[patch] Dialog Utility to install Gensplash

splashdialog.tar (text/plain), 40.00 KB, created by Massimiliano Adamo on 2005-01-09 10:17:18 UTC

splashdialog/0000755000000000001440000000000010170271514013653 5ustar  rootusers00000000000000splashdialog/genkernel0000755000000000000000000002144710170170370015372 0ustar  rootroot00000000000000#!/bin/bash
# Genkernel v3

GK_V='3.1.0c'
TEMP='/var/tmp/genkernel'
TODEBUGCACHE=1 # Until an error occurs or DEBUGFILE is fully qualified.

small_die() {
  echo $1
  exit 1
}

source /etc/genkernel.conf || small_die "Could not read /etc/genkernel.conf"
source ${GK_BIN}/gen_funcs.sh || small_die "Could not read ${GK_BIN}/gen_funcs.sh"
source ${GK_BIN}/gen_cmdline.sh || gen_die "Could not read ${GK_BIN}/gen_cmdline.sh"
source ${GK_BIN}/gen_arch.sh || gen_die "Could not read ${GK_BIN}/gen_arch.sh"
source ${GK_BIN}/gen_determineargs.sh || gen_die "Could not read ${GK_BIN}/gen_determineargs.sh"
source ${GK_BIN}/gen_compile.sh || gen_die "Could not read ${GK_BIN}/gen_compile.sh"
source ${GK_BIN}/gen_configkernel.sh || gen_die "Could not read ${GK_BIN}/gen_configkernel.sh"
source ${GK_BIN}/gen_initrd.sh || gen_die "Could not read ${GK_BIN}/gen_initrd.sh"
source ${GK_BIN}/gen_moddeps.sh || gen_die "Could not read ${GK_BIN}/gen_moddeps.sh"
source ${GK_BIN}/gen_package.sh || gen_die "Could not read ${GK_BIN}/gen_package.sh"
source ${GK_BIN}/gen_bootloader.sh || gen_die "Could not read ${GK_BIN}/gen_bootloader.sh"

BUILD_KERNEL=0
BUILD_INITRD=0

# Parse all command line options...
while [ $# -gt 0 ]
do
	Option=$1; shift
	parse_cmdline $Option
done

# Check if no action is specified...
if [ "${BUILD_KERNEL}" -eq 0 -a "${BUILD_INITRD}" -eq 0 ]
then
	usage
	exit 1
fi

clear_log
NORMAL=${GOOD} print_info 1 "Gentoo Linux Genkernel; Version ${GK_V}${NORMAL}"

# Set ${ARCH}
get_official_arch

# Read arch-specific config
source ${ARCH_CONFIG} || gen_die "Could not read ${ARCH_CONFIG}"
source ${GK_SHARE}/${ARCH}/modules_load || gen_die "Could not read ${GK_SHARE}/${ARCH}/modules_load"

[ ! -f "${TEMP}" ] && mkdir -p "${TEMP}"
[ ! -f "${CACHE_DIR}" ] && mkdir -p "${CACHE_DIR}"

# Based on genkernel.conf, arch-specific configs, and commandline options,
# get the real arguments for usage...

determine_real_args
dump_debugcache

NORMAL=${BOLD} print_info 1 "Compiling Linux Kernel ${BOLD}${KV}${NORMAL} for ${BOLD}${ARCH}${NORMAL}..."
echo

if [ "${BUILD_INITRD}" -ne '0' ]
then
	if ! has_loop
	then
		modprobe loop 2>/dev/null
		if ! has_loop
		then
			print_error 1 'Your kernel does not appear to have loop device support.'
			print_error 1 'Please load loop support before running genkernel!'
			gen_die 'Load loop support!'
		else
			print_info 1 'loop: "loop" module loaded successfully...'
		fi
	fi
fi

# Check /boot is mounted
if isTrue ${CMD_NOINSTALL}
then
	isTrue ${MOUNTBOOT} && print_info 2 'Skipping automatic mount of boot'
else
	if ! egrep -q ' /boot ' /proc/mounts
	then
		if egrep -q '^[^#].+	/boot	' /etc/fstab
		then
			if isTrue ${MOUNTBOOT}
			then
				if ! mount /boot
				then
					print_warning 1 "${BOLD}WARNING${NORMAL}: Failed to mount /boot!"
					echo
				else
					print_info 1 'mount: /boot mounted successfully!'
				fi
			else
				print_warning 1 "${BOLD}WARNING${NORMAL}: No mounted /boot partition detected!"
				print_warning 1 '         Run ``mount /boot`` to mount it!'
				echo
			fi
		fi
	elif isBootRO
	then
		if isTrue ${MOUNTBOOT}
		then
			if ! mount -o remount,rw /boot
			then
				print_warning 1 "${BOLD}WARNING${NORMAL}: Failed to remount /boot RW!"
				echo
			else
				print_info 1 "mount: /boot remounted read/write successfully!"
				BOOTRW=1
			fi
		fi
	fi
fi

