Output of pwmconfig with -x set

pwmconfig.out (text/plain), 28.19 KB, created by Dimitrios Semitsoglou-Tsiapos on 2014-07-08 14:29:17 UTC

Script started on Tue Jul  8 17:10:49 2014
++ echo '$Revision: 5857 $'
++ cut '-d ' -f2
+ REVISION=5857
++ echo '$Date: 2010-08-22 18:17:57 +0200 (dim. 22 août 2010) $'
++ cut '-d ' -f2
+ REVDATE=2010-08-22
+ PIDFILE=/var/run/fancontrol.pid
+ '[' -f /var/run/fancontrol.pid ']'
++ id -u
+ '[' 0 '!=' 0 ']'
+ echo '# pwmconfig revision 5857 (2010-08-22)'
# pwmconfig revision 5857 (2010-08-22)
+ echo 'This program will search your sensors for pulse width modulation (pwm)'
This program will search your sensors for pulse width modulation (pwm)
+ echo 'controls, and test each one to see if it controls a fan on'
controls, and test each one to see if it controls a fan on
+ echo 'your motherboard. Note that many motherboards do not have pwm'
your motherboard. Note that many motherboards do not have pwm
+ echo 'circuitry installed, even if your sensor chip supports pwm.'
circuitry installed, even if your sensor chip supports pwm.
+ echo

+ echo 'We will attempt to briefly stop each fan using the pwm controls.'
We will attempt to briefly stop each fan using the pwm controls.
+ echo 'The program will attempt to restore each fan to full speed'
The program will attempt to restore each fan to full speed
+ echo 'after testing. However, it is ** very important ** that you'
after testing. However, it is ** very important ** that you
+ echo 'physically verify that the fans have been to full speed'
physically verify that the fans have been to full speed
+ echo 'after the program has completed.'
after the program has completed.
+ echo

+ DELAY=5
+ MAX=255
+ '[' -d /sys/class/hwmon ']'
+ SYSFS=2
+ DIR=/sys/class/hwmon
+ PREFIX='hwmon*'
+ cd /sys/class/hwmon
++ echo hwmon0 hwmon1
+ DEVICES='hwmon0 hwmon1'
+ '[' 'hwmon*' = 'hwmon0 hwmon1' ']'
+ '[' 2 = 2 ']'
+ OLD_DEVICES='hwmon0 hwmon1'
+ DEVICES=
+ for device in '$OLD_DEVICES'
+ '[' '!' -r hwmon0/name ']'
+ device=hwmon0/device
+ DEVICES=' hwmon0/device'
+ for device in '$OLD_DEVICES'
+ '[' '!' -r hwmon1/name ']'
+ device=hwmon1/device
+ DEVICES=' hwmon0/device hwmon1/device'
+ for device in '$DEVICES'
+ MATCH='hwmon0/device/pwm[1-9]'
++ echo 'hwmon0/device/pwm[1-9]'
+ device_pwm='hwmon0/device/pwm[1-9]'
+ '[' 2 = 1 -a 'hwmon0/device/pwm[1-9]' = 'hwmon0/device/pwm[1-9]' ']'
+ '[' 'hwmon0/device/pwm[1-9]' '!=' 'hwmon0/device/pwm[1-9]' ']'
+ MATCH='hwmon0/device/fan[1-9]_input'
++ echo 'hwmon0/device/fan[1-9]_input'
+ device_fan='hwmon0/device/fan[1-9]_input'
+ '[' 'hwmon0/device/fan[1-9]_input' '!=' 'hwmon0/device/fan[1-9]_input' ']'
+ for device in '$DEVICES'
+ MATCH='hwmon1/device/pwm[1-9]'
++ echo hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3
+ device_pwm='hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3'
+ '[' 2 = 1 -a 'hwmon1/device/pwm[1-9]' = 'hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3' ']'
+ '[' 'hwmon1/device/pwm[1-9]' '!=' 'hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3' ']'
+ PWM=' hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3'
+ MATCH='hwmon1/device/fan[1-9]_input'
++ echo hwmon1/device/fan1_input hwmon1/device/fan2_input hwmon1/device/fan3_input
+ device_fan='hwmon1/device/fan1_input hwmon1/device/fan2_input hwmon1/device/fan3_input'
+ '[' 'hwmon1/device/fan[1-9]_input' '!=' 'hwmon1/device/fan1_input hwmon1/device/fan2_input hwmon1/device/fan3_input' ']'
+ FAN=' hwmon1/device/fan1_input hwmon1/device/fan2_input hwmon1/device/fan3_input'
+ '[' -z ' hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3' ']'
+ '[' -z ' hwmon1/device/fan1_input hwmon1/device/fan2_input hwmon1/device/fan3_input' ']'
+ echo 'Found the following devices:'
Found the following devices:
+ print_devices '   '
+ local name
+ for device in '$DEVICES'
++ cat hwmon0/device/name
+ name=coretemp
+ '[' -z coretemp ']'
+ echo '   hwmon0/device is coretemp'
   hwmon0/device is coretemp
+ for device in '$DEVICES'
++ cat hwmon1/device/name
+ name=f71889fg
+ '[' -z f71889fg ']'
+ echo '   hwmon1/device is f71889fg'
   hwmon1/device is f71889fg
+ echo

+ echo 'Found the following PWM controls:'
Found the following PWM controls:
+ for i in '$PWM'
+ echo '   hwmon1/device/pwm1'
   hwmon1/device/pwm1
+ '[' -w hwmon1/device/pwm1 ']'
+ is_pwm_auto hwmon1/device/pwm1
+ ENABLE=hwmon1/device/pwm1_enable
+ '[' -f hwmon1/device/pwm1_enable ']'
++ cat hwmon1/device/pwm1_enable
+ '[' 1 -gt 1 ']'
+ return 1
+ pwmdisable hwmon1/device/pwm1
+ ENABLE=hwmon1/device/pwm1_enable
+ '[' '!' -f hwmon1/device/pwm1_enable ']'
+ echo 0
++ cat hwmon1/device/pwm1_enable
+ '[' 1 -eq 0 ']'
+ echo 1
++ cat hwmon1/device/pwm1_enable
+ '[' 1 -ne 1 ']'
+ echo 255
++ cat hwmon1/device/pwm1
+ '[' 255 -ge 190 ']'
+ return 0
+ '[' 0 -ne 0 ']'
+ '[' '' = '' ']'
+ GOODPWM=hwmon1/device/pwm1
+ for i in '$PWM'
+ echo '   hwmon1/device/pwm2'
   hwmon1/device/pwm2
+ '[' -w hwmon1/device/pwm2 ']'
+ is_pwm_auto hwmon1/device/pwm2
+ ENABLE=hwmon1/device/pwm2_enable
+ '[' -f hwmon1/device/pwm2_enable ']'
++ cat hwmon1/device/pwm2_enable
+ '[' 1 -gt 1 ']'
+ return 1
+ pwmdisable hwmon1/device/pwm2
+ ENABLE=hwmon1/device/pwm2_enable
+ '[' '!' -f hwmon1/device/pwm2_enable ']'
+ echo 0
++ cat hwmon1/device/pwm2_enable
+ '[' 1 -eq 0 ']'
+ echo 1
++ cat hwmon1/device/pwm2_enable
+ '[' 1 -ne 1 ']'
+ echo 255
++ cat hwmon1/device/pwm2
+ '[' 255 -ge 190 ']'
+ return 0
+ '[' 0 -ne 0 ']'
+ '[' hwmon1/device/pwm1 = '' ']'
+ GOODPWM='hwmon1/device/pwm1 hwmon1/device/pwm2'
+ for i in '$PWM'
+ echo '   hwmon1/device/pwm3'
   hwmon1/device/pwm3
+ '[' -w hwmon1/device/pwm3 ']'
+ is_pwm_auto hwmon1/device/pwm3
+ ENABLE=hwmon1/device/pwm3_enable
+ '[' -f hwmon1/device/pwm3_enable ']'
++ cat hwmon1/device/pwm3_enable
+ '[' 1 -gt 1 ']'
+ return 1
+ pwmdisable hwmon1/device/pwm3
+ ENABLE=hwmon1/device/pwm3_enable
+ '[' '!' -f hwmon1/device/pwm3_enable ']'
+ echo 0
++ cat hwmon1/device/pwm3_enable
+ '[' 1 -eq 0 ']'
+ echo 1
++ cat hwmon1/device/pwm3_enable
+ '[' 1 -ne 1 ']'
+ echo 255
++ cat hwmon1/device/pwm3
+ '[' 255 -ge 190 ']'
+ return 0
+ '[' 0 -ne 0 ']'
+ '[' 'hwmon1/device/pwm1 hwmon1/device/pwm2' = '' ']'
+ GOODPWM='hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3'
+ '[' 'hwmon1/device/pwm1 hwmon1/device/pwm2 hwmon1/device/pwm3' = '' ']'
+ echo

+ echo 'Giving the fans some time to reach full speed...'
Giving the fans some time to reach full speed...
+ sleep 5
+ echo 'Found the following fan sensors:'
Found the following fan sensors:
+ for i in '$FAN'
++ cat hwmon1/device/fan1_input
+ S=3267
+ '[' 3267 = 0 -o 3267 = -1 ']'
+ echo '   hwmon1/device/fan1_input     current speed: 3267 RPM'
   hwmon1/device/fan1_input     current speed: 3267 RPM
+ '[' '' = '' ']'
+ GOODFAN=hwmon1/device/fan1_input
+ SPEEDS=3267
+ for i in '$FAN'
++ cat hwmon1/device/fan2_input
+ S=0
+ '[' 0 = 0 -o 0 = -1 ']'
+ echo '   hwmon1/device/fan2_input     current speed: 0 ... skipping!'
   hwmon1/device/fan2_input     current speed: 0 ... skipping!
+ for i in '$FAN'
++ cat hwmon1/device/fan3_input
+ S=0
+ '[' 0 = 0 -o 0 = -1 ']'
+ echo '   hwmon1/device/fan3_input     current speed: 0 ... skipping!'
   hwmon1/device/fan3_input     current speed: 0 ... skipping!
+ echo

