dmesg.txt

dmesg.txt (text/plain), 25.29 KB, created by mrl4n on 2014-06-17 16:15:13 UTC

 # dmesg
[    2.913685] ata6: PATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 16
[    3.110358] ata5.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/100
[    3.110361] ata5.00: 156301488 sectors, multi 0: LBA48 
[    3.111514] ata5.01: HPA detected: current 781420655, native 781422768
[    3.111517] ata5.01: ATA-7: Maxtor 6H400R0, HA3D1D90, max UDMA/133
[    3.111519] ata5.01: 781420655 sectors, multi 0: LBA48 
[    3.150362] ata5.00: configured for UDMA/100
[    3.191468] ata5.01: configured for UDMA/100
[    3.191577] scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[    3.191865] sd 4:0:0:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    3.191918] sd 4:0:0:0: [sde] Write Protect is off
[    3.191921] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    3.191940] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.192194] scsi 4:0:1:0: Direct-Access     ATA      Maxtor 6H400R0   HA3D PQ: 0 ANSI: 5
[    3.203773]  sde: sde1
[    3.203788] sd 4:0:1:0: [sdf] 781420655 512-byte logical blocks: (400 GB/372 GiB)
[    3.203834] sd 4:0:1:0: [sdf] Write Protect is off
[    3.203838] sd 4:0:1:0: [sdf] Mode Sense: 00 3a 00 00
[    3.203860] sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.204159] sd 4:0:0:0: [sde] Attached SCSI disk
[    3.228240]  sdf: sdf1
[    3.228552] sd 4:0:1:0: [sdf] Attached SCSI disk
[    3.812012] sd 0:0:1:0: Attached scsi generic sg0 type 0
[    3.812088] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.812182] sd 1:0:1:0: Attached scsi generic sg2 type 0
[    3.812255] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    3.812347] sd 3:0:0:0: Attached scsi generic sg4 type 0
[    3.812422] sd 4:0:0:0: Attached scsi generic sg5 type 0
[    3.812505] sd 4:0:1:0: Attached scsi generic sg6 type 0
[    4.040881] scsi: <fdomain> Detection failed (no card)
[    4.096279] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.222646] imm: Version 2.05 (for Linux 2.4.0)
[    4.441438] Fusion MPT base driver 3.04.20
[    4.441440] Copyright (c) 1999-2008 LSI Corporation
[    4.512925] Fusion MPT SPI Host driver 3.04.20
[    4.562959] Fusion MPT FC Host driver 3.04.20
[    4.606818] Fusion MPT SAS Host driver 3.04.20
[    4.642340] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.678581] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.714708] Compaq SMART2 Driver (v 2.6.0)
[    4.791861] HP CISS Driver (v 3.6.26)
[    4.905646] Adaptec aacraid driver 1.2-0[30200]-ms
[    4.985171] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    4.986663] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    5.058505] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
[    5.101793] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
[    5.167260] Emulex LightPulse Fibre Channel SCSI driver 8.3.42
[    5.167262] Copyright(c) 2004-2013 Emulex.  All rights reserved.
