Kernel boot messages

boot_msg.txt (text/plain), 56.93 KB, created by holbugs on 2017-05-09 00:35:10 UTC

Linux version 4.11.0-gentoo (root@maxwell) (gcc version 5.4.0 (Gentoo 5.4.0-r3 p1.3, pie-0.6.5) ) #1 SMP PREEMPT Sun May 7 13:53:45 CDT 2017
Command line: BOOT_IMAGE=/vmlinuz-4.11.0-gentoo root=/dev/sda4 ro console=tty0 console=ttyS0,115200n8
KERNEL supported cpus:
  Intel GenuineIntel
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000077b5efff] usable
BIOS-e820: [mem 0x0000000077b5f000-0x0000000078b6efff] reserved
BIOS-e820: [mem 0x0000000078b6f000-0x00000000797d2fff] ACPI NVS
BIOS-e820: [mem 0x00000000797d3000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000407fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro X10DAi/X10DAC, BIOS 2.0a 11/09/2016
e820: last_pfn = 0x4080000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
x2apic: enabled by BIOS, switching to x2apic ops
e820: last_pfn = 0x77b5f max_arch_pfn = 0x400000000
Using GB pages for direct mapping
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000078F9F0A8 0000CC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x0000000078FD0A10 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x0000000078F9F208 031808 (v02 ALASKA A M I    01072009 INTL 20091013)
ACPI: FACS 0x00000000797D1F80 000040
ACPI: APIC 0x0000000078FD0B20 000304 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x0000000078FD0E28 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x0000000078FD0E70 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x0000000078FD0F10 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: UEFI 0x0000000078FD0F50 000042 (v01 ALASKA A M I    01072009      00000000)
ACPI: MCEJ 0x0000000078FD0F98 000130 (v01 INTEL           00000001 INTL 0100000D)
ACPI: HPET 0x0000000078FD10C8 000038 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: MSCT 0x0000000078FD1100 000090 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SLIT 0x0000000078FD1190 000030 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SRAT 0x0000000078FD11C0 001158 (v03 ALASKA A M I    00000001 INTL 20091013)
ACPI: WDDT 0x0000000078FD2318 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: SSDT 0x0000000078FD2358 01717F (v02 ALASKA PmMgt    00000001 INTL 20120913)
ACPI: SSDT 0x0000000078FE94D8 002652 (v02 ALASKA SpsNm    00000002 INTL 20120913)
ACPI: SSDT 0x0000000078FEBB30 000064 (v02 ALASKA SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 0x0000000078FEBB98 000102 (v02 ALASKA A M I    00000002 INTL 20120913)
ACPI: DMAR 0x0000000078FEBCA0 000168 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: HEST 0x0000000078FEBE08 000340 (v01 ALASKA A M I    00000001 INTL 00000001)
ACPI: BERT 0x0000000078FEC148 000030 (v01 ALASKA A M I    00000001 INTL 00000001)
ACPI: ERST 0x0000000078FEC178 000230 (v01 ALASKA A M I    00000001 INTL 00000001)
ACPI: EINJ 0x0000000078FEC3A8 000150 (v01 ALASKA A M I    00000001 INTL 00000001)
Setting APIC routing to cluster x2apic.
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x1a -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x36 -> Node 1
SRAT: PXM 1 -> APIC 0x38 -> Node 1
SRAT: PXM 1 -> APIC 0x3a -> Node 1
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: PXM 0 -> APIC 0x1b -> Node 0
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: PXM 1 -> APIC 0x37 -> Node 1
SRAT: PXM 1 -> APIC 0x39 -> Node 1
SRAT: PXM 1 -> APIC 0x3b -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x207fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x2080000000-0x407fffffff]
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x207fffffff] -> [mem 0x00000000-0x207fffffff]
NODE_DATA(0) allocated [mem 0x207fffc000-0x207fffffff]
NODE_DATA(1) allocated [mem 0x407fff9000-0x407fffcfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000407fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009afff]
  node   0: [mem 0x0000000000100000-0x0000000077b5efff]
  node   0: [mem 0x0000000100000000-0x000000207fffffff]
  node   1: [mem 0x0000002080000000-0x000000407fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff]
