dmesg

dmesg (text/plain), 13.00 KB, created by Garrison on 2005-01-19 10:17:59 UTC

Linux version 2.6.9-gentoo-r13 (root@tungsten) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 Wed Jan 12 12:15:26 EST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f56c0
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 6:8 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 1
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Campfires ro root=304 acpi=off video=vesafb:ywrap,mtrr,1024x768-16@75,vram:128 splash=silent,theme:campfires
fbsplash: silent
fbsplash: theme campfires
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1792.457 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized
Speakup:  loading module "speakup_n"
request_module: runaway loop modprobe speakup_n
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513732k/524224k available (3377k kernel code, 9952k reserved, 1051k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3530.75 BogoMIPS (lpj=1765376)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps:        0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 147k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb9d0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
spurious 8259A interrupt: IRQ7.
Machine check exception polling timer started.
gx-suspmod: error: no MediaGX/Geode processor found!
speedstep-smi: No Intel CPU detected.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
devfs: 2004-01-31 Richard Gooch ([e-mail])
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 [e-mail]).
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
inotify init: minor=63
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
vesafb: ATI Technologies Inc., V280, 01.00 (OEM: ATI RADEON 9200)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:577d
vesafb: pmi: set display start = c00c5811, set palette = c00c585d
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=65536
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'campfires'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, size 131072k
fb0: VESA VGA frame buffer device
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Found IRQ 11 for device 0000:00:12.0
PCI: Sharing IRQ 11 with 0000:00:10.0
eth0: VIA Rhine II at 0xe800, 00:0e:a6:56:4b:44, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: OEM200-72A 200GB 7200RPM, ATA DISK drive
hdb: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST330630A, ATA DISK drive
hdd: ST380021A, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: max request size: 128KiB
hdc: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=59303/16/63, UDMA(66)
hdc: cache flushes not supported
 /dev/ide/host0/bus1/target0/lun0: p1
hdd: max request size: 128KiB
hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdd: cache flushes not supported
 /dev/ide/host0/bus1/target1/lun0: p1
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
st: Version 20040403, fixed bufsize 32768, s/g segs 256
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
PCI: Found IRQ 5 for device 0000:00:11.5
PCI: Sharing IRQ 5 with 0000:00:10.2
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
ALSA device list:
  #0: VIA 8235 at 0xe000, irq 5
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 681 not supported
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 204k freed
Adding 987988k swap on /dev/hda3.  Priority:-1 extents:1
EXT3 FS on hda4, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Found IRQ 3 for device 0000:00:10.3
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 3, pci mem e8af2000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KM400/KM400A chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 8.8.25 [Jan 14 2005] on minor 0
ReiserFS: hdd1: found reiserfs format "3.6" with standard journal
usb 1-3: new high speed USB device using address 2
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
fbsplash: switching to verbose mode
ReiserFS: hdd1: using ordered data mode
ReiserFS: hdd1: journal params: device hdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdd1: checking transaction log (hdd1)
ReiserFS: hdd1: Using r5 hash to sort names
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] AGP detected, AgpState   = 0x1f000a0b (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 116387840
[fglrx] max   LFB = 116387840
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 104849408
[fglrx] max   LFB = 104849408
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384
mtrr: no MTRR for d0c01000,1000 found
mtrr: no MTRR for d0c02000,2000 found
mtrr: no MTRR for d0c04000,4000 found
mtrr: no MTRR for d0c08000,8000 found
mtrr: no MTRR for d0c10000,10000 found
mtrr: no MTRR for d0c20000,20000 found
mtrr: no MTRR for d0c40000,40000 found
mtrr: no MTRR for d0c80000,80000 found
mtrr: no MTRR for d0d00000,100000 found
mtrr: no MTRR for d0e00000,200000 found
mtrr: no MTRR for d1000000,100000 found
mtrr: no MTRR for d1100000,2000 found
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] AGP detected, AgpState   = 0x1f000a0b (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 116387840
[fglrx] max   LFB = 116387840
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 104849408
[fglrx] max   LFB = 104849408
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384
mtrr: no MTRR for d0c01000,1000 found
mtrr: no MTRR for d0c02000,2000 found
mtrr: no MTRR for d0c04000,4000 found
mtrr: no MTRR for d0c08000,8000 found
mtrr: no MTRR for d0c10000,10000 found
mtrr: no MTRR for d0c20000,20000 found
mtrr: no MTRR for d0c40000,40000 found
mtrr: no MTRR for d0c80000,80000 found
mtrr: no MTRR for d0d00000,100000 found
mtrr: no MTRR for d0e00000,200000 found
mtrr: no MTRR for d1000000,100000 found
mtrr: no MTRR for d1100000,2000 found
[fglrx] module unloaded - fglrx 8.8.25 [Jan 14 2005] on minor 0
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 8.8.25 [Jan 14 2005] on minor 0
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] AGP detected, AgpState   = 0x1f000a0b (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000302 (selected caps)
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 116387840
[fglrx] max   LFB = 116387840
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384
[fglrx] free  AGP = 54800384
[fglrx] max   AGP = 54800384
[fglrx] free  LFB = 104849408
[fglrx] max   LFB = 104849408
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 16384