build log

build.log (text/x-log), 45.67 KB, created by Tuomas Salonen on 2019-07-21 16:32:49 UTC

[32;01m * [39;49;00mPackage:    media-gfx/freecad-0.18.3
[32;01m * [39;49;00mRepository: waebbl
[32;01m * [39;49;00mMaintainer: [e-mail]
[32;01m * [39;49;00mUpstream:   https://www.freecadweb.org/tracker/
[32;01m * [39;49;00mUSE:        abi_x86_64 addonmgr amd64 arch complete drawing elibc_glibc fem idf image inspection kernel_linux material mesh openscad part_design path points python_targets_python3_6 raytracing reverseengineering robot ship show spreadsheet surface techdraw tux userland_GNU
[32;01m * [39;49;00mFEATURES:   network-sandbox preserve-libs sandbox userpriv usersandbox
 [32;01m*[0m Checking for at least 6 GiB disk space at "/tmp/portage/media-gfx/freecad-0.18.3/temp" ...
[A[181C [34;01m[ [32;01mok[34;01m ][0m
>>> Unpacking source...
>>> Unpacking freecad-0.18.3.tar.gz to /tmp/portage/media-gfx/freecad-0.18.3/work
>>> Source unpacked in /tmp/portage/media-gfx/freecad-0.18.3/work
>>> Preparing source in /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3 ...
 [32;01m*[0m Applying freecad-9999-find-Coin.tag.patch ...
[A[181C [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Hardcoded definition(s) removed in CMakeLists.txt:
 [32;01m*[0m      SET(CMAKE_INSTALL_PREFIX ${CMAKE_BINARY_DIR}/install CACHE PATH "Installa
 [32;01m*[0m      SET(CMAKE_INSTALL_PREFIX "/usr/lib${LIB_SUFFIX}/freecad" CACHE PATH "Inst
>>> Source prepared.
>>> Configuring source in /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3 ...
>>> Working in BUILD_DIR: "/tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build"
cmake -C /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/gentoo_common_config.cmake -G Ninja -DCMAKE_INSTALL_PREFIX=/usr -DBUILD_ADDONMGR=yes -DBUILD_ARCH=yes -DBUILD_ASSEMBLY=no -DBUILD_COMPLETE=yes -DBUILD_DRAFT=ON -DBUILD_DRAWING=yes -DBUILD_FEM=yes -DBUILD_FEM_NETGEN=no -DBUILD_FLAT_MESH=yes -DBUILD_FREETYPE=ON -DBUILD_GUI=ON -DBUILD_IDF=yes -DBUILD_IMAGE=yes -DBUILD_IMPORT=ON -DBUILD_INSPECTION=yes -DBUILD_JTREADER=OFF -DBUILD_MATERIAL=yes -DBUILD_MESH=yes -DBUILD_MESH_PART=yes -DBUILD_OPENSCAD=yes -DBUILD_PART=ON -DBUILD_PART_DESIGN=yes -DBUILD_PATH=yes -DBUILD_PLOT=ON -DBUILD_POINTS=yes -DBUILD_QT5=ON -DBUILD_RAYTRACING=yes -DBUILD_REVERSEENGINEERING=yes -DBUILD_ROBOT=yes -DBUILD_SHIP=yes -DBUILD_SHOW=yes -DBUILD_SKETCHER=ON -DBUILD_SMESH=yes -DBUILD_SPREADSHEET=yes -DBUILD_START=ON -DBUILD_SURFACE=yes -DBUILD_TECHDRAW=yes -DBUILD_TUX=yes -DBUILD_VR=OFF -DBUILD_WEB=ON -DCMAKE_INSTALL_DATADIR=/usr/share/freecad/data -DCMAKE_INSTALL_DOCDIR=/usr/share/doc/freecad-0.18.3 -DCMAKE_INSTALL_INCLUDEDIR=/usr/include/freecad -DCMAKE_INSTALL_PREFIX=/usr/lib64/freecad -DFREECAD_USE_EXTERNAL_SMESH=OFF -DFREECAD_USE_EXTERNAL_KDL=ON -DFREECAD_USE_EXTERNAL_ZIPIOS=OFF -DFREECAD_USE_FREETYPE=ON -DFREECAD_USE_PCL=no -DFREECAD_USE_PYBIND11=yes -DOCC_INCLUDE_DIR=/usr/lib64/opencascade-7.3.0/include/opencascade -DOCC_LIBRARY_DIR=/usr/lib64/opencascade-7.3.0/lib64 -DOCCT_CMAKE_FALLBACK=ON -DBUILD_SANDBOX=OFF -DBUILD_TEMPLATE=OFF -DBUILD_TEST=OFF -DCMAKE_BUILD_TYPE=Release -DCMAKE_TOOLCHAIN_FILE=/tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/gentoo_toolchain.cmake  /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3
loading initial cache file /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/gentoo_common_config.cmake
CMake Warning (dev) at gentoo_common_config.cmake:8 (SET):
  implicitly converting 'BOOLEAN' to 'STRING' type.
