dmesg output: 2.6.9-gentoo-r4, functional DMA on blacklisted chipset

DSD.TXT (text/plain), 19.07 KB, created by Bob on 2004-11-17 23:42:10 UTC

Linux version 2.6.9-gentoo-r4 (root@gentoo) (gcc version 3.4.3 (Gentoo Linux 3.4.3, ssp-3.4.3-0, pie-8.7.6.6)) #7 SMP Wed Nov 17 12:40:21 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000feae000 (usable)
 BIOS-e820: 000000000feae000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
254MB LOWMEM available.
On node 0 totalpages: 65198
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61102 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL                                  ) @ 0x000fd790
ACPI: RSDT (v001 DELL    GX110   0x00000007 ASL  0x00000061) @ 0x000fd7a4
ACPI: FADT (v001 DELL    GX110   0x00000007 ASL  0x00000061) @ 0x000fd7cc
ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000
Built 1 zonelists
Kernel command line: ro root=/dev/hda4 video=vesafb:ywrap,pmipal,1024x768-32@85 splash=verbose,theme:emergence
fbsplash: verbose
fbsplash: theme emergence
No local APIC present or hardware disabled
Initializing CPU#0
CPU 0 irqstacks, hard=c051d000 soft=c0515000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 797.403 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 252656k/260792k available (2878k kernel code, 7588k reserved, 1054k data, 220k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1572.86 BogoMIPS (lpj=786432)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps:        0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.12 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 587k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
audit: initializing netlink socket (disabled)
audit(1100761192.422:0): initialized
NTFS driver 2.1.20 [Flags: R/W DEBUG].
inotify init: minor=63
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i810 E Chipset.
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xf4000000
vesafb: Matrox, MISTRAL, 00 (OEM: Matrox Graphics Inc.)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:7e00
vesafb: pmi: set display start = c00c7e3b, set palette = c00c7e99
vesafb: pmi: ports = 3de 3df 
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1024
Console: switching to colour frame buffer device 128x48
fbsplash: console 0 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xf8000000, mapped to 0xd0980000, size 4096k
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Logitech Mouse on isa0060/serio1
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:0c.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 0000:00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DV-5800A, ATAPI CD/DVD-ROM drive
hdd: ATAPI CD-RW 48X24, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(66)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
libata version 1.02 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1f.2: Intel Corp. 82801AA USB
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 11, io base 0000ff80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49320 usecs
intel8x0: clocking to 48000
usb 1-1: new full speed USB device using address 2
ALSA device list:
  #0: Intel 82801AA-ICH at 0xd800, irq 10
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ip_conntrack version 2.1 (2037 buckets, 16296 max) - 304 bytes per conntrack
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[e-mail]>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices: 
PCI0 USB0 PCI1  KBD 
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: replayed 5 transactions in 0 seconds
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 220k freed
Adding 506036k swap on /dev/hda3.  Priority:-1 extents:1
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
Buffer I/O error on device fd0, logical block 3
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 12
Buffer I/O error on device fd0, logical block 12
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
Buffer I/O error on device fd0, logical block 23
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 802
Buffer I/O error on device fd0, logical block 802
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 803
Buffer I/O error on device fd0, logical block 803
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 804
Buffer I/O error on device fd0, logical block 804
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 805
Buffer I/O error on device fd0, logical block 805
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 806
Buffer I/O error on device fd0, logical block 806
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 807
Buffer I/O error on device fd0, logical block 807
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 808
Buffer I/O error on device fd0, logical block 808
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 809
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 810
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 811
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 812
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 813
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 814
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 815
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 816
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 817
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 818
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 819
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 820
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 821
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 3
FAT: bread(block 3) in fat_access failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
printk: 13 messages suppressed.
Buffer I/O error on device fd0, logical block 24
lost page write due to I/O error on fd0
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
FAT: Directory bread(block 24) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
FAT: Directory bread(block 24) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
FAT: Directory bread(block 24) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: unable to read inode block for updating (i_pos 371)
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
FAT: unable to read inode block for updating (i_pos 384)
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
FAT: Directory bread(block 24) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 23
FAT: Directory bread(block 23) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
FAT: Directory bread(block 24) failed
floppy0: disk absent or changed during operation
end_request: I/O error, dev fd0, sector 24
FAT: unable to read inode block for updating (i_pos 384)