dmesg output

dmesg.log (text/plain), 15.44 KB, created by Thomas Beutin on 2006-02-22 00:24:34 UTC

Bootdata ok (command line is root=/dev/cciss/c0d0p3 udev)
Linux version 2.6.15-gentoo-r5 (root@banzai) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Wed Feb 15 17:05:34 CET 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000f57f8000 (usable)
 BIOS-e820: 00000000f57f8000 - 00000000f5800000 (ACPI data)
 BIOS-e820: 00000000fdc00000 - 00000000fdc01000 (reserved)
 BIOS-e820: 00000000fdc10000 - 00000000fdc11000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
 BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000003fffff000 (usable)
ACPI: RSDP (v002 HP                                    ) @ 0x00000000000f4f20
ACPI: XSDT (v001 HP     A05      0x00000002 Ò 0x0000162e) @ 0x00000000f57f83e0
ACPI: FADT (v003 HP     A05      0x00000002 Ò 0x0000162e) @ 0x00000000f57f8460
ACPI: MADT (v001 HP     00000083 0x00000002  0x00000000) @ 0x00000000f57f8100
ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000f57f81e0
ACPI: SRAT (v001 HP     A05      0x00000001  0x00000000) @ 0x00000000f57f8260
ACPI: DSDT (v001 HP         DSDT 0x00000001 MSFT 0x02000001) @ 0x0000000000000000
SRAT: PXM 1 -> APIC 0 -> Node 0
SRAT: PXM 2 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 1 -> Node 0
SRAT: PXM 2 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 1 0-200000000
SRAT: Node 1 PXM 2 200000000-400000000
Using 33 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000200000000
Bootmem setup node 1 0000000200000000-00000003fffff000
On node 0 totalpages: 2024640
  DMA zone: 3216 pages, LIFO batch:0
  DMA32 zone: 987184 pages, LIFO batch:31
  Normal zone: 1034240 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
On node 1 totalpages: 2068480
  DMA zone: 0 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 2068480 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28])
IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31
ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32])
IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35
ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36])
IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f6000000 (gap: f5800000:8400000)
Checking aperture...
CPU 0: aperture @ 60000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c000000
Built 2 zonelists
Kernel command line: root=/dev/cciss/c0d0p3 udev
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2205.025 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Memory: 16281780k/16777212k available (1789k kernel code, 322980k reserved, 537k data, 184k init)
Calibrating delay using timer specific routine.. 4419.11 BogoMIPS (lpj=8838228)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Node 0 -> Core 0
mtrr: v2.0 (20020519)
Using local APIC timer interrupts.
Detected 12.528 MHz APIC timer.
Booting processor 1/4 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 4410.31 BogoMIPS (lpj=8820630)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Node 1 -> Core 0
AMD Opteron(tm) Processor 275 stepping 02
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -2 cycles, maxerr 1133 cycles)
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 4410.41 BogoMIPS (lpj=8820837)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2(2) -> Node 0 -> Core 1
AMD Opteron(tm) Processor 275 stepping 02
CPU 2: Syncing TSC to CPU 0.
CPU 2: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 618 cycles)
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 4410.17 BogoMIPS (lpj=8820356)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3(2) -> Node 1 -> Core 1
AMD Opteron(tm) Processor 275 stepping 02
CPU 3: Syncing TSC to CPU 0.
CPU 3: synchronized TSC with CPU 0 (last diff -1 cycles, maxerr 1133 cycles)
Brought up 4 CPUs
Disabling vsyscall due to use of PM timer
time.c: Using PM based timekeeping.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [CFG0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:03.0
ACPI: PCI Interrupt Routing Table [\_SB_.CFG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.CFG0.PCI2._PRT]
ACPI: PCI Root Bridge [CFG1] (0000:04)
PCI: Probing PCI hardware (bus 04)
ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.CFG1.PCI4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c000000 size 65536 KB
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
PCI: Bridge: 0000:00:03.0
  IO window: 4000-4fff
  MEM window: f5f00000-f7dfffff
  PREFETCH window: f8000000-f80fffff
PCI: Bridge: 0000:00:07.0
  IO window: 5000-5fff
  MEM window: f7e00000-f7efffff
  PREFETCH window: f8100000-f81fffff
PCI: Bridge: 0000:00:08.0
  IO window: disabled.
  MEM window: f7f00000-f7ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:04:09.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:04:0a.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
HP CISS Driver (v 2.6.8)
cciss: Device 0x46 has been found at bus 2 dev 4 func 0
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 24 (level, low) -> IRQ 16
cciss: using DAC cycles
input: AT Translated Set 2 keyboard as /class/input/input0
      blocks= 573472305 block_size= 512
      heads= 255, sectors= 63, cylinders= 35697

      blocks= 573472305 block_size= 512
      heads= 255, sectors= 63, cylinders= 35697

 cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 >
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 31254416k swap on /dev/cciss/c0d0p11.  Priority:-1 extents:1 across:31254416k
EXT3-fs warning: checktime reached, running e2fsck is recommended
EXT3 FS on cciss/c0d0p3, internal journal
NET: Registered protocol family 17
loop: loaded (max 8 devices)
tg3.c:v3.47 (Dec 28, 2005)
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 28 (level, low) -> IRQ 17
eth0: Tigon3 [partno(349321-001) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:38:4f:ac:5c
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] 
eth0: dma_rwctrl[769f4000]
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:03:06.1[B] -> GSI 29 (level, low) -> IRQ 18
eth1: Tigon3 [partno(349321-001) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:14:38:4f:ac:5b
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
eth1: dma_rwctrl[769f4000]
ReiserFS: cciss/c0d0p2: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p2: using ordered data mode
ReiserFS: cciss/c0d0p2: journal params: device cciss/c0d0p2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p2: checking transaction log (cciss/c0d0p2)
ReiserFS: cciss/c0d0p2: Using r5 hash to sort names
ReiserFS: cciss/c0d0p5: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p5: using ordered data mode
ReiserFS: cciss/c0d0p5: journal params: device cciss/c0d0p5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p5: checking transaction log (cciss/c0d0p5)
ReiserFS: cciss/c0d0p5: Using r5 hash to sort names
ReiserFS: cciss/c0d0p5: Removing [3747 157703 0x0 SD]..done
ReiserFS: cciss/c0d0p5: Removing [3747 151053 0x0 SD]..done
ReiserFS: cciss/c0d0p5: Removing [3747 151033 0x0 SD]..done
ReiserFS: cciss/c0d0p5: There were 3 uncompleted unlinks/truncates. Completed
ReiserFS: cciss/c0d0p9: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p9: using ordered data mode
ReiserFS: cciss/c0d0p9: journal params: device cciss/c0d0p9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p9: checking transaction log (cciss/c0d0p9)
ReiserFS: cciss/c0d0p9: Using r5 hash to sort names
ReiserFS: cciss/c0d0p9: Removing [6 586682 0x0 SD]..done
ReiserFS: cciss/c0d0p9: There were 1 uncompleted unlinks/truncates. Completed
ReiserFS: cciss/c0d0p7: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p7: using ordered data mode
ReiserFS: cciss/c0d0p7: journal params: device cciss/c0d0p7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p7: checking transaction log (cciss/c0d0p7)
ReiserFS: cciss/c0d0p7: Using r5 hash to sort names
ReiserFS: cciss/c0d0p8: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p8: using ordered data mode
ReiserFS: cciss/c0d0p8: journal params: device cciss/c0d0p8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p8: checking transaction log (cciss/c0d0p8)
ReiserFS: cciss/c0d0p8: Using r5 hash to sort names
ReiserFS: cciss/c0d0p6: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p6: using ordered data mode
ReiserFS: cciss/c0d0p6: journal params: device cciss/c0d0p6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p6: checking transaction log (cciss/c0d0p6)
ReiserFS: cciss/c0d0p6: Using r5 hash to sort names
ReiserFS: cciss/c0d0p10: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p10: using ordered data mode
ReiserFS: cciss/c0d0p10: journal params: device cciss/c0d0p10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p10: checking transaction log (cciss/c0d0p10)
ReiserFS: cciss/c0d0p10: Using r5 hash to sort names
ReiserFS: cciss/c0d0p12: found reiserfs format "3.6" with standard journal
ReiserFS: cciss/c0d0p12: using ordered data mode
ReiserFS: cciss/c0d0p12: journal params: device cciss/c0d0p12, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: cciss/c0d0p12: checking transaction log (cciss/c0d0p12)
ReiserFS: cciss/c0d0p12: Using r5 hash to sort names
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:01:00.0: OHCI Host Controller
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:00.0: irq 19, io mem 0xf7df0000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:01:00.1: OHCI Host Controller
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.1: irq 19, io mem 0xf7de0000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.3
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
tg3: eth1: Link is up at 1000 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.