set.out

set.out (text/plain), 194.48 KB, created by Dustin Polke on 2011-03-15 12:47:23 UTC

A=libsoup-2.32.2.tar.bz2
AA=libsoup-2.32.2.tar.bz2
ABI=sparc32
ACCEPT_LICENSE=LGPL-2
ALSA_CARDS=
ALSA_PCM_PLUGINS='adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol'
APACHE2_MODULES='auth_basic auth_core authn_file authz_core authz_host     authz_user dav dir log_config mime unixd'
ARCH=sparc
AT_M4DIR=
AUTOTOOLS_AUTO_DEPEND=yes
AUTOTOOLS_DEPEND='|| ( =sys-devel/automake-1.11*  ) >=sys-devel/autoconf-2.61 >=sys-devel/libtool-2.2.6b'
BAD=$'\E[31;01m'
BASH=/bin/bash
BASHOPTS=cmdhist:expand_aliases:extdebug:extquote:force_fignore:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath
BASHPID=20097
BASH_ALIASES=()
BASH_ARGC=([0]="0" [1]="1" [2]="1" [3]="0" [4]="0" [5]="1")
BASH_ARGV=([0]="src_test" [1]="src_test" [2]="test")
BASH_CMDS=()
BASH_LINENO=([0]="56" [1]="688" [2]="1117" [3]="2249" [4]="2342" [5]="0")
BASH_SOURCE=([0]="/home/portage/portage/net-libs/libsoup-2.32.2/temp/environment" [1]="/usr/lib32/portage/bin/ebuild.sh" [2]="/usr/lib32/portage/bin/ebuild.sh" [3]="/usr/lib32/portage/bin/ebuild.sh" [4]="/usr/lib32/portage/bin/ebuild.sh" [5]="/usr/lib32/portage/bin/ebuild.sh")
BASH_VERSINFO=([0]="4" [1]="1" [2]="9" [3]="2" [4]="release" [5]="sparc-unknown-linux-gnu")
BASH_VERSION='4.1.9(2)-release'
BRACKET=$'\E[34;01m'
BUILD_PREFIX=/home/portage/portage
CAMERAS=ptp2
CATEGORY=net-libs
CBUILD=sparc-unknown-linux-gnu
CCACHE_DIR=/usr/ccache
CCACHE_SIZE=1G
CDEFINE_default=__unix__
CDEFINE_sparc32='!__arch64__'
CDEFINE_sparc64=__arch64__
CFLAGS='-O2 -mcpu=ultrasparc -pipe -ggdb'
CFLAGS_default=
CFLAGS_sparc32=
CFLAGS_sparc64=-m64
CHOST=sparc-unknown-linux-gnu
CHOST_default=sparc-unknown-linux-gnu
CHOST_sparc32=sparc-unknown-linux-gnu
CHOST_sparc64=sparc64-unknown-linux-gnu
COLLECTD_PLUGINS='df interface irq load memory rrdtool swap syslog'
COLS=189
CONF_PREFIX=/usr
CROSSCOMPILE_OPTS=
CTARGETS_BINUTILS='sparc-unknown-linux-gnu sparc64-unknown-linux-gnu'
CTARGET_default=sparc-unknown-linux-gnu
CTARGET_sparc32=sparc-unknown-linux-gnu
CVS_RSH=ssh
CXXFLAGS='-O2 -mcpu=ultrasparc -pipe -ggdb'
D=/home/portage/portage/net-libs/libsoup-2.32.2/image/
DEFAULT_ABI=sparc32
DEFINED_PHASES=' compile configure install postinst postrm preinst prepare setup test unpack'
DEPEND=$'>=dev-libs/glib-2.21.3\n\t>=dev-libs/libxml2-2\n\tintrospection? ( >=dev-libs/gobject-introspection-0.9.5 )\n\tssl? ( >=net-libs/gnutls-2.1.7 )\n\t>=dev-util/pkgconfig-0.9\n\t>=dev-util/gtk-doc-am-1.10\n\tdoc? ( >=dev-util/gtk-doc-1.10 )  || ( =sys-devel/automake-1.11*  ) >=sys-devel/autoconf-2.61 >=sys-devel/libtool-2.2.6b >=sys-apps/sed-4'
DESCRIPTION='An HTTP library implementation in C'
DESTTREE=/usr
DIROPTIONS=-m0755
DIRSTACK=()
DISTDIR=/home/portage/portage/net-libs/libsoup-2.32.2/distdir
DOCS='AUTHORS NEWS README'
EAPI=3
EBUILD=/usr/portage/net-libs/libsoup/libsoup-2.32.2.ebuild
EBUILD_FORCE_TEST=1
EBUILD_MASTER_PID=20097
EBUILD_PHASE=test
EBUILD_SH_ARGS=test
ECLASSDIR=/usr/portage/eclass
ECLASS_DEPTH=0
ECONF_SOURCE=.
ED=/home/portage/portage/net-libs/libsoup-2.32.2/image/
EDITOR=vim
ELIBC=glibc
ELTCONF=
ELT_APPLIED_PATCHES=' 2.2 1.5.6 2.2.6'
ELT_PATCH_DIR=/usr/portage/eclass/ELT-patches
ENDCOL=$'\E[A\E[181C'
EPATCH_EXCLUDE=
EPATCH_FORCE=no
EPATCH_MULTI_MSG='Applying various patches (bugfixes/updates) ...'
EPATCH_OPTS='-g0 -E --no-backup-if-mismatch'
EPATCH_SINGLE_MSG=
EPATCH_SOURCE=/home/portage/portage/net-libs/libsoup-2.32.2/work/patch
EPATCH_SUFFIX=patch.bz2
EPREFIX=
EROOT=/
EUID=250
EXEOPTIONS=-m0755
FCFLAGS=
FEATURES='assume-digests binpkg-logs ccache collision-protect distlocks fixlafiles fixpackages multilib-strict news parallel-fetch protect-owned sandbox sfperms splitdebug strict test unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox'
FETCHCOMMAND_SSH='bash -c "x=\${2#ssh://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port=22 ; exec rsync --rsh=\"ssh -p\${port}\" -avP \"\${host}:/\${x#*/}\" \"\$1\"" rsync "${DISTDIR}/${FILE}" "${URI}"'
FFLAGS=
FILESDIR=/usr/portage/net-libs/libsoup/files
FUNCNAME=([0]="src_test" [1]="qa_call" [2]="ebuild_phase" [3]="dyn_test" [4]="ebuild_main" [5]="main")
G2CONF=$'\n\t\t--disable-static\n\t\t--without-gnome\n\t\t--with-apache-module-dir=/home/portage/portage/net-libs/libsoup-2.32.2/temp\n\t\t--disable-introspection\n\t\t--enable-ssl --disable-gtk-doc'
GCONFTOOL_BIN=/usr/bin/gconftool-2
GCONF_DEBUG=yes
GDK_USE_XFT=1
GLIB_COMPILE_SCHEMAS=/usr/bin/glib-compile-schemas
GNOME_TARBALL_SUFFIX=bz2
GOOD=$'\E[32;01m'
GPSD_PROTOCOLS='ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx'
GROUPS=()
GSETTINGS_BACKEND=gconf
GTK_UPDATE_ICON_CACHE=/usr/bin/gtk-update-icon-cache
HILITE=$'\E[36m'
HOME=/home/portage/portage/net-libs/libsoup-2.32.2/homedir
HOMEPAGE=http://live.gnome.org/LibSoup
HOSTNAME=hfpc43.hf.et-inf.uni-siegen.de
HOSTTYPE=sparc
IFS=$' \t\n'
INHERITED='gnome2 toolchain-funcs portability multilib gnome2-utils libtool gnome.org fdo-mime autotools eutils'
INPUT_DEVICES=
INSDESTTREE=
INSOPTIONS=-m0644
IUSE='debug doc +introspection ssl test  debug'
I_READ_THE_MULTILIB_MIGRATION_GUIDE=yes
KERNEL=linux
KERNEL_ABI=sparc64
KEYWORDS='alpha amd64 arm hppa ia64 ~ppc ~ppc64 sh sparc x86 ~x86-fbsd'
KV=2.6.36-gentoo-r5
LCD_DEVICES=
LDFLAGS='-Wl,-O1 -Wl,--as-needed'
LDFLAGS_default=
LDFLAGS_sparc32=
LDFLAGS_sparc64='-m elf64_sparc'
LD_PRELOAD=libsandbox.so
LESS='-R -M --shift 5'
LESSOPEN='|lesspipe.sh %s'
LIBDIR_amd64=lib64
LIBDIR_amd64_fbsd=lib64
LIBDIR_default=lib
LIBDIR_ppc=lib32
LIBDIR_ppc64=lib64
LIBDIR_sparc32=lib32
LIBDIR_sparc64=lib64
LIBDIR_x86=lib32
LIBDIR_x86_fbsd=lib32
LIBOPTIONS=-m0644
LICENSE=LGPL-2
LINGUAS='en de'
LOGNAME=root
LS_COLORS='rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.pdf=00;32:*.ps=00;32:*.txt=00;32:*.patch=00;32:*.diff=00;32:*.log=00;32:*.tex=00;32:*.doc=00;32:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:'
MACHTYPE=sparc-unknown-linux-gnu
MAIL=/var/mail/serveradm
MAKEOPTS=-j3
MANLINGUAS=de
MOPREFIX=libsoup
MULTILIB_ABIS='sparc32 sparc64'
MULTILIB_STRICT_DENY='64-bit.*shared object'
MULTILIB_STRICT_DIRS='/lib32 /lib /usr/lib32 /usr/lib /usr/kde/*/lib32 /usr/kde/*/lib /usr/qt/*/lib32 /usr/qt/*/lib /usr/X11R6/lib32 /usr/X11R6/lib'
MULTILIB_STRICT_EXEMPT='(perl5|gcc|gcc-lib|binutils|eclipse-3|debug|portage)'
MY_ENV=libsoup-2.32.2
NETBEANS='apisupport cnd groovy gsf harness ide identity j2ee java mobility nb php profiler soa visualweb webcommon websvccommon xml'
NOCOLOR=no
NORMAL=$'\E[0m'
OLDIFS=$' \t\n'
OLDPWD=/home/portage/portage/net-libs/libsoup-2.32.2
OPENGL_PROFILE=xorg-x11
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
OVERLAY_ROOT=/usr/local/portage
P=libsoup-2.32.2
PAGER=/usr/bin/less
PATH=/usr/lib/ccache/bin:/usr/lib32/portage/bin/ebuild-helpers:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/bin:/usr/sparc-unknown-linux-gnu/gcc-bin/4.4.5
PDEPEND=' '
PF=libsoup-2.32.2
PHP_TARGETS=php5-3
PIPESTATUS=([0]="0")
PKGDIR=/usr/portage/packages
PKGUSE=
PKG_CONFIG_PATH=/usr/lib32/pkgconfig
PKG_LOGDIR=/home/portage/portage/net-libs/libsoup-2.32.2/temp/logging
PKG_TMPDIR=/home/portage/binpkgs
PM_EBUILD_HOOK_DIR=/etc/portage/env
PN=libsoup
PORTAGE_ACTUAL_DISTDIR=/usr/portage/distfiles
PORTAGE_ARCHLIST='ppc sparc64-freebsd ppc-openbsd x86-openbsd ppc64 x86-winnt x86-fbsd ppc-aix alpha arm x86-freebsd s390 amd64 arm-linux x86-macos x64-openbsd ia64-hpux hppa x86-netbsd x86-cygwin amd64-linux ia64-linux x86 sparc-solaris x64-freebsd sparc64-solaris x86-linux x64-macos sparc m68k-mint ia64 mips ppc-macos x86-interix hppa-hpux amd64-fbsd x64-solaris mips-irix m68k sh x86-solaris sparc-fbsd'
PORTAGE_BASHRC=/etc/portage/bashrc
PORTAGE_BASHRCS_SOURCED=1
PORTAGE_BIN_PATH=/usr/lib32/portage/bin
PORTAGE_BUILDDIR=/home/portage/portage/net-libs/libsoup-2.32.2
PORTAGE_BZIP2_COMMAND=bzip2
PORTAGE_COLORMAP=$'GOOD=$\'\E[32;01m\'\nWARN=$\'\E[33;01m\'\nBAD=$\'\E[31;01m\'\nHILITE=$\'\E[36m\'\nBRACKET=$\'\E[34;01m\''
PORTAGE_COMPRESS=
PORTAGE_COMPRESS_EXCLUDE_SUFFIXES='css gif htm[l]? jp[e]?g js pdf png'
PORTAGE_CONFIGROOT=/
PORTAGE_DEPCACHEDIR=/var/cache/edb/dep
PORTAGE_DOCOMPRESS=([0]="/usr/share/doc" [1]="/usr/share/info" [2]="/usr/share/man")
PORTAGE_DOCOMPRESS_SKIP=([0]="/usr/share/doc/libsoup-2.32.2/html")
PORTAGE_FEATURES='assume-digests binpkg-logs ccache collision-protect distlocks fixlafiles fixpackages multilib-strict news parallel-fetch protect-owned sandbox sfperms splitdebug strict test unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox'
PORTAGE_GID=250
PORTAGE_INST_GID=0
PORTAGE_INST_UID=0
PORTAGE_IPC_DAEMON=1