[    5.254907] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    5.319165] ACPI: bus type USB registered
[    5.319336] usbcore: registered new interface driver usbfs
[    5.319389] usbcore: registered new interface driver hub
[    5.319489] usbcore: registered new device driver usb
[    5.321657] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.323943] ehci-pci: EHCI PCI platform driver
[    5.324088] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    5.324109] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    5.324118] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    5.324132] ehci-pci 0000:00:1a.7: debug port 1
[    5.328030] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    5.328049] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfffc00
[    5.340013] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    5.340077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.340081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.340083] usb usb1: Product: EHCI Host Controller
[    5.340085] usb usb1: Manufacturer: Linux 3.12.13-gentoo ehci_hcd
[    5.340087] usb usb1: SerialNumber: 0000:00:1a.7
[    5.340329] hub 1-0:1.0: USB hub found
[    5.340337] hub 1-0:1.0: 6 ports detected
[    5.340575] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    5.340585] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    5.340590] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    5.340601] ehci-pci 0000:00:1d.7: debug port 1
[    5.344511] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    5.344525] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbfff800
[    5.360025] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.360068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.360070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.360073] usb usb2: Product: EHCI Host Controller
[    5.360075] usb usb2: Manufacturer: Linux 3.12.13-gentoo ehci_hcd
[    5.360077] usb usb2: SerialNumber: 0000:00:1d.7
[    5.360313] hub 2-0:1.0: USB hub found
[    5.360322] hub 2-0:1.0: 6 ports detected
[    5.451343] usbcore: registered new interface driver usb-storage
[    5.496768] uhci_hcd: USB Universal Host Controller Interface driver
[    5.496915] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    5.496918] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    5.496925] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    5.496951] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00008800
[    5.497025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.497028] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.497030] usb usb3: Product: UHCI Host Controller
[    5.497032] usb usb3: Manufacturer: Linux 3.12.13-gentoo uhci_hcd
[    5.497033] usb usb3: SerialNumber: 0000:00:1a.0
[    5.497254] hub 3-0:1.0: USB hub found
[    5.497262] hub 3-0:1.0: 2 ports detected
[    5.497443] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    5.497445] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    5.497452] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    5.497485] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00008880
[    5.497538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.497541] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.497542] usb usb4: Product: UHCI Host Controller
[    5.497544] usb usb4: Manufacturer: Linux 3.12.13-gentoo uhci_hcd
[    5.497546] usb usb4: SerialNumber: 0000:00:1a.1
[    5.497752] hub 4-0:1.0: USB hub found
[    5.497758] hub 4-0:1.0: 2 ports detected
[    5.497914] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    5.497916] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    5.497922] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    5.497944] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00008c00
[    5.498009] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.498011] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.498013] usb usb5: Product: UHCI Host Controller
[    5.498015] usb usb5: Manufacturer: Linux 3.12.13-gentoo uhci_hcd
[    5.498016] usb usb5: SerialNumber: 0000:00:1a.2
[    5.498218] hub 5-0:1.0: USB hub found
[    5.498225] hub 5-0:1.0: 2 ports detected
[    5.498390] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.498393] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.498398] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    5.498419] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00008080
[    5.498475] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    5.498477] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.498479] usb usb6: Product: UHCI Host Controller
[    5.498481] usb usb6: Manufacturer: Linux 3.12.13-gentoo uhci_hcd
[    5.498483] usb usb6: SerialNumber: 0000:00:1d.0
[    5.498672] hub 6-0:1.0: USB hub found
[    5.498679] hub 6-0:1.0: 2 ports detected
[    5.498836] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.498838] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.498844] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    5.498865] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008400
[    5.498922] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    5.498924] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.498926] usb usb7: Product: UHCI Host Controller
[    5.498928] usb usb7: Manufacturer: Linux 3.12.13-gentoo uhci_hcd
[    5.498930] usb usb7: SerialNumber: 0000:00:1d.1
[    5.499118] hub 7-0:1.0: USB hub found
[    5.499126] hub 7-0:1.0: 2 ports detected
[    5.499281] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.499284] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.499290] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    5.499311] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008480