Initmem setup node 1 [mem 0x0000002080000000-0x000000407fffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x28] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x30] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x32] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x34] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x36] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x38] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x29] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x31] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x33] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x35] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x37] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x39] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3b] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 48 CPUs, 0 hotplug CPUs
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:48 nr_node_ids:2
percpu: Embedded 36 pages/cpu @ffff881fffa00000 s109592 r8192 d29672 u262144
Built 2 zonelists in Node order, mobility grouping on.  Total pages: 66026742
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-gentoo root=/dev/sda4 ro console=tty0 console=ttyS0,115200n8
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 192512 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 246664(94%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 264013240K/268299236K available (10650K kernel code, 1499K rwdata, 3916K rodata, 1436K init, 684K bss, 4285996K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=48, Nodes=2
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=48.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=48
NR_IRQS:4352 nr_irqs:1624 16
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
tsc: Fast TSC calibration using PIT
tsc: Detected 3000.040 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.08 BogoMIPS (lpj=3000040)
pid_max: default: 49152 minimum: 384
ACPI: Core revision 20170119
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mountpoint-cache hash table entries: 524288 (order: 10, 4194304 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 40K
ftrace: allocating 38125 entries in 149 pages
smpboot: Max logical packages: 4
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: DRHD base: 0x000000f3ffc000 flags: 0x1
DMAR: dmar1: reg_base_addr f3ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007b461000 end: 0x0000007b470fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000f3ffc000 proximity domain: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x1
DMAR-IR: IOAPIC id 3 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 1 under DRHD base  0xf3ffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base  0xf3ffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xf3ffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2687W v4 @ 3.00GHz (family: 0x6, model: 0x4f, stepping: 0x1)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
.... node  #1, CPUs:   #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
.... node  #0, CPUs:   #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35
.... node  #1, CPUs:   #36 #37 #38 #39 #40 #41 #42 #43 #44 #45 #46 #47
smp: Brought up 2 nodes, 48 CPUs
smpboot: Total of 48 processors activated (288351.12 BogoMIPS)
sched_clock: Marking stable (3347000000, 0)->(3479810444, -132810444)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x78b6f000-0x797d2fff] (12992512 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes)
xor: automatically using best checksumming function   avx       
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
raid6: sse2x1   gen()  9859 MB/s
raid6: sse2x1   xor()  7462 MB/s
raid6: sse2x2   gen() 12035 MB/s
raid6: sse2x2   xor()  8496 MB/s
raid6: sse2x4   gen() 14234 MB/s
raid6: sse2x4   xor() 10013 MB/s
raid6: avx2x1   gen() 18984 MB/s
raid6: avx2x1   xor() 14238 MB/s
raid6: avx2x2   gen() 22402 MB/s
raid6: avx2x2   xor() 15154 MB/s
raid6: avx2x4   gen() 25464 MB/s
raid6: avx2x4   xor() 18548 MB/s
raid6: using algorithm avx2x4 gen() 25464 MB/s
raid6: .... xor() 18548 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:02: _OSC: platform does not support [PCIeHotplug AER]
acpi PNP0A03:02: _OSC: OS now controls [PME PCIeCapability]
acpi PNP0A03:02: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug AER]
acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug AER]
acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xf3ffbfff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: Enabling MPC IRBNCE
pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: Enabling MPC IRBNCE
pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: Enabling MPC IRBNCE
pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 07-3f]
pci 0000:07:00.0: PCI bridge to [bus 08]
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [PCIeHotplug AER]
acpi PNP0A08:01: _OSC: OS now controls [PME PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io  0x8000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xf4000000-0xfbffbfff window]
pci_bus 0000:80: root bus resource [bus 80-fe]
pci 0000:80:01.0: System wakeup disabled by ACPI
pci 0000:80:02.0: System wakeup disabled by ACPI
pci 0000:80:03.0: System wakeup disabled by ACPI
pci 0000:80:03.2: System wakeup disabled by ACPI
pci 0000:80:01.0: PCI bridge to [bus 81-82]
pci 0000:81:00.0: PCI bridge to [bus 82]
pci 0000:80:02.0: PCI bridge to [bus 83]
pci 0000:80:03.0: PCI bridge to [bus 84]
pci 0000:80:03.2: PCI bridge to [bus 85]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[e-mail]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
FS-Cache: Loaded
pnp: PnP ACPI init
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: BAR 9: assigned [mem 0xb2000000-0xb21fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:01.0:   bridge window [mem 0xf0100000-0xf02fffff]
pci 0000:00:01.0:   bridge window [mem 0xb2000000-0xb21fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:02.0:   bridge window [mem 0xef000000-0xf00fffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:03.0:   bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.3:   bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:00.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.4: PCI bridge to [bus 07-3f]
pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.4:   bridge window [mem 0xd8000000-0xee0fffff]
pci 0000:00:1c.4:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
pci 0000:81:00.0: PCI bridge to [bus 82]
pci 0000:81:00.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:80:01.0: PCI bridge to [bus 81-82]
pci 0000:80:01.0:   bridge window [mem 0xfbb00000-0xfbcfffff]
pci 0000:80:02.0: PCI bridge to [bus 83]
pci 0000:80:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:80:02.0:   bridge window [mem 0xfb600000-0xfbafffff 64bit pref]
pci 0000:80:03.0: PCI bridge to [bus 84]
pci 0000:80:03.2: PCI bridge to [bus 85]
pci 0000:80:03.2:   bridge window [io  0xf000-0xffff]
pci 0000:80:03.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:14.0 [0x7b461000 - 0x7b470fff]
DMAR: Setting identity map for device 0000:00:1a.0 [0x7b461000 - 0x7b470fff]
DMAR: Setting identity map for device 0000:00:1d.0 [0x7b461000 - 0x7b470fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:ff:08.0 to group 0
iommu: Adding device 0000:ff:08.2 to group 0
iommu: Adding device 0000:ff:08.3 to group 0
iommu: Adding device 0000:ff:09.0 to group 1
iommu: Adding device 0000:ff:09.2 to group 1
iommu: Adding device 0000:ff:09.3 to group 1
iommu: Adding device 0000:ff:0b.0 to group 2
iommu: Adding device 0000:ff:0b.1 to group 2
iommu: Adding device 0000:ff:0b.2 to group 2
iommu: Adding device 0000:ff:0b.3 to group 2
iommu: Adding device 0000:ff:0c.0 to group 3
iommu: Adding device 0000:ff:0c.1 to group 3
iommu: Adding device 0000:ff:0c.2 to group 3
iommu: Adding device 0000:ff:0c.3 to group 3
iommu: Adding device 0000:ff:0c.4 to group 3
iommu: Adding device 0000:ff:0c.5 to group 3
iommu: Adding device 0000:ff:0c.6 to group 3
iommu: Adding device 0000:ff:0c.7 to group 3
iommu: Adding device 0000:ff:0d.0 to group 4
iommu: Adding device 0000:ff:0d.1 to group 4
iommu: Adding device 0000:ff:0d.2 to group 4
iommu: Adding device 0000:ff:0d.3 to group 4
iommu: Adding device 0000:ff:0f.0 to group 5
iommu: Adding device 0000:ff:0f.1 to group 5
iommu: Adding device 0000:ff:0f.2 to group 5
iommu: Adding device 0000:ff:0f.3 to group 5
iommu: Adding device 0000:ff:0f.4 to group 5
iommu: Adding device 0000:ff:0f.5 to group 5
iommu: Adding device 0000:ff:0f.6 to group 5
iommu: Adding device 0000:ff:10.0 to group 6
iommu: Adding device 0000:ff:10.1 to group 6
iommu: Adding device 0000:ff:10.5 to group 6
iommu: Adding device 0000:ff:10.6 to group 6
iommu: Adding device 0000:ff:10.7 to group 6
iommu: Adding device 0000:ff:12.0 to group 7
iommu: Adding device 0000:ff:12.1 to group 7
iommu: Adding device 0000:ff:12.4 to group 7
iommu: Adding device 0000:ff:12.5 to group 7
iommu: Adding device 0000:ff:13.0 to group 8
iommu: Adding device 0000:ff:13.1 to group 8
iommu: Adding device 0000:ff:13.2 to group 8
iommu: Adding device 0000:ff:13.3 to group 8
iommu: Adding device 0000:ff:13.6 to group 8
iommu: Adding device 0000:ff:13.7 to group 8
iommu: Adding device 0000:ff:14.0 to group 9
iommu: Adding device 0000:ff:14.1 to group 9
iommu: Adding device 0000:ff:14.2 to group 9
iommu: Adding device 0000:ff:14.3 to group 9
iommu: Adding device 0000:ff:14.4 to group 9
iommu: Adding device 0000:ff:14.5 to group 9
iommu: Adding device 0000:ff:14.6 to group 9
iommu: Adding device 0000:ff:14.7 to group 9
iommu: Adding device 0000:ff:16.0 to group 10
iommu: Adding device 0000:ff:16.1 to group 10
iommu: Adding device 0000:ff:16.2 to group 10
iommu: Adding device 0000:ff:16.3 to group 10
iommu: Adding device 0000:ff:16.6 to group 10
iommu: Adding device 0000:ff:16.7 to group 10
iommu: Adding device 0000:ff:17.0 to group 11
iommu: Adding device 0000:ff:17.1 to group 11
iommu: Adding device 0000:ff:17.2 to group 11
iommu: Adding device 0000:ff:17.3 to group 11
iommu: Adding device 0000:ff:17.4 to group 11
iommu: Adding device 0000:ff:17.5 to group 11
iommu: Adding device 0000:ff:17.6 to group 11
iommu: Adding device 0000:ff:17.7 to group 11
iommu: Adding device 0000:ff:1e.0 to group 12
iommu: Adding device 0000:ff:1e.1 to group 12
iommu: Adding device 0000:ff:1e.2 to group 12
iommu: Adding device 0000:ff:1e.3 to group 12
iommu: Adding device 0000:ff:1e.4 to group 12
iommu: Adding device 0000:ff:1f.0 to group 13
iommu: Adding device 0000:ff:1f.2 to group 13
iommu: Adding device 0000:7f:08.0 to group 14
iommu: Adding device 0000:7f:08.2 to group 14
iommu: Adding device 0000:7f:08.3 to group 14
iommu: Adding device 0000:7f:09.0 to group 15
iommu: Adding device 0000:7f:09.2 to group 15
iommu: Adding device 0000:7f:09.3 to group 15
iommu: Adding device 0000:7f:0b.0 to group 16
iommu: Adding device 0000:7f:0b.1 to group 16
iommu: Adding device 0000:7f:0b.2 to group 16
iommu: Adding device 0000:7f:0b.3 to group 16
iommu: Adding device 0000:7f:0c.0 to group 17
iommu: Adding device 0000:7f:0c.1 to group 17
iommu: Adding device 0000:7f:0c.2 to group 17
iommu: Adding device 0000:7f:0c.3 to group 17
iommu: Adding device 0000:7f:0c.4 to group 17
iommu: Adding device 0000:7f:0c.5 to group 17
iommu: Adding device 0000:7f:0c.6 to group 17
iommu: Adding device 0000:7f:0c.7 to group 17
iommu: Adding device 0000:7f:0d.0 to group 18
iommu: Adding device 0000:7f:0d.1 to group 18
iommu: Adding device 0000:7f:0d.2 to group 18
iommu: Adding device 0000:7f:0d.3 to group 18
iommu: Adding device 0000:7f:0f.0 to group 19
iommu: Adding device 0000:7f:0f.1 to group 19
iommu: Adding device 0000:7f:0f.2 to group 19
iommu: Adding device 0000:7f:0f.3 to group 19
iommu: Adding device 0000:7f:0f.4 to group 19
iommu: Adding device 0000:7f:0f.5 to group 19
iommu: Adding device 0000:7f:0f.6 to group 19
iommu: Adding device 0000:7f:10.0 to group 20
iommu: Adding device 0000:7f:10.1 to group 20
iommu: Adding device 0000:7f:10.5 to group 20
iommu: Adding device 0000:7f:10.6 to group 20
iommu: Adding device 0000:7f:10.7 to group 20
iommu: Adding device 0000:7f:12.0 to group 21
iommu: Adding device 0000:7f:12.1 to group 21
iommu: Adding device 0000:7f:12.4 to group 21
iommu: Adding device 0000:7f:12.5 to group 21
iommu: Adding device 0000:7f:13.0 to group 22
iommu: Adding device 0000:7f:13.1 to group 22
iommu: Adding device 0000:7f:13.2 to group 22
iommu: Adding device 0000:7f:13.3 to group 22
iommu: Adding device 0000:7f:13.6 to group 22
iommu: Adding device 0000:7f:13.7 to group 22
iommu: Adding device 0000:7f:14.0 to group 23
iommu: Adding device 0000:7f:14.1 to group 23
iommu: Adding device 0000:7f:14.2 to group 23
iommu: Adding device 0000:7f:14.3 to group 23
iommu: Adding device 0000:7f:14.4 to group 23
iommu: Adding device 0000:7f:14.5 to group 23
iommu: Adding device 0000:7f:14.6 to group 23
iommu: Adding device 0000:7f:14.7 to group 23
iommu: Adding device 0000:7f:16.0 to group 24
iommu: Adding device 0000:7f:16.1 to group 24
iommu: Adding device 0000:7f:16.2 to group 24