# Check whether another Genkernel is running
GENPIDS="`ps -C genkernel --no-headers -o pid | wc -l`"
if [ "${GENPIDS}" -gt '3' ]
then
	[ "${GENPIDS}" -gt '4' ] && EX='s'
	print_warning 1 "${BOLD}WARNING${NORMAL}: Another Genkernel instance is running under"
	print_warning 1 "         process ID${EX} " 0
	GENPIDS=`ps -C genkernel --no-headers -o pid`
	echo -n "${GENPIDS}" | sed -e "s/$$//; s/ /, /g"
	echo 'halting...'
	echo
	print_warning 1 'Running multiple genkernels on the same source tree will cause data loss!'
	print_info 1 "Press ^C to halt; ^D to continue [ ${BOLD}if${NORMAL} you know what you're doing! ]"
	cat
	echo
	CTEMP="${TEMP}"
	TEMP="/var/tmp/genkernel-`dd if=/dev/random count=1 2>/dev/null | md5sum | cut -d\  -f1`"
	print_info 1 'thread: Running multiple genkernels may cause problems!'
	print_info 1 "thread: Temporary files reallocated to ${TEMP}..."
	echo
fi

if [ ${BUILD_KERNEL} -eq 1 ]
then
	# Configure kernel
	config_kernel

	# Make deps
	compile_dep

	# Make prepare [2.6]
	[ "${VER}" -gt '2' ] || [ "${VER}" -eq '2' -a "${PAT}" -ge '6' ] && compile_generic prepare kernel

	# Run postconf
	if [ "${CMD_POSTCONF}" != '' ]
	then
		print_info 1 '' 1 0
		print_info 1 "Preparing to run postconf: \"${CMD_POSTCONF}\"" 0

		CALLBACK_ESCAPE=0
		CALLBACK_COUNT=0

		trap "CALLBACK_ESCAPE=1" TERM KILL INT QUIT ABRT
		while [[ ${CALLBACK_ESCAPE} -eq 0 && ${CALLBACK_COUNT} -lt 5 ]]
		do
			sleep 1; echo -n '.';
			let CALLBACK_COUNT=${CALLBACK_COUNT}+1
		done

		if [ "${CALLBACK_ESCAPE}" -eq 0 ]
		then
			echo
			echo
			eval ${CMD_POSTCONF} | tee -a ${DEBUGFILE}
			echo
			print_info 1 "<<< Postconf callback exit status: ${PIPESTATUS[0]}"
		else
			echo
			print_info 1 '>>> Postconf cancelled...'
		fi
		trap - TERM KILL INT QUIT ABRT
		print_info 1 '' 1 0
	fi

#	if [ "${GENSPLASH}" -eq '1' ]
#	then
#		if [ -x /sbin/splash ]
#		then
#			[ -z "${GENSPLASH_THEME}" ] && [ -e /etc/conf.d/splash ] && source /etc/conf.d/splash
#			[ -z "${GENSPLASH_THEME}" ] && GENSPLASH_THEME=default
#			print_info 1 "	>> Installing gensplash [ using the ${GENSPLASH_THEME} theme ]..."
#			sed -i -e 's:$(obj)/gen_init_cpio $(initramfs-y) FORCE:$(if $(shell [ ! -f $(obj)/initramfs_data.cpio ] \&\& echo 1 ), $(obj)/gen_init_cpio $(initramfs-y)):' ${KERNEL_DIR}/usr/Makefile
#			splash_geninitramfs -g ${KERNEL_DIR}/usr/initramfs_data.cpio.gz ${GENSPLASH_THEME}
#		else
#			print_warning 1 '		>> No splash detected; skipping!'
#		fi
#	fi

	# Compile kernel
	compile_kernel

	# Compile modules
	compile_modules

	if [ ${SAVE_CONFIG} -eq 1 ]
	then
		print_info 1 "Copying config for successful build to /etc/kernels/kernel-config-${ARCH}-${KV}"
		[ ! -e '/etc/kernels' ] && mkdir -p /etc/kernels
		cp "${KERNEL_DIR}/.config" "/etc/kernels/kernel-config-${ARCH}-${KV}"
	fi
fi

# Run callback
if [ "${CMD_CALLBACK}" != "" ]
then
	print_info 1 "" 1 0
	print_info 1 "Preparing to run callback: \"${CMD_CALLBACK}\"" 0

	CALLBACK_ESCAPE=0
	CALLBACK_COUNT=0

	trap "CALLBACK_ESCAPE=1" TERM KILL INT QUIT ABRT
	while [[ ${CALLBACK_ESCAPE} -eq 0 && ${CALLBACK_COUNT} -lt 5 ]]
	do
		sleep 1; echo -n '.';
		let CALLBACK_COUNT=${CALLBACK_COUNT}+1
	done

	if [ "${CALLBACK_ESCAPE}" -eq 0 ]
	then
		echo
		echo
		eval ${CMD_CALLBACK} | tee -a ${DEBUGFILE}
		echo
		print_info 1 "<<< Callback exit status: ${PIPESTATUS[0]}"
	else
		echo
		print_info 1 ">>> Callback cancelled..."
	fi
	trap - TERM KILL INT QUIT ABRT
	print_info 1 "" 1 0
fi

if [ "${BUILD_INITRD}" -eq '1' ]
then
	# Compile dietlibc
	if [ "${USE_DIETLIBC}" = '1' ]
	then
		compile_dietlibc
	fi

