dev-util:systemtap-4.5:20210606-205744.log

dev-util:systemtap-4.5:20210606-205744.log (text/plain), 19.90 KB, created by Toralf Förster on 2021-06-07 06:40:06 UTC

 * Package:    dev-util/systemtap-4.5
 * Repository: gentoo
 * Maintainer: [e-mail]
 * USE:        abi_x86_64 amd64 elibc_glibc kernel_linux python_single_target_python3_9 ssl userland_GNU
 * FEATURES:   network-sandbox preserve-libs sandbox splitdebug userpriv usersandbox
 * Determining the location of the kernel source code
 * Unable to find kernel sources at /usr/src/linux
 * Please make sure that /usr/src/linux points at your running kernel, 
 * (or the kernel you wish to build against).
 * Alternatively, set the KERNEL_DIR environment variable to the kernel sources location
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 * Checking for suitable kernel configuration options...
 *   systemtap requires support for KProbes Instrumentation (KPROBES) - this can be enabled in 'Instrumentation Support -> Kprobes'.
 *   systemtap works with support for user space relay support (RELAY) - this can be enabled in 'General setup -> Kernel->user space relay support (formerly relayfs)'.
 *   systemtap works best with support for Debug Filesystem (DEBUG_FS) - this can be enabled in 'Kernel hacking -> Debug Filesystem'.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 * Using python3.9 to build
>>> Unpacking source...
>>> Unpacking systemtap-4.5.tar.gz to /var/tmp/portage/dev-util/systemtap-4.5/work
>>> Source unpacked in /var/tmp/portage/dev-util/systemtap-4.5/work
>>> Preparing source in /var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5 ...
 * Fixing shebang in ./testsuite/systemtap.python/celsius.py.
 * Fixing shebang in ./testsuite/systemtap.examples/general/pyexample.py.
 * Fixing shebang in ./stap-exporter/stap-exporter.in.
 * Fixing shebang in ./scripts/update-syscall-docs.
 * Fixing shebang in ./scripts/kprobes_test/stap_run_module.py.
 * Fixing shebang in ./scripts/kprobes_test/stap_probes_test.py.
 * Fixing shebang in ./scripts/kprobes_test/stap_gen_code.py.
 * Fixing shebang in ./scripts/kprobes_test/run_module.py.
 * Fixing shebang in ./scripts/kprobes_test/readelf.py.
 * Fixing shebang in ./scripts/kprobes_test/monitor_system.py.
 * Fixing shebang in ./scripts/kprobes_test/kprobes_test.py.
 * Fixing shebang in ./scripts/kprobes_test/is_probed.py.
 * Fixing shebang in ./scripts/kprobes_test/gen_code.py.
 * Fixing shebang in ./httpd/docker/fedora_install_package.py.
 * Fixing shebang in ./httpd/client.py.
 * Applying systemtap-3.1-ia64.patch ...
 [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5 ...
 * econf: updating systemtap-4.5/config.sub with /usr/share/gnuconfig/config.sub
 * econf: updating systemtap-4.5/config.guess with /usr/share/gnuconfig/config.guess
./configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-dependency-tracking --disable-silent-rules --docdir=/usr/share/doc/systemtap-4.5 --htmldir=/usr/share/doc/systemtap-4.5/html --libdir=/usr/lib64 --disable-docs --disable-grapher --disable-refdocs --disable-server --enable-pie --with-python3 --without-java --without-openssl --without-python2-probes --without-rpm --disable-virt --disable-sqlite --without-avahi --with-nss --without-selinux
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking for a BSD-compatible install... /usr/lib/portage/python3.9/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... (cached) yes
checking whether make supports the include directive... yes (GNU style)
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking whether x86_64-pc-linux-gnu-gcc understands -c and -o together... yes
checking dependency style of x86_64-pc-linux-gnu-gcc... none
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether ln -s works... yes
checking for x86_64-pc-linux-gnu-gcc... (cached) x86_64-pc-linux-gnu-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... (cached) yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... (cached) none needed
checking whether x86_64-pc-linux-gnu-gcc understands -c and -o together... (cached) yes
checking dependency style of x86_64-pc-linux-gnu-gcc... (cached) none
checking for x86_64-pc-linux-gnu-g++... x86_64-pc-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether x86_64-pc-linux-gnu-g++ accepts -g... yes
checking dependency style of x86_64-pc-linux-gnu-g++... none
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking the archiver (x86_64-pc-linux-gnu-ar) interface... ar
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking whether make sets $(MAKE)... (cached) yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for ppoll... yes
checking for openat... yes
checking for a sed that does not truncate output... /bin/sed
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/gmsgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for python... /var/tmp/portage/dev-util/systemtap-4.5/temp/python3.9/bin/python
checking whether /var/tmp/portage/dev-util/systemtap-4.5/temp/python3.9/bin/python is version 2 or 3... 3
checking whether /usr/bin/python3.9 version is >= 2.6... yes
checking for /usr/bin/python3.9 version... 3.9
checking for /usr/bin/python3.9 platform... linux
checking for /usr/bin/python3.9 script directory... ${prefix}/lib/python3.9/site-packages
checking for /usr/bin/python3.9 extension module directory... ${exec_prefix}/lib/python3.9/site-packages
checking for python... /usr/bin/python3.9
checking for python3 version... 3.9
checking for python3 platform... linux
checking for python3 script directory... ${prefix}/lib/python3.9/site-packages
checking for python3 extension module directory... ${exec_prefix}/lib/python3.9/site-packages
checking to see if prologue searching should be the default... no
checking to see if sdt probes should be the default... yes
checking whether x86_64-pc-linux-gnu-g++ supports C++11 features by default... yes
configure: Compiling with gcc -fstack-protector-all et al.
configure: Compiling with gcc pie et al.
checking whether to use debuginfod... auto
checking for x86_64-pc-linux-gnu-pkg-config... /usr/bin/x86_64-pc-linux-gnu-pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for debuginfod... no
configure: WARNING: libdebuginfod is missing or unusable; some features may be unavailable.
checking for latex... no
checking for dvips... no
checking for ps2pdf... no
checking for xmlto... yes
checking for fop... no
checking for xmlto --stringparam support... yes
checking for nss... yes
configure: using dracut module directory /usr/lib/dracut/modules.d/99stap
configure: using dracut binary /sbin
configure: WARNING: some compile-server functionality will be restricted, cannot find avahi development files
checking how to link readline libs... -lreadline
checking for ebl_strtabinit in -lebl... no
checking for dwfl_module_getsym in -ldw... yes
checking for dwarf_next_unit in -ldw... yes
configure: stap will link  -Wl,--start-group -ldw  -Wl,--end-group -lelf
checking for elf_getshdrstrndx in -lelf... yes
configure: staprun will link  -lelf
configure: stapbpf will link  -lelf
checking how to run the C++ preprocessor... x86_64-pc-linux-gnu-g++ -E
checking boost/utility/string_ref.hpp usability... no
checking boost/utility/string_ref.hpp presence... no
checking for boost/utility/string_ref.hpp... no
checking need for -lboost_system library... nope
configure: checking dyninst support
checking BPatch_object.h usability... no
checking BPatch_object.h presence... no
checking for BPatch_object.h... no
checking for libvirt... no
checking for libxml2... yes
checking for python3.9-config... /usr/bin/python3.9-config
checking Python.h usability... yes
checking Python.h presence... yes
checking for Python.h... yes
checking for jsonc... yes
checking for ncurses... yes
checking for assembler .section "?" flags support... yes
checking whether BPF_PROG_TYPE_PERF_EVENT is declared... yes
