net-dialup/fcdsl-2.6.20.7.ebuild

fcdsl-2.6.20.7.ebuild (text/plain), 6.98 KB, created by tuXXer on 2004-09-27 16:29:44 UTC

# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $

inherit kmod rpm eutils

S="${WORKDIR}/fritz"

DESCRIPTION="AVM FRITZ!Card DSL drivers for 2.6 kernel"
HOMEPAGE="http://www.avm.de/"
SRC_URI="ftp://ftp.suse.com/pub/suse/i386/update/9.1/rpm/src/avm_${P/2.6./2.6-}.src.rpm"

LICENSE="LGPL-2"
SLOT="${KV}"
KEYWORDS="x86"
IUSE=""

RDEPEND=">=net-dialup/capi4k-utils-20040810
	net-dialup/ppp"
DEPEND="${RDEPEND}
	app-arch/rpm2targz
	sys-apps/gawk
	sys-apps/sed
	sys-kernel/config-kernel
	virtual/linux-sources"

detect_fcdsl_card() {

	FCDSL_NAMES=("AVM FRITZ!Card DSL" "AVM FRITZ!Card DSL v2.0" "AVM FRITZ!Card DSL SL" "AVM FRITZ!Card DSL USB" "AVM FRITZ!Card DSL SL USB")
	FCDSL_BUSTYPES=("pci" "pci" "pci" "usb" "usb")
	FCDSL_IDS=("1131:5402" "1244:2900" "1244:2700" "057c:2300" "057c:3500")
	FCDSL_FIRMWARES=("fdslbase.bin" "fds2base.bin" "fdssbase.bin" "fdsubase.frm" "fdlubase.frm")
	FCDSL_MODULES=("fcdsl" "fcdsl2" "fcdslsl" "fcdslusb" "fcdslslusb")
	FCDSL_SRCDIRS=("fritz.dsl" "fritz.dsl2" "fritz.dslsl" "fritz.dslusb" "fritz.dslslusb")

	PCI_IDS=""
	USB_IDS=""
	if [ -d /sys/bus ]; then
		if [ -d /sys/bus/pci/devices ]; then
			cd /sys/bus/pci/devices
			for PCI_DEVICE in *; do
				PCI_IDS="${PCI_IDS}$(cat ${PCI_DEVICE}/vendor | sed -e 's:0\x::'):$(cat ${PCI_DEVICE}/device | sed -e 's:0\x::') "
			done
			unset PCI_DEVICE
		fi
		if [ -d /sys/bus/usb/devices ]; then
			cd /sys/bus/usb/devices
			for USB_DEVICE in [0-9]*; do
				if [ -f ${USB_DEVICE}/idVendor ]; then
					USB_IDS="${USB_IDS}$(cat ${USB_DEVICE}/idVendor):$(cat ${USB_DEVICE}/idProduct) "
				fi
			done
			unset USB_DEVICE
		fi
	fi

	FCDSL_MODULE=""
	for ((CARD=0; CARD < ${#FCDSL_IDS[*]}; CARD++)); do
		BUS_IDS=""
		if [ "${FCDSL_BUSTYPES[CARD]}" == "pci" ]; then
			BUS_IDS="${PCI_IDS}"
		else
			BUS_IDS="${USB_IDS}"
		fi
		for BUS_ID in ${BUS_IDS}; do
			if [ "${BUS_ID}" == "${FCDSL_IDS[CARD]}" ]; then
				einfo "Found: ${FCDSL_NAMES[CARD]}"
				FCDSL_FIRMWARE=${FCDSL_FIRMWARES[CARD]}
				FCDSL_MODULE=${FCDSL_MODULES[CARD]}
				FCDSL_SRCDIR=${WORKDIR}/${FCDSL_SRCDIRS[CARD]}
			fi
		done
	done
	if [ "${FCDSL_MODULE}" == "" ]; then
		ewarn "No AVM FRITZ!Card DSL found!"
	fi

}

readpassword() {

	VALUE_1=""
	VALUE_2=""
	while true; do
		einfo "Enter your password:"
		read -r -s VALUE_1
		einfo "Retype your password:"
		read -r -s VALUE_2
		if [ "${VALUE_1}" == "" ]; then
			echo
			eerror "You entered a blank password. Please try again."
			echo
		else
			if [ "${VALUE_1}" == "${VALUE_2}" ] ; then
				break
			else
				echo
				eerror "Your password entries do not match. Please try again."
				echo
			fi
		fi
	done
	eval ${1}=${VALUE_1}

	VALUE_1=""
	VALUE_2=""
	unset VALUE_1
	unset VALUE_2

}

readvalue() {

	VALUE=""
	while true; do
		einfo "${2}:"
		read VALUE
		if [ "${VALUE}" == "" ]; then
			eerror "You entered a blank value. Please try again."
			echo
		else
			break
		fi
	done
	eval ${1}=${VALUE}

	VALUE=""
	unset VALUE

}

pkg_setup() {

	if is_kernel 2 6; then
		einfo "Found: 2.6 kernel"
	else
		die "This package works only with 2.6 kernel!"
 	fi

	if [ "$(kmod_get_config_var ISDN_CAPI_CAPI20 | tail -n 1)" == "n" ]; then
		ewarn "For using the driver you need a kernel with enabled CAPI support."
	fi

	detect_fcdsl_card

}

src_unpack() {

	rpm_src_unpack ${DISTDIR}/${A} || die "Could not unpack RPM package."

}

src_compile() {

	if [ "${FCDSL_MODULE}" == "" ]; then
		for ((CARD=0; CARD < ${#FCDSL_IDS[*]}; CARD++)); do
			einfo "Compiling driver for ${FCDSL_NAMES[CARD]}"
			cd ${WORKDIR}/${FCDSL_SRCDIRS[CARD]}/src || die "Could not change to ${FCDSL_NAMES[CARD]} source directory."
			kmod_src_compile || die "Could not compile driver for ${FCDSL_NAMES[CARD]}."
		done
	else
		cd ${FCDSL_SRCDIR}/src || die "Could not change to driver source directory."
		kmod_src_compile || die "Could not compile driver."
	fi

}

src_install() {

	dodir /etc/drdsl /etc/modules.d /lib/modules/${KV_VERSION_FULL}/misc /usr/lib/isdn /usr/sbin

	echo -e "# card\tfile\tproto\tio\tirq\tmem\tcardnr\toptions" >${D}/etc/capi.conf
	echo "#" >>${D}/etc/capi.conf
	
	echo "# Options for AVM FRITZ!Card DSL cards" >${D}/etc/modules.d/fcdsl
	echo "# Correct these settings with the output from drdsl -n" >>${D}/etc/modules.d/fcdsl

	if [ "${FCDSL_MODULE}" == "" ]; then
		for ((CARD=0; CARD < ${#FCDSL_IDS[*]}; CARD++)); do
			echo -e "#${FCDSL_MODULES[CARD]}\t${FCDSL_FIRMWARES[CARD]}\t-\t-\t-\t-\t-" >>${D}/etc/capi.conf
		
			echo "#options ${FCDSL_MODULES[CARD]} VPI=1 VCI=32 VCC=1" >>${D}/etc/modules.d/fcdsl
			
			insinto /usr/lib/isdn
			doins ${WORKDIR}/${FCDSL_SRCDIRS[CARD]}/${FCDSL_FIRMWARES[CARD]}
			
			insinto /lib/modules/${KV_VERSION_FULL}/misc
			doins ${WORKDIR}/${FCDSL_SRCDIRS[CARD]}/src/${FCDSL_MODULES[CARD]}.${KV_OBJ}
		done
	else
		echo -e "${FCDSL_MODULE}\t${FCDSL_FIRMWARE}\t-\t-\t-\t-\t-" >>${D}/etc/capi.conf
		
		echo "#options ${FCDSL_MODULE} VPI=1 VCI=32 VCC=1" >>${D}/etc/modules.d/fcdsl
		
		insinto /usr/lib/isdn
		doins ${FCDSL_SRCDIR}/${FCDSL_FIRMWARE}

		insinto /lib/modules/${KV_VERSION_FULL}/misc
		doins ${FCDSL_SRCDIR}/src/${FCDSL_MODULE}.${KV_OBJ}
	fi

	insinto /etc/drdsl
	doins ${S}/drdsl.ini

	exeinto /usr/sbin
	doexe ${S}/drdsl

	dodoc ${S}/CAPI* ${S}/compile* ${S}/license.txt ${S}/release.txt
	dohtml install_passive-*.html

}

pkg_postinst() {

	einfo "To complete the installation you have to modify the file"
	einfo "    /etc/modules.d/fcdsl"
	einfo "with the options drdsl will give you."
	echo
	einfo "Please enter following commands:"
	einfo "    depmod -ae"
	einfo "    capiinit start"
	einfo "    drdsl -n"
	einfo "    nano /etc/modules.d/fcdsl (=> enter the values)"
	einfo "    update-modules"
	echo
	einfo "If you want to create a peer file, please run:"
	einfo "    ebuild /var/db/pkg/net-dialup/${PF}/${PF}.ebuild config"
	sleep 10

}

pkg_config() {

	detect_fcdsl_card

	if [ "${FCDSL_MODULE}" != "" ]; then
		readvalue FCDSL_PROVIDER "Enter the name of your ISP"
		if [ ! -e "/etc/ppp/peers/${FCDSL_PROVIDER}" ]; then
			readvalue FCDSL_USER "Enter your user name"
			if [ "$(grep "${FCDSL_USER}" /etc/ppp/pap-secrets)" == "" ]; then
				readpassword FCDSL_PASSWORD	
				echo '"'${FCDSL_USER}'" * "'${FCDSL_PASSWORD}'"' >>/etc/ppp/pap-secrets
				unset FCDSL_PASSWORD
				cat <<EOF >>/etc/ppp/peers/${FCDSL_PROVIDER}
connect ""
ipcp-accept-remote
ipcp-accept-local
usepeerdns
defaultroute
user "${FCDSL_USER}"
hide-password
sync
noauth
lcp-echo-interval 5
lcp-echo-failure 3
lcp-max-configure 50
lcp-max-terminate 2
noccp
noipx
noproxyarp
mru 1492
mtu 1492
linkname "${FCDSL_PROVIDER}"
ipparam internet
plugin capiplugin.so
avmadsl
:
/dev/null
EOF
				echo
				echo
				echo
				einfo "Now, you can start an ADSL connection with either"
				einfo "    pon \"${FCDSL_PROVIDER}\""
				einfo "or"
				einfo "    pppd call \"${FCDSL_PROVIDER}\""
			else
				ewarn "User \"${FCDSL_USER}\" always exists in \"/etc/ppp/pap-secrets\"!"
			fi
		else
			ewarn "Peer file \"/etc/ppp/peers/${FCDSL_PROVIDER}\" always exists!"
		fi
	else
		ewarn "No AVM FRITZ!Card DSL found!"
	fi	
	unset FCDSL_PROVIDER
	unset FCDSL_USER

}