	# Compile Busybox
	compile_busybox

	# Only compile insmod if we're installing modules onto the initrd
	if [ "${NOINITRDMODULES}" = '' ]
	then
		if [ "${PAT}" -gt '4' ]
		then
			# Compile module-init-tools
			compile_module_init_tools
		else
			compile_modutils
		fi
	fi

	compile_devfsd
	[ "${UDEV}" -eq '1' ] && compile_udev

	# Create initrd
	create_initrd
else
	print_info 1 'initrd: Not building since only the kernel was requested...'
fi
[ "${MINKERNPACKAGE}" != "" ] && gen_minkernpackage

# Clean up...
[ -n "${CTEMP}" ] && rm -rf "${TEMP}"

if [ "${BUILD_KERNEL}" -eq '1' ]
then
	set_bootloader
	print_info 1 ''
	print_info 1 "Kernel compiled successfully!"
	print_info 1 ''
	print_info 1 'Required Kernel Parameters:'
	if [ "${BUILD_INITRD}" -eq '0' ]
	then
		print_info 1 '    root=/dev/$ROOT'
		print_info 1 '    [ And "vga=0x317 splash=verbose" if you use a framebuffer ]'
		print_info 1 ''
		print_info 1 '    Where $ROOT is the device node for your root partition as the'
		print_info 1 '    one specified in /etc/fstab'
	else	
		print_info 1 '    root=/dev/ram0 real_root=/dev/$ROOT init=/linuxrc'
		[ "${INITRD_SIZE}" -ge 4096 ] && print_info 1 "    ramdisk_size=8192"
		print_info 1 '    [ And "vga=0x317 splash=verbose" if you use a framebuffer ]'
		print_info 1 ''
		print_info 1 '    Where $ROOT is the device node for your root partition as the'
		print_info 1 '    one specified in /etc/fstab'
		print_info 1 ''
		print_info 1 "If you require Genkernel's hardware detection features; you MUST"
		print_info 1 'tell your bootloader to use the provided initrd file. Otherwise;'
		print_info 1 'substitute the root argument for the real_root argument if you are'
		print_info 1 'not planning to use the initrd...'
	fi
else
	print_info 1 ''
	print_info 1 'initrd compiled successfully!'
fi

[ "${BOOTRW}" != '' ] && mount -o remount,ro /boot

print_info 1 ''
print_info 1 'Do NOT report kernel bugs as genkernel bugs unless your bug'
print_info 1 'is about the default genkernel configuration...'
print_info 1 ''
print_info 1 'Make sure you have the latest genkernel before reporting bugs.'
splashdialog/resolution.sh0000755000000000000000000000715510170271462016240 0ustar  rootroot00000000000000#!/bin/sh
# by maxadamo <[e-mail]>

TEMP='/var/tmp/genkernel'
choose_resolution="${TEMP}/choose_resolution"

mall_die() {
  echo $1
  exit 1
}

source /etc/genkernel.conf || small_die "Could not read /etc/genkernel.conf"
source ${GK_BIN}/gen_funcs.sh || small_die "Could not read ${GK_BIN}/gen_funcs.sh"
source ${GK_BIN}/gen_cmdline.sh || gen_die "Could not read ${GK_BIN}/gen_cmdline.sh"
source ${GK_BIN}/gen_arch.sh || gen_die "Could not read ${GK_BIN}/gen_arch.sh"
source ${GK_BIN}/gen_determineargs.sh || gen_die "Could not read ${GK_BIN}/gen_determineargs.sh"
source ${GK_BIN}/gen_compile.sh || gen_die "Could not read ${GK_BIN}/gen_compile.sh"
source ${GK_BIN}/gen_configkernel.sh || gen_die "Could not read ${GK_BIN}/gen_configkernel.sh"
source ${GK_BIN}/gen_initrd.sh || gen_die "Could not read ${GK_BIN}/gen_initrd.sh"
source ${GK_BIN}/gen_moddeps.sh || gen_die "Could not read ${GK_BIN}/gen_moddeps.sh"
source ${GK_BIN}/gen_package.sh || gen_die "Could not read ${GK_BIN}/gen_package.sh"
source ${GK_BIN}/gen_bootloader.sh || gen_die "Could not read ${GK_BIN}/gen_boot"


installed_resolutions () {
ls /etc/splash/default/*.cfg|sed -e s,.*default\/,, -e s,\.cfg,,|sort -t x -nk 1|sort -t x -nk 2
}

dialog_list () {
installed_resolutions | sed -e s,^,\", -e s,$,\"\ \"\"\ \\\\,
}



cat >$choose_resolution <<EOF
#!/bin/sh

TEMP='/var/tmp/genkernel'
choose_theme="${TEMP}/choose_theme"
KERNEL_DIR=/usr/src/linux

small_die() {
  echo $1
  exit 1
}

source /etc/genkernel.conf || small_die "Could not read /etc/genkernel.conf"
source \${GK_BIN}/gen_funcs.sh || small_die "Could not read \${GK_BIN}/gen_funcs.sh"
source \${GK_BIN}/gen_cmdline.sh || gen_die "Could not read \${GK_BIN}/gen_cmdline.sh"
source \${GK_BIN}/gen_arch.sh || gen_die "Could not read \${GK_BIN}/gen_arch.sh"
source \${GK_BIN}/gen_determineargs.sh || gen_die "Could not read \${GK_BIN}/gen_determineargs.sh"
source \${GK_BIN}/gen_compile.sh || gen_die "Could not read \${GK_BIN}/gen_compile.sh"
source \${GK_BIN}/gen_configkernel.sh || gen_die "Could not read \${GK_BIN}/gen_configkernel.sh"
source \${GK_BIN}/gen_initrd.sh || gen_die "Could not read \${GK_BIN}/gen_initrd.sh"
source \${GK_BIN}/gen_moddeps.sh || gen_die "Could not read \${GK_BIN}/gen_moddeps.sh"
source \${GK_BIN}/gen_package.sh || gen_die "Could not read \${GK_BIN}/gen_package.sh"
source \${GK_BIN}/gen_bootloader.sh || gen_die "Could not read \${GK_BIN}/gen_bootloader.sh"
    

chosen_theme ()
{
find /etc/splash/default/ -type f -maxdepth 1 | grep -v cfg | sed -e s,.*default\/\.,,
}
chosen_theme=\`chosen_theme\`

# \$Id: menubox9,v 1.1 2003/09/23 23:02:08 tom Exp $
: \${DIALOG=dialog}

exec 3>&1
resolution=\`\$DIALOG \\
	--clear \\
	--title "Gensplash Kernel Install Utility" \\
	--menu \\
"\\nChoose between one of the resolutions \\
available for you theme:" 15 46 6 \\
EOF

dialog_list >> $choose_resolution

cat >>$choose_resolution <<EOF
2>&1 1>&3\`
retval=\$?
exec 3>&-

case \$retval in
  0)
    find /etc/splash/default/ -type f | grep -v \$resolution | xargs rm
    splash_geninitramfs -g \${KERNEL_DIR}/usr/initramfs_data.cpio.gz -r \${resolution} default
    gunzip -f \${KERNEL_DIR}/usr/initramfs_data.cpio.gz
    splash_geninitramfs -g \${KERNEL_DIR}/usr/initramfs_data.cpio.gz -r \${resolution} default
    echo "Theme \$chosen_theme with resolution \${resolution} chosen."
    echo "Now you can run genkernel using the option --gensplash=default"
    echo "Don't forget to modify your boot loader configuration.";;
  1)
    echo "Cancel pressed.";;
  255)
    if test -n "\$resolution" ; then
      echo "\$resolution"
    else
      echo "ESC pressed."
    fi
    ;;
esac


EOF

. $choose_resolution

splashdialog/README_BEFORE.txt0000644000000000000000000000075710170271511016212 0ustar  rootroot00000000000000Splash Utility Tools/README_file
by maxadamo <[e-mail]>


If you want to see Splash working at boot time you can use this script.

To use the script:

1) Copy "resolution.sh" to /usr/share/genkernel

2) Copy "splashdialog" to a location on your $PATH

3) replace "gen_initrd.sh" already present in /usr/share/genkernel

4) replace "genkernel" already present in /usr/bin


NOTE: 
In "gen_initrd.sh" I have added the row 33
In "genkernel" I commented out rows from 184 to 196

splashdialog/splashdialog0000755000000000000000000000632010170174264016071 0ustar  rootroot00000000000000#!/bin/sh
# by maxadamo <[e-mail]>

TEMP='/var/tmp/genkernel'
choose_theme="${TEMP}/choose_theme"

small_die() {
  echo $1
  exit 1
}

source /etc/genkernel.conf || small_die "Could not read /etc/genkernel.conf"
source ${GK_BIN}/gen_funcs.sh || small_die "Could not read ${GK_BIN}/gen_funcs.sh"
source ${GK_BIN}/gen_cmdline.sh || gen_die "Could not read ${GK_BIN}/gen_cmdline.sh"
source ${GK_BIN}/gen_arch.sh || gen_die "Could not read ${GK_BIN}/gen_arch.sh"
source ${GK_BIN}/gen_determineargs.sh || gen_die "Could not read ${GK_BIN}/gen_determineargs.sh"
source ${GK_BIN}/gen_compile.sh || gen_die "Could not read ${GK_BIN}/gen_compile.sh"
source ${GK_BIN}/gen_configkernel.sh || gen_die "Could not read ${GK_BIN}/gen_configkernel.sh"
source ${GK_BIN}/gen_initrd.sh || gen_die "Could not read ${GK_BIN}/gen_initrd.sh"
source ${GK_BIN}/gen_moddeps.sh || gen_die "Could not read ${GK_BIN}/gen_moddeps.sh"
source ${GK_BIN}/gen_package.sh || gen_die "Could not read ${GK_BIN}/gen_package.sh"
source ${GK_BIN}/gen_bootloader.sh || gen_die "Could not read ${GK_BIN}/gen_bootloader.sh"



