dmesg 2.6.13-rc6-irqfixup-notworking

2.6.13-rc6-irqfixup-notworking (text/plain), 18.38 KB, created by Hans-Christian Armingeon on 2005-08-08 14:13:51 UTC

Linux version 2.6.13-rc6 (root@jathgentoo) (gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) #1 Mon Aug 8 18:43:12 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000fa980
ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 INTL 0x02002024) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: real_root=/dev/ide/host0/bus0/target0/lun0/part5 root=/dev/ram0 init=/linuxrc ramdisk=8192 irqfixup
Misrouted IRQ fixup support enabled.
This may impact system performance.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01402000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1861.522 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513604k/524224k available (2366k kernel code, 10036k reserved, 974k data, 288k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3725.62 BogoMIPS (lpj=7451241)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD mobile AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
checking if image is initramfs... it is
Freeing initrd memory: 1240k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [LPTP] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: dfe00000-dfefffff
  PREFETCH window: cfd00000-dfcfffff
PCI: Bus 2, cardbus bridge: 0000:00:0b.0
  IO window: 00004000-00004fff
  IO window: 00005000-00005fff
  PREFETCH window: 20000000-21ffffff
  MEM window: 22000000-23ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:0b.0 to 64
TC classifier action (bugs to [e-mail] cc [e-mail])
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:02' and the driver 'system'
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1123541214.444:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (75 C)
Using generic hotkey driver
ibm_acpi: Using generic hotkey driver
toshiba_acpi: Using generic hotkey driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:08' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9100822A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ASUS SCB-2408, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
hda: max request size: 128KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  2450.000 MB/sec
raid5: using function: pIII_sse (2450.000 MB/sec)
raid6: int32x1    768 MB/s
raid6: int32x2   1015 MB/s
raid6: int32x4    654 MB/s
raid6: int32x8    583 MB/s
raid6: mmxx1     1574 MB/s
raid6: mmxx2     2801 MB/s
raid6: sse1x1    1524 MB/s
raid6: sse1x2     893 MB/s
raid6: using algorithm sse1x1 (1524 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [e-mail]
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
Detected 1861.794 MHz processor.
powernow: SGTC: 13333
powernow: Minimum speed 864 MHz. Maximum speed 1861 MHz.
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 USB1 USB2 USB3 EHCI  EC0  LID  AC9  MC9 ILAN SLPB 
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 288k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 10, io mem 0xdffff700
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
input: AT Translated Set 2 keyboard on isa0060/serio0
usb 1-3: new high speed USB device using ehci_hcd and address 3
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Initializing USB Mass Storage driver...
usb 1-3.1: new low speed USB device using ehci_hcd and address 5
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.3-3.1
usb 1-3.4: new low speed USB device using ehci_hcd and address 6
input: USB HID v1.00 Mouse [Kensington USB/PS2 Expert Mouse] on usb-0000:00:10.3-3.4
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 11, io base 0x0000dc00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 5, io base 0x0000e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 5, io base 0x0000e400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
usb 2-1: new low speed USB device using uhci_hcd and address 2
ohci1394: $Rev: 1299 $ Ben Collins <[e-mail]>
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: Remapped memory spaces reg 0xe088c800
ohci1394: fw-host0: Soft reset finished
ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: 0000000f
ohci1394: fw-host0: 4 iso receive contexts available
ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: 000000ff
ohci1394: fw-host0: 8 iso transmit contexts available
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=1 initialized
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]
ieee1394: CSR: setting expire to 25, HZ=250
sbp2: $Rev: 1306 $ Ben Collins <[e-mail]>
input: USB HID v1.00 Keyboard [Cherry GmbH Cherry Slim Line Trackball Keyboard] on usb-0000:00:10.0-1
input: USB HID v1.00 Mouse [Cherry GmbH Cherry Slim Line Trackball Keyboard] on usb-0000:00:10.0-1
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: fw-host0: IntEvent: 00030010
ohci1394: fw-host0: irq_handler: Bus reset requested
ohci1394: fw-host0: Cancel request received
ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
ohci1394: fw-host0: SelfID packet 0x807f8952 received
ieee1394: Including SelfID 0x52897f80
ohci1394: fw-host0: SelfID for this node is 0x807f8952
ohci1394: fw-host0: SelfID complete
ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0
ieee1394: NodeMgr: Processing host reset for knodemgrd_0
ohci1394: fw-host0: Single packet rcv'd
ohci1394: fw-host0: Got phy packet ctx=0 ... discarded
ieee1394: send packet local: ffc00140 ffc0ffff f0000400
ieee1394: received packet: ffc00140 ffc0ffff f0000400
ieee1394: send packet local: ffc00160 ffc00000 00000000 f0bf0404
ieee1394: received packet: ffc00160 ffc00000 00000000 f0bf0404
ieee1394: send packet local: ffc00540 ffc0ffff f0000404
ieee1394: received packet: ffc00540 ffc0ffff f0000404
ieee1394: send packet local: ffc00560 ffc00000 00000000 34393331
ieee1394: received packet: ffc00560 ffc00000 00000000 34393331
ieee1394: send packet local: ffc00940 ffc0ffff f0000408
ieee1394: received packet: ffc00940 ffc0ffff f0000408
ieee1394: send packet local: ffc00960 ffc00000 00000000 32a264e0
ieee1394: received packet: ffc00960 ffc00000 00000000 32a264e0
ieee1394: send packet local: ffc00d40 ffc0ffff f000040c
ieee1394: received packet: ffc00d40 ffc0ffff f000040c
ieee1394: send packet local: ffc00d60 ffc00000 00000000 430d0300
ieee1394: received packet: ffc00d60 ffc00000 00000000 430d0300
ieee1394: send packet local: ffc01140 ffc0ffff f0000410
ieee1394: received packet: ffc01140 ffc0ffff f0000410
ieee1394: send packet local: ffc01160 ffc00000 00000000 f3111225
ieee1394: received packet: ffc01160 ffc00000 00000000 f3111225
ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000
ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000
ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000
ieee1394: received packet: ffc01570 ffc00000 00000000 04000000
ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d43251211f3]
ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0
ohci1394: fw-host0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0, speed=0
ohci1394: fw-host0: Starting transmit DMA ctx=0
ohci1394: fw-host0: IntEvent: 00000001
ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011
ohci1394: fw-host0: Packet sent to node 63 tcode=0x0 tLabel=0 ack=0x11 spd=0 data=0x1F0000C0 ctx=0
NET: Registered protocol family 1
eth1394: $Rev: 1264 $ Ben Collins <[e-mail]>
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ohci1394: fw-host0: ohci_iso_recv_init: packet-per-buffer mode, DMA buffer is 16 pages (65536 bytes), using 16 blocks, buf_stride 4096, block_irq_interval 1
Adding 987956k swap on /dev/hda6.  Priority:-1 extents:1
EXT3 FS on hda5, internal journal
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
NTFS driver 2.1.23 [Flags: R/W DEBUG MODULE].
NTFS volume version 3.1.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 (c) Dave Jones
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:00:0b.0 [1584:3000]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0088, PCI irq 5
Socket status: 30000007
irda_init()
NET: Registered protocol family 23
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
eth1: VIA Rhine II at 0xdffff600, 00:03:0d:02:48:56, IRQ 11.
eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:00' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Real Time Clock Driver v1.12
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
input: PC Speaker
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
lp0: using parport0 (interrupt-driven).
lp0: console ready