dmesg output for kernel 2.6.9-r3

dmesg.txt (text/plain), 9.52 KB, created by Bob on 2004-11-10 23:00:35 UTC

Linux version 2.6.9-gentoo-r3 (root@livecd) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #1 Tue Nov 9 01:44:22 CST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000feae000 (usable)
 BIOS-e820: 000000000feae000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
254MB LOWMEM available.
On node 0 totalpages: 65198
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61102 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL                                  ) @ 0x000fd790
ACPI: RSDT (v001 DELL    GX110   0x00000007 ASL  0x00000061) @ 0x000fd7a4
ACPI: FADT (v001 DELL    GX110   0x00000007 ASL  0x00000061) @ 0x000fd7cc
ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: ro root=/dev/hda4 video=vesafb:ywrap,pmipal,1024x768-32@85
No local APIC present or hardware disabled
Initializing CPU#0
CPU 0 irqstacks, hard=c04cc000 soft=c04cb000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 797.403 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 253284k/260792k available (2669k kernel code, 6960k reserved, 987k data, 200k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1581.05 BogoMIPS (lpj=790528)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps:        0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs... it is
Freeing initrd memory: 587k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
TC classifier action (bugs to [e-mail] cc [e-mail])
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
IA-32 Microcode Update Driver: v1.14 <[e-mail]>
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
inotify init: minor=63
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i810 E Chipset.
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xf4000000
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 5 (level, low) -> IRQ 5
matroxfb: Matrox Millennium II (PCI) detected
matroxfb: MTRR's turned on
matroxfb: 640x480x8bpp (virtual: 640x13081)
matroxfb: framebuffer at 0xF8000000, mapped to 0xd0980000, size 8388608
Console: switching to colour frame buffer device 80x30
fb0: MATROX frame buffer device
vesafb: Matrox, MISTRAL, 00 (OEM: Matrox Graphics Inc.)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:7e00
vesafb: pmi: set display start = c00c7e3b, set palette = c00c7e99
vesafb: pmi: ports = 3de 3df 
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1024
vesafb: cannot reserve video memory at 0xf8000000
vesafb: framebuffer at 0xf8000000, mapped to 0xd1a00000, size 4096k
fb1: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 9 (level, low) -> IRQ 9
I810FB: fb2         : Intel(R) 810E Framebuffer Device v0.9.0
I810FB: Video RAM   : 4096K
I810FB: Monitor     : H: 29-30 KHz V: 60-60 Hz
I810FB: Mode        : 640x480-8bpp@60Hz
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Logitech Mouse on isa0060/serio1
input: PC Speaker
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ub: sizeof ub_scsi_cmd 60 ub_dev 924
usbcore: registered new driver ub
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:0c.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: Maxtor 6Y080P0, ATA DISK drive
Probing IDE interface ide1...
hdc: ATAPI CD-RW 48X24, ATAPI CD/DVD-ROM drive
hdd: _NEC DV-5800A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
ide-floppy driver 0.99.newide
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1f.2: Intel Corp. 82801AA USB
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 11, io base 0000ff80
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
I2O Core - (C) Copyright 1999 Red Hat Software
i2o: max_drivers=4
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
usb 1-1: new full speed USB device using address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 200k freed
spurious 8259A interrupt: IRQ7.
Adding 506036k swap on /dev/hda3.  Priority:-1 extents:1
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
Disabled Privacy Extensions on device c0449a80(lo)
evdev: disagrees about version of symbol struct_module
evdev: disagrees about version of symbol struct_module
evdev: disagrees about version of symbol struct_module
eth0: no IPv6 routers present