+ '[' hwmon1/device/fan1_input = '' ']'
+ echo 'Warning!!! This program will stop your fans, one at a time,'
Warning!!! This program will stop your fans, one at a time,
+ echo 'for approximately 5 seconds each!!!'
for approximately 5 seconds each!!!
+ echo 'This may cause your processor temperature to rise!!!'
This may cause your processor temperature to rise!!!
+ echo 'If you do not want to do this hit control-C now!!!'
If you do not want to do this hit control-C now!!!
+ echo -n 'Hit return to continue: '
Hit return to continue: + read X
y 
+ echo

+ PLOTTER=gnuplot
+ STEP=15
+ PDELAY=2
+ STEP2=2
+ STEP2_BELOW=31
+ for i in '$GOODPWM'
+ echo Testing pwm control hwmon1/device/pwm1 ...
Testing pwm control hwmon1/device/pwm1 ...
+ pwmenable hwmon1/device/pwm1
+ ENABLE=hwmon1/device/pwm1_enable
+ '[' -w hwmon1/device/pwm1_enable ']'
+ echo 1
+ '[' 0 -ne 0 ']'
+ echo 255
+ '[' 0 -ne 0 ']'
+ pwmset hwmon1/device/pwm1 0
+ echo 0
+ sleep 5
+ '[' 0 -ne 0 ']'
++ cat hwmon1/device/fan1_input
+ CURRENT_SPEEDS=2982
+ pwmdisable hwmon1/device/pwm1
+ ENABLE=hwmon1/device/pwm1_enable
+ '[' '!' -f hwmon1/device/pwm1_enable ']'
+ echo 0
++ cat hwmon1/device/pwm1_enable
+ '[' 1 -eq 0 ']'
+ echo 1
++ cat hwmon1/device/pwm1_enable
+ '[' 1 -ne 1 ']'
+ echo 255
++ cat hwmon1/device/pwm1
+ '[' 255 -ge 190 ']'
+ return 0
+ let pwmactivecount=0
+ let count=1
+ for j in '$GOODFAN'
++ echo 3267
++ cut '-d ' -f1
+ OS=3267
++ echo 2982
++ cut '-d ' -f1
+ S=2982
+ echo '  hwmon1/device/fan1_input ... speed was 3267 now 2982'
  hwmon1/device/fan1_input ... speed was 3267 now 2982
+ let 'threshold=2*3267/3'
+ '[' 2982 -lt 2178 ']'
+ echo '    no correlation'
    no correlation
+ let count=count+1
+ echo

+ '[' 0 = 0 ']'
+ echo 'No correlations were detected.'
No correlations were detected.
+ echo 'There is either no fan connected to the output of hwmon1/device/pwm1,'
There is either no fan connected to the output of hwmon1/device/pwm1,
+ echo 'or the connected fan has no rpm-signal connected to one of'
or the connected fan has no rpm-signal connected to one of
+ echo 'the tested fan sensors. (Note: not all motherboards have'
the tested fan sensors. (Note: not all motherboards have
+ echo 'the pwm outputs connected to the fan connectors,'
the pwm outputs connected to the fan connectors,
+ echo 'check out the hardware database on http://www.almico.com/forumindex.php)'
check out the hardware database on http://www.almico.com/forumindex.php)
+ echo

+ echo -n 'Did you see/hear a fan stopping during the above test (n)? '
Did you see/hear a fan stopping during the above test (n)? + read X
y
+ '[' y = y -o y = Y ']'
+ pwmactive='hwmon1/device/pwm1 '
+ echo

+ for i in '$GOODPWM'
+ echo Testing pwm control hwmon1/device/pwm2 ...
Testing pwm control hwmon1/device/pwm2 ...
+ pwmenable hwmon1/device/pwm2
+ ENABLE=hwmon1/device/pwm2_enable
+ '[' -w hwmon1/device/pwm2_enable ']'
+ echo 1
+ '[' 0 -ne 0 ']'
+ echo 255
+ '[' 0 -ne 0 ']'
+ pwmset hwmon1/device/pwm2 0
+ echo 0
+ sleep 5
+ '[' 0 -ne 0 ']'
++ cat hwmon1/device/fan1_input
+ CURRENT_SPEEDS=3282
+ pwmdisable hwmon1/device/pwm2
+ ENABLE=hwmon1/device/pwm2_enable
+ '[' '!' -f hwmon1/device/pwm2_enable ']'
+ echo 0
++ cat hwmon1/device/pwm2_enable
+ '[' 1 -eq 0 ']'
+ echo 1
++ cat hwmon1/device/pwm2_enable
+ '[' 1 -ne 1 ']'
+ echo 255
++ cat hwmon1/device/pwm2
+ '[' 255 -ge 190 ']'
+ return 0
+ let pwmactivecount=0
+ let count=1
+ for j in '$GOODFAN'
++ echo 3267
++ cut '-d ' -f1
+ OS=3267
++ echo 3282
++ cut '-d ' -f1
+ S=3282
+ echo '  hwmon1/device/fan1_input ... speed was 3267 now 3282'
  hwmon1/device/fan1_input ... speed was 3267 now 3282
+ let 'threshold=2*3267/3'
+ '[' 3282 -lt 2178 ']'
+ echo '    no correlation'
    no correlation
+ let count=count+1
+ echo

+ '[' 0 = 0 ']'
+ echo 'No correlations were detected.'
No correlations were detected.
+ echo 'There is either no fan connected to the output of hwmon1/device/pwm2,'
There is either no fan connected to the output of hwmon1/device/pwm2,
+ echo 'or the connected fan has no rpm-signal connected to one of'
or the connected fan has no rpm-signal connected to one of
+ echo 'the tested fan sensors. (Note: not all motherboards have'
the tested fan sensors. (Note: not all motherboards have
+ echo 'the pwm outputs connected to the fan connectors,'
the pwm outputs connected to the fan connectors,
+ echo 'check out the hardware database on http://www.almico.com/forumindex.php)'
check out the hardware database on http://www.almico.com/forumindex.php)
+ echo

+ echo -n 'Did you see/hear a fan stopping during the above test (n)? '
Did you see/hear a fan stopping during the above test (n)? + read X
n
+ '[' n = y -o n = Y ']'
+ echo

+ for i in '$GOODPWM'
+ echo Testing pwm control hwmon1/device/pwm3 ...
Testing pwm control hwmon1/device/pwm3 ...
+ pwmenable hwmon1/device/pwm3
+ ENABLE=hwmon1/device/pwm3_enable
+ '[' -w hwmon1/device/pwm3_enable ']'
+ echo 1
+ '[' 0 -ne 0 ']'
+ echo 255
+ '[' 0 -ne 0 ']'
+ pwmset hwmon1/device/pwm3 0
+ echo 0
+ sleep 5
+ '[' 0 -ne 0 ']'
++ cat hwmon1/device/fan1_input
+ CURRENT_SPEEDS=3282
+ pwmdisable hwmon1/device/pwm3
+ ENABLE=hwmon1/device/pwm3_enable
+ '[' '!' -f hwmon1/device/pwm3_enable ']'
+ echo 0
++ cat hwmon1/device/pwm3_enable
+ '[' 1 -eq 0 ']'
+ echo 1
++ cat hwmon1/device/pwm3_enable
+ '[' 1 -ne 1 ']'
+ echo 255
++ cat hwmon1/device/pwm3
+ '[' 255 -ge 190 ']'
+ return 0
+ let pwmactivecount=0
+ let count=1
+ for j in '$GOODFAN'
++ echo 3267
++ cut '-d ' -f1
+ OS=3267
++ echo 3282
++ cut '-d ' -f1
+ S=3282
+ echo '  hwmon1/device/fan1_input ... speed was 3267 now 3282'
  hwmon1/device/fan1_input ... speed was 3267 now 3282
+ let 'threshold=2*3267/3'
+ '[' 3282 -lt 2178 ']'
+ echo '    no correlation'
    no correlation
+ let count=count+1
+ echo

+ '[' 0 = 0 ']'
+ echo 'No correlations were detected.'
No correlations were detected.
+ echo 'There is either no fan connected to the output of hwmon1/device/pwm3,'
There is either no fan connected to the output of hwmon1/device/pwm3,
+ echo 'or the connected fan has no rpm-signal connected to one of'
or the connected fan has no rpm-signal connected to one of
+ echo 'the tested fan sensors. (Note: not all motherboards have'
the tested fan sensors. (Note: not all motherboards have
+ echo 'the pwm outputs connected to the fan connectors,'
the pwm outputs connected to the fan connectors,
+ echo 'check out the hardware database on http://www.almico.com/forumindex.php)'
check out the hardware database on http://www.almico.com/forumindex.php)
+ echo

+ echo -n 'Did you see/hear a fan stopping during the above test (n)? '
Did you see/hear a fan stopping during the above test (n)? + read X
n
+ '[' n = y -o n = Y ']'
+ echo

+ echo 'Testing is complete.'
Testing is complete.
+ echo 'Please verify that all fans have returned to their normal speed.'
Please verify that all fans have returned to their normal speed.
+ echo

+ echo 'The fancontrol script can automatically respond to temperature changes'
The fancontrol script can automatically respond to temperature changes
+ echo 'of your system by changing fanspeeds.'
of your system by changing fanspeeds.
+ echo -n 'Do you want to set up its configuration file now (y)? '
Do you want to set up its configuration file now (y)? + read X
y
+ '[' y = n -o y = N ']'
+ for device in '$DEVICES'
+ MATCH='hwmon0/device/temp[1-9]_input'
++ echo hwmon0/device/temp2_input hwmon0/device/temp3_input
+ device_temp='hwmon0/device/temp2_input hwmon0/device/temp3_input'
+ '[' 'hwmon0/device/temp[1-9]_input' '!=' 'hwmon0/device/temp2_input hwmon0/device/temp3_input' ']'
+ TEMPS=' hwmon0/device/temp2_input hwmon0/device/temp3_input'
+ for device in '$DEVICES'
+ MATCH='hwmon1/device/temp[1-9]_input'
++ echo hwmon1/device/temp1_input hwmon1/device/temp2_input hwmon1/device/temp3_input
+ device_temp='hwmon1/device/temp1_input hwmon1/device/temp2_input hwmon1/device/temp3_input'
+ '[' 'hwmon1/device/temp[1-9]_input' '!=' 'hwmon1/device/temp1_input hwmon1/device/temp2_input hwmon1/device/temp3_input' ']'
+ TEMPS=' hwmon0/device/temp2_input hwmon0/device/temp3_input hwmon1/device/temp1_input hwmon1/device/temp2_input hwmon1/device/temp3_input'
+ '[' -z ' hwmon0/device/temp2_input hwmon0/device/temp3_input hwmon1/device/temp1_input hwmon1/device/temp2_input hwmon1/device/temp3_input' ']'
+ AskPath
+ echo -n 'What should be the path to your fancontrol config file (/etc/fancontrol)? '
What should be the path to your fancontrol config file (/etc/fancontrol)? + read FCCONFIG

+ '[' '' = '' ']'
+ FCCONFIG=/etc/fancontrol
+ LoadConfig /etc/fancontrol
+ local OLD_DEVPATH OLD_DEVNAME
+ '[' '!' -f /etc/fancontrol ']'
+ echo 'Loading configuration from /etc/fancontrol ...'
Loading configuration from /etc/fancontrol ...
++ egrep '^INTERVAL=.*$' /etc/fancontrol
++ sed -e 's/INTERVAL= *//g'
+ INTERVAL=10
++ egrep '^DEVPATH=.*$' /etc/fancontrol
++ sed -e 's/DEVPATH= *//g'
+ OLD_DEVPATH='hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/f71882fg.2560'
++ egrep '^DEVNAME=.*$' /etc/fancontrol
++ sed -e 's/DEVNAME= *//g'
+ OLD_DEVNAME='hwmon0=coretemp hwmon1=f71889fg'
++ egrep '^FCTEMPS=.*$' /etc/fancontrol
++ sed -e 's/FCTEMPS= *//g'
+ FCTEMPS=hwmon1/device/pwm1=hwmon0/device/temp2_input
++ egrep '^FCFANS=.*$' /etc/fancontrol
++ sed -e 's/FCFANS= *//g'
+ FCFANS=hwmon1/device/pwm1=
++ egrep '^MINTEMP=.*$' /etc/fancontrol
++ sed -e 's/MINTEMP= *//g'
+ MINTEMP=hwmon1/device/pwm1=45
++ egrep '^MAXTEMP=.*$' /etc/fancontrol
++ sed -e 's/MAXTEMP= *//g'
+ MAXTEMP=hwmon1/device/pwm1=65
++ egrep '^MINSTART=.*$' /etc/fancontrol
++ sed -e 's/MINSTART= *//g'
+ MINSTART=hwmon1/device/pwm1=150
++ egrep '^MINSTOP=.*$' /etc/fancontrol
++ sed -e 's/MINSTOP= *//g'
+ MINSTOP=hwmon1/device/pwm1=0
++ egrep '^MINPWM=.*$' /etc/fancontrol
++ sed -e 's/MINPWM= *//g'
+ MINPWM=
++ egrep '^MAXPWM=.*$' /etc/fancontrol
++ sed -e 's/MAXPWM= *//g'
+ MAXPWM=
+ ValidateDevices 'hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/f71882fg.2560' 'hwmon0=coretemp hwmon1=f71889fg'
+ local 'OLD_DEVPATH=hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/f71882fg.2560' 'OLD_DEVNAME=hwmon0=coretemp hwmon1=f71889fg' outdated=0
+ local entry device name path
+ for entry in '$OLD_DEVPATH'
++ echo hwmon0=devices/platform/coretemp.0
++ sed -e 's/=[^=]*$//'
+ device=hwmon0
++ echo hwmon0=devices/platform/coretemp.0
++ sed -e 's/^[^=]*=//'
+ path=devices/platform/coretemp.0
++ DevicePath hwmon0
++ '[' -h hwmon0/device ']'
++ readlink -f hwmon0/device
++ sed -e 's/^\/sys\///'
+ '[' devices/platform/coretemp.0 '!=' devices/platform/coretemp.0 ']'
+ for entry in '$OLD_DEVPATH'
++ echo hwmon1=devices/platform/f71882fg.2560
++ sed -e 's/=[^=]*$//'
+ device=hwmon1
++ echo hwmon1=devices/platform/f71882fg.2560
++ sed -e 's/^[^=]*=//'
+ path=devices/platform/f71882fg.2560
++ DevicePath hwmon1
++ '[' -h hwmon1/device ']'
++ readlink -f hwmon1/device
++ sed -e 's/^\/sys\///'
+ '[' devices/platform/f71882fg.2560 '!=' devices/platform/f71882fg.2560 ']'
+ for entry in '$OLD_DEVNAME'
++ echo hwmon0=coretemp
++ sed -e 's/=[^=]*$//'
+ device=hwmon0
++ echo hwmon0=coretemp
++ sed -e 's/^[^=]*=//'
+ name=coretemp
++ DeviceName hwmon0
++ '[' -r hwmon0/name ']'
++ '[' -r hwmon0/device/name ']'
++ cat hwmon0/device/name
++ sed -e 's/[[:space:]=]/_/g'
+ '[' coretemp '!=' coretemp ']'
+ for entry in '$OLD_DEVNAME'
++ echo hwmon1=f71889fg
++ sed -e 's/=[^=]*$//'
+ device=hwmon1
++ echo hwmon1=f71889fg
++ sed -e 's/^[^=]*=//'
+ name=f71889fg
++ DeviceName hwmon1
++ '[' -r hwmon1/name ']'
++ '[' -r hwmon1/device/name ']'
++ cat hwmon1/device/name
++ sed -e 's/[[:space:]=]/_/g'
+ '[' f71889fg '!=' f71889fg ']'
+ return 0
+ INTERVAL=10
+ PS3='select (1-n): '
+ DEFMINTEMP=20
+ DEFMAXTEMP=60
+ DEFMINSTART=150
+ DEFMINSTOP=100
+ '[' 1 ']'
+ echo

+ echo 'Select fan output to configure, or other action:'
Select fan output to configure, or other action:
+ select pwms in '$pwmactive' '"Change INTERVAL"' '"Just quit"' '"Save and quit"' '"Show configuration"'
1) hwmon1/device/pwm1  3) Just quit	      5) Show configuration
2) Change INTERVAL     4) Save and quit
select (1-n): 1
+ case $pwms in
++ echo hwmon1/device/pwm1
++ sed -e 's/ /\n/g'
++ egrep hwmon1/device/pwm1
++ echo hwmon1/device/pwm1
++ sed -e 's/\//\\\//g'
+ pwmsed='hwmon1\/device\/pwm1'
+ echo

+ echo Devices:
Devices:
+ print_devices ''
+ local name
+ for device in '$DEVICES'
++ cat hwmon0/device/name
+ name=coretemp
+ '[' -z coretemp ']'
+ echo 'hwmon0/device is coretemp'
hwmon0/device is coretemp
+ for device in '$DEVICES'
++ cat hwmon1/device/name
+ name=f71889fg
+ '[' -z f71889fg ']'
+ echo 'hwmon1/device is f71889fg'
hwmon1/device is f71889fg
+ echo

+ echo 'Current temperature readings are as follows:'
Current temperature readings are as follows:
+ for j in '$TEMPS'
++ cat hwmon0/device/temp2_input
+ S=38000
+ let 'S=38000 / 1000'
+ echo 'hwmon0/device/temp2_input	38'
hwmon0/device/temp2_input	38
+ for j in '$TEMPS'
++ cat hwmon0/device/temp3_input
+ S=37000
+ let 'S=37000 / 1000'
+ echo 'hwmon0/device/temp3_input	37'
hwmon0/device/temp3_input	37
+ for j in '$TEMPS'
++ cat hwmon1/device/temp1_input
+ S=36000
+ let 'S=36000 / 1000'
+ echo 'hwmon1/device/temp1_input	36'
hwmon1/device/temp1_input	36
+ for j in '$TEMPS'
++ cat hwmon1/device/temp2_input
+ S=39000
+ let 'S=39000 / 1000'
+ echo 'hwmon1/device/temp2_input	39'
hwmon1/device/temp2_input	39
+ for j in '$TEMPS'
++ cat hwmon1/device/temp3_input
+ S=36000
+ let 'S=36000 / 1000'
+ echo 'hwmon1/device/temp3_input	36'
hwmon1/device/temp3_input	36
++ echo
++ cut '-d ' -f1
+ FAN=
++ echo
++ cut '-d ' -f1
+ FAN_MIN=
++ echo hwmon1/device/pwm1=
++ sed -e 's/hwmon1\/device\/pwm1[^ ]* *//g'
+ FCFANS=' hwmon1/device/pwm1='
+ echo

+ echo 'Select a temperature sensor as source for hwmon1/device/pwm1:'
Select a temperature sensor as source for hwmon1/device/pwm1:
+ select tempss in '$TEMPS' '"None (Do not affect this PWM output)"'
1) hwmon0/device/temp2_input
2) hwmon0/device/temp3_input
3) hwmon1/device/temp1_input
4) hwmon1/device/temp2_input
5) hwmon1/device/temp3_input
6) None (Do not affect this PWM output)
select (1-n): 1
+ '[' hwmon0/device/temp2_input = 'None (Do not affect this PWM output)' ']'
+ '[' hwmon1/device/pwm1=hwmon0/device/temp2_input = '' ']'
++ echo hwmon1/device/pwm1=hwmon0/device/temp2_input
++ sed -e 's/hwmon1\/device\/pwm1[^ ]* *//g'
+ FCTEMPS=' hwmon1/device/pwm1=hwmon0/device/temp2_input'
+ echo

+ echo 'Enter the low temperature (degree C)'
Enter the low temperature (degree C)
+ echo -n 'below which the fan should spin at minimum speed (20): '
below which the fan should spin at minimum speed (20): + read XMT
45
+ '[' 45 = '' ']'
+ '[' hwmon1/device/pwm1=45 = '' ']'
++ echo hwmon1/device/pwm1=45
++ sed -e 's/hwmon1\/device\/pwm1[^ ]* *//g'
+ MINTEMP=' hwmon1/device/pwm1=45'
+ echo

+ echo 'Enter the high temperature (degree C)'
Enter the high temperature (degree C)
+ echo -n 'over which the fan should spin at maximum speed (60): '
over which the fan should spin at maximum speed (60): + read XMT
65
+ '[' 65 = '' ']'
+ '[' hwmon1/device/pwm1=65 = '' ']'
++ echo hwmon1/device/pwm1=65
++ sed -e 's/hwmon1\/device\/pwm1[^ ]* *//g'
+ MAXTEMP=' hwmon1/device/pwm1=65'
+ '[' -eq 0 ']'
/usr/sbin/pwmconfig: line 926: [: -eq: unary operator expected
+ XMSTOP=0
+ '[' hwmon1/device/pwm1=0 = '' ']'
++ echo hwmon1/device/pwm1=0
++ sed -e 's/hwmon1\/device\/pwm1[^ ]* *//g'
+ MINSTOP=' hwmon1/device/pwm1=0'
+ '[' -eq 0 ']'
/usr/sbin/pwmconfig: line 952: [: -eq: unary operator expected
+ XMSTART=150
+ '[' hwmon1/device/pwm1=150 = '' ']'
++ echo hwmon1/device/pwm1=150
++ sed -e 's/hwmon1\/device\/pwm1[^ ]* *//g'
+ MINSTART=' hwmon1/device/pwm1=150'
+ '[' 0 -gt 0 ']'
+ XMINP=
+ '[' -n '' ']'
+ echo

+ echo 'Enter the PWM value (0-255) to use when the temperature'
Enter the PWM value (0-255) to use when the temperature
+ echo -n 'is over the high temperature limit (255): '
is over the high temperature limit (255): + read XMAXP

+ '[' -n '' ']'
+ echo

+ break
+ break
+ '[' 1 ']'
+ echo

+ echo 'Select fan output to configure, or other action:'
Select fan output to configure, or other action:
+ select pwms in '$pwmactive' '"Change INTERVAL"' '"Just quit"' '"Save and quit"' '"Show configuration"'
1) hwmon1/device/pwm1  3) Just quit	      5) Show configuration
2) Change INTERVAL     4) Save and quit
select (1-n): 5
+ case $pwms in
+ echo

+ echo 'Common Settings:'
Common Settings:
+ echo INTERVAL=10
INTERVAL=10
+ for pwmo in '$pwmactive'
+ echo

+ echo 'Settings of hwmon1/device/pwm1:'
Settings of hwmon1/device/pwm1:
++ filter_cfgvar ' hwmon1/device/pwm1=hwmon0/device/temp2_input' hwmon1/device/pwm1
++ echo ' hwmon1/device/pwm1=hwmon0/device/temp2_input'
++ sed -e 's/.*=//g'
++ egrep hwmon1/device/pwm1
++ sed -e 's/ /\n/g'
+ echo '  Depends on hwmon0/device/temp2_input'
  Depends on hwmon0/device/temp2_input
++ filter_cfgvar ' hwmon1/device/pwm1=' hwmon1/device/pwm1
++ echo ' hwmon1/device/pwm1='
++ sed -e 's/.*=//g'
++ egrep hwmon1/device/pwm1
++ sed -e 's/ /\n/g'
+ echo '  Controls '
  Controls 
++ filter_cfgvar ' hwmon1/device/pwm1=45' hwmon1/device/pwm1
++ echo ' hwmon1/device/pwm1=45'
++ sed -e 's/.*=//g'
++ egrep hwmon1/device/pwm1
++ sed -e 's/ /\n/g'
+ echo '  MINTEMP=45'
  MINTEMP=45
++ filter_cfgvar ' hwmon1/device/pwm1=65' hwmon1/device/pwm1
++ echo ' hwmon1/device/pwm1=65'
++ egrep hwmon1/device/pwm1
++ sed -e 's/.*=//g'
++ sed -e 's/ /\n/g'
+ echo '  MAXTEMP=65'
  MAXTEMP=65
++ filter_cfgvar ' hwmon1/device/pwm1=150' hwmon1/device/pwm1
++ echo ' hwmon1/device/pwm1=150'
++ sed -e 's/.*=//g'
++ egrep hwmon1/device/pwm1
++ sed -e 's/ /\n/g'
+ echo '  MINSTART=150'
  MINSTART=150
++ filter_cfgvar ' hwmon1/device/pwm1=0' hwmon1/device/pwm1
++ echo ' hwmon1/device/pwm1=0'
++ egrep hwmon1/device/pwm1
++ sed -e 's/.*=//g'
++ sed -e 's/ /\n/g'
+ echo '  MINSTOP=0'
  MINSTOP=0
++ filter_cfgvar '' hwmon1/device/pwm1
++ echo ''
++ egrep hwmon1/device/pwm1
++ sed -e 's/ /\n/g'
++ sed -e 's/.*=//g'
+ XMINP=
+ '[' -n '' ']'
++ filter_cfgvar '' hwmon1/device/pwm1
++ echo ''
++ sed -e 's/.*=//g'
++ egrep hwmon1/device/pwm1
++ sed -e 's/ /\n/g'
+ XMAXP=
+ '[' -n '' ']'
+ echo

