modules.conf

modules.conf (text/plain), 4.14 KB, created by Benjamin Collar on 2005-10-10 12:35:15 UTC

### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update.
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-175	agpgart
alias char-major-10-200	tun
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0	loop_gen
alias loop-xfer-3	loop_fish2
alias loop-xfer-gen-10	loop_gen
alias cipher-2		des
alias cipher-3		fish2
alias cipher-4		blowfish
alias cipher-6		idea
alias cipher-7		serp6f
alias cipher-8		mars6
alias cipher-11		rc62
alias cipher-15		dfc2
alias cipher-16		rijndael
alias cipher-17		rc5

# Support for i2c and lm_sensors
alias char-major-89    i2c-dev

# Old nvidia support ...
alias char-major-195 NVdriver 
alias /dev/nvidiactl char-major-195 

### modules-update: end processing /etc/modules.d/aliases

### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.2 2004/07/18 03:40:55 dragonheart Exp $

# ALSA portion
# OSS/Free portion

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
## alias snd-card-0 snd-interwave
alias snd-card-0 snd-via82xx
##  OSS/Free portion
alias sound-slot-0 snd-card-0
##

# OSS/Free portion - card #1
##  OSS/Free portion - card #2
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.9a ---
#alias snd-card-0 snd-via82xx
#alias sound-slot-0 snd-via82xx
# --- END: Generated by ALSACONF, do not edit. ---


### modules-update: end processing /etc/modules.d/alsa

### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### modules-update: end processing /etc/modules.d/i386

### modules-update: start processing /etc/modules.d/nvidia
# Nvidia drivers support
alias char-major-195 nvidia
alias /dev/nvidiactl char-major-195

# To tweak the driver the following options can be used, note that
# you should be careful, as it could cause instability!! For more 
# option see /usr/share/doc/nvidia-kernel-1.0.6629-r4/README.gz 
#
#   To enable Side Band Adressing:  NVreg_EnableAGPSBA=1
#
#   To enable Fast Writes: NVreg_EnableAGPFW=1
#
# To enable both for instance, uncomment following line:
#
#options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1


### modules-update: end processing /etc/modules.d/nvidia

### modules-update: start processing /etc/modules.d/svgalib
probeall  /dev/svga  svgalib_helper

### modules-update: end processing /etc/modules.d/svgalib

### modules-update: start processing /etc/modules.d/svgalib_helper
# modules.d configuration file for SVGALIB_HELPER


# Configurable module parameters
# ------------------------------
# debug:	Debug output level.
# all_devices:	Give access to all PCI devices, regardless of class.

probeall /dev/svga svgalib_helper


### modules-update: end processing /etc/modules.d/svgalib_helper