log file from attempted boot of 2004.0 in terminal mode

gentoo linux 2004_0 boot log.txt (text/plain), 7.40 KB, created by Ken VanDeWater on 2004-03-08 19:25:35 UTC

gentoo
Loading initial ramdisk....

Remapping the kernel... done.
Booting Linux...
PROMLIB: Sun IEEE Boot Prom 4.0.12 2003/06/04 15:13
Linux version 2.4.24-sparc-r2-up (root@ayanami) (gcc version 3.2.3 20030422 (Gen
too Linux 1.4 @PV@)) #1 Thu Feb 26 13:42:08 Local time zone must be set--see zic
 manu
ARCH: SUN4U
Ethernet address: 00:c0:07:06:10:68
On node 0 totalpages: 261334
zone(0): 458579 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f0076f7c,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zisofs c
droot
Calibrating delay loop... 1294.33 BogoMIPS
Memory: 2047616k available (2120k kernel code, 552k data, 168k init) [fffff80000
000000,00000000dfea6000]
Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes)
Inode cache hash table entries: 131072 (order: 8, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at c0000000 [20000000]
PCI-IRQ: Routing bus[ 2] slot[ 8] map[0] to INO[20]
PCI-IRQ: Routing bus[ 2] slot[ 8] map[0] to INO[20]
PCI0(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[0f]
PCI-IRQ: Routing bus[ 1] slot[ 5] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 1] slot[ 5] map[0] to INO[26]
PCI-IRQ: Routing bus[ 1] slot[ 8] map[0] to INO[23]
PCI-IRQ: Routing bus[ 1] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 1] slot[ c] map[0] to INO[1f]
PCI-IRQ: Routing bus[ 1] slot[ c] map[0] to INO[24]
PCI-IRQ: Routing bus[ 1] slot[ d] map[0] to INO[0c]
PCI0(PBMB): Bus running at 33MHz
isa0: [dma -> (floppy) (parallel)] [power] [serial] [serial]
ebus0: [flashprom] [eeprom] [idprom]
PCIO serial driver version 1.54
su(serial) at 0x1fe020003f8 (tty 0 irq 12,7eb) is a 16550A
su(serial) at 0x1fe020002e8 (tty 1 irq 12,7eb) is a 16550A
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([e-mail])
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
rtc_init: no PC rtc found
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
sungem.c:v0.97 3/20/02 David S. Miller ([e-mail])
eth%d: MII PHY ID: 437420 Enable Semiconductor
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:c0:07:06:10:69 
eth%d: MII PHY ID: 437420 Enable Semiconductor
eth1: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:c0:07:06:10:68 
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 01:0d.0
ALI15X3: chipset revision 195
ALI15X3: 100% native mode on irq 4,7cc
    ide0: BM-DMA at 0x1fe02000420-0x1fe02000427, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1fe02000428-0x1fe0200042f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPG3204AT E, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: CD-ROM 52X L, ATAPI CD/DVD-ROM drive
ide0 at 0x1fe02000400-0x1fe02000407,0x1fe0200041a on irq 4,7cc
ide1 at 0x1fe02000410-0x1fe02000417,0x1fe0200040a on irq 4,7cc
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=39714/16/63, UDMA(66)
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p8
SCSI subsystem driver Revision: 1.00
sym.2.8.0: setting PCI_COMMAND_INVALIDATE.
sym.2.8.1: setting PCI_COMMAND_INVALIDATE.
sym0: <896> rev 0x7 on pci bus 2 device 8 function 0 irq 4,7e0
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
sym1: <896> rev 0x7 on pci bus 2 device 8 function 1 irq 4,7e0
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
scsi1 : sym-2.1.17a
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-ohci.c: USB OHCI at membase 0x1ffe5000000, IRQ 9,7e6
host/usb-ohci.c: usb-01:05.3, Sun Microsystems Computer Corp. RIO USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
host/usb-ohci.c: USB OHCI at membase 0x1ffe2000000, IRQ 9,7e4
host/usb-ohci.c: usb-01:0c.3, Sun Microsystems Computer Corp. RIO USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[e-mail]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 893k freed
VFS: Mounted root (ext2 filesystem) readonly.
 Gentoo initrd startup...
STEP 1: Command-line parsing
STEP 2: Module loading
STEP 3: Mounting necessary filesystems per boot options
Started device management daemon v1.3.25 for /newroot/dev
---- Attempting to mount CD -- /newroot/dev/cdroms/cdrom0
---- CD medium found on /newroot/dev/cdroms/cdrom0
STEP 4: Determining root device
STEP 5: Finishing up
STEP 5a: filling tmpfs filesystem
STEP 5a2: filling filesystem
STEP 5c: redirect console
STEP 6: pivot_root and exec/chroot real init
STEP 6a: clean up mounts
umount: /tmp/.initrd/dev: not mounted
COULD NOT UMOUNT tmp/.initrd/dev !!!
UMOUNTING /tmp/.initrd
INIT: starting /sbin/init root=/dev/ram0 init=/linuxrc looptype=zisofs loop=/zis
ofs cdroot
INIT: version 2.84 booting

Gentoo Linux; http://www.gentoo.org/
 Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the GPL

 * Mounting proc at /proc...  [ ok ]
 * Starting devfsd...Started device management daemon v1.3.25 for /dev
  [ ok ]
 * Activating (possible) swap...  [ ok ]
 * Remounting root filesystem read/write...  [ ok ]
 * Setting hostname to livecd...  [ ok ]
 * Mounting local filesystems...  [ ok ]
 * Mounting USB device filesystem (usbfs)...  [ ok ]
 * Activating (possibly) more swap...  [ ok ]
 * Updating inittab...  [ ok ]
 * Caching service dependencies...  [ ok ]
 * Setting system clock to hardware clock [UTC]...  [ ok ]
 * Configuring kernel parameters...  [ ok ]
 * Updating environment...  [ ok ]
 * Cleaning /var/lock, /var/run...  [ ok ]
 * Cleaning /tmp directory...  [ ok ]
 * Bringing lo up...  [ ok ]
 * Initializing random number generator...  [ ok ]
INIT: Entering runlevel: 3
 * Starting metalog...  [ ok ]
 * Starting local...  [ ok ]
INIT: Id "c1" respawning too fast: disabled for 5 minutes
INIT: Id "c2" respawning too fast: disabled for 5 minutes
INIT: Id "c3" respawning too fast: disabled for 5 minutes
INIT: Id "c5" respawning too fast: disabled for 5 minutes
INIT: Id "c4" respawning too fast: disabled for 5 minutes
INIT: Id "c6" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel