dhcpcd and dmesg logs, addressing the problem

bug_log.txt (text/plain), 1.81 KB, created by ZetaCorvi on 2023-11-30 10:11:11 UTC

demo@ThinkpadP14s ~ $ sudo dhcpcd enp5s0
dhcpcd-10.0.5 starting
DUID 00:01:00:01:2b:ce:c2:a8:4c:03:4f:fb:94:33
enp5s0: waiting for carrier
enp5s0: carrier acquired
enp5s0: IAID 38:cb:27:ac
enp5s0: adding address fe80::86fc:133d:8133:5c93
enp5s0: soliciting an IPv6 router
enp5s0: rebinding lease of 10.0.38.233
ipv6nd_sendrsprobe: No buffer space available
enp5s0: probing address 10.0.38.233/24
ipv6nd_sendrsprobe: No buffer space available
ipv6nd_sendrsprobe: No buffer space available
enp5s0: leased 10.0.38.233 for 86400 seconds
enp5s0: adding route to 10.0.38.0/24
enp5s0: adding default route via 10.0.38.1
demo@ThinkpadP14s ~ $ dmesg | grep eth
[    4.791881] r8169 0000:02:00.0 eth0: RTL8168ep/8111ep, 84:a9:38:cb:27:ad, XID 502, IRQ 77
[    4.791893] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    4.791898] r8169 0000:02:00.0 eth0: DASH disabled
[    4.991530] r8169 0000:02:00.0 eth0: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[    5.136004] r8169 0000:05:00.0 eth1: RTL8168h/8111h, 84:a9:38:cb:27:ac, XID 541, IRQ 96
[    5.136013] r8169 0000:05:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    5.138429] r8169 0000:02:00.0 enp2s0f0: renamed from eth0
[    5.154441] r8169 0000:05:00.0 enp5s0: renamed from eth1
[  104.809690] r8169 0000:02:00.0 eth0: RTL8168ep/8111ep, 84:a9:38:cb:27:ad, XID 502, IRQ 77
[  104.809696] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[  104.809700] r8169 0000:02:00.0 eth0: DASH disabled
[  104.811561] r8169 0000:02:00.0 enp2s0f0: renamed from eth0
[  105.032348] r8169 0000:05:00.0 eth0: RTL8168h/8111h, 84:a9:38:cb:27:ac, XID 541, IRQ 96
[  105.032362] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[  105.033456] r8169 0000:05:00.0 enp5s0: renamed from eth0