iommu: Adding device 0000:7f:16.3 to group 24
iommu: Adding device 0000:7f:16.6 to group 24
iommu: Adding device 0000:7f:16.7 to group 24
iommu: Adding device 0000:7f:17.0 to group 25
iommu: Adding device 0000:7f:17.1 to group 25
iommu: Adding device 0000:7f:17.2 to group 25
iommu: Adding device 0000:7f:17.3 to group 25
iommu: Adding device 0000:7f:17.4 to group 25
iommu: Adding device 0000:7f:17.5 to group 25
iommu: Adding device 0000:7f:17.6 to group 25
iommu: Adding device 0000:7f:17.7 to group 25
iommu: Adding device 0000:7f:1e.0 to group 26
iommu: Adding device 0000:7f:1e.1 to group 26
iommu: Adding device 0000:7f:1e.2 to group 26
iommu: Adding device 0000:7f:1e.3 to group 26
iommu: Adding device 0000:7f:1e.4 to group 26
iommu: Adding device 0000:7f:1f.0 to group 27
iommu: Adding device 0000:7f:1f.2 to group 27
iommu: Adding device 0000:00:00.0 to group 28
iommu: Adding device 0000:00:01.0 to group 29
iommu: Adding device 0000:00:02.0 to group 30
iommu: Adding device 0000:00:03.0 to group 31
iommu: Adding device 0000:00:04.0 to group 32
iommu: Adding device 0000:00:04.1 to group 32
iommu: Adding device 0000:00:04.2 to group 32
iommu: Adding device 0000:00:04.3 to group 32
iommu: Adding device 0000:00:04.4 to group 32
iommu: Adding device 0000:00:04.5 to group 32
iommu: Adding device 0000:00:04.6 to group 32
iommu: Adding device 0000:00:04.7 to group 32
iommu: Adding device 0000:00:05.0 to group 33
iommu: Adding device 0000:00:05.1 to group 33
iommu: Adding device 0000:00:05.2 to group 33
iommu: Adding device 0000:00:05.4 to group 33
iommu: Adding device 0000:00:11.0 to group 34
iommu: Adding device 0000:00:11.4 to group 34
iommu: Adding device 0000:00:14.0 to group 35
iommu: Adding device 0000:00:1a.0 to group 36
iommu: Adding device 0000:00:1b.0 to group 37
iommu: Adding device 0000:00:1c.0 to group 38
iommu: Adding device 0000:00:1c.2 to group 39
iommu: Adding device 0000:00:1c.3 to group 40
iommu: Adding device 0000:00:1c.4 to group 41
iommu: Adding device 0000:00:1d.0 to group 42
iommu: Adding device 0000:00:1f.0 to group 43
iommu: Adding device 0000:00:1f.2 to group 43
iommu: Adding device 0000:00:1f.3 to group 43
iommu: Adding device 0000:01:00.0 to group 44
iommu: Adding device 0000:02:00.0 to group 45
iommu: Adding device 0000:02:00.1 to group 45
iommu: Adding device 0000:03:00.0 to group 46
iommu: Adding device 0000:05:00.0 to group 47
iommu: Adding device 0000:06:00.0 to group 48
iommu: Adding device 0000:07:00.0 to group 49
iommu: Adding device 0000:08:04.0 to group 49
iommu: Adding device 0000:80:01.0 to group 50
iommu: Adding device 0000:80:02.0 to group 51
iommu: Adding device 0000:80:03.0 to group 52
iommu: Adding device 0000:80:03.2 to group 53
iommu: Adding device 0000:80:04.0 to group 54
iommu: Adding device 0000:80:04.1 to group 54
iommu: Adding device 0000:80:04.2 to group 54
iommu: Adding device 0000:80:04.3 to group 54
iommu: Adding device 0000:80:04.4 to group 54
iommu: Adding device 0000:80:04.5 to group 54
iommu: Adding device 0000:80:04.6 to group 54
iommu: Adding device 0000:80:04.7 to group 54
iommu: Adding device 0000:80:05.0 to group 55
iommu: Adding device 0000:80:05.1 to group 55
iommu: Adding device 0000:80:05.2 to group 55
iommu: Adding device 0000:80:05.4 to group 55
iommu: Adding device 0000:81:00.0 to group 56
iommu: Adding device 0000:82:00.0 to group 56
iommu: Adding device 0000:83:00.0 to group 57
iommu: Adding device 0000:83:00.1 to group 58
iommu: Adding device 0000:85:00.0 to group 59
Intel CQM monitoring enabled
Intel MBM enabled
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1494165436.290:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=56 max_order=26 bucket_order=0
Installing knfsd (copyright (C) 1996 [e-mail]).
ntfs: driver 2.1.32 [Flags: R/O].
fuse init (API version 7.26)
SGI XFS with security attributes, no debug enabled
NET: Registered protocol family 38
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:02.0: Signaling PME with IRQ 27
pcieport 0000:00:03.0: Signaling PME with IRQ 29
pcieport 0000:00:1c.0: Signaling PME with IRQ 30
pcieport 0000:00:1c.2: Signaling PME with IRQ 31
pcieport 0000:00:1c.3: Signaling PME with IRQ 32
pcieport 0000:00:1c.4: Signaling PME with IRQ 33
pcieport 0000:80:01.0: Signaling PME with IRQ 35
pcieport 0000:80:02.0: Signaling PME with IRQ 37