This warning is for project developers.  Use -Wno-dev to suppress it.

-- The C compiler identification is GNU 8.3.0
-- The CXX compiler identification is GNU 8.3.0
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Compiler: GNU, version: 8.3.0
-- Looking for GL/gl.h
-- Looking for GL/gl.h - found
-- Looking for C++ include istream
-- Looking for C++ include istream - found
-- Looking for C++ include ostream
-- Looking for C++ include ostream - found
-- Looking for C++ include fstream
-- Looking for C++ include fstream - found
-- Looking for C++ include sstream
-- Looking for C++ include sstream - found
-- Looking for C++ include ios
-- Looking for C++ include ios - found
-- Looking for C++ include iostream
-- Looking for C++ include iostream - found
-- Looking for C++ include iomanip
-- Looking for C++ include iomanip - found
-- Looking for C++ include iostream
-- Looking for C++ include iostream - found
-- Check for STD namespace
-- Check for STD namespace - found
-- prefix: /usr/lib64/freecad
-- datadir: /usr/share/freecad/data
-- docdir: /usr/share/doc/freecad-0.18.3
-- includedir: /usr/include/freecad
-- libdir: /usr/lib64/freecad/lib64
-- cmake: 3.14.3
-- Found PythonInterp: /tmp/portage/media-gfx/freecad-0.18.3/temp/python3.6/bin/python (found version "3.6.5") 
-- Found PythonLibs: /usr/lib64/libpython3.6m.so (found suitable exact version "3.6.5") 
-- Found PythonLibs: /usr/lib64/libpython3.6m.so
-- Performing Test HAS_CPP14_FLAG
-- Performing Test HAS_CPP14_FLAG - Success
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE  
-- Boost version: 1.65.0
-- Found the following Boost libraries:
--   filesystem
--   program_options
--   regex
--   system
--   thread
--   chrono
--   date_time
--   atomic
-- Found Xerces-C: /usr/lib64/libxerces-c.so
-- Found ZLIB: /usr/lib64/libz.so (found version "1.2.11") 
-- PyCXX found:
--   Headers:  /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src
--   Sources:  /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/CXX
--   Version:  6.2.8
-- Found OCC: /usr/lib64/opencascade-7.3.0/include/opencascade (found version "7.3.0") 
-- -- Found OCE/OpenCASCADE version: 7.3.0
-- -- OCE/OpenCASCADE include directory: /usr/lib64/opencascade-7.3.0/include/opencascade
-- -- OCE/OpenCASCADE shared libraries directory: /usr/lib64/opencascade-7.3.0/lib64
-- VTK components: vtkCommonCore;vtkCommonDataModel;vtkFiltersVerdict;vtkIOXML;vtkFiltersCore;vtkFiltersGeneral;vtkIOLegacy;vtkFiltersExtraction;vtkFiltersSources;vtkFiltersGeometry;vtkhdf5;vtkRenderingCore;vtkInteractionStyle;vtkRenderingFreeType;vtkRenderingOpenGL2
-- Check for medfile (libmed and libmedc) ...
-- Found MEDFile: /usr/include  
-- Found PkgConfig: x86_64-pc-linux-gnu-pkg-config (found version "0.29.2") 
-- We guess that libmed was built using hdf5-openmpi version
-- Checking for one of the modules 'hdf5-openmpi'
-- HDF5: Using hdf5 compiler wrapper to determine C configuration
-- Found HDF5: /usr/lib64/libhdf5.so;/usr/lib64/libsz.so;/usr/lib64/libz.so;/usr/lib64/libdl.so;/usr/lib64/libm.so (found version "1.10.5")  
-- Checking for one of the modules 'ompi-cxx'
CMake Warning at CMakeLists.txt:745 (message):
  mpi.h was not found.  Check for error above.