[    5.499367] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    5.499370] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.499371] usb usb8: Product: UHCI Host Controller
[    5.499373] usb usb8: Manufacturer: Linux 3.12.13-gentoo uhci_hcd
[    5.499375] usb usb8: SerialNumber: 0000:00:1d.2
[    5.499584] hub 8-0:1.0: USB hub found
[    5.499591] hub 8-0:1.0: 2 ports detected
[    5.545358] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.639993] usbcore: registered new interface driver usbhid
[    5.639996] usbhid: USB HID core driver
[    5.660205] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    5.812461] usb 1-3: New USB device found, idVendor=04e8, idProduct=6860
[    5.812464] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.812466] usb 1-3: Product: SAMSUNG_Android
[    5.812468] usb 1-3: Manufacturer: SAMSUNG
[    5.812469] usb 1-3: SerialNumber: ab33572c
[    5.930037] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    6.044097] device-mapper: uevent: version 1.0.3
[    6.044209] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [e-mail]
[    6.080347] usb 1-5: New USB device found, idVendor=0409, idProduct=005a
[    6.080351] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.080660] hub 1-5:1.0: USB hub found
[    6.080708] hub 1-5:1.0: 4 ports detected
[    6.200054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    6.396366] md: raid0 personality registered for level 0
[    6.445676] md: raid1 personality registered for level 1
[    6.508937] async_tx: api initialized (async)
[    6.562692] usb 2-1: New USB device found, idVendor=046d, idProduct=081b
[    6.562695] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    6.562697] usb 2-1: SerialNumber: DE8C49A0
[    6.680029] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    6.680031] raid6: sse2x1    4328 MB/s
[    6.845444] usb 2-2: New USB device found, idVendor=07d1, idProduct=3c0a
[    6.845447] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.845449] usb 2-2: Product: 11n Adapter
[    6.845451] usb 2-2: Manufacturer: Ralink
[    6.845452] usb 2-2: SerialNumber: 1.0
[    6.850018] raid6: sse2x2    5101 MB/s
[    7.020018] raid6: sse2x4    7363 MB/s
[    7.020021] raid6: using algorithm sse2x4 (7363 MB/s)
[    7.020022] raid6: using ssse3x2 recovery algorithm
[    7.046044] xor: measuring software checksum speed
[    7.090033] usb 2-6: new high-speed USB device number 6 using ehci-pci
[    7.140027]    prefetch64-sse: 11124.400 MB/sec
[    7.240007]    generic_sse:  9709.600 MB/sec
[    7.240009] xor: using function: prefetch64-sse (11124.400 MB/sec)
[    7.240948] usb 2-6: New USB device found, idVendor=0924, idProduct=3d69
[    7.240950] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.240952] usb 2-6: Product: WorkCentre 6015B
[    7.240954] usb 2-6: Manufacturer: Xerox
[    7.240955] usb 2-6: SerialNumber: 3190237353
[    7.249524] md: raid6 personality registered for level 6
[    7.249526] md: raid5 personality registered for level 5
[    7.249527] md: raid4 personality registered for level 4
[    7.304666] md: raid10 personality registered for level 10
[    7.356352] md: linear personality registered for level -1
[    7.408007] md: multipath personality registered for level -4
[    7.470443] JFS: nTxBlock = 8192, nTxLock = 65536
[    7.539888] RPC: Registered named UNIX socket transport module.
[    7.539890] RPC: Registered udp transport module.
[    7.539891] RPC: Registered tcp transport module.
[    7.539892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.603940] fuse init (API version 7.22)
[    7.658038] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.658040] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.722727] pps_core: LinuxPPS API ver. 1 registered
[    7.722729] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[e-mail]>
[    7.724221] PTP clock support registered
[    7.730088] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    7.789331] Loading iSCSI transport class v2.0-870.
[    7.918066] usb 7-1: New USB device found, idVendor=0001, idProduct=0000
[    7.918070] usb 7-1: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[    7.918072] usb 7-1: Product: ATCL FOR UPS
[    7.918074] usb 7-1: Manufacturer: ATCL FOR UPS
[    7.918075] usb 7-1: SerialNumber: ATCL FOR UPS
[    7.943302] hid-generic 0003:0001:0000.0001: hiddev0,hidraw0: USB HID v1.11 Device [ATCL FOR UPS ATCL FOR UPS] on usb-0000:00:1d.1-1/input0
[    8.430024] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[    8.611060] usb 7-2: New USB device found, idVendor=046d, idProduct=c517
[    8.611063] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.611066] usb 7-2: Product: USB Receiver
[    8.611068] usb 7-2: Manufacturer: Logitech
[    8.628451] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3
[    8.628666] logitech 0003:046D:C517.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[    8.660141] logitech 0003:046D:C517.0003: fixing up Logitech keyboard report descriptor
[    8.660802] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input4
[    8.661151] logitech 0003:046D:C517.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[   11.616700] kjournald starting.  Commit interval 5 seconds
[   11.616917] EXT3-fs (sda3): mounted filesystem with ordered data mode
[   12.249937] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX +IMA -SYSVINIT -LIBCRYPTSETUP -GCRYPT +ACL -XZ +SECCOMP -APPARMOR)
[   12.250103] systemd[1]: Detected architecture 'x86-64'.
[   12.577943] NET: Registered protocol family 10
[   12.578216] systemd[1]: Inserted module 'ipv6'
[   12.578900] systemd[1]: Set hostname to <webandhardware>.