pcieport 0000:80:03.0: Signaling PME with IRQ 39
pcieport 0000:80:03.2: Signaling PME with IRQ 40
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
console [ttyS0] disabled
0000:85:00.0: ttyS0 at I/O 0xf000 (irq = 41, base_baud = 115200) is a ST16650V2
tsc: Refined TSC clocksource calibration: 2999.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e44b2357, max_idle_ns: 440795324996 ns
clocksource: Switched to clocksource tsc
console [ttyS0] enabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
zram: Added device: zram0
megasas: 07.701.17.00-rc1
megaraid_sas 0000:03:00.0: FW now in Ready state
megaraid_sas 0000:03:00.0: firmware supports msix	: (16)
megaraid_sas 0000:03:00.0: current msix/online cpus	: (16/48)
megaraid_sas 0000:03:00.0: RDPQ mode	: (disabled)
megaraid_sas 0000:03:00.0: Current firmware maximum commands: 1008	 LDIO threshold: 0
megaraid_sas 0000:03:00.0: FW supports sync cache	: No
megaraid_sas 0000:03:00.0: Init cmd success
megaraid_sas 0000:03:00.0: firmware type	: Legacy(64 VD) firmware
megaraid_sas 0000:03:00.0: controller type	: MR(1024MB)
megaraid_sas 0000:03:00.0: Online Controller Reset(OCR)	: Enabled
megaraid_sas 0000:03:00.0: Secure JBOD support	: No
megaraid_sas 0000:03:00.0: INIT adapter done
megaraid_sas 0000:03:00.0: Jbod map is not supported megasas_setup_jbod_map 5092
megaraid_sas 0000:03:00.0: pci id		: (0x1000)/(0x005b)/(0x1000)/(0x9271)
megaraid_sas 0000:03:00.0: unevenspan support	: no
megaraid_sas 0000:03:00.0: firmware crash dump	: no
megaraid_sas 0000:03:00.0: jbod sync map		: no
scsi host0: Avago SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access     LSI      MR9271-8i        3.44 PQ: 0 ANSI: 5
random: fast init done
mpt3sas version 15.100.00.00 loaded
mpt3sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (264079232 kB)
mpt3sas_cm0: MSI-X vectors supported: 96, no of cores: 48, max_msix_vectors: -1
mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 80
mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 81
mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 82
mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 83
mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 84
mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 85
mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 86
mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 87
mpt3sas0-msix8: PCI-MSI-X enabled: IRQ 88
mpt3sas0-msix9: PCI-MSI-X enabled: IRQ 89
mpt3sas0-msix10: PCI-MSI-X enabled: IRQ 90
mpt3sas0-msix11: PCI-MSI-X enabled: IRQ 91
mpt3sas0-msix12: PCI-MSI-X enabled: IRQ 92
mpt3sas0-msix13: PCI-MSI-X enabled: IRQ 93
mpt3sas0-msix14: PCI-MSI-X enabled: IRQ 94
mpt3sas0-msix15: PCI-MSI-X enabled: IRQ 95
mpt3sas0-msix16: PCI-MSI-X enabled: IRQ 96
mpt3sas0-msix17: PCI-MSI-X enabled: IRQ 97
mpt3sas0-msix18: PCI-MSI-X enabled: IRQ 98
mpt3sas0-msix19: PCI-MSI-X enabled: IRQ 99
mpt3sas0-msix20: PCI-MSI-X enabled: IRQ 100
mpt3sas0-msix21: PCI-MSI-X enabled: IRQ 101
mpt3sas0-msix22: PCI-MSI-X enabled: IRQ 102
mpt3sas0-msix23: PCI-MSI-X enabled: IRQ 103
mpt3sas0-msix24: PCI-MSI-X enabled: IRQ 104
mpt3sas0-msix25: PCI-MSI-X enabled: IRQ 105
mpt3sas0-msix26: PCI-MSI-X enabled: IRQ 106
mpt3sas0-msix27: PCI-MSI-X enabled: IRQ 107
mpt3sas0-msix28: PCI-MSI-X enabled: IRQ 108
mpt3sas0-msix29: PCI-MSI-X enabled: IRQ 109
mpt3sas0-msix30: PCI-MSI-X enabled: IRQ 110
mpt3sas0-msix31: PCI-MSI-X enabled: IRQ 111
mpt3sas0-msix32: PCI-MSI-X enabled: IRQ 112
mpt3sas0-msix33: PCI-MSI-X enabled: IRQ 113
mpt3sas0-msix34: PCI-MSI-X enabled: IRQ 114
mpt3sas0-msix35: PCI-MSI-X enabled: IRQ 115
mpt3sas0-msix36: PCI-MSI-X enabled: IRQ 116
mpt3sas0-msix37: PCI-MSI-X enabled: IRQ 117
mpt3sas0-msix38: PCI-MSI-X enabled: IRQ 118
mpt3sas0-msix39: PCI-MSI-X enabled: IRQ 119
mpt3sas0-msix40: PCI-MSI-X enabled: IRQ 120
mpt3sas0-msix41: PCI-MSI-X enabled: IRQ 121
mpt3sas0-msix42: PCI-MSI-X enabled: IRQ 122
mpt3sas0-msix43: PCI-MSI-X enabled: IRQ 123
mpt3sas0-msix44: PCI-MSI-X enabled: IRQ 124
mpt3sas0-msix45: PCI-MSI-X enabled: IRQ 125
mpt3sas0-msix46: PCI-MSI-X enabled: IRQ 126
mpt3sas0-msix47: PCI-MSI-X enabled: IRQ 127
mpt3sas_cm0: iomem(0x00000000f0240000), mapped(0xffffc9001c170000), size(65536)
mpt3sas_cm0: ioport(0x0000000000006000), size(256)
mpt3sas_cm0: sending diag reset !!
mpt3sas_cm0: diag reset: SUCCESS
mpt3sas_cm0: Allocated physical memory: size(10507 kB)
mpt3sas_cm0: Current Controller Queue Depth(2936),Max Controller Queue Depth(3072)
mpt3sas_cm0: Scatter Gather Elements per IO(128)
mpt3sas_cm0: LSISAS3008: FWVersion(10.00.03.00), ChipRevision(0x02), BiosVersion(08.25.00.00)
mpt3sas_cm0: Protocol=(
Initiator
), 
Capabilities=(
Raid
,TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host1: Fusion MPT SAS Host
mpt3sas_cm0: sending port enable !!
mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x500304801cdc1900), phys(8)
mpt3sas_cm0: port enable: SUCCESS
scsi 1:0:0:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:0:0: SATA: handle(0x000d), sas_addr(0x4433221104000000), phy(4), device_name(0x5000cca24dc42152)
scsi 1:0:0:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(4)
scsi 1:0:0:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:1:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221100000000), phy(0), device_name(0x5000cca24dc9b20a)
scsi 1:0:1:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(0)
scsi 1:0:1:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:2:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221101000000), phy(1), device_name(0x5000cca24dc46b65)
scsi 1:0:2:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(1)
scsi 1:0:2:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:3:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:3:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x5000cca242d8541b)
scsi 1:0:3:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(2)
scsi 1:0:3:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:4:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:4:0: SATA: handle(0x000c), sas_addr(0x4433221103000000), phy(3), device_name(0x5000cca24dca2e41)
scsi 1:0:4:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(3)
scsi 1:0:4:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:5:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:5:0: SATA: handle(0x000e), sas_addr(0x4433221105000000), phy(5), device_name(0x5000cca242d850a8)
scsi 1:0:5:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(5)
scsi 1:0:5:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:6:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:6:0: SATA: handle(0x000f), sas_addr(0x4433221106000000), phy(6), device_name(0x5000cca24dc46aaf)
scsi 1:0:6:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(6)
scsi 1:0:6:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 1:0:7:0: Direct-Access     ATA      HGST HDN726060AL T517 PQ: 0 ANSI: 6
scsi 1:0:7:0: SATA: handle(0x0010), sas_addr(0x4433221107000000), phy(7), device_name(0x5000cca242cff2bc)
scsi 1:0:7:0: SATA: enclosure_logical_id(0x500304801cdc1900), slot(7)
scsi 1:0:7:0: SATA: enclosure level(0x0000), connector name(     )
scsi 1:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
sd 0:2:0:0: [sda] 3992453120 512-byte logical blocks: (2.04 TB/1.86 TiB)
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:1:0: Attached scsi generic sg2 type 0
sd 1:0:2:0: Attached scsi generic sg3 type 0
sd 1:0:3:0: Attached scsi generic sg4 type 0
sd 1:0:4:0: Attached scsi generic sg5 type 0
sd 1:0:5:0: Attached scsi generic sg6 type 0
sd 1:0:6:0: Attached scsi generic sg7 type 0
sd 1:0:7:0: Attached scsi generic sg8 type 0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst 
sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:1:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:1:0: [sdc] 4096-byte physical blocks
sd 1:0:2:0: [sdd] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:2:0: [sdd] 4096-byte physical blocks
sd 1:0:3:0: [sde] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:3:0: [sde] 4096-byte physical blocks
sd 1:0:4:0: [sdf] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:4:0: [sdf] 4096-byte physical blocks
sd 1:0:5:0: [sdg] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:5:0: [sdg] 4096-byte physical blocks
sd 1:0:6:0: [sdh] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:6:0: [sdh] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:2:0: [sdd] Write Protect is off
sd 1:0:3:0: [sde] Write Protect is off
sd 1:0:4:0: [sdf] Write Protect is off
sd 1:0:5:0: [sdg] Write Protect is off
sd 1:0:6:0: [sdh] Write Protect is off
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:2:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:3:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:4:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
sd 1:0:5:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 128
ata2: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c180 irq 128
ata3: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c200 irq 128
ata4: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c280 irq 128
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
sd 1:0:6:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 1:0:7:0: [sdi] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 1:0:7:0: [sdi] 4096-byte physical blocks
sd 1:0:7:0: [sdi] Write Protect is off
sd 1:0:7:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
ata5: SATA max UDMA/133 abar m2048@0xf0636000 port 0xf0636100 irq 129
ata6: SATA max UDMA/133 abar m2048@0xf0636000 port 0xf0636180 irq 129
ata7: SATA max UDMA/133 abar m2048@0xf0636000 port 0xf0636200 irq 129