-- Found SWIG: /usr/bin/swig (found version "3.0.12") 
-- Found Eigen3: /usr/include/eigen3 (Required is at least version "2.91.0") 
-- Found Freetype: /usr/lib64/libfreetype.so (found version "2.9.1") 
-- Found OpenGL: /usr/lib64/libGL.so   
-- Found OpenGLU: /usr/lib64/libGLU.so
-- Found Coin3D: /usr/lib64/libCoin.so  
-- Found Spnav: /usr/lib64/libspnav.so  
-- Shiboken2Config: Using default python: .cpython-36m-x86_64-linux-gnu
-- libshiboken built for Release
-- PYTHON_CONFIG_SUFFIX: .cpython-36m-x86_64-linux-gnu
-- libshiboken built for Release
-- -- matplotlib-2.2.2 has been found.
-- Platform is 64-bit, set -D_OCC64
-- Build type: Release
fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
/bin/sh: bzr: command not found
svn: E155007: '/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3' is not a working copy
Unknown version control
/tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Build/Version.h.out written
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/BaseClassPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/BoundBoxPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/CoordinateSystemPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/PersistencePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/VectorPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/MatrixPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/RotationPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/PlacementPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/AxisPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/UnitPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Base/QuantityPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/DocumentPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/DocumentObjectPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/ExtensionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/ExtensionContainerPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/DocumentObjectExtensionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/GroupExtensionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/DocumentObjectGroupPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/GeoFeaturePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/GeoFeatureGroupExtensionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/OriginGroupExtensionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/PartPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/ComplexGeoDataPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/PropertyContainerPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/App/MaterialPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Points/App/PointsPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Mesh/App/FacetPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Mesh/App/MeshFeaturePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Mesh/App/MeshPointPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Mesh/App/MeshPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Mesh/Gui/ViewProviderMeshPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ArcPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ArcOfConicPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ArcOfCirclePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ArcOfParabolaPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/BodyBasePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ConicPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/CirclePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ArcOfEllipsePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/EllipsePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/HyperbolaPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ArcOfHyperbolaPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ParabolaPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/OffsetCurvePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/GeometryPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/GeometryCurvePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/BoundedCurvePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TrimmedCurvePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/GeometrySurfacePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/LinePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/LineSegmentPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/PointPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/BezierCurvePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/BSplineCurvePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/PlanePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ConePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/CylinderPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/SpherePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/ToroidPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/BezierSurfacePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/BSplineSurfacePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/OffsetSurfacePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/PlateSurfacePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/RectangularTrimmedSurfacePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/SurfaceOfExtrusionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/SurfaceOfRevolutionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/PartFeaturePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/AttachExtensionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Part2DObjectPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/AttachEnginePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeCompoundPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeCompSolidPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeEdgePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeFacePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeShellPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeSolidPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeVertexPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/TopoShapeWirePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/BRepOffsetAPI_MakePipeShellPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/ArcOfCircle2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/ArcOfConic2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/ArcOfEllipse2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/ArcOfHyperbola2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/ArcOfParabola2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/BezierCurve2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/BSplineCurve2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Circle2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Conic2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Ellipse2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Geometry2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Hyperbola2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Curve2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Line2dSegmentPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Line2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/OffsetCurve2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Part/App/Geom2d/Parabola2dPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/PartDesign/App/BodyPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/PartDesign/App/FeaturePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/PartDesign/Gui/ViewProviderPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Sketcher/App/SketchObjectSFPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Sketcher/App/SketchObjectPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Sketcher/App/ConstraintPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Sketcher/App/SketchPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Robot/App/Robot6AxisPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Robot/App/TrajectoryPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Robot/App/WaypointPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Robot/App/RobotObjectPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Import/App/StepShapePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Fem/App/FemMeshPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Fem/App/FemPostPipelinePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Fem/Gui/ViewProviderFemMeshPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Spreadsheet/App/SheetPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Spreadsheet/App/PropertySheetPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Spreadsheet/App/PropertyColumnWidthsPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Spreadsheet/App/PropertyRowHeightsPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/App/CommandPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/App/PathPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/App/ToolPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/App/TooltablePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/App/FeaturePathCompoundPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/App/AreaPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/App/FeatureAreaPy.cpp
-- area module (for Path Workbench) will be installed to: /usr/lib64/freecad/lib64
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Path/PathSimulator/App/PathSimPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/Measure/App/MeasurementPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawPagePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawViewPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawViewPartPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawViewSymbolPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawTemplatePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawParametricTemplatePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawSVGTemplatePy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawViewClipPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawViewDimensionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawHatchPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawGeomHatchPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawViewCollectionPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawProjGroupPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawProjGroupItemPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Mod/TechDraw/App/DrawViewAnnotationPy.cpp
Created file /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/doc/freecad.qch
-- Could NOT find Doxygen (missing: DOXYGEN_EXECUTABLE) 
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Gui/DocumentPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Gui/PythonWorkbenchPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Gui/ViewProviderPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Gui/ViewProviderDocumentObjectPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Gui/WorkbenchPy.cpp
-- /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build/src/Gui/SelectionObjectPy.cpp
-- <<< Gentoo configuration >>>
Build type      Release
Install path    /usr/lib64/freecad
Compiler flags:
C               -march=native -O2 -pipe
C++             -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64
Linker flags:
Executable      -Wl,-O1 -Wl,--as-needed
Module          -Wl,-O1 -Wl,--as-needed
Shared          -Wl,-O1 -Wl,--as-needed -Wl,--no-undefined

-- Configuring done
-- Generating done
-- Build files have been written to: /tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build
>>> Source configured.