PORTAGE_IUSE='^(3dfx|3dnow|3dnowext|acpi|ada|adabas|afs|aio|alpha|alsa\_cards\_ad1816a|alsa\_cards\_ad1848|alsa\_cards\_adlib|alsa\_cards\_als100|alsa\_cards\_aoa|alsa\_cards\_aoa\-fabric\-layout|alsa\_cards\_aoa\-onyx|alsa\_cards\_aoa\-soundbus|alsa\_cards\_aoa\-soundbus\-i2s|alsa\_cards\_aoa\-tas|alsa\_cards\_aoa\-toonie|alsa\_cards\_armaaci|alsa\_cards\_at91\-soc|alsa\_cards\_at91\-soc\-eti\-b1\-wm8731|alsa\_cards\_au1x00|alsa\_cards\_azt2320|alsa\_cards\_cmi8330|alsa\_cards\_cs4231|alsa\_cards\_cs4231\-lib|alsa\_cards\_cs4232|alsa\_cards\_cs4236|alsa\_cards\_dt019x|alsa\_cards\_es1688|alsa\_cards\_es18xx|alsa\_cards\_es968|alsa\_cards\_gusclassic|alsa\_cards\_gusextreme|alsa\_cards\_gusmax|alsa\_cards\_harmony|alsa\_cards\_hdsp|alsa\_cards\_hdspm|alsa\_cards\_interwave|alsa\_cards\_interwave\-stb|alsa\_cards\_miro|alsa\_cards\_msnd\-pinnacle|alsa\_cards\_opl3sa2|alsa\_cards\_opti92x\-ad1848|alsa\_cards\_opti92x\-cs4231|alsa\_cards\_opti93x|alsa\_cards\_powermac|alsa\_cards\_pxa2xx\-i2sound|alsa\_cards\_pxa2xx\-soc|alsa\_cards\_pxa2xx\-soc\-corgi|alsa\_cards\_pxa2xx\-soc\-poodle|alsa\_cards\_pxa2xx\-soc\-spitz|alsa\_cards\_pxa2xx\-soc\-tosa|alsa\_cards\_sa11xx\-uda1341ts|alsa\_cards\_sb16|alsa\_cards\_sb16\_csp|alsa\_cards\_sb8|alsa\_cards\_sbawe|alsa\_cards\_sgalaxy|alsa\_cards\_sscape|alsa\_cards\_sun\-amd7930|alsa\_cards\_sun\-dbri|alsa\_cards\_wavefront|altivec|amd|amd64|amd64\-fbsd|amd64\-linux|apm|aqua|arm|arm\-linux|ayatana|barcode|battery|beagle|birdstep|bluetooth|bootstrap|bri|brltty|build|capi|celt|chipcard|chm|cle266|clisp|clvm|cman|cmucl|commercial|coreaudio|cpufreq|crosscompile\_opts\_.*|d|dar32|dar64|db2|dbmaker|debug|dell|directfb|djbfft|dmi|dmraid|doc|doomsday|dvb|dxr3|ebook|elibc\_AIX|elibc\_Darwin|elibc\_DragonFly|elibc\_FreeBSD|elibc\_HPUX|elibc\_IRIX|elibc\_Interix|elibc\_NetBSD|elibc\_OpenBSD|elibc\_SunOS|elibc\_.*|elibc\_glibc|elibc\_mintlib|elibc\_uclibc|empress|empress\-bcs|emul\-linux\-x86|epos|esoob|fdftk|filepro|firebird|fixed\-point|florz|freetts|frei0r|frontbase|galago|glitz|gluon|gme|google\-gadgets|gtk3|gulm|hardened|hbci|hdf|hdf5|hppa|hppa\-hpux|hyperwave\-api|i8x0|ia64|ia64\-hpux|ia64\-linux|ibm|ifp|indi|informix|ingres|input\_devices\_synaptics|input\_devices\_virtualbox|input\_devices\_vmmouse|input\_devices\_wacom|introspection|ipod|ivtv|java|java\-external|java\-internal|jfs|jingle|kde|kdeenablefinal|kdeprefix|kernel\_AIX|kernel\_Darwin|kernel\_FreeBSD|kernel\_HPUX|kernel\_IRIX|kernel\_Interix|kernel\_NetBSD|kernel\_OpenBSD|kernel\_SunOS|kernel\_.*|kernel\_freemint|kernel\_linux|kqemu|kqueue|krb4|laptop|lcd\_devices\_g15|lcd\_devices\_graphlcd|lcd\_devices\_luise|lcd\_devices\_svga|lcd\_devices\_ula200|lensfun|libburn|libedit|libvirt|lilo|lirc|lm\_sensors|lqr|m68k|m68k\-mint|macbook|mips|mips\-irix|mmx|mmxext|mod|mod\_wsgi|modplug|mono|mpe\-sdk|mpm\-peruser|mtp|multilib|musepack|mythtv|mzscheme|n32|n64|netbeans|networkmanager|nforce2|njb|nvidia|nvram|nvtv|oci8|oci8\-instant\-client|openct|oracle|oracle7|osp|ots|pam\_console|pbbuttonsd|pbs|pcmcia|pdfannotextractor|pfpro|phonon|pike|pkcs11|pm\-utils|ppc|ppc64|ppc\-aix|ppc\-macos|ppc\-openbsd|ppcsha1|prefix|ps3|psyco|pvm|pyste|quvi|rar|real|reiser4|reiserfs|resperl|romio|rtmp|ruby\_targets\_jruby|ruby\_targets\_ree18|ruby\_targets\_ruby19|s390|sane\_backends\_canon\_pp|sane\_backends\_hpsj5s|sane\_backends\_mustek\_pp|sane\_backends\_qcam|schroedinger|selinux|sh|solid|sparc|sparc64\-freebsd|sparc64\-solaris|sparc\-fbsd|sparc\-solaris|srtp|sse|sse2|sse3|sse4|sse4a|sse5|ssl|ssse3|svga|sybase|sybase\-ct|tcc|test|tokyocabinet|topal|trusted|uclibc|ukcid|uml|userland\_BSD|userland\_GNU|userland\_.*|v4l2|vaapi|valgrind|video\_cards\_apm|video\_cards\_ark|video\_cards\_ast|video\_cards\_chips|video\_cards\_cirrus|video\_cards\_cyrix|video\_cards\_fglrx|video\_cards\_geode|video\_cards\_i128|video\_cards\_i740|video\_cards\_impact|video\_cards\_intel|video\_cards\_neomagic|video\_cards\_newport|video\_cards\_nsc|video\_cards\_nv|video\_cards\_nvidia|video\_cards\_omapfb|video\_cards\_radeonhd|video\_cards\_rendition|video\_cards\_s3|video\_cards\_s3virge|video\_cards\_siliconmotion|video\_cards\_sis|video\_cards\_tga|video\_cards\_trident|video\_cards\_tseng|video\_cards\_vesa|video\_cards\_via|video\_cards\_virtualbox|video\_cards\_vmware|video\_cards\_voodoo|video\_cards\_xgi|voodoo3|vpx|wavelan|webkit|wicd|wifi|wildmidi|win32codecs|wlan|x64\-freebsd|x64\-macos|x64\-openbsd|x64\-solaris|x86|x86\-cygwin|x86\-fbsd|x86\-freebsd|x86\-interix|x86\-linux|x86\-macos|x86\-netbsd|x86\-openbsd|x86\-solaris|x86\-winnt|xfs|xmms2|xvmc|yellownet|zaptel|zoran)$'
PORTAGE_LOG_FILE=/home/portage/portage/net-libs/libsoup-2.32.2/temp/build.log
PORTAGE_MUTABLE_FILTERED_VARS='AA HOSTNAME'
PORTAGE_PYM_PATH=/usr/lib32/portage/pym
PORTAGE_PYTHON=/usr/bin/python2.6
PORTAGE_READONLY_METADATA=$'DEFINED_PHASES DEPEND DESCRIPTION\n\tEAPI HOMEPAGE INHERITED IUSE REQUIRED_USE KEYWORDS LICENSE\n\tPDEPEND PROVIDE RDEPEND RESTRICT SLOT SRC_URI'
PORTAGE_READONLY_VARS=$'D EBUILD EBUILD_PHASE \tEBUILD_SH_ARGS ECLASSDIR EMERGE_FROM FILESDIR MERGE_TYPE \tPM_EBUILD_HOOK_DIR \tPORTAGE_ACTUAL_DISTDIR PORTAGE_ARCHLIST PORTAGE_BASHRC  \tPORTAGE_BINPKG_FILE PORTAGE_BINPKG_TAR_OPTS PORTAGE_BINPKG_TMPFILE \tPORTAGE_BIN_PATH PORTAGE_BUILDDIR PORTAGE_BUNZIP2_COMMAND \tPORTAGE_BZIP2_COMMAND PORTAGE_COLORMAP PORTAGE_CONFIGROOT \tPORTAGE_DEBUG PORTAGE_DEPCACHEDIR PORTAGE_EBUILD_EXIT_FILE \tPORTAGE_GID PORTAGE_GRPNAME PORTAGE_INST_GID PORTAGE_INST_UID \tPORTAGE_IPC_DAEMON PORTAGE_IUSE PORTAGE_LOG_FILE \tPORTAGE_MUTABLE_FILTERED_VARS PORTAGE_PYM_PATH PORTAGE_PYTHON \tPORTAGE_READONLY_METADATA PORTAGE_READONLY_VARS \tPORTAGE_REPO_NAME PORTAGE_RESTRICT PORTAGE_SANDBOX_COMPAT_LEVEL \tPORTAGE_SAVED_READONLY_VARS PORTAGE_SIGPIPE_STATUS \tPORTAGE_TMPDIR PORTAGE_UPDATE_ENV PORTAGE_USERNAME \tPORTAGE_VERBOSE PORTAGE_WORKDIR_MODE PORTDIR PORTDIR_OVERLAY \tPROFILE_PATHS REPLACING_VERSIONS REPLACED_BY_VERSION T WORKDIR'
PORTAGE_REPO_NAME=gentoo
PORTAGE_RESTRICT=
PORTAGE_SANDBOX_COMPAT_LEVEL=16
PORTAGE_SAVED_READONLY_VARS='A CATEGORY P PF PN PR PV PVR'