+ break
+ '[' 1 ']'
+ echo

+ echo 'Select fan output to configure, or other action:'
Select fan output to configure, or other action:
+ select pwms in '$pwmactive' '"Change INTERVAL"' '"Just quit"' '"Save and quit"' '"Show configuration"'
1) hwmon1/device/pwm1  3) Just quit	      5) Show configuration
2) Change INTERVAL     4) Save and quit
select (1-n): 4
+ case $pwms in
+ SaveConfig
+ RememberDevices ' hwmon1/device/pwm1=hwmon0/device/temp2_input' ' hwmon1/device/pwm1='
+ local used entry device name path tempfandev pwmdev
+ DEVPATH=
+ DEVNAME=
+ for device in '$DEVICES'
++ echo hwmon0/device
++ sed -e 's/\/.*$//'
+ device=hwmon0
+ used=0
+ for entry in '$1' '$2'
++ echo hwmon1/device/pwm1=hwmon0/device/temp2_input
++ sed -e 's/\/.*$//'
+ pwmdev=hwmon1
++ echo hwmon1/device/pwm1=hwmon0/device/temp2_input
++ sed -e 's/^[^=]*=//' -e 's/\/.*$//'
+ tempfandev=hwmon0
+ '[' hwmon0 = hwmon1 -o hwmon0 = hwmon0 ']'
+ used=1
+ for entry in '$1' '$2'
++ echo hwmon1/device/pwm1=
++ sed -e 's/\/.*$//'
+ pwmdev=hwmon1
++ echo hwmon1/device/pwm1=
++ sed -e 's/^[^=]*=//' -e 's/\/.*$//'
+ tempfandev=
+ '[' hwmon0 = hwmon1 -o hwmon0 = '' ']'
+ '[' 1 -eq 0 ']'
++ DevicePath hwmon0
++ '[' -h hwmon0/device ']'
++ readlink -f hwmon0/device
++ sed -e 's/^\/sys\///'
+ path=devices/platform/coretemp.0
+ '[' -z '' ']'
+ DEVPATH=hwmon0=devices/platform/coretemp.0
++ DeviceName hwmon0
++ '[' -r hwmon0/name ']'
++ '[' -r hwmon0/device/name ']'
++ cat hwmon0/device/name
++ sed -e 's/[[:space:]=]/_/g'
+ name=coretemp
+ '[' -z '' ']'
+ DEVNAME=hwmon0=coretemp
+ for device in '$DEVICES'
++ echo hwmon1/device
++ sed -e 's/\/.*$//'
+ device=hwmon1
+ used=0
+ for entry in '$1' '$2'
++ echo hwmon1/device/pwm1=hwmon0/device/temp2_input
++ sed -e 's/\/.*$//'
+ pwmdev=hwmon1
++ echo hwmon1/device/pwm1=hwmon0/device/temp2_input
++ sed -e 's/^[^=]*=//' -e 's/\/.*$//'
+ tempfandev=hwmon0
+ '[' hwmon1 = hwmon1 -o hwmon1 = hwmon0 ']'
+ used=1
+ for entry in '$1' '$2'
++ echo hwmon1/device/pwm1=
++ sed -e 's/\/.*$//'
+ pwmdev=hwmon1
++ echo hwmon1/device/pwm1=
++ sed -e 's/^[^=]*=//' -e 's/\/.*$//'
+ tempfandev=
+ '[' hwmon1 = hwmon1 -o hwmon1 = '' ']'
+ used=1
+ '[' 1 -eq 0 ']'
++ DevicePath hwmon1
++ '[' -h hwmon1/device ']'
++ readlink -f hwmon1/device
++ sed -e 's/^\/sys\///'
+ path=devices/platform/f71882fg.2560
+ '[' -z hwmon0=devices/platform/coretemp.0 ']'
+ DEVPATH='hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/f71882fg.2560'
++ DeviceName hwmon1
++ '[' -r hwmon1/name ']'
++ '[' -r hwmon1/device/name ']'
++ cat hwmon1/device/name
++ sed -e 's/[[:space:]=]/_/g'
+ name=f71889fg
+ '[' -z hwmon0=coretemp ']'
+ DEVNAME='hwmon0=coretemp hwmon1=f71889fg'
+ echo

+ echo 'Saving configuration to /etc/fancontrol...'
Saving configuration to /etc/fancontrol...
++ mktemp -t pwmcfg.XXXXXXXXXX
+ tmpfile=/tmp/pwmcfg.wIUWWafmz9
+ trap ' [ -f "/tmp/pwmcfg.wIUWWafmz9" ] && /bin/rm -f -- "/tmp/pwmcfg.wIUWWafmz9"' 0 1 2 3 13 15
+ echo '# Configuration file generated by pwmconfig, changes will be lost'
+ echo INTERVAL=10
+ echo 'DEVPATH=hwmon0=devices/platform/coretemp.0 hwmon1=devices/platform/f71882fg.2560'
+ echo 'DEVNAME=hwmon0=coretemp hwmon1=f71889fg'
+ echo 'FCTEMPS= hwmon1/device/pwm1=hwmon0/device/temp2_input'
+ echo 'FCFANS= hwmon1/device/pwm1='
+ echo 'MINTEMP= hwmon1/device/pwm1=45'
+ echo 'MAXTEMP= hwmon1/device/pwm1=65'
+ echo 'MINSTART= hwmon1/device/pwm1=150'
+ echo 'MINSTOP= hwmon1/device/pwm1=0'
+ '[' -n '' ']'
+ '[' -n '' ']'
+ mv /tmp/pwmcfg.wIUWWafmz9 /etc/fancontrol
+ chmod +r /etc/fancontrol
+ echo 'Configuration saved'
Configuration saved
+ exit
+ '[' -f /tmp/pwmcfg.wIUWWafmz9 ']'

Script done on Tue Jul  8 17:11:59 2014