installed_themes () {
find /etc/splash/ -type d -maxdepth 1 | sed -e s,.*splash\/,, -e 1D | grep -vw default
}

dialog_list () {
installed_themes| sed -e s,^,\", -e s,$,\"\ \"\"\ \\\\,
}

if [[ -z ${TEMP}/installed_themes ]]; then
   echo -e "\nI cannot find any Gensplash Theme installed\n"
   exit 1
fi



cat >$choose_theme <<EOF
#!/bin/sh
TEMP='/var/tmp/genkernel'
choose_theme="${TEMP}/choose_theme"
KERNEL_DIR=/usr/src/linux

small_die() {
  echo $1
  exit 1
}
source /etc/genkernel.conf || small_die "Could not read /etc/genkernel.conf"
source \${GK_BIN}/gen_funcs.sh || small_die "Could not read \${GK_BIN}/gen_funcs.sh"
source \${GK_BIN}/gen_cmdline.sh || gen_die "Could not read \${GK_BIN}/gen_cmdline.sh"
source \${GK_BIN}/gen_arch.sh || gen_die "Could not read \${GK_BIN}/gen_arch.sh"
source \${GK_BIN}/gen_determineargs.sh || gen_die "Could not read \${GK_BIN}/gen_determineargs.sh"
source \${GK_BIN}/gen_compile.sh || gen_die "Could not read \${GK_BIN}/gen_compile.sh"
source \${GK_BIN}/gen_configkernel.sh || gen_die "Could not read \${GK_BIN}/gen_configkernel.sh"
source \${GK_BIN}/gen_initrd.sh || gen_die "Could not read \${GK_BIN}/gen_initrd.sh"
source \${GK_BIN}/gen_moddeps.sh || gen_die "Could not read \${GK_BIN}/gen_moddeps.sh"
source \${GK_BIN}/gen_package.sh || gen_die "Could not read \${GK_BIN}/gen_package.sh"
source \${GK_BIN}/gen_bootloader.sh || gen_die "Could not read \${GK_BIN}/gen_bootloader.sh"

    
# \$Id: menubox9,v 1.1 2003/09/23 23:02:08 tom Exp $
: \${DIALOG=dialog}

exec 3>&1
theme=\`\$DIALOG \\
	--clear \\
	--title "Gensplash Kernel Install Utility" \\
	--menu \\
"\\nScroll up and down and press enter \\
to select your preferred theme:" 15 46 6 \\
EOF

dialog_list >> $choose_theme

cat >>$choose_theme <<EOF
2>&1 1>&3\`
retval=\$?
exec 3>&-

case \$retval in
  0)
    echo "\$theme chosen."
    rm -fr /etc/splash/default
    cp -a "/etc/splash/\$theme" /etc/splash/default
    touch "/etc/splash/default/.\$theme";;
    1)
    echo "Cancel pressed."
    exit 0;;
  255)
    if test -n "\$theme" ; then
      echo "\$theme"
    else
      echo "ESC pressed."
    fi
    ;;
esac

\${GK_BIN}/resolution.sh

EOF

. $choose_theme

splashdialog/gen_initrd.sh0000755000000000000000000002654510170174762016170 0ustar  rootroot00000000000000#!/bin/bash

# create_initrd_loop(size)
create_initrd_loop() {
	local inodes
	[ "$#" -ne '1' ] && gen_die 'create_initrd_loop(): Not enough arguments!'
	mkdir -p ${TEMP}/initrd-mount ||
		gen_die 'Could not create loopback mount directory!'
	dd if=/dev/zero of=${TEMP}/initrd-${KV} bs=1k count=${1} >> "${DEBUGFILE}" 2>&1 ||
		gen_die "Could not zero initrd-${KV}"
	mke2fs -F -N500 -q "${TEMP}/initrd-${KV}" >> "${DEBUGFILE}" 2>&1 ||
		gen_die "Could not format initrd-${KV}!"
	mount -t ext2 -o loop "${TEMP}/initrd-${KV}" "${TEMP}/initrd-mount" >> "${DEBUGFILE}" 2>&1 ||
		gen_die 'Could not mount the initrd filesystem!'
}

create_initrd_unmount_loop()
{
	cd ${TEMP}
	umount "${TEMP}/initrd-mount" ||
		gen_die 'Could not unmount initrd system!'
}

move_initrd_to_loop()
{
	cd "${TEMP}/initrd-temp"
	mv * "${TEMP}/initrd-mount" >> ${DEBUGFILE} 2>&1
}

create_base_initrd_sys() {
	rm -rf "${TEMP}/initrd-temp" > /dev/null
	mkdir -p ${TEMP}/initrd-temp
	mkdir -p ${TEMP}/initrd-temp/dev
	mkdir -p ${TEMP}/initrd-temp/bin
	mkdir -p ${TEMP}/initrd-temp/etc
	mkdir -p ${TEMP}/initrd-temp/usr
	mkdir -p ${TEMP}/initrd-temp/proc
	mkdir -p ${TEMP}/initrd-temp/temp
	mkdir -p ${TEMP}/initrd-temp/sys
	mkdir -p ${TEMP}/initrd-temp/.initrd
	ln -s bin ${TEMP}/initrd-temp/sbin
	ln -s ../bin ${TEMP}/initrd-temp/usr/bin
	ln -s ../bin ${TEMP}/initrd-temp/usr/sbin
	(cd ${TEMP}/initrd-temp; cpio -i -u --quiet < ${KERNEL_DIR}/usr/initramfs_data.cpio) || gen_die 'Could not copy splash files'

