dmesg

dmesg (text/plain), 28.02 KB, created by Hans-Christian Armingeon on 2005-06-15 10:19:03 UTC

Linux version 2.6.11-gentoo-r10 (root@jathgentoo) (gcc version 3.4.4 (Gentoo 3.4.4, ssp-3.4.4-1.0, pie-8.7.8)) #1 Tue Jun 7 22:13:41 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d8000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                   ) @ 0x000fa980
ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 INTL 0x02002024) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: real_root=/dev/ide/host0/bus0/target0/lun0/part5 root=/dev/ram0 init=/linuxrc ramdisk=8192
__iounmap: bad address c00fffd9
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01402000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1862.305 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513344k/524224k available (2297k kernel code, 10292k reserved, 927k data, 296k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3694.59 BogoMIPS (lpj=1847296)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1625k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [LPTP] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to [e-mail]
** so I can fix the driver.
TC classifier action (bugs to [e-mail] cc [e-mail])
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:02' and the driver 'system'
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1118861648.575:0): initialized
Total HugeTLB memory allocated, 0
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([e-mail])
devfs: boot_options: 0x1
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (75 C)
ibm_acpi: ec object not found
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
 Firmware: 4.1
 Sensor: 8
 new absolute packet format
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
io scheduler noop registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9100822A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ASUS SCB-2408, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
pnp: the driver 'ide' has been registered
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 >
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  1476.000 MB/sec
raid5: using function: pIII_sse (1476.000 MB/sec)
raid6: int32x1    761 MB/s
raid6: int32x2   1011 MB/s
raid6: int32x4    640 MB/s
raid6: int32x8    593 MB/s
raid6: mmxx1     1554 MB/s
raid6: mmxx2     2839 MB/s
raid6: sse1x1    1449 MB/s
raid6: sse1x2    2496 MB/s
raid6: using algorithm sse1x2 (2496 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [e-mail]
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: SGTC: 13333
powernow: Minimum speed 864 MHz. Maximum speed 1862 MHz.
PM: Reading swsusp image.
PM: Resume from disk failed.
ACPI wakeup devices: 
PCI0 USB1 USB2 USB3 EHCI  EC0  LID  AC9  MC9 ILAN SLPB 
ACPI: (supports S0 S3 S4 S5)
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 296k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 10, pci mem 0xdffff700
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 11, io base 0xdc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 5, io base 0xe000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 5, io base 0xe400
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sl811: driver sl811-hcd, 15 Dec 2004
usb 2-1: new low speed USB device using uhci_hcd and address 2
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <[e-mail]>
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: Remapped memory spaces reg 0xe088c800
ohci1394: fw-host0: Soft reset finished
ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: 0000000f
ohci1394: fw-host0: 4 iso receive contexts available
ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: 000000ff
ohci1394: fw-host0: 8 iso transmit contexts available
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Receive DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=0 initialized
ohci1394: fw-host0: Transmit DMA ctx=1 initialized
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]
ieee1394: CSR: setting expire to 98, HZ=1000
sbp2: $Rev: 1219 $ Ben Collins <[e-mail]>
input: USB HID v1.00 Keyboard [Cherry GmbH Cherry Slim Line Trackball Keyboard] on usb-0000:00:10.0-1
input: USB HID v1.00 Mouse [Cherry GmbH Cherry Slim Line Trackball Keyboard] on usb-0000:00:10.0-1
ohci1394: fw-host0: IntEvent: 00030010
ohci1394: fw-host0: irq_handler: Bus reset requested
ohci1394: fw-host0: Cancel request received
ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