[   13.198001] systemd-fstab-generator[14188]: Checking was requested for /dev/sdc1, but fsck.ntfs-3g cannot be used: No such file or directory
[   13.204322] systemd-fstab-generator[14188]: Checking was requested for /dev/sde1, but fsck.ntfs-3g cannot be used: No such file or directory
[   13.210550] systemd-fstab-generator[14188]: Checking was requested for /dev/sdd1, but fsck.ntfs-3g cannot be used: No such file or directory
[   13.216496] systemd-fstab-generator[14188]: Checking was requested for /dev/sdb1, but fsck.ntfs-3g cannot be used: No such file or directory
[   13.222303] systemd-fstab-generator[14188]: Checking was requested for /dev/sdf1, but fsck.ntfs-3g cannot be used: No such file or directory
[   14.176719] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   14.176775] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.176786] systemd[1]: Starting Remote File Systems.
[   14.182779] systemd[1]: Reached target Remote File Systems.
[   14.182796] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   14.182830] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   14.182850] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   14.189207] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   14.189221] systemd[1]: Expecting device dev-sda2.device...
[   14.195480] systemd[1]: Expecting device dev-sdc1.device...
[   14.201621] systemd[1]: Expecting device dev-sde1.device...
[   14.207722] systemd[1]: Expecting device dev-sdd1.device...
[   14.213727] systemd[1]: Expecting device dev-sdb1.device...
[   14.219638] systemd[1]: Expecting device dev-sdf1.device...
[   14.225440] systemd[1]: Starting Root Slice.
[   14.232910] systemd[1]: Created slice Root Slice.
[   14.232923] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   14.238931] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.238941] systemd[1]: Starting Delayed Shutdown Socket.
[   14.244858] systemd[1]: Listening on Delayed Shutdown Socket.
[   14.244872] systemd[1]: Starting udev Kernel Socket.
[   14.250688] systemd[1]: Listening on udev Kernel Socket.
[   14.250701] systemd[1]: Starting udev Control Socket.
[   14.256479] systemd[1]: Listening on udev Control Socket.
[   14.256489] systemd[1]: Starting User and Session Slice.
[   14.262336] systemd[1]: Created slice User and Session Slice.
[   14.262349] systemd[1]: Starting Journal Socket.
[   14.268265] systemd[1]: Listening on Journal Socket.
[   14.268283] systemd[1]: Starting System Slice.
[   14.274003] systemd[1]: Created slice System Slice.
[   14.274026] systemd[1]: Mounted Huge Pages File System.
[   14.274095] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   14.280226] systemd[1]: Mounting POSIX Message Queue File System...
[   14.286442] systemd[1]: Starting udev Coldplug all Devices...
[   14.292648] systemd[1]: Mounted Debug File System.
[   14.292675] systemd[1]: Starting system-getty.slice.
[   14.298732] systemd[1]: Created slice system-getty.slice.
[   14.298760] systemd[1]: Starting Collect Read-Ahead Data...
[   14.305067] systemd[1]: Starting Journal Service...
[   14.317270] systemd[1]: Started Journal Service.
[   15.353308] systemd-udevd[15009]: starting version 212
[   16.546090] ACPI: Requesting acpi_cpufreq
[   16.698129] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   16.698210] ACPI: Power Button [PWRB]
[   16.698279] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   16.698397] ACPI: Power Button [PWRF]
[   17.007532] sky2: driver version 1.30
[   17.007667] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[   17.007727] sky2 0000:06:00.0: irq 49 for MSI/MSI-X
[   17.008079] sky2 0000:06:00.0 eth0: addr 00:22:15:78:d8:99
[   17.008143] sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3
[   17.008199] sky2 0000:07:00.0: irq 50 for MSI/MSI-X
[   17.008489] sky2 0000:07:00.0 eth1: addr 00:22:15:78:d8:9a
[   17.008555] sky2 0000:08:00.0: Yukon-2 EC Ultra chip revision 3
[   17.008613] sky2 0000:08:00.0: irq 51 for MSI/MSI-X
[   17.008887] sky2 0000:08:00.0 eth2: addr 00:22:15:78:d8:9b
[   17.008959] sky2 0000:09:00.0: Yukon-2 EC Ultra chip revision 3
[   17.009015] sky2 0000:09:00.0: irq 52 for MSI/MSI-X
[   17.009277] sky2 0000:09:00.0 eth3: addr 00:22:15:78:d8:9c
[   17.214858] rtc_cmos 00:02: RTC can wake from S4
[   17.215016] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[   17.215042] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   17.286702] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[   17.337273] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   17.354969] Floppy drive(s): fd0 is 1.44M
[   17.373646] FDC 0 is a post-1991 82077
[   17.518346] [drm] Initialized drm 1.1.0 20060810
[   17.557041] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20130725/utaddress-251)
[   17.557043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.512782] nvidia: module license 'NVIDIA' taints kernel.