>>> Compiling source in /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3 ...
>>> Working in BUILD_DIR: "/tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build"
ninja -v -j5 -l0
[1/3289] /usr/bin/x86_64-pc-linux-gnu-g++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DMEFISTO2_EXPORTS -DOCC_CONVERT_SIGNALS -D_OCC64 -I. -Isrc -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMDS -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Driver -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverUNV -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverDAT -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverSTL -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/StdMeshers -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/inc -Isrc/3rdParty/salomesmesh -I/usr/lib64/opencascade-7.3.0/include/opencascade -I/usr/include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/freetype2  -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -fPIC   -DMEFISTO2D_EXPORTS -pthread -MD -MT src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o -MF src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o.d -o src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o -c /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/MEFISTO2/aptrte.cpp
[2/3289] /usr/bin/x86_64-pc-linux-gnu-g++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DSMESH_EXPORTS -D_OCC64 -I. -Isrc -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMDS -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Driver -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverUNV -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverDAT -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverSTL -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/StdMeshers -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/inc -Isrc/3rdParty/salomesmesh -I/usr/lib64/opencascade-7.3.0/include/opencascade -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/freetype2 -isystem /usr/include/vtk-8.2  -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -fPIC   -pthread -std=gnu++11 -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF.cpp.o -MF src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF.cpp.o.d -o src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF.cpp.o -c /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMESH/DriverGMF.cpp
[3/3289] /usr/bin/x86_64-pc-linux-gnu-gcc -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DMEFISTO2_EXPORTS -DOCC_CONVERT_SIGNALS -D_OCC64 -I. -Isrc -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMDS -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Driver -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverUNV -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverDAT -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverSTL -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/StdMeshers -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/inc -Isrc/3rdParty/salomesmesh -I/usr/lib64/opencascade-7.3.0/include/opencascade -I/usr/include/vtk-8.2 -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/freetype2  -march=native -O2 -pipe -fPIC   -DMEFISTO2D_EXPORTS -pthread -MD -MT src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o -MF src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o.d -o src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o -c /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/MEFISTO2/trte.c
[4/3289] : && /usr/bin/x86_64-pc-linux-gnu-g++ -fPIC -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter  -Wl,-O1 -Wl,--as-needed -Wl,--no-undefined -shared -Wl,-soname,libMEFISTO2.so -o lib/libMEFISTO2.so src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o -L/usr/lib64/opencascade-7.3.0/lib64 -Wl,-rpath,/usr/lib64/opencascade-7.3.0/lib64: -lmpi_cxx -lmpi -lTKFillet -lTKMesh -lTKernel -lTKG2d -lTKG3d -lTKMath -lTKIGES -lTKSTL -lTKShHealing -lTKXSBase -lTKBin -lTKBool -lTKBO -lTKCDF -lTKBRep -lTKTopAlgo -lTKGeomAlgo -lTKGeomBase -lTKOffset -lTKPrim -lTKSTEP -lTKSTEPBase -lTKSTEPAttr -lTKHLR -lTKFeat -lTKCAF -lTKXCAF -lTKLCAF -lTKXDESTEP -lTKXDEIGES -lTKMeshVS && :
FAILED: lib/libMEFISTO2.so 
: && /usr/bin/x86_64-pc-linux-gnu-g++ -fPIC -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter  -Wl,-O1 -Wl,--as-needed -Wl,--no-undefined -shared -Wl,-soname,libMEFISTO2.so -o lib/libMEFISTO2.so src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/aptrte.cpp.o src/3rdParty/salomesmesh/CMakeFiles/MEFISTO2.dir/src/MEFISTO2/trte.c.o -L/usr/lib64/opencascade-7.3.0/lib64 -Wl,-rpath,/usr/lib64/opencascade-7.3.0/lib64: -lmpi_cxx -lmpi -lTKFillet -lTKMesh -lTKernel -lTKG2d -lTKG3d -lTKMath -lTKIGES -lTKSTL -lTKShHealing -lTKXSBase -lTKBin -lTKBool -lTKBO -lTKCDF -lTKBRep -lTKTopAlgo -lTKGeomAlgo -lTKGeomBase -lTKOffset -lTKPrim -lTKSTEP -lTKSTEPBase -lTKSTEPAttr -lTKHLR -lTKFeat -lTKCAF -lTKXCAF -lTKLCAF -lTKXDESTEP -lTKXDEIGES -lTKMeshVS && :
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKFillet
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKMesh
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKernel
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKG2d
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKG3d
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKMath
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKIGES
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKSTL
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKShHealing
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKXSBase
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKBin
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKBool
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKBO
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKCDF
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKBRep
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKTopAlgo
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKGeomAlgo
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKGeomBase
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKOffset
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKPrim
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKSTEP
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKSTEPBase
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKSTEPAttr
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKHLR
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKFeat
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKCAF
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKXCAF
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKLCAF
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKXDESTEP
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKXDEIGES
/usr/lib/gcc/x86_64-pc-linux-gnu/8.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lTKMeshVS
collect2: error: ld returned 1 exit status
[5/3289] /usr/bin/x86_64-pc-linux-gnu-g++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DSMESH_EXPORTS -D_OCC64 -I. -Isrc -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMDS -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Driver -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverUNV -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverDAT -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverSTL -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/StdMeshers -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/inc -Isrc/3rdParty/salomesmesh -I/usr/lib64/opencascade-7.3.0/include/opencascade -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/freetype2 -isystem /usr/include/vtk-8.2  -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -fPIC   -pthread -std=gnu++11 -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Read.cpp.o -MF src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Read.cpp.o.d -o src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Read.cpp.o -c /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMESH/DriverGMF_Read.cpp
[6/3289] /usr/bin/x86_64-pc-linux-gnu-g++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DSMESH_EXPORTS -D_OCC64 -I. -Isrc -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMDS -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Driver -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverUNV -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverDAT -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverSTL -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/StdMeshers -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/inc -Isrc/3rdParty/salomesmesh -I/usr/lib64/opencascade-7.3.0/include/opencascade -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/freetype2 -isystem /usr/include/vtk-8.2  -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -fPIC   -pthread -std=gnu++11 -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Write.cpp.o -MF src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Write.cpp.o.d -o src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverGMF_Write.cpp.o -c /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMESH/DriverGMF_Write.cpp
[7/3289] /usr/bin/x86_64-pc-linux-gnu-g++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DSMESH_EXPORTS -D_OCC64 -I. -Isrc -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMDS -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Driver -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverUNV -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverDAT -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverSTL -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/StdMeshers -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/inc -Isrc/3rdParty/salomesmesh -I/usr/lib64/opencascade-7.3.0/include/opencascade -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/freetype2 -isystem /usr/include/vtk-8.2  -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -fPIC   -pthread -std=gnu++11 -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o -MF src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o.d -o src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/SMESH/DriverMED_Family.cpp.o -c /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMESH/DriverMED_Family.cpp