ohci1394: fw-host0: SelfID packet 0x807f8952 received
ieee1394: Including SelfID 0x52897f80
ohci1394: fw-host0: SelfID for this node is 0x807f8952
ohci1394: fw-host0: SelfID complete
ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
ieee1394: selfid_complete called with successful SelfID stage ... irm_id: 0xFFC0 node_id: 0xFFC0
ieee1394: NodeMgr: Processing host reset for knodemgrd_0
ohci1394: fw-host0: Single packet rcv'd
ohci1394: fw-host0: Got phy packet ctx=0 ... discarded
ieee1394: send packet local: ffc00140 ffc0ffff f0000400
ieee1394: received packet: ffc00140 ffc0ffff f0000400
ieee1394: send packet local: ffc00160 ffc00000 00000000 f0bf0404
ieee1394: received packet: ffc00160 ffc00000 00000000 f0bf0404
ieee1394: send packet local: ffc00540 ffc0ffff f0000404
ieee1394: received packet: ffc00540 ffc0ffff f0000404
ieee1394: send packet local: ffc00560 ffc00000 00000000 34393331
ieee1394: received packet: ffc00560 ffc00000 00000000 34393331
ieee1394: send packet local: ffc00940 ffc0ffff f0000408
ieee1394: received packet: ffc00940 ffc0ffff f0000408
ieee1394: send packet local: ffc00960 ffc00000 00000000 32a264e0
ieee1394: received packet: ffc00960 ffc00000 00000000 32a264e0
ieee1394: send packet local: ffc00d40 ffc0ffff f000040c
ieee1394: received packet: ffc00d40 ffc0ffff f000040c
ieee1394: send packet local: ffc00d60 ffc00000 00000000 430d0300
ieee1394: received packet: ffc00d60 ffc00000 00000000 430d0300
ieee1394: send packet local: ffc01140 ffc0ffff f0000410
ieee1394: received packet: ffc01140 ffc0ffff f0000410
ieee1394: send packet local: ffc01160 ffc00000 00000000 f3111225
ieee1394: received packet: ffc01160 ffc00000 00000000 f3111225
ieee1394: send packet local: ffc01550 ffc0ffff f0000400 04000000
ieee1394: received packet: ffc01550 ffc0ffff f0000400 04000000
ieee1394: send packet local: ffc01570 ffc00000 00000000 04000000
ieee1394: received packet: ffc01570 ffc00000 00000000 04000000
ieee1394: NodeMgr: raw=0xe064a232 irmc=1 cmc=1 isc=1 bmc=0 pmc=0 cyc_clk_acc=100 max_rec=2048 max_rom=1024 gen=3 lspd=2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d43251211f3]
ieee1394: send packet 100: ffff0100 ffc0ffff f0000234 1f0000c0
ohci1394: fw-host0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0, speed=0
ohci1394: fw-host0: Starting transmit DMA ctx=0
ohci1394: fw-host0: IntEvent: 00000001
ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011
ohci1394: fw-host0: Packet sent to node 63 tcode=0x0 tLabel=0x00 ack=0x11 spd=0 data=0x1F0000C0 ctx=0
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 810
ext3_orphan_cleanup: deleting unreferenced inode 1751
ext3_orphan_cleanup: deleting unreferenced inode 1759
ext3_orphan_cleanup: deleting unreferenced inode 1764
ext3_orphan_cleanup: deleting unreferenced inode 1765
ext3_orphan_cleanup: deleting unreferenced inode 1766
ext3_orphan_cleanup: deleting unreferenced inode 1762
ext3_orphan_cleanup: deleting unreferenced inode 1763
ext3_orphan_cleanup: deleting unreferenced inode 811
ext3_orphan_cleanup: deleting unreferenced inode 1165
ext3_orphan_cleanup: deleting unreferenced inode 6312
ext3_orphan_cleanup: deleting unreferenced inode 6313
ext3_orphan_cleanup: deleting unreferenced inode 229715
ext3_orphan_cleanup: deleting unreferenced inode 5220
ext3_orphan_cleanup: deleting unreferenced inode 1971564
ext3_orphan_cleanup: deleting unreferenced inode 982929
ext3_orphan_cleanup: deleting unreferenced inode 982932
ext3_orphan_cleanup: deleting unreferenced inode 344144
ext3_orphan_cleanup: deleting unreferenced inode 344148
ext3_orphan_cleanup: deleting unreferenced inode 344262
ext3_orphan_cleanup: deleting unreferenced inode 1065327
ext3_orphan_cleanup: deleting unreferenced inode 1065387
ext3_orphan_cleanup: deleting unreferenced inode 1125132
ext3_orphan_cleanup: deleting unreferenced inode 1125489
ext3_orphan_cleanup: deleting unreferenced inode 1125313
ext3_orphan_cleanup: deleting unreferenced inode 1070591
ext3_orphan_cleanup: deleting unreferenced inode 595465
EXT3-fs: hda5: 27 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 987956k swap on /dev/hda6.  Priority:-1 extents:1
EXT3 FS on hda5, internal journal
NET: Registered protocol family 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
Linux agpgart interface v0.100 (c) Dave Jones
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Real Time Clock Driver v1.12
NTFS driver 2.1.22 [Flags: R/W DEBUG MODULE].
NTFS volume version 3.1.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda3.
devfs_mk_dev: could not append to parent for vcc/2
devfs_mk_dev: could not append to parent for vcc/a2
devfs_mk_dev: could not append to parent for vcc/3
devfs_mk_dev: could not append to parent for vcc/a3
devfs_mk_dev: could not append to parent for vcc/4
devfs_mk_dev: could not append to parent for vcc/a4
devfs_mk_dev: could not append to parent for vcc/5
devfs_mk_dev: could not append to parent for vcc/a5
devfs_mk_dev: could not append to parent for vcc/6
devfs_mk_dev: could not append to parent for vcc/a6
devfs_mk_dev: could not append to parent for vcc/7
devfs_mk_dev: could not append to parent for vcc/a7
devfs_mk_dev: could not append to parent for vcc/8
devfs_mk_dev: could not append to parent for vcc/a8
devfs_mk_dev: could not append to parent for vcc/9
devfs_mk_dev: could not append to parent for vcc/a9
devfs_mk_dev: could not append to parent for vcc/10
devfs_mk_dev: could not append to parent for vcc/a10
devfs_mk_dev: could not append to parent for vcc/11
devfs_mk_dev: could not append to parent for vcc/a11
ts: Compaq touchscreen protocol output
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acx100: It looks like you've been coaxed into buying a wireless network card
acx100: that uses the mysterious ACX100/ACX111 chip from Texas Instruments.
acx100: You should better have bought e.g. a PRISM(R) chipset based card,
acx100: since that would mean REAL vendor Linux support.
acx100: Given this info, it's evident that this driver is still EXPERIMENTAL,
acx100: thus your mileage may vary. Reading README file and/or Craig's HOWTO is
recommended, visit http://acx100.sf.net in case of further questions/discussion.
acx100: Warning: compiled to use 16bit I/O access only (compatibility mode). Set Makefile ACX_IO_WIDTH=32 to use slightly problematic 32bit mode
Running on a little-endian CPU
acx_init_module: dev_info is: TI acx_pci
acx_init_module: TI acx_pci.o: Ver 0.2.0pre8 driver initialized, waiting for cards to probe...
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
Found ACX100-based wireless network card at 0000:00:0a.0, irq:5, phymem1:0xdfffe000, phymem2:0xdffe0000, mem1:0xe0a7a000, mem1_size:4096, mem2:0xe0aa0000, mem2_size:65536
initial debug setting is 0x001b
acx_select_io_register_set: using ACX100 io resource addresses (size: 56)
hw_unavailable = 1
acx_probe_pci: TI acx_pci: Using IRQ 5
reset hw_unavailable++
acx_reset_mac: enable soft reset...
acx_reset_mac: disable soft reset and go to init mode...
Requesting firmware image 'WLANGEN.BIN'
not using auto increment for firmware loading
acx_write_fw: firmware written
acx_write_fw (firmware): 0, acx_validate_fw: 0
acx_reset_dev: boot up eCPU and wait for complete...
acx_reset_dev: Received signal that card is ready to be configured :) (the eCPU has woken up)
reset hw_unavailable--
acx100: allocated net device wlan0, driver compiled against wireless extensions v17 and Linux 2.6.11-gentoo-r10
******************************************
************* acx_init_mac_1 *************
******************************************
==> Get the mailbox pointers from the scratch pad registers
CmdMailboxOffset = fdc8
InfoMailboxOffset = ff4c
<== Get the mailbox pointers from the scratch pad registers
CommandParameters = [ 0xe0aafdcc ]
InfoParameters = [ 0xe0aaff50 ]
Requesting firmware image 'RADIO11.BIN'
not using auto increment for firmware loading
acx_write_fw: firmware written
acx_write_fw (radio): 0, acx_validate_fw: 0
CodeEnd:A26C
acx100_init_wep: writing WEP options.