	echo "/dev/ram0     /           ext2    defaults" > ${TEMP}/initrd-temp/etc/fstab
	echo "proc          /proc       proc    defaults    0 0" >> ${TEMP}/initrd-temp/etc/fstab

	echo "REGISTER        .*           MKOLDCOMPAT" > ${TEMP}/initrd-temp/etc/devfsd.conf
	echo "UNREGISTER      .*           RMOLDCOMPAT" >> ${TEMP}/initrd-temp/etc/devfsd.conf
	echo "REGISTER        .*           MKNEWCOMPAT" >> ${TEMP}/initrd-temp/etc/devfsd.conf
	echo "UNREGISTER      .*           RMNEWCOMPAT" >> ${TEMP}/initrd-temp/etc/devfsd.conf

	cd ${TEMP}/initrd-temp/dev
	MAKEDEV std
	MAKEDEV console

	cp "${BUSYBOX_BINCACHE}" "${TEMP}/initrd-temp/bin/busybox.bz2" ||
		gen_die 'Could not copy busybox from bincache!'
	bunzip2 "${TEMP}/initrd-temp/bin/busybox.bz2" ||
		gen_die 'Could not uncompress busybox!'
	chmod +x "${TEMP}/initrd-temp/bin/busybox"

	if [ "${NOINITRDMODULES}" = '' ]
	then
		if [ "${PAT}" -gt "4" ]
		then
			cp "${MODULE_INIT_TOOLS_BINCACHE}" "${TEMP}/initrd-temp/bin/insmod.static.bz2" ||
				gen_die 'Could not copy insmod.static from bincache!'
		else
			cp "${MODUTILS_BINCACHE}" "${TEMP}/initrd-temp/bin/insmod.static.bz2" ||
				gen_die 'Could not copy insmod.static from bincache'
		fi

		bunzip2 "${TEMP}/initrd-temp/bin/insmod.static.bz2" ||
			gen_die 'Could not uncompress insmod.static!'
		mv "${TEMP}/initrd-temp/bin/insmod.static" "${TEMP}/initrd-temp/bin/insmod"
		chmod +x "${TEMP}/initrd-temp/bin/insmod"
	fi

	cp "${DEVFSD_BINCACHE}" "${TEMP}/initrd-temp/bin/devfsd.bz2" || gen_die "could not copy devfsd executable from bincache"
	bunzip2 "${TEMP}/initrd-temp/bin/devfsd.bz2" || gen_die "could not uncompress devfsd"
	chmod +x "${TEMP}/initrd-temp/bin/devfsd"

	[ "${UDEV}" -eq '1' ] && { tar -jxpf "${UDEV_BINCACHE}" -C "${TEMP}/initrd-temp" ||
		gen_die "Could not extract udev binary cache!"; }
		ln -sf "./udev" "${TEMP}/initrd-temp/bin/udevstart" ||
			gen_die 'Could not symlink udev -> udevstart!'

# We make our own devfsd.conf these days, the default one doesn't work with the stripped
# down devfsd we use with dietlibc
#	cp "${DEVFSD_CONF_BINCACHE}" "${TEMP}/initrd-temp/etc/devfsd.conf.bz2" ||
#		gen_die "could not copy devfsd.conf from bincache"
#	bunzip2 "${TEMP}/initrd-temp/etc/devfsd.conf.bz2" ||
#		gen_die "could not uncompress devfsd.conf"

	# LVM2
	if [ "${LVM2}" -eq '1' ]
	then
		if [ -e '/sbin/lvm' ] && ldd /sbin/lvm|grep -q 'not a dynamic executable';
		then
			print_info 1 'LVM2: Adding support (using local static binaries)...'
			cp /sbin/lvm "${TEMP}/initrd-temp/bin/lvm" ||
				gen_die 'Could not copy over lvm!'
			ln -sf "${TEMP}/initrd-temp/bin/lvm" "${TEMP}/initrd-temp/bin/vgscan" ||
				gen_die 'Could not symlink lvm -> vgscan!'
			ln -sf "${TEMP}/initrd-temp/bin/lvm" "${TEMP}/initrd-temp/bin/vgchange" ||
				gen_die 'Could not symlink lvm -> vgchange!'
		else
			print_info 1 'LVM2: Adding support (compiling binaries)...'
			compile_lvm2

			tar -jxpf "${LVM2_BINCACHE}" -C "${TEMP}/initrd-temp" ||
				gen_die "Could not extract lvm2 binary cache!";
			mv ${TEMP}/initrd-temp/bin/lvm.static ${TEMP}/initrd-temp/bin/lvm ||
				gen_die 'LVM2 error: Could not move lvm.static to lvm!'
			for i in vgchange vgscan; do
				ln  ${TEMP}/initrd-temp/bin/lvm ${TEMP}/initrd-temp/bin/$i ||
					gen_die "LVM2 error: Could not link ${i}!"
			done
		fi	
	else # Deprecation warning; remove in a few versions.
		if [ -e '/sbin/lvm' ]
		then
			if ldd /sbin/lvm|grep -q 'not a dynamic executable';
			then
				print_warning 1 'LVM2: For support, use --lvm2!'
			fi
		fi
	fi
	
	# EVMS2
	if [ -e '/sbin/evms_activate' ]
	then
		if [ "${CMD_NOEVMS2}" != '1' ]
		then
			print_info 1 'EVMS2: Adding support...'	
			mkdir -p ${TEMP}/initrd-temp/lib
			cp -a /lib/ld-* "${TEMP}/initrd-temp/lib" || gen_die 'Could not copy files for EVMS2!'
			cp -a /lib/libc-* /lib/libc.* "${TEMP}/initrd-temp/lib" || gen_die 'Could not copy files for EVMS2!'
			cp -a /lib/libdl-* /lib/libdl.* "${TEMP}/initrd-temp/lib" || gen_die 'Could not copy files for EVMS2!'
			cp -a /lib/libpthread* "${TEMP}/initrd-temp/lib" || gen_die 'Could not copy files for EVMS2!'
			cp -a /lib/libuuid*so* "${TEMP}/initrd-temp/lib" || gen_die 'Could not copy files for EVMS2!'
			cp -a /lib/libevms*so* "${TEMP}/initrd-temp/lib" || gen_die 'Could not copy files for EVMS2!'
			cp -a /lib/evms "${TEMP}/initrd-temp/lib" || gen_die 'Could not copy files for EVMS2!'
			cp -a /lib/evms/* "${TEMP}/initrd-temp/lib/evms" || gen_die 'Could not copy files for EVMS2!'
			cp -a /etc/evms.conf "${TEMP}/initrd-temp/etc" || gen_die 'Could not copy files for EVMS2!'
			cp /sbin/evms_activate "${TEMP}/initrd-temp/bin/evms_activate" || gen_die 'Could not copy over vgscan!'
		fi
	fi	

	for i in '[' ash basename cat chroot clear cp dirname echo env false find \
	grep gunzip gzip ln ls loadkmap losetup lsmod mkdir mknod more mount mv \
	pivot_root ps awk pwd rm rmdir rmmod sed sh sleep tar test touch true umount uname \
	xargs yes zcat chmod chown cut kill killall; do
		rm -f ${TEMP}/initrd-temp/bin/$i > /dev/null
		ln  ${TEMP}/initrd-temp/bin/busybox ${TEMP}/initrd-temp/bin/$i ||
			gen_die "Busybox error: could not link ${i}!"
	done
}

print_list()
{
	local x
	for x in ${*}
	do
		echo ${x}
	done
}

create_initrd_modules() {
	local group
	local group_modules
	
	if [ "${PAT}" -gt "4" ]
	then
		MOD_EXT=".ko"
	else
		MOD_EXT=".o"
	fi

	print_info 2 "initrd: >> Searching for modules..."
	if [ "${INSTALL_MOD_PATH}" != '' ]
	then
	  cd ${INSTALL_MOD_PATH}
	else
	  cd /
	fi
	for i in `gen_dep_list`
	do
		mymod=`find ./lib/modules/${KV} -name "${i}${MOD_EXT}" | head -n 1`
		if [ -z "${mymod}" ]
		then
			print_warning 2 "Warning :: ${i}${MOD_EXT} not found; skipping..."
			continue;
		fi
		print_info 2 "initrd: >> Copying ${i}${MOD_EXT}..."
		cp -ax --parents "${mymod}" "${TEMP}/initrd-temp"
	done

	cp -ax --parents ./lib/modules/${KV}/modules* ${TEMP}/initrd-temp

	mkdir -p "${TEMP}/initrd-temp/etc/modules"
	for group_modules in ${!MODULES_*}; do
		group="$(echo $group_modules | cut -d_ -f2 | tr "[:upper:]" "[:lower:]")"
		print_list ${!group_modules} > "${TEMP}/initrd-temp/etc/modules/${group}"
	done
}

create_initrd_aux() {
	if [ -f "${CMD_LINUXRC}" ]
	then
		cp "${CMD_LINUXRC}" "${TEMP}/initrd-temp/linuxrc"
		print_info 2 "        >> Copying user specified linuxrc: ${CMD_LINUXRC}"
	else	
		if [ -f "${GK_SHARE}/${ARCH}/linuxrc" ]
		then
			cp "${GK_SHARE}/${ARCH}/linuxrc" "${TEMP}/initrd-temp/linuxrc"
		else
			cp "${GK_SHARE}/generic/linuxrc" "${TEMP}/initrd-temp/linuxrc"
		fi
	fi

	if [ -f "${GK_SHARE}/${ARCH}/initrd.scripts" ]
	then
		cp "${GK_SHARE}/${ARCH}/initrd.scripts" "${TEMP}/initrd-temp/etc/initrd.scripts"
	else	
		cp "${GK_SHARE}/generic/initrd.scripts" "${TEMP}/initrd-temp/etc/initrd.scripts"
	fi