[8/3289] /usr/bin/x86_64-pc-linux-gnu-g++ -DCSFDB -DHAVE_CONFIG_H -DHAVE_LIMITS_H -DLIN -DOCC_CONVERT_SIGNALS -DSMESH_EXPORTS -D_OCC64 -I. -Isrc -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/SMDS -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Driver -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverUNV -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverDAT -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/DriverSTL -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/StdMeshers -I/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/inc -Isrc/3rdParty/salomesmesh -I/usr/lib64/opencascade-7.3.0/include/opencascade -I/usr/include/double-conversion -I/usr/include/eigen3 -I/usr/include/freetype2 -isystem /usr/include/vtk-8.2  -Wall -Wextra -Wno-write-strings -march=native -O2 -pipe -std=c++11 -D_OCC64 -Wno-sign-compare -Wno-reorder -Wno-switch -Wno-unused-variable -Wno-unused-but-set-variable -Wno-comment -Wno-unused-parameter -fPIC   -pthread -std=gnu++11 -MD -MT src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/Controls/SMESH_Controls.cpp.o -MF src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/Controls/SMESH_Controls.cpp.o.d -o src/3rdParty/salomesmesh/CMakeFiles/SMESH.dir/src/Controls/SMESH_Controls.cpp.o -c /tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp: In member function ‘virtual double SMESH::Controls::MultiConnection2D::GetValue(long int)’:
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1964:76: warning: ‘aNode0’ may be used uninitialized in this function [-Wmaybe-uninitialized]
         SMDS_ElemIteratorPtr anElemIter = aNode->GetInverseElementIterator();
                                                                            ^
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp: In member function ‘void SMESH::Controls::Length2D::GetValues(SMESH::Controls::Length2D::TValues&)’:
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1886:49: warning: ‘aNodeId[1]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
       Value aValue(aLength,aNodeId[0],aNodeId[1]);
                                                 ^
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1886:49: warning: ‘aNodeId[0]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1850:50: warning: ‘aNodeId[2]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
       Value aValue1(aLength,aNodeId[1],aNodeId[2]);
                                                  ^
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1850:50: warning: ‘aNodeId[1]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1851:50: warning: ‘aNodeId[0]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
       Value aValue2(aLength,aNodeId[2],aNodeId[0]);
                                                  ^
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:1849:15: warning: ‘aLength’ may be used uninitialized in this function [-Wmaybe-uninitialized]
       aLength += P[2].Distance(P[0]);
       ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp: In member function ‘void SMESH::Controls::FreeEdges::GetBoreders(SMESH::Controls::FreeEdges::TBorders&)’:
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:2512:50: warning: ‘aNodeId[0]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     Border aBorder(anElemId,aNodeId[0],aNodeId[1]);
                                                  ^
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:2512:50: warning: ‘aNodeId[1]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp: In member function ‘void SMESH::Controls::MultiConnection2D::GetValues(SMESH::Controls::MultiConnection2D::MValues&)’:
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:2057:39: warning: ‘aNodeId[0]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     Value aValue(aNodeId[0],aNodeId[2]);
                                       ^
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:2043:41: warning: ‘aNodeId[1]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
       Value aValue(aNodeId[1],aNodeId[2]);
                                         ^
/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3/src/3rdParty/salomesmesh/src/Controls/SMESH_Controls.cpp:2057:39: warning: ‘aNodeId[2]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     Value aValue(aNodeId[0],aNodeId[2]);
                                       ^
ninja: build stopped: subcommand failed.
 [31;01m*[0m ERROR: media-gfx/freecad-0.18.3::waebbl failed (compile phase):
 [31;01m*[0m   ninja -v -j5 -l0 failed
 [31;01m*[0m 
 [31;01m*[0m Call stack:
 [31;01m*[0m     ebuild.sh, line  124:  Called src_compile
 [31;01m*[0m   environment, line 3759:  Called cmake-utils_src_compile
 [31;01m*[0m   environment, line 1286:  Called cmake-utils_src_make
 [31;01m*[0m   environment, line 1467:  Called _cmake_ninja_src_make
 [31;01m*[0m   environment, line  618:  Called eninja
 [31;01m*[0m   environment, line 1787:  Called die
 [31;01m*[0m The specific snippet of code:
 [31;01m*[0m       "$@" || die "${nonfatal_args[@]}" "${*} failed"
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the output of `emerge --info '=media-gfx/freecad-0.18.3::waebbl'`,
 [31;01m*[0m the complete build log and the output of `emerge -pqv '=media-gfx/freecad-0.18.3::waebbl'`.
 [31;01m*[0m The complete build log is located at '/tmp/portage/media-gfx/freecad-0.18.3/temp/build.log'.
 [31;01m*[0m The ebuild environment file is located at '/tmp/portage/media-gfx/freecad-0.18.3/temp/environment'.
 [31;01m*[0m Working directory: '/tmp/portage/media-gfx/freecad-0.18.3/work/freecad-0.18.3_build'
 [31;01m*[0m S: '/tmp/portage/media-gfx/freecad-0.18.3/work/FreeCAD-0.18.3'