checking whether BPF_PROG_TYPE_RAW_TRACEPOINT is declared... yes
checking whether F_SETPIPE_SZ is declared... yes
checking for javac... no
checking for jar... no
configure: WARNING: will not run per-method java probing, missing byteman or java requirements
configure: Adding extra version 
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating includes/sys/sdt-config.h
config.status: creating po/Makefile.in
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating man/Makefile
config.status: creating man/cs/Makefile
config.status: creating doc/beginners/Makefile
config.status: creating doc/SystemTap_Tapset_Reference/Makefile
config.status: creating man/stap.1
config.status: creating man/stappaths.7
config.status: creating man/systemtap-service.8
config.status: creating man/cs/stap.1
config.status: creating man/cs/stappaths.7
config.status: creating man/cs/systemtap.8
config.status: creating initscript/config.systemtap
config.status: creating initscript/config.stap-server
config.status: creating initscript/systemtap
config.status: creating initscript/stap-server
config.status: creating initscript/99stap/module-setup.sh
config.status: creating initscript/99stap/install
config.status: creating initscript/99stap/check
config.status: creating run-stap
config.status: creating dtrace
config.status: creating stapdyn/Makefile
config.status: creating java/Makefile
config.status: creating java/stapbm
config.status: creating java/org/systemtap/byteman/helper/HelperSDT.java
config.status: creating python/Makefile
config.status: creating staprun/Makefile
config.status: creating stapbpf/Makefile
config.status: creating httpd/Makefile
config.status: creating httpd/docker/Makefile
config.status: creating staprun/run-staprun
config.status: creating staprun/guest/stapshd
config.status: creating staprun/guest/stapsh-daemon
config.status: creating staprun/guest/stapsh@.service
config.status: creating stap-exporter/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing doc/beginners commands
=== configuring in testsuite (/var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5/testsuite)
configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr'  '--build=x86_64-pc-linux-gnu' '--host=x86_64-pc-linux-gnu' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--datadir=/usr/share' '--sysconfdir=/etc' '--localstatedir=/var/lib' '--disable-dependency-tracking' '--disable-silent-rules' '--docdir=/usr/share/doc/systemtap-4.5' '--htmldir=/usr/share/doc/systemtap-4.5/html' '--libdir=/usr/lib64' '--disable-docs' '--disable-grapher' '--disable-refdocs' '--disable-server' '--enable-pie' '--with-python3' '--without-java' '--without-openssl' '--without-python2-probes' '--without-rpm' '--disable-virt' '--disable-sqlite' '--without-avahi' '--with-nss' '--without-selinux' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=x86_64-pc-linux-gnu' 'CFLAGS=-pipe -march=native -fno-diagnostics-color ' 'LDFLAGS=-Wl,-O1 -Wl,--as-needed -Wl,--defsym=__gentoo_check_ldflags__=0' 'CXXFLAGS=-pipe -march=native -fno-diagnostics-color ' 'PYTHON=/usr/bin/python3.9' 'PKG_CONFIG_PATH=/var/tmp/portage/dev-util/systemtap-4.5/temp/python3.9/pkgconfig' 'python=/usr/bin/python3.9' 'pyexecdir=${exec_prefix}/lib/python3.9/site-packages' 'python3=/usr/bin/python3.9' 'py3execdir=${exec_prefix}/lib/python3.9/site-packages' --cache-file=/dev/null --srcdir=.
checking for a BSD-compatible install... /usr/lib/portage/python3.9/ebuild-helpers/xattr/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
configure: Will test no apps from: xulrunner tcl postgres mysql java busybox 
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5 ...
make -j3 
sed -e "s#@pkgdatadir@#/usr/share/systemtap#g" < macros.systemtap.in > macros.systemtap
/bin/sh ./git_version.sh -k -s . -o git_version.h
git_version.sh: Output is new file, creating git_version.h
make  all-recursive
make[1]: Entering directory '/var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5'
Making all in .
make[2]: Entering directory '/var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5'
x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I.  -DBINDIR='"/usr/bin"' -DSYSCONFDIR='"/etc"' -DPKGDATADIR='"/usr/share/systemtap"' -DPKGLIBDIR='"/usr/libexec/systemtap"' -DLOCALEDIR='"/usr/share/locale"' -DDOCDIR='"/usr/share/doc/systemtap-4.5"' -DPYEXECDIR='"/usr/lib/python3.9/site-packages"' -DPY3EXECDIR='"/usr/lib/python3.9/site-packages"' -I./includes -I./includes/sys -DSTAP_SDT_V2  -I/usr/include/nss -I/usr/include/nspr   -Wall -Wextra -Werror -fPIE  -I/usr/include/nss -I/usr/include/nspr  -fstack-protector-all -D_FORTIFY_SOURCE=2 -pipe -march=native -fno-diagnostics-color  -c -o stap-main.o `test -f 'main.cxx' || echo './'`main.cxx
x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I.  -DBINDIR='"/usr/bin"' -DSYSCONFDIR='"/etc"' -DPKGDATADIR='"/usr/share/systemtap"' -DPKGLIBDIR='"/usr/libexec/systemtap"' -DLOCALEDIR='"/usr/share/locale"' -DDOCDIR='"/usr/share/doc/systemtap-4.5"' -DPYEXECDIR='"/usr/lib/python3.9/site-packages"' -DPY3EXECDIR='"/usr/lib/python3.9/site-packages"' -I./includes -I./includes/sys -DSTAP_SDT_V2  -I/usr/include/nss -I/usr/include/nspr   -Wall -Wextra -Werror -fPIE  -I/usr/include/nss -I/usr/include/nspr  -fstack-protector-all -D_FORTIFY_SOURCE=2 -pipe -march=native -fno-diagnostics-color  -c -o stap-session.o `test -f 'session.cxx' || echo './'`session.cxx
x86_64-pc-linux-gnu-g++ -DHAVE_CONFIG_H -I.  -DBINDIR='"/usr/bin"' -DSYSCONFDIR='"/etc"' -DPKGDATADIR='"/usr/share/systemtap"' -DPKGLIBDIR='"/usr/libexec/systemtap"' -DLOCALEDIR='"/usr/share/locale"' -DDOCDIR='"/usr/share/doc/systemtap-4.5"' -DPYEXECDIR='"/usr/lib/python3.9/site-packages"' -DPY3EXECDIR='"/usr/lib/python3.9/site-packages"' -I./includes -I./includes/sys -DSTAP_SDT_V2  -I/usr/include/nss -I/usr/include/nspr   -Wall -Wextra -Werror -fPIE  -I/usr/include/nss -I/usr/include/nspr  -fstack-protector-all -D_FORTIFY_SOURCE=2 -pipe -march=native -fno-diagnostics-color  -c -o stap-parse.o `test -f 'parse.cxx' || echo './'`parse.cxx
In file included from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/x86_64-pc-linux-gnu/bits/os_defines.h:39,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/x86_64-pc-linux-gnu/bits/c++config.h:571,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/bits/stl_algobase.h:59,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/bits/stl_tree.h:63,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/map:60,
                 from staptree.h:13,
                 from main.cxx:12:
/usr/include/features.h:397:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
  397 | #  warning _FORTIFY_SOURCE requires compiling with optimization (-O)
      |    ^~~~~~~
In file included from /usr/include/libintl.h:23,
                 from session.h:14,
                 from session.cxx:10:
/usr/include/features.h:397:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
  397 | #  warning _FORTIFY_SOURCE requires compiling with optimization (-O)
      |    ^~~~~~~
In file included from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/x86_64-pc-linux-gnu/bits/os_defines.h:39,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/x86_64-pc-linux-gnu/bits/c++config.h:571,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/bits/stl_algobase.h:59,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/bits/stl_tree.h:63,
                 from /usr/lib/gcc/x86_64-pc-linux-gnu/11.1.0/include/g++-v11/map:60,
                 from staptree.h:13,
                 from parse.cxx:13:
/usr/include/features.h:397:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
  397 | #  warning _FORTIFY_SOURCE requires compiling with optimization (-O)
      |    ^~~~~~~
cc1plus: all warnings being treated as errors
make[2]: *** [Makefile:1204: stap-session.o] Error 1
make[2]: *** Waiting for unfinished jobs....
cc1plus: all warnings being treated as errors
make[2]: *** [Makefile:1190: stap-main.o] Error 1
cc1plus: all warnings being treated as errors
make[2]: *** [Makefile:1218: stap-parse.o] Error 1
make[2]: Leaving directory '/var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5'
make[1]: *** [Makefile:2109: all-recursive] Error 1
make[1]: Leaving directory '/var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5'
make: *** [Makefile:791: all] Error 2
 * ERROR: dev-util/systemtap-4.5::gentoo failed (compile phase):
 *   emake failed
 * 
 * If you need support, post the output of `emerge --info '=dev-util/systemtap-4.5::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=dev-util/systemtap-4.5::gentoo'`.
 * The complete build log is located at '/var/log/portage/dev-util:systemtap-4.5:20210606-205744.log'.
 * For convenience, a symlink to the build log is located at '/var/tmp/portage/dev-util/systemtap-4.5/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/dev-util/systemtap-4.5/temp/environment'.
 * Working directory: '/var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5'
 * S: '/var/tmp/portage/dev-util/systemtap-4.5/work/systemtap-4.5'