	if [ -f "${GK_SHARE}/${ARCH}/initrd.defaults" ]
	then
		cp "${GK_SHARE}/${ARCH}/initrd.defaults" "${TEMP}/initrd-temp/etc/initrd.defaults"
	else
		cp "${GK_SHARE}/generic/initrd.defaults" "${TEMP}/initrd-temp/etc/initrd.defaults"
	fi
	
	echo -n 'HWOPTS="$HWOPTS ' >> "${TEMP}/initrd-temp/etc/initrd.defaults"	
	for group_modules in ${!MODULES_*}; do
		group="$(echo $group_modules | cut -d_ -f2 | tr "[:upper:]" "[:lower:]")"
		echo -n "${group} " >> "${TEMP}/initrd-temp/etc/initrd.defaults"
	done
	echo '"' >> "${TEMP}/initrd-temp/etc/initrd.defaults"	

	if [ -f "${GK_SHARE}/${ARCH}/modprobe" ]
	then
		cp "${GK_SHARE}/${ARCH}/modprobe" "${TEMP}/initrd-temp/sbin/modprobe"
	else
		cp "${GK_SHARE}/generic/modprobe" "${TEMP}/initrd-temp/sbin/modprobe"
	fi
	if isTrue $CMD_DOKEYMAPAUTO
	then
		echo 'MY_HWOPTS="${MY_HWOPTS} keymap"' >> ${TEMP}/initrd-temp/etc/initrd.defaults
	fi
	mkdir -p "${TEMP}/initrd-temp/lib/keymaps"
	tar -C "${TEMP}/initrd-temp/lib/keymaps" -zxf "${GK_SHARE}/generic/keymaps.tar.gz"

	cd ${TEMP}/initrd-temp/sbin && ln -s ../linuxrc init
	cd ${OLDPWD}
	chmod +x "${TEMP}/initrd-temp/linuxrc"
	chmod +x "${TEMP}/initrd-temp/etc/initrd.scripts"
	chmod +x "${TEMP}/initrd-temp/etc/initrd.defaults"
	chmod +x "${TEMP}/initrd-temp/sbin/modprobe"
}

calc_initrd_size() {
	local TEST
	cd ${TEMP}/initrd-temp/
	TEST=`du -sk 2> /dev/null` 
	echo $TEST | cut "-d " -f1
}

create_initrd() {
	local MOD_EXT

	print_info 1 "initrd: >> Initializing..."
	create_base_initrd_sys

	if [ "${NOINITRDMODULES}" = '' ]
	then
		print_info 1 "        >> Copying modules..."
		create_initrd_modules
	else
		print_info 1 "initrd: Not copying modules..."
	fi

	print_info 1 "        >> Copying auxilary files..."
	create_initrd_aux

	INITRD_CALC_SIZE=`calc_initrd_size`
	INITRD_SIZE=`expr ${INITRD_CALC_SIZE} + 100`
	print_info 1 "        :: Size is at ${INITRD_SIZE}K"

	print_info 1 "        >> Creating loopback filesystem..."
	create_initrd_loop ${INITRD_SIZE}

	print_info 1 "        >> Moving initrd files to the loopback..."
	move_initrd_to_loop

	print_info 1 "        >> Cleaning up and compressing the initrd..."
	create_initrd_unmount_loop

	if [ "${COMPRESS_INITRD}" ]
	then
		gzip -f -9 ${TEMP}/initrd-${KV}
		mv ${TEMP}/initrd-${KV}.gz ${TEMP}/initrd-${KV}
	fi

	if [ "${BOOTSPLASH}" -eq "1" ]
	then
		if [ -x /sbin/splash ]
		then
			[ -z "${BOOTSPLASH_THEME}" ] && [ -e /etc/conf.d/bootsplash.conf ] && source /etc/conf.d/bootsplash.conf
			[ -z "${BOOTSPLASH_THEME}" ] && [ -e /etc/conf.d/bootsplash ] && source /etc/conf.d/bootsplash
			[ -z "${BOOTSPLASH_THEME}" ] && BOOTSPLASH_THEME=default
			print_info 1 "        >> Installing bootsplash [ using the ${BOOTSPLASH_THEME} theme ]..."
			for bootRes in '800x600' '1024x768' '1280x1024' '1600x1200'
			do
				if [ -f "/etc/bootsplash/${BOOTSPLASH_THEME}/config/bootsplash-${bootRes}.cfg" ]
				then
					/sbin/splash -s -f /etc/bootsplash/${BOOTSPLASH_THEME}/config/bootsplash-${bootRes}.cfg >> ${TEMP}/initrd-${KV} ||
						gen_die "Error: could not copy ${bootRes} bootsplash!"
				else
					print_warning 1 "splash: Did not find a bootsplash for the ${bootRes} resolution..."
				fi
			done
		else
			print_warning 1 '        >> No bootsplash detected; skipping!'
		fi
	fi
	if ! isTrue "${CMD_NOINSTALL}"
	then
		cp ${TEMP}/initrd-${KV} /boot/initrd-${KV} ||
			gen_die 'Could not copy the initrd to /boot!'
	fi
}