[   18.519250] Disabling lock debugging due to kernel taint
[   18.541923] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   18.542243] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   18.542254] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  337.25  Tue May 27 11:05:28 PDT 2014
[   18.921550] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[   18.993672] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[   19.024805] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[   19.025279] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[   19.025802] microcode: Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
[   19.231786] usblp 2-6:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x0924 pid 0x3D69
[   19.231846] usbcore: registered new interface driver usblp
[   19.568750] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   19.575884] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   19.576067] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   19.576241] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   19.576422] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   19.576597] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   19.576773] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   19.576956] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   19.577136] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   19.577955] hda_intel: Disabling MSI
[   19.722108] uvcvideo: Unable to create debugfs directory
[   19.725941] set resolution quirk: cval->res = 384
[   19.726277] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
[   19.726336] usbcore: registered new interface driver snd-usb-audio
[   19.740509] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input17
[   19.740799] usbcore: registered new interface driver uvcvideo
[   19.740801] USB Video Class driver (1.1.1)
[   20.120371] nvidia 0000:01:00.0: irq 54 for MSI/MSI-X
[   20.701557] NVRM: Your system is not currently configured to drive a VGA console
[   20.708775] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   20.716106] NVRM: requires the use of a text-mode VGA console. Use of other console
[   20.723571] NVRM: drivers including, but not limited to, vesafb, may result in
[   20.731071] NVRM: corruption and stability problems, and is not supported.
[   21.214039] Adding 4199420k swap on /dev/sda2.  Priority:-1 extents:1 across:4199420k 
[   25.870234] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[   25.870360] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[   25.870469] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[   25.870574] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[   91.601558] usb 1-3: USB disconnect, device number 2
[  134.720378] systemd-readahead[14198]: Failed to open pack file: Read-only file system
[  454.750022] usb 1-3: new high-speed USB device number 4 using ehci-pci
[  454.903096] usb 1-3: New USB device found, idVendor=04e8, idProduct=6860
[  454.903101] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  454.903103] usb 1-3: Product: SAMSUNG_Android
[  454.903105] usb 1-3: Manufacturer: SAMSUNG
[  454.903107] usb 1-3: SerialNumber: ab33572c
[  655.572647] EXT3-fs (sda3): using internal journal
[  656.364270] systemd-journald[14199]: Received request to flush runtime journal from PID 1
[  662.928420] sky2 0000:06:00.0 eth0: enabling interface
[  662.928495] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  662.937550] sky2 0000:07:00.0 eth1: enabling interface
[  662.937622] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  662.950847] sky2 0000:08:00.0 eth2: enabling interface
[  662.950919] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  662.960722] sky2 0000:09:00.0 eth3: enabling interface
[  662.960797] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[  663.418575] usblp0: removed
[  663.419938] usblp 2-6:1.1: usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x0924 pid 0x3D69
[  664.937974] nvidia 0000:01:00.0: irq 54 for MSI/MSI-X
[  665.272029] sky2 0000:06:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[  665.272048] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  667.721530] systemd-journald[14199]: Failed to read ACL on /var/log/journal/ec6ad4da567eb8498aabf19a00000199/user-104.journal, ignoring: Operation not supported
[  785.509230] systemd-journald[14199]: Failed to read ACL on /var/log/journal/ec6ad4da567eb8498aabf19a00000199/user-1004.journal, ignoring: Operation not supported
[  795.941147] ISO 9660 Extensions: Microsoft Joliet Level 3
[  795.944755] ISO 9660 Extensions: RRIP_1991A