PORTAGE_SIGPIPE_STATUS=141
PORTAGE_TMPDIR=/home/portage
PORTAGE_VERBOSE=1
PORTAGE_WORKDIR_MODE=0700
PORTDIR=/usr/portage
PORTDIR_OVERLAY=
PPID=20059
PR=r0
PRELINK_PATH_MASK=/opt:/usr/lib32/libfreebl3.so:/usr/lib32/libnssdbm3.so:/usr/lib32/libsoftokn3.so
PREROOTPATH=
PROFILE_ARCH=sparc64
PROFILE_ONLY_VARIABLES='ARCH ELIBC KERNEL USERLAND'
PROFILE_PATHS=$'/usr/portage/profiles/base\n/usr/portage/profiles/default/linux\n/usr/portage/profiles/arch/base\n/usr/portage/profiles/arch/sparc\n/usr/portage/profiles/default/linux/sparc\n/usr/portage/profiles/default/linux/sparc/experimental\n/usr/portage/profiles/releases\n/usr/portage/profiles/releases/10.0\n/usr/portage/profiles/features/multilib\n/usr/portage/profiles/default/linux/sparc/experimental/multilib\n/usr/portage/profiles/targets/server\n/usr/portage/profiles/default/linux/sparc/experimental/multilib/server\n/etc/portage/profile'
PROPERTIES=
PROVIDE=
PS4='+ '
PV=2.32.2
PVP=([0]="2" [1]="32" [2]="2")
PVR=2.32.2
PWD=/home/portage/portage/net-libs/libsoup-2.32.2/work/libsoup-2.32.2
PYTHONDONTWRITEBYTECODE=1
QA_INTERCEPTORS='autoconf automake aclocal libtoolize'
RC_DEFAULT_INDENT=2
RC_DOT_PATTERN=
RC_ENDCOL=yes
RC_INDENTATION=
RDEPEND=$'>=dev-libs/glib-2.21.3\n\t>=dev-libs/libxml2-2\n\tintrospection? ( >=dev-libs/gobject-introspection-0.9.5 )\n\tssl? ( >=net-libs/gnutls-2.1.7 )  '
REQUIRED_USE=' '
RESTRICT=
RESUMECOMMAND_SSH='bash -c "x=\${2#ssh://} ; host=\${x%%/*} ; port=\${host##*:} ; host=\${host%:*} ; [[ \${host} = \${port} ]] && port=22 ; exec rsync --rsh=\"ssh -p\${port}\" -avP \"\${host}:/\${x#*/}\" \"\$1\"" rsync "${DISTDIR}/${FILE}" "${URI}"'
ROOT=/
ROOTPATH=/opt/bin:/usr/sparc-unknown-linux-gnu/gcc-bin/4.4.5
RUBY_TARGETS=
S=/home/portage/portage/net-libs/libsoup-2.32.2/work/libsoup-2.32.2
SANDBOX_ACTIVE=armedandready
SANDBOX_BASHRC=/usr/share/sandbox/sandbox.bashrc
SANDBOX_DEBUG=0
SANDBOX_DEBUG_LOG=/var/log/sandbox/sandbox-debug-20059.log
SANDBOX_DENY=
SANDBOX_LIB=libsandbox.so
SANDBOX_LOG=/var/log/sandbox/sandbox-20059.log
SANDBOX_ON=1
SANDBOX_PID=12446
SANDBOX_PREDICT=/dev/crypto:/home/portage/portage/net-libs/libsoup-2.32.2/homedir:/usr/share/snmp/mibs/.index:/var/cache/fontconfig:/
SANDBOX_READ=/:/dev/stdin:/home/portage:/usr/ccache
SANDBOX_VERBOSE=1
SANDBOX_WRITE=:/dev/console:/dev/fd:/dev/full:/dev/null:/dev/pts/:/dev/pty:/dev/shm:/dev/stderr:/dev/stdout:/dev/tts:/dev/tty:/dev/vc/:/dev/zero:/home/portage:/home/portage/portage/net-libs/libsoup-2.32.2/homedir/.bash_history:/proc/self/fd:/root/.gnome2:/tmp/:/usr/ccache:/usr/lib/cf:/usr/lib/conftest:/usr/lib32/cf:/usr/lib32/conftest:/usr/lib64/cf:/usr/lib64/conftest:/usr/tmp/cf:/usr/tmp/conftest:/var/tmp/
SANE_BACKENDS=
SCROLLKEEPER_DIR=/var/lib/scrollkeeper
SCROLLKEEPER_UPDATE=1
SCROLLKEEPER_UPDATE_BIN=/usr/bin/scrollkeeper-update
SHELL=/bin/false
SHELLOPTS=braceexpand:hashall:interactive-comments
SHLVL=2
SLOT=2.4
SRC_URI=mirror://gnome/sources/libsoup/2.32/libsoup-2.32.2.tar.bz2
SSH_CLIENT='141.99.184.127 49263 22'
SSH_CONNECTION='141.99.184.127 49263 141.99.184.143 22'
SSH_TTY=/dev/pts/0
STAGE1_USE='multilib nptl nptlonly unicode'
STY=23504.pts-0.hfpc43
SYMLINK_LIB=yes
T=/home/portage/portage/net-libs/libsoup-2.32.2/temp
TEMP=/home/portage/portage/net-libs/libsoup-2.32.2/temp
TERM=screen
TERMCAP=$'SC|screen|VT 100/ANSI X3.64 virtual terminal:\\\n\t:DO=\\E[%dB:LE=\\E[%dD:RI=\\E[%dC:UP=\\E[%dA:bs:bt=\\E[Z:\\\n\t:cd=\\E[J:ce=\\E[K:cl=\\E[H\\E[J:cm=\\E[%i%d;%dH:ct=\\E[3g:\\\n\t:do=^J:nd=\\E[C:pt:rc=\\E8:rs=\\Ec:sc=\\E7:st=\\EH:up=\\EM:\\\n\t:le=^H:bl=^G:cr=^M:it#8:ho=\\E[H:nw=\\EE:ta=^I:is=\\E)0:\\\n\t:li#64:co#189:am:xn:xv:LP:sr=\\EM:al=\\E[L:AL=\\E[%dL:\\\n\t:cs=\\E[%i%d;%dr:dl=\\E[M:DL=\\E[%dM:dc=\\E[P:DC=\\E[%dP:\\\n\t:im=\\E[4h:ei=\\E[4l:mi:IC=\\E[%d@:ks=\\E[?1h\\E=:\\\n\t:ke=\\E[?1l\\E>:vi=\\E[?25l:ve=\\E[34h\\E[?25h:vs=\\E[34l:\\\n\t:ti=\\E[?1049h:te=\\E[?1049l:us=\\E[4m:ue=\\E[24m:so=\\E[3m:\\\n\t:se=\\E[23m:mb=\\E[5m:md=\\E[1m:mr=\\E[7m:me=\\E[m:ms:\\\n\t:Co#8:pa#64:AF=\\E[3%dm:AB=\\E[4%dm:op=\\E[39;49m:AX:\\\n\t:vb=\\Eg:G0:as=\\E(0:ae=\\E(B:\\\n\t:ac=\\140\\140aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++,,hhII00:\\\n\t:po=\\E[5i:pf=\\E[4i:Z0=\\E[?3h:Z1=\\E[?3l:k0=\\E[10~:\\\n\t:k1=\\EOP:k2=\\EOQ:k3=\\EOR:k4=\\EOS:k5=\\E[15~:k6=\\E[17~:\\\n\t:k7=\\E[18~:k8=\\E[19~:k9=\\E[20~:k;=\\E[21~:F1=\\E[23~:\\\n\t:F2=\\E[24~:F3=\\E[1;2P:F4=\\E[1;2Q:F5=\\E[1;2R:F6=\\E[1;2S:\\\n\t:F7=\\E[15;2~:F8=\\E[17;2~:F9=\\E[18;2~:FA=\\E[19;2~:kb=^H:\\\n\t:K2=\\EOE:kB=\\E[Z:kF=\\E[1;2B:kR=\\E[1;2A:*4=\\E[3;2~:\\\n\t:*7=\\E[1;2F:#2=\\E[1;2H:#3=\\E[2;2~:#4=\\E[1;2D:%c=\\E[6;2~:\\\n\t:%e=\\E[5;2~:%i=\\E[1;2C:kh=\\E[1~:@1=\\E[1~:kH=\\E[4~:\\\n\t:@7=\\E[4~:kN=\\E[6~:kP=\\E[5~:kI=\\E[2~:kD=\\E[3~:ku=\\EOA:\\\n\t:kd=\\EOB:kr=\\EOC:kl=\\EOD:km:'
TMP=/home/portage/portage/net-libs/libsoup-2.32.2/temp
TMPDIR=/home/portage/portage/net-libs/libsoup-2.32.2/temp
UID=250
USE='elibc_glibc kernel_linux multilib sparc ssl test userland_GNU'
USERLAND=GNU
USE_EINSTALL=
USE_EXPAND='ALSA_CARDS ALSA_PCM_PLUGINS APACHE2_MODULES APACHE2_MPMS CAMERAS COLLECTD_PLUGINS CROSSCOMPILE_OPTS DRACUT_MODULES DVB_CARDS ELIBC FCDSL_CARDS FOO2ZJS_DEVICES FRITZCAPI_CARDS GPSD_PROTOCOLS INPUT_DEVICES KERNEL LCD_DEVICES LINGUAS LIRC_DEVICES MISDN_CARDS NETBEANS_MODULES NGINX_MODULES_HTTP NGINX_MODULES_MAIL PHP_TARGETS QEMU_SOFTMMU_TARGETS QEMU_USER_TARGETS RUBY_TARGETS SANE_BACKENDS USERLAND VIDEO_CARDS XFCE_PLUGINS XTABLES_ADDONS'
VIDEO_CARDS=
WANT_AUTOCONF=latest
WANT_AUTOMAKE=latest
WARN=$'\E[33;01m'
WINDOW=1
WORKDIR=/home/portage/portage/net-libs/libsoup-2.32.2/work
XARGS='xargs -r'
XDG_CONFIG_DIRS=/etc/xdg
XDG_DATA_DIRS=/usr/local/share:/usr/share
XSESSION=Xfce4
XTABLES_ADDONS='quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account'
XZ_OPT=--memory=max
_=retval
_E_DOCDESTTREE_=
_E_EXEDESTTREE_=
_LATEST_AUTOMAKE=1.11
_RC_GET_KV_CACHE=
___ECLASS_RECUR_MULTILIB=yes
___ECLASS_RECUR_TOOLCHAIN_FUNCS=yes
omf=./tests/Makefile.in
save_sp=/dev/crypto:/home/portage/portage/net-libs/libsoup-2.32.2/homedir:/usr/share/snmp/mibs/.index:/var/cache/fontconfig
shopts=$'autocd         \toff\ncdable_vars    \toff\ncdspell        \toff\ncheckhash      \toff\ncheckjobs      \toff\ncheckwinsize   \toff\ncmdhist        \ton\ncompat31       \toff\ncompat32       \toff\ncompat40       \toff\ndirspell       \toff\ndotglob        \toff\nexecfail       \toff\nexpand_aliases \ton\nextdebug       \ton\nextglob        \toff\nextquote       \ton\nfailglob       \toff\nforce_fignore  \ton\nglobstar       \toff\ngnu_errfmt     \toff\nhistappend     \toff\nhistreedit     \toff\nhistverify     \toff\nhostcomplete   \ton\nhuponexit      \toff\ninteractive_comments\ton\nlithist        \toff\nlogin_shell    \toff\nmailwarn       \toff\nno_empty_cmd_completion\toff\nnocaseglob     \toff\nnocasematch    \toff\nnullglob       \toff\nprogcomp       \ton\npromptvars     \ton\nrestricted_shell\toff\nshift_verbose  \toff\nsourcepath     \ton\nxpg_echo       \toff'
ELT_libtool_version () 
{ 
    ( unset VERSION;
    eval $(grep -e '^[[:space:]]*VERSION=' "$1");
    echo "${VERSION:-0}" )
}
ELT_try_and_apply_patch () 
{ 
    local ret=0;
    local file=$1;
    local patch=$2;
    if patch -p0 --dry-run "${file}" "${patch}" &>"${T}/elibtool.log"; then
        einfo "  Applying $(basename "$(dirname "${patch}")")-${patch##*/}.patch ...";
        patch -p0 -g0 --no-backup-if-mismatch "${file}" "${patch}" &>"${T}/elibtool.log";
        ret=$?;
        export ELT_APPLIED_PATCHES="${ELT_APPLIED_PATCHES} ${patch##*/}";
    else
        ret=1;
    fi;
    return "${ret}"
}
ELT_walk_patches () 
{ 
    local patch;
    local ret=1;
    local file=$1;
    local patch_set=$2;
    local patch_dir="${ELT_PATCH_DIR}/${patch_set}";
    local rem_int_dep=$3;
    [[ -z ${patch_set} ]] && return 1;
    [[ ! -d ${patch_dir} ]] && return 1;
    pushd "${ELT_PATCH_DIR}" > /dev/null;
    for patch in $(find "${patch_set}" -maxdepth 1 -type f | LC_ALL=C sort -r);
    do
        if [[ -n ${rem_int_dep} ]]; then
            local tmp="${T}/$$.rem_int_deps.patch";
            sed -e "s|@REM_INT_DEP@|${rem_int_dep}|g" "${patch}" > "${tmp}";
            patch=${tmp};
        fi;
        if ELT_try_and_apply_patch "${file}" "${patch}"; then
            ret=0;
            break;
        fi;
    done;
    popd > /dev/null;
    return ${ret}
}
EXPORT_FUNCTIONS () 
{ 
    if [ -z "$ECLASS" ]; then
        die "EXPORT_FUNCTIONS without a defined ECLASS";
    fi;
    eval $__export_funcs_var+=\" $*\"
}
KV_major () 
{ 
    [[ -z $1 ]] && return 1;
    local KV=$@;
    echo "${KV%%.*}"
}
KV_micro () 
{ 
    [[ -z $1 ]] && return 1;
    local KV=$@;
    KV=${KV#*.*.};
    echo "${KV%%[^[:digit:]]*}"
}
KV_minor () 
{ 
    [[ -z $1 ]] && return 1;
    local KV=$@;
    KV=${KV#*.};
    echo "${KV%%.*}"
}
KV_to_int () 
{ 
    [[ -z $1 ]] && return 1;
    local KV_MAJOR=$(KV_major "$1");
    local KV_MINOR=$(KV_minor "$1");
    local KV_MICRO=$(KV_micro "$1");
    local KV_int=$(( KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO ));
    if [[ ${KV_int} -ge 131584 ]]; then
        echo "${KV_int}";
        return 0;
    fi;
    return 1
}
VER_major () 
{ 
    [[ -z $1 ]] && return 1;
    local VER=$@;
    echo "${VER%%[^[:digit:]]*}"
}
VER_micro () 
{ 
    [[ -z $1 ]] && return 1;
    local VER=$@;
    VER=${VER#*.*.};
    echo "${VER%%[^[:digit:]]*}"
}
VER_minor () 
{ 
    [[ -z $1 ]] && return 1;
    local VER=$@;
    VER=${VER#*.};
    echo "${VER%%[^[:digit:]]*}"
}
VER_to_int () 
{ 
    [[ -z $1 ]] && return 1;
    local VER_MAJOR=$(VER_major "$1");
    local VER_MINOR=$(VER_minor "$1");
    local VER_MICRO=$(VER_micro "$1");
    local VER_int=$(( VER_MAJOR * 65536 + VER_MINOR * 256 + VER_MICRO ));
    if [[ ${VER_int} -ge 65536 ]]; then
        echo "${VER_int}";
        return 0;
    fi;
    echo 1;
    return 1
}
_cdrom_locate_file_on_cd () 
{ 
    local mline="";
    local showedmsg=0 showjolietmsg=0;
    while [[ -z ${CDROM_ROOT} ]]; do
        local i=0;
        local -a cdset=(${*//:/ });
        if [[ -n ${CDROM_SET} ]]; then
            cdset=(${cdset[${CDROM_SET}]});
        fi;
        while [[ -n ${cdset[${i}]} ]]; do
            local dir=$(dirname ${cdset[${i}]});
            local file=$(basename ${cdset[${i}]});
            local point= node= fs= foo=;
            while read point node fs foo; do
                [[ " cd9660 iso9660 udf " != *" ${fs} "* ]] && ! [[ ${fs} == "subfs" && ",${opts}," == *",fs=cdfss,"* ]] && continue;
                point=${point//\040/ };
                [[ ! -d ${point}/${dir} ]] && continue;
                [[ -z $(find "${point}/${dir}" -maxdepth 1 -iname "${file}") ]] && continue;
                export CDROM_ROOT=${point};
                export CDROM_SET=${i};
                export CDROM_MATCH=${cdset[${i}]};
                return;
            done <<< "$(get_mounts)";
            ((++i));
        done;
        echo;
        if [[ ${showedmsg} -eq 0 ]]; then
            if [[ ${CDROM_TOTAL_CDS} -eq 1 ]]; then
                if [[ -z ${CDROM_NAME} ]]; then
                    einfo "Please insert+mount the cdrom for ${PN} now !";
                else
                    einfo "Please insert+mount the ${CDROM_NAME} cdrom now !";
                fi;
            else
                if [[ -z ${CDROM_NAME_1} ]]; then
                    einfo "Please insert+mount cd #${CDROM_CURRENT_CD} for ${PN} now !";
                else
                    local var="CDROM_NAME_${CDROM_CURRENT_CD}";
                    einfo "Please insert+mount the ${!var} cdrom now !";
                fi;
            fi;
            showedmsg=1;
        fi;
        einfo "Press return to scan for the cd again";
        einfo "or hit CTRL+C to abort the emerge.";
        echo;
        if [[ ${showjolietmsg} -eq 0 ]]; then
            showjolietmsg=1;
        else
            ewarn "If you are having trouble with the detection";
            ewarn "of your CD, it is possible that you do not have";
            ewarn "Joliet support enabled in your kernel.  Please";
            ewarn "check that CONFIG_JOLIET is enabled in your kernel.";
            ebeep 5;
        fi;
        read || die "something is screwed with your system";
    done
}
_eapi0_pkg_nofetch () 
{ 
    [ -z "${SRC_URI}" ] && return;
    elog "The following are listed in SRC_URI for ${PN}:";
    local x;
    for x in $(echo ${SRC_URI});
    do
        elog "   ${x}";
    done
}
_eapi0_src_compile () 
{ 
    if [ -x ./configure ]; then
        econf;
    fi;
    _eapi2_src_compile
}
_eapi0_src_test () 
{ 
    local emake_cmd="${MAKE:-make} ${MAKEOPTS} ${EXTRA_EMAKE}";
    if $emake_cmd -j1 check -n &>/dev/null; then
        vecho ">>> Test phase [check]: ${CATEGORY}/${PF}";
        if ! $emake_cmd -j1 check; then
            hasq test $FEATURES && die "Make check failed. See above for details.";
            hasq test $FEATURES || eerror "Make check failed. See above for details.";
        fi;
    else
        if $emake_cmd -j1 test -n &>/dev/null; then
            vecho ">>> Test phase [test]: ${CATEGORY}/${PF}";
            if ! $emake_cmd -j1 test; then
                hasq test $FEATURES && die "Make test failed. See above for details.";
                hasq test $FEATURES || eerror "Make test failed. See above for details.";
            fi;
        else
            vecho ">>> Test phase [none]: ${CATEGORY}/${PF}";
        fi;
    fi
}
_eapi0_src_unpack () 
{ 
    [[ -n ${A} ]] && unpack ${A}
}
_eapi1_src_compile () 
{ 
    _eapi2_src_configure;
    _eapi2_src_compile
}
_eapi2_pkg_nofetch () 
{ 
    _eapi0_pkg_nofetch "$@"
}
_eapi2_src_compile () 
{ 
    if [ -f Makefile ] || [ -f GNUmakefile ] || [ -f makefile ]; then
        emake || die "emake failed";
    fi
}
_eapi2_src_configure () 
{ 
    if [[ -x ${ECONF_SOURCE:-.}/configure ]]; then
        econf;
    fi
}
_eapi2_src_install () 
{ 
    die "$FUNCNAME is not supported"
}
_eapi2_src_prepare () 
{ 
    true
}
_eapi2_src_test () 
{ 
    _eapi0_src_test "$@"
}
_eapi2_src_unpack () 
{ 
    _eapi0_src_unpack "$@"
}
_eapi4_src_install () 
{ 
    if [[ -f Makefile || -f GNUmakefile || -f makefile ]]; then
        emake DESTDIR="${D}" install;
    fi;
    if ! declare -p DOCS &>/dev/null; then
        local d;
        for d in README* ChangeLog AUTHORS NEWS TODO CHANGES THANKS BUGS FAQ CREDITS CHANGELOG;
        do
            [[ -s "${d}" ]] && dodoc "${d}";
        done;
    else
        if [[ $(declare -p DOCS) == "declare -a "* ]]; then
            dodoc "${DOCS[@]}";
        else
            dodoc ${DOCS};
        fi;
    fi
}
_ebuild_arg_to_phase () 
{ 
    [ $# -ne 2 ] && die "expected exactly 2 args, got $#: $*";
    local eapi=$1;
    local arg=$2;
    local phase_func="";
    case "$arg" in 
        pretend)
            ! hasq $eapi 0 1 2 3 3_pre2 && phase_func=pkg_pretend
        ;;
        setup)
            phase_func=pkg_setup
        ;;
        nofetch)
            phase_func=pkg_nofetch
        ;;
        unpack)
            phase_func=src_unpack
        ;;
        prepare)
            ! hasq $eapi 0 1 && phase_func=src_prepare
        ;;
        configure)
            ! hasq $eapi 0 1 && phase_func=src_configure
        ;;
        compile)
            phase_func=src_compile
        ;;
        test)
            phase_func=src_test
        ;;
        install)
            phase_func=src_install
        ;;
        preinst)
            phase_func=pkg_preinst
        ;;
        postinst)
            phase_func=pkg_postinst
        ;;
        prerm)
            phase_func=pkg_prerm
        ;;
        postrm)
            phase_func=pkg_postrm
        ;;
    esac;
    [[ -z $phase_func ]] && return 1;
    echo "$phase_func";
    return 0
}
_ebuild_phase_funcs () 
{ 
    [ $# -ne 2 ] && die "expected exactly 2 args, got $#: $*";
    local eapi=$1;
    local phase_func=$2;
    local default_phases="pkg_nofetch src_unpack src_prepare src_configure
		src_compile src_install src_test";
    local x y default_func="";
    for x in pkg_nofetch src_unpack src_test;
    do
        declare -F $x > /dev/null || eval "$x() { _eapi0_$x \"\$@\" ; }";
    done;
    case $eapi in 
        0 | 1)
            if ! declare -F src_compile > /dev/null; then
                case $eapi in 
                    0)
                        function src_compile () 
                        { 
                            _eapi0_src_compile "$@"
                        }
                    ;;
                    *)
                        function src_compile () 
                        { 
                            _eapi1_src_compile "$@"
                        }
                    ;;
                esac;
            fi;
            for x in $default_phases;
            do
                eval "default_$x() {
					die \"default_$x() is not supported with EAPI='$eapi' during phase $phase_func\"
				}";
            done;
            eval "default() {
				die \"default() is not supported with EAPI='$eapi' during phase $phase_func\"
			}"
        ;;
        *)
            declare -F src_configure > /dev/null || function src_configure () 
            { 
                _eapi2_src_configure "$@"
            };
            declare -F src_compile > /dev/null || function src_compile () 
            { 
                _eapi2_src_compile "$@"
            };
            has $eapi 2 3 3_pre2 || declare -F src_install > /dev/null || function src_install () 
            { 
                _eapi4_src_install "$@"
            };
            if hasq $phase_func $default_phases; then
                function _eapi2_pkg_nofetch () 
                { 
                    _eapi0_pkg_nofetch "$@"
                };
                function _eapi2_src_unpack () 
                { 
                    _eapi0_src_unpack "$@"
                };
                function _eapi2_src_prepare () 
                { 
                    true
                };
                function _eapi2_src_test () 
                { 
                    _eapi0_src_test "$@"
                };
                function _eapi2_src_install () 
                { 
                    die "$FUNCNAME is not supported"
                };
                for x in $default_phases;
                do
                    eval "default_$x() { _eapi2_$x \"\$@\" ; }";
                done;
                eval "default() { _eapi2_$phase_func \"\$@\" ; }";
                case $eapi in 
                    2 | 3)

                    ;;
                    *)
                        eval "default_src_install() { _eapi4_src_install \"\$@\" ; }";
                        [[ $phase_func = src_install ]] && eval "default() { _eapi4_$phase_func \"\$@\" ; }"
                    ;;
                esac;
            else
                for x in $default_phases;
                do
                    eval "default_$x() {
						die \"default_$x() is not supported in phase $default_func\"
					}";
                done;
                eval "default() {
					die \"default() is not supported with EAPI='$eapi' during phase $phase_func\"
				}";
            fi
        ;;
    esac
}
_eend () 
{ 
    local retval=${1:-0} efunc=${2:-eerror} msg;
    shift 2;
    if [[ ${retval} == "0" ]]; then
        msg="${BRACKET}[ ${GOOD}ok${BRACKET} ]${NORMAL}";
    else
        if [[ -n $* ]]; then
            ${efunc} "$*";
        fi;
        msg="${BRACKET}[ ${BAD}!!${BRACKET} ]${NORMAL}";
    fi;
    if [[ ${RC_ENDCOL} == "yes" ]]; then
        echo -e "${ENDCOL} ${msg}";
    else
        [[ ${LAST_E_CMD} == ebegin ]] || LAST_E_LEN=0;
        printf "%$(( COLS - LAST_E_LEN - 7 ))s%b\n" '' "${msg}";
    fi;
    return ${retval}
}
_elibtoolize () 
{ 
    local opts g=;
    [[ -n $(autotools_check_macro AC_PROG_LIBTOOL AM_PROG_LIBTOOL LT_INIT) ]] || return 0;
    [[ -f GNUmakefile.am || -f Makefile.am ]] && opts="--automake";
    [[ ${CHOST} == *-darwin* ]] && g=g;
    autotools_run_tool ${LIBTOOLIZE:-${g}libtoolize} "$@" ${opts};
    eaclocal
}
_gcc-install-dir () 
{ 
    echo "$(LC_ALL=C $(tc-getCC) -print-search-dirs 2> /dev/null |		awk '$1=="install:" {print $2}')"
}
_gcc-specs-directive_raw () 
{ 
    local cc=$(tc-getCC);
    local specfiles=$(LC_ALL=C ${cc} -v 2>&1 | awk '$1=="Reading" {print $NF}');
    ${cc} -dumpspecs 2> /dev/null | cat - ${specfiles} | awk -v directive=$1 'BEGIN	{ pspec=""; spec=""; outside=1 }
$1=="*"directive":"  { pspec=spec; spec=""; outside=0; next }
	outside || NF==0 || ( substr($1,1,1)=="*" && substr($1,length($1),1)==":" ) { outside=1; next }
	spec=="" && substr($0,1,1)=="+" { spec=pspec " " substr($0,2); next }
	{ spec=spec $0 }
END	{ print spec }';
    return 0
}
_gcc-specs-exists () 
{ 
    [[ -f $(_gcc-install-dir)/$1 ]]
}
_gcc_fullversion () 
{ 
    local ver="$1";
    shift;
    set -- `$(tc-getCPP "$@") -E -P - <<<"__GNUC__ __GNUC_MINOR__ __GNUC_PATCHLEVEL__"`;
    eval echo "$ver"
}
_sb_append_var () 
{ 
    local _v=$1;
    shift;
    local var="SANDBOX_${_v}";
    [[ -z $1 || -n $2 ]] && die "Usage: add$(echo ${_v} | 		LC_ALL=C tr [:upper:] [:lower:]) <colon-delimited list of paths>";
    export ${var}="${!var:+${!var}:}$1"
}
_unpack_tar () 
{ 
    if [ "${y}" == "tar" ]; then
        $1 -c -- "$srcdir$x" | tar xof -;
        assert_sigpipe_ok "$myfail";
    else
        $1 -c -- "${srcdir}${x}" > ${x%.*} || die "$myfail";
    fi
}
abort_compile () 
{ 
    abort_handler "src_compile" $1;
    rm -f "${PORTAGE_BUILDDIR}/.compiled";
    exit 1
}
abort_configure () 
{ 
    abort_handler src_configure $1;
    rm -f "$PORTAGE_BUILDDIR/.configured";
    exit 1
}
abort_handler () 
{ 
    local msg;
    if [ "$2" != "fail" ]; then
        msg="${EBUILD}: ${1} aborted; exiting.";
    else
        msg="${EBUILD}: ${1} failed; exiting.";
    fi;
    echo;
    echo "$msg";
    echo;
    eval ${3};
    trap - SIGINT SIGQUIT
}
abort_install () 
{ 
    abort_handler "src_install" $1;
    rm -rf "${PORTAGE_BUILDDIR}/image";
    exit 1
}
abort_prepare () 
{ 
    abort_handler src_prepare $1;
    rm -f "$PORTAGE_BUILDDIR/.prepared";
    exit 1
}
abort_test () 
{ 
    abort_handler "dyn_test" $1;
    rm -f "${PORTAGE_BUILDDIR}/.tested";
    exit 1
}
aclocal () 
{ 
    if ! hasq ${FUNCNAME[1]} eautoreconf eaclocal _elibtoolize eautoheader eautoconf eautomake autotools_run_tool autotools_check_macro autotools_get_subdirs autotools_get_auxdir; then
        eqawarn "QA Notice: 'aclocal' called by ${FUNCNAME[1]}: ${CATEGORY}/${PF}";
        eqawarn "Use autotools.eclass instead of calling 'aclocal' directly.";
    fi;
    /usr/bin/aclocal "$@";
    return $?
