnsshuffle' '--enable-doh' '--enable-symbol-hiding' '--enable-http-auth' '--enable-ipv6' '--enable-largefile' '--enable-manual' '--enable-mime' '--enable-netrc' '--enable-progress-meter' '--enable-proxy' '--enable-socketpair' '--disable-sspi' '--disable-static' '--enable-pthreads' '--enable-threaded-resolver' '--disable-versioned-symbols' '--without-amissl' '--without-bearssl' '--without-brotli' '--with-fish-functions-dir=/usr/share/fish/vendor_completions.d' '--with-nghttp2' '--without-hyper' '--without-libidn2' '--with-gssapi=/usr' '--without-libgsasl' '--without-libpsl' '--without-msh3' '--without-nghttp3' '--without-ngtcp2' '--without-quiche' '--without-librtmp' '--without-schannel' '--without-secure-transport' '--without-test-caddy' '--without-test-httpd' '--without-test-nghttpx' '--disable-websockets' '--without-winidn' '--without-wolfssl' '--with-zlib' '--without-zstd' '--with-zsh-functions-dir=/usr/share/zsh/site-functions'
 *        phase-helpers.sh, line  732:  Called __helpers_die 'econf failed'
 *   isolated-functions.sh, line  112:  Called die
 * The specific snippet of code:
 *   		die "$@"
 * 
 * If you need support, post the output of `emerge --info '=net-misc/curl-8.3.0-r2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=net-misc/curl-8.3.0-r2::gentoo'`.
 * The complete build log is located at '/var/log/portage/net-misc:curl-8.3.0-r2:20231207-002543.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/net-misc/curl-8.3.0-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-misc/curl-8.3.0-r2/temp/environment'.
 * Working directory: '/var/tmp/portage/net-misc/curl-8.3.0-r2/work/curl-8.3.0-abi_x86_64.amd64'
 * S: '/var/tmp/portage/net-misc/curl-8.3.0-r2/work/curl-8.3.0'