get_mask 0x00004d82, set_mask 0x00000000
Got sensitivity value 187
Got antenna value 0x8F
Got Energy Detect (ED) threshold 112
Got Channel Clear Assessment (CCA) value 13
Got regulatory domain 0x30
get_mask 0x00000000, set_mask 0x00000000 - after update
new ratevector: 82 84 0b 16 2c
setting RXconfig to 2000:0000
Beacon length:59
hw_unavailable--
acx100: form factor 0x00 (unspecified), radio type 0x11 (RFMD), EEPROM version 0x04. Uploaded firmware 'Rev 1.9.8.b' (0x01020505).
creating /proc entry driver/acx_wlan0
creating /proc entry driver/acx_wlan0_diag
creating /proc entry driver/acx_wlan0_eeprom
creating /proc entry driver/acx_wlan0_phy
acx_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 loaded successfully
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:00:0b.0 [1584:3000]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0088, PCI irq 5
Socket status: 30000007
irda_init()
NET: Registered protocol family 23
snd_mpu401_uart: disagrees about version of symbol snd_rawmidi_receive
snd_mpu401_uart: Unknown symbol snd_rawmidi_receive
snd_mpu401_uart: disagrees about version of symbol snd_rawmidi_transmit_ack
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_ack
snd_mpu401_uart: disagrees about version of symbol snd_rawmidi_transmit_peek
snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_peek
snd_mpu401_uart: disagrees about version of symbol snd_rawmidi_new
snd_mpu401_uart: Unknown symbol snd_rawmidi_new
snd_mpu401_uart: disagrees about version of symbol snd_rawmidi_set_ops
snd_mpu401_uart: Unknown symbol snd_rawmidi_set_ops
snd_mpu401_uart: disagrees about version of symbol snd_device_free
snd_mpu401_uart: Unknown symbol snd_device_free
snd_ac97_codec: disagrees about version of symbol snd_info_register
snd_ac97_codec: Unknown symbol snd_info_register
snd_ac97_codec: disagrees about version of symbol snd_ctl_add
snd_ac97_codec: Unknown symbol snd_ctl_add
snd_ac97_codec: disagrees about version of symbol snd_info_free_entry
snd_ac97_codec: Unknown symbol snd_info_free_entry
snd_ac97_codec: disagrees about version of symbol snd_ctl_find_id
snd_ac97_codec: Unknown symbol snd_ctl_find_id
snd_ac97_codec: disagrees about version of symbol snd_ctl_new1
snd_ac97_codec: Unknown symbol snd_ctl_new1
snd_ac97_codec: disagrees about version of symbol snd_ctl_remove_id
snd_ac97_codec: Unknown symbol snd_ctl_remove_id
snd_ac97_codec: disagrees about version of symbol snd_component_add
snd_ac97_codec: Unknown symbol snd_component_add
snd_ac97_codec: disagrees about version of symbol snd_pcm_hw_rule_add
snd_ac97_codec: Unknown symbol snd_pcm_hw_rule_add
snd_ac97_codec: disagrees about version of symbol snd_device_new
snd_ac97_codec: Unknown symbol snd_device_new
snd_ac97_codec: disagrees about version of symbol snd_info_create_card_entry
snd_ac97_codec: Unknown symbol snd_info_create_card_entry
snd_ac97_codec: disagrees about version of symbol snd_info_unregister
snd_ac97_codec: Unknown symbol snd_info_unregister
snd_via82xx: disagrees about version of symbol snd_ctl_add
snd_via82xx: Unknown symbol snd_ctl_add
snd_via82xx: Unknown symbol snd_ac97_resume
snd_via82xx: disagrees about version of symbol snd_pcm_new
snd_via82xx: Unknown symbol snd_pcm_new
snd_via82xx: disagrees about version of symbol snd_pcm_limit_hw_rates
snd_via82xx: Unknown symbol snd_pcm_limit_hw_rates
snd_via82xx: disagrees about version of symbol snd_card_register
snd_via82xx: Unknown symbol snd_card_register
snd_via82xx: disagrees about version of symbol snd_card_free
snd_via82xx: Unknown symbol snd_card_free
snd_via82xx: disagrees about version of symbol snd_pcm_lib_preallocate_pages_for_all
snd_via82xx: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
snd_via82xx: disagrees about version of symbol snd_card_proc_new
snd_via82xx: Unknown symbol snd_card_proc_new
snd_via82xx: Unknown symbol snd_ac97_set_rate
snd_via82xx: Unknown symbol snd_ac97_update_bits
snd_via82xx: Unknown symbol snd_ac97_mixer
snd_via82xx: Unknown symbol snd_ac97_bus
snd_via82xx: disagrees about version of symbol snd_ctl_find_id
snd_via82xx: Unknown symbol snd_ctl_find_id
snd_via82xx: disagrees about version of symbol snd_ctl_new1
snd_via82xx: Unknown symbol snd_ctl_new1
snd_via82xx: disagrees about version of symbol snd_card_new
snd_via82xx: Unknown symbol snd_card_new
snd_via82xx: Unknown symbol snd_ac97_suspend
snd_via82xx: disagrees about version of symbol snd_pcm_lib_malloc_pages
snd_via82xx: Unknown symbol snd_pcm_lib_malloc_pages
snd_via82xx: disagrees about version of symbol snd_pcm_lib_ioctl
snd_via82xx: Unknown symbol snd_pcm_lib_ioctl
snd_via82xx: disagrees about version of symbol snd_pcm_lib_free_pages
snd_via82xx: Unknown symbol snd_pcm_lib_free_pages
snd_via82xx: disagrees about version of symbol snd_card_pci_suspend
snd_via82xx: Unknown symbol snd_card_pci_suspend
snd_via82xx: disagrees about version of symbol snd_pcm_set_ops
snd_via82xx: Unknown symbol snd_pcm_set_ops
snd_via82xx: disagrees about version of symbol snd_card_set_pm_callback
snd_via82xx: Unknown symbol snd_card_set_pm_callback
snd_via82xx: disagrees about version of symbol snd_pcm_hw_constraint_list
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_list
snd_via82xx: disagrees about version of symbol snd_device_new
snd_via82xx: Unknown symbol snd_device_new
snd_via82xx: disagrees about version of symbol snd_pcm_sgbuf_ops_page
snd_via82xx: Unknown symbol snd_pcm_sgbuf_ops_page
snd_via82xx: Unknown symbol snd_mpu401_uart_interrupt
snd_via82xx: Unknown symbol snd_ac97_get_short_name
snd_via82xx: disagrees about version of symbol snd_pcm_suspend_all
snd_via82xx: Unknown symbol snd_pcm_suspend_all
snd_via82xx: disagrees about version of symbol snd_pcm_hw_constraint_integer
snd_via82xx: Unknown symbol snd_pcm_hw_constraint_integer
snd_via82xx: Unknown symbol snd_mpu401_uart_new
snd_via82xx: disagrees about version of symbol snd_pcm_period_elapsed
snd_via82xx: Unknown symbol snd_pcm_period_elapsed
snd_via82xx: Unknown symbol snd_ac97_tune_hardware
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xdffff600, 00:03:0d:02:48:56, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:00' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
input: PC Speaker
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
devfs_mk_dev: could not append to parent for vcc/3
devfs_mk_dev: could not append to parent for vcc/a3
devfs_mk_dev: could not append to parent for vcc/4
devfs_mk_dev: could not append to parent for vcc/a4
devfs_mk_dev: could not append to parent for vcc/5
devfs_mk_dev: could not append to parent for vcc/a5
devfs_mk_dev: could not append to parent for vcc/6
devfs_mk_dev: could not append to parent for vcc/a6
SysRq : HELP : loglevel0-8 reBoot tErm kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount