tail from /var/log/kernel/current with skge driver.

kernel.txt (text/plain), 1.34 KB, created by Marco Clocchiatti on 2006-02-18 04:16:47 UTC

Feb 18 10:47:41 [kernel] nfsd: last server has exited
Feb 18 10:48:44 [kernel] Linux version 2.6.15-reiser4-r1 (root@linux99) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #11 Sat Feb 18 09:09:43 CET 2006
Feb 18 10:48:45 [kernel] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Feb 18 10:48:45 [kernel] libata version 1.20 loaded.
Feb 18 10:48:45 [kernel] sata_via 0000:00:0f.0: version 1.1
Feb 18 10:48:45 [kernel] ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 17
Feb 18 10:48:45 [kernel] ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 17
Feb 18 10:48:45 [kernel] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f
Feb 18 10:48:45 [kernel] ata1: dev 0 configured for UDMA/133
Feb 18 10:48:45 [kernel] ata2: no device found (phy stat 00000000)
Feb 18 10:48:45 [kernel]   Vendor: ATA       Model: Maxtor 6L200M0    Rev: BANC
Feb 18 10:48:45 [kernel] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
Feb 18 10:48:46 [kernel] sd 0:0:0:0: Attached scsi disk sda
Feb 18 10:48:46 [kernel] sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 18 10:48:46 [kernel] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
Feb 18 10:48:49 [kernel] skge eth0: enabling interface
Feb 18 10:48:51 [kernel] skge eth0: Link is up at 100 Mbps, half duplex, flow control none