ata8: SATA max UDMA/133 abar m2048@0xf0636000 port 0xf0636280 irq 129
ata9: SATA max UDMA/133 abar m2048@0xf0636000 port 0xf0636300 irq 129
ata10: SATA max UDMA/133 abar m2048@0xf0636000 port 0xf0636380 irq 129
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
 sdg: sdg1
 sdc: sdc1
 sdh: sdh1
 sde: sde1
 sdf: sdf1
sd 1:0:5:0: [sdg] Attached SCSI disk
 sdb: sdb1
 sdd: sdd1
 sdi: sdi1
sd 1:0:1:0: [sdc] Attached SCSI disk
sd 1:0:3:0: [sde] Attached SCSI disk
sd 1:0:6:0: [sdh] Attached SCSI disk
sd 1:0:4:0: [sdf] Attached SCSI disk
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:2:0: [sdd] Attached SCSI disk
sd 1:0:7:0: [sdi] Attached SCSI disk
igb 0000:05:00.0: DCA enabled
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:aa:21:10
igb 0000:05:00.0: eth0: PBA No: 013000-000
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5.00: ATAPI: HL-DT-ST BD-RE  WH14NS40, 1.02, max UDMA/100
ata5.00: configured for UDMA/100
scsi 6:0:0:0: CD-ROM            HL-DT-ST BD-RE  WH14NS40  1.02 PQ: 0 ANSI: 5
sr 6:0:0:0: [sr0] scsi3-mmc drive: 24x/16x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi generic sg9 type 5
igb 0000:06:00.0: DCA enabled
pps pps1: new PPS source ptp1
igb 0000:06:00.0: added PHC on eth1
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:aa:21:11
igb 0000:06:00.0: eth1: PBA No: 011000-000
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
random: crng init done
 sda: sda1 sda2 sda3 sda4
sd 0:2:0:0: [sda] Attached SCSI disk
ixgbe 0000:83:00.0: Multiqueue Enabled: Rx Queue count = 48, Tx Queue count = 48
ixgbe 0000:83:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:83:00.0: (Speed:8.0GT/s, Width: x4, Encoding Loss:<2%)
ixgbe 0000:83:00.0: MAC: 4, PHY: 0, PBA No: H86377-005
ixgbe 0000:83:00.0: a0:36:9f:d9:b4:80
ixgbe 0000:83:00.0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:83:00.1: Multiqueue Enabled: Rx Queue count = 48, Tx Queue count = 48
ixgbe 0000:83:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:83:00.1: (Speed:8.0GT/s, Width: x4, Encoding Loss:<2%)
ixgbe 0000:83:00.1: MAC: 4, PHY: 0, PBA No: H86377-005
ixgbe 0000:83:00.1: a0:36:9f:d9:b4:81
ixgbe 0000:83:00.1: Intel(R) 10 Gigabit Network Connection
ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 3.2.2-k
ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
firewire_ohci 0000:82:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 18, io mem 0xf0638000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.0-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 18, io mem 0xf0637000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.0-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.0-gentoo xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.0-gentoo xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (INTERRUPT)
EDAC sbridge:  Ver: 1.1.1 
intel_pstate: Intel P-state driver initializing
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
firewire_core 0000:82:00.0: created device fw0: GUID 0001b71300000243, S800
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: New USB device found, idVendor=051d, idProduct=0002
usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-1: Product: Smart-UPS 1000 XL FW:631.3.D USB FW:1.5
usb 3-1: Manufacturer: American Power Conversion
usb 3-1: SerialNumber: AS0544133023
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: New USB device found, idVendor=05e3, idProduct=0612
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: USB3.0 Hub
usb 4-5: Manufacturer: GenesysLogic
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usbcore: registered new interface driver snd-usb-audio
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy <[e-mail]>
nf_tables_compat: (c) 2012 Pablo Neira Ayuso <[e-mail]>
xt_time: kernel timezone is -0000
ip_set: protocol 6
ipip: IPv4 and MPLS over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: arp_tables: (C) 2002 David S. Miller
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x406f1, pf=0x1, revision=0xb00001f
microcode: Microcode Update Driver: v2.2.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
rtc_cmos 00:00: setting system clock to 2017-05-07 13:57:34 UTC (1494165454)
ALSA device list:
  #0: Asus Virtuoso 100 at 0x1000, irq 16
hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Smart-UPS 1000 XL FW:631.3.D USB FW:1.5] on usb-0000:00:14.0-1/input0
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sdg1
md: sdg1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdh1
md: sdh1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdc1
md: sdc1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sde1
md: sde1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdf1
md: sdf1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdb1
md: sdb1 does not have a valid v0.90 superblock, not importing!
md: invalid raid superblock magic on sdd1
md: sdd1 does not have a valid v0.90 superblock, not importing!
usb 3-2: new high-speed USB device number 3 using xhci_hcd
md: invalid raid superblock magic on sdi1
md: sdi1 does not have a valid v0.90 superblock, not importing!
md: autorun ...
md: ... autorun DONE.
XFS (sda4): Mounting V5 Filesystem
XFS (sda4): Ending clean mount
VFS: Mounted root (xfs filesystem) readonly on device 8:4.
devtmpfs: mounted
Freeing unused kernel memory: 1436K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 1620K
Freeing unused kernel memory: 180K