dmesg lapic

dmesg_lapic (text/plain), 17.04 KB, created by João Oliveirinha on 2006-04-26 07:17:06 UTC

Linux version 2.6.16-gentoo (root@biskoito) (gcc version 3.4.6 (Gentoo 3.4.6, ssp-3.4.5-1.0, pie-8.7.9)) #2 SMP PREEMPT Sat Apr 1 19:29:14 WEST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ffdfffc (usable)
 BIOS-e820: 000000003ffdfffc - 000000003fffffc0 (ACPI data)
 BIOS-e820: 000000003fffffc0 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262111
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 32735 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 TOSINV                                ) @ 0x000e5010
ACPI: RSDT (v001 TOSINV RSDT_000 0x00000100 ABCD 0x00010200) @ 0x3fff8a07
ACPI: FADT (v001 TOSINV FACP_000 0x00000100 0000 0x00010200) @ 0x3ffffb30
ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x3ffffbc0
ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3fff8bf5
ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3fff8a3b
ACPI: DSDT (v001 TOSINV SONOMA   0x00001004 INTL 0x02002036) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 50000000 (gap: 40000000:bff00000)
Built 1 zonelists
Kernel command line: root=/dev/sda3 lapic
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1995.257 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033688k/1048444k available (3658k kernel code, 14120k reserved, 871k data, 208k init, 130940k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4000.05 BogoMIPS (lpj=8000109)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
SMP motherboard not detected.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xea934, last bus=6
PCI: Using MMCONFIG
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1300-133f claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: Power Resource [PFA1] (off)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:06:06.0
PCI: Bridge: 0000:00:01.0
  IO window: c000-dfff
  MEM window: c0000000-cfffffff
  PREFETCH window: 90000000-9fffffff
PCI: Bridge: 0000:00:1c.0
  IO window: a000-bfff
  MEM window: bc000000-bfffffff
  PREFETCH window: 8c000000-8fffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 8000-9fff
  MEM window: b8000000-bbffffff
  PREFETCH window: 88000000-8bffffff
PCI: Bus 7, cardbus bridge: 0000:06:06.0
  IO window: 00006000-000060ff
  IO window: 00006400-000064ff
  PREFETCH window: 80000000-81ffffff
  MEM window: b2000000-b3ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 6000-7fff
  MEM window: b0000000-b7ffffff
  PREFETCH window: 80000000-87ffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
audit: initializing netlink socket (disabled)
audit(1146064384.856:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 [e-mail]).
NTFS driver 2.1.26 [Flags: R/O].
JFS: nTxBlock = 8077, nTxLock = 64621
SGI XFS with no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN1] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [TZCR] (61 C)
ACPI: Thermal Zone [TZVR] (63 C)
ACPI: Thermal Zone [TZVL] (55 C)
ACPI: Thermal Zone [TZCL] (48 C)
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
mice: PS/2 mouse device common for all mice
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
input: AT Translated Set 2 keyboard as /class/input/input0
ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3468 86:be09 87:6063 88:203f
ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
  Vendor: ATA       Model: FUJITSU MHV2080B  Rev: 0000
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
  Vendor: MATSHITA  Model: DVD-RAM UJ-841S   Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usbmon: debugfs is not available
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite M40 detected, limiting rate to 40pps.
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: HID 062a:0001 as /class/input/input2
input: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20 2006 UTC).
ALSA device list:
  No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8190 buckets, 65520 max) - 172 bytes per conntrack
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
acpi-cpufreq: CPU0 - ACPI performance management activated.
Using IPI Shortcut mode
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 208k freed
kjournald starting.  Commit interval 5 seconds
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v0.15 addr 0xbc000000 irq 11 Yukon-FE (0xb7) rev 1
sky2 eth0: addr 00:a0:d1:29:4c:72
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:06:06.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[b0000000-b00007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b22, devctl 0x66
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
ipw2200: Copyright(c) 2003-2006 Intel Corporation
Yenta: ISA IRQ mask 0x0098, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
cs: IO port probe 0x6000-0x7fff: clean.
pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1e.2 to 64
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d1294c72]
intel8x0_measure_ac97_clock: measured 55517 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
Adding 2072376k swap on /dev/sda2.  Priority:-1 extents:1 across:2072376k
EXT3 FS on sda3, internal journal
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[fglrx] module loaded - fglrx 8.23.7 [Mar  6 2006] on minor 0
[fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
[fglrx] free  PCIe = 51118080
[fglrx] max   PCIe = 51118080
[fglrx] free  LFB = 119762944
[fglrx] max   LFB = 119762944
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total PCIe = 16384
[fglrx] Flat panel plugged in
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none