}
adddeny () 
{ 
    _sb_append_var DENY "$@"
}
addpredict () 
{ 
    _sb_append_var PREDICT "$@"
}
addread () 
{ 
    _sb_append_var READ "$@"
}
addwrite () 
{ 
    _sb_append_var WRITE "$@"
}
assert () 
{ 
    local x pipestatus=${PIPESTATUS[*]};
    for x in $pipestatus;
    do
        [[ $x -eq 0 ]] || die "$@";
    done
}
assert_sigpipe_ok () 
{ 
    local x pipestatus=${PIPESTATUS[*]};
    for x in $pipestatus;
    do
        [[ $x -ne 0 && $x -ne ${PORTAGE_SIGPIPE_STATUS:-141} ]] && die "$@";
    done;
    [[ $x -eq 0 ]] || die "$@"
}
autoconf () 
{ 
    if ! hasq ${FUNCNAME[1]} eautoreconf eaclocal _elibtoolize eautoheader eautoconf eautomake autotools_run_tool autotools_check_macro autotools_get_subdirs autotools_get_auxdir; then
        eqawarn "QA Notice: 'autoconf' called by ${FUNCNAME[1]}: ${CATEGORY}/${PF}";
        eqawarn "Use autotools.eclass instead of calling 'autoconf' directly.";
    fi;
    /usr/bin/autoconf "$@";
    return $?
}
automake () 
{ 
    if ! hasq ${FUNCNAME[1]} eautoreconf eaclocal _elibtoolize eautoheader eautoconf eautomake autotools_run_tool autotools_check_macro autotools_get_subdirs autotools_get_auxdir; then
        eqawarn "QA Notice: 'automake' called by ${FUNCNAME[1]}: ${CATEGORY}/${PF}";
        eqawarn "Use autotools.eclass instead of calling 'automake' directly.";
    fi;
    /usr/bin/automake "$@";
    return $?
}
autotools_check_macro () 
{ 
    [[ -f configure.ac || -f configure.in ]] || return 0;
    local macro;
    for macro in "$@";
    do
        WANT_AUTOCONF="2.5" autoconf --trace="${macro}" 2> /dev/null;
    done;
    return 0
}
autotools_get_auxdir () 
{ 
    local auxdir_scan_out;
    auxdir_scan_out=$(autotools_check_macro "AC_CONFIG_AUX_DIR");
    [[ -n ${auxdir_scan_out} ]] || return 0;
    echo ${auxdir_scan_out} | gawk '($0 !~ /^[[:space:]]*(#|dnl)/) {
		if (match($0, /AC_CONFIG_AUX_DIR:(.*)$/, res))
			print res[1]
	}' | uniq;
    return 0
}
autotools_get_subdirs () 
{ 
    local subdirs_scan_out;
    subdirs_scan_out=$(autotools_check_macro "AC_CONFIG_SUBDIRS");
    [[ -n ${subdirs_scan_out} ]] || return 0;
    echo "${subdirs_scan_out}" | gawk '($0 !~ /^[[:space:]]*(#|dnl)/) {
		if (match($0, /AC_CONFIG_SUBDIRS:(.*)$/, res))
			print res[1]
	}' | uniq;
    return 0
}
autotools_run_tool () 
{ 
    if [[ ${EBUILD_PHASE} != "unpack" && ${EBUILD_PHASE} != "prepare" ]]; then
        ewarn "QA Warning: running $1 in ${EBUILD_PHASE} phase";
    fi;
    if [[ ${WANT_AUTOMAKE} == "latest" ]]; then
        local pv;
        for pv in ${_LATEST_AUTOMAKE};
        do
            ROOT=/ has_version "=sys-devel/automake-${pv}*" && export WANT_AUTOMAKE="$pv";
        done;
        [[ ${WANT_AUTOMAKE} == "latest" ]] && die "Cannot find the latest automake! Tried ${_LATEST_AUTOMAKE}";
    fi;
    [[ ${WANT_AUTOCONF} == "latest" ]] && export WANT_AUTOCONF=2.5;
    local STDERR_TARGET="${T}/$1.out";
    if [[ -e ${STDERR_TARGET} ]]; then
        STDERR_TARGET="${T}/$1-$$.out";
    fi;
    printf "***** $1 *****\n***** PWD: ${PWD}\n***** $*\n\n" > "${STDERR_TARGET}";
    ebegin "Running $@";
    "$@" >> "${STDERR_TARGET}" 2>&1;
    eend $?;
    if [[ $? != 0 && ${NO_FAIL} != 1 ]]; then
        echo;
        eerror "Failed Running $1 !";
        eerror;
        eerror "Include in your bugreport the contents of:";
        eerror;
        eerror "  ${STDERR_TARGET}";
        echo;
        die "Failed Running $1 !";
    fi
}
best_version () 
{ 
    if [ "${EBUILD_PHASE}" == "depend" ]; then
        die "portageq calls (best_version calls portageq) are not allowed in the global scope";
    fi;
    if [[ -n $PORTAGE_IPC_DAEMON ]]; then
        "$PORTAGE_BIN_PATH"/ebuild-ipc best_version "$ROOT" "$1";
    else
        PYTHONPATH=${PORTAGE_PYM_PATH}${PYTHONPATH:+:}${PYTHONPATH} "${PORTAGE_PYTHON:-/usr/bin/python}" "${PORTAGE_BIN_PATH}/portageq" 'best_version' "${ROOT}" "$1";
    fi;
    local retval=$?;
    case "${retval}" in 
        0 | 1)
            return ${retval}
        ;;
        *)
            die "unexpected portageq exit code: ${retval}"
        ;;
    esac
}
built_with_use () 
{ 
    local hidden="no";
    if [[ $1 == "--hidden" ]]; then
        hidden="yes";
        shift;
    fi;
    local missing_action="die";
    if [[ $1 == "--missing" ]]; then
        missing_action=$2;
        shift;
        shift;
        case ${missing_action} in 
            true | false | die)

            ;;
            *)
                die "unknown action '${missing_action}'"
            ;;
        esac;
    fi;
    local opt=$1;
    [[ ${opt:0:1} = "-" ]] && shift || opt="-a";
    local PKG=$(best_version $1);
    [[ -z ${PKG} ]] && die "Unable to resolve $1 to an installed package";
    shift;
    local USEFILE=${ROOT}/var/db/pkg/${PKG}/USE;
    local IUSEFILE=${ROOT}/var/db/pkg/${PKG}/IUSE;
    if [[ ! -e ${USEFILE} ]] || [[ ! -e ${IUSEFILE} && ${hidden} == "no" ]]; then
        case ${missing_action} in 
            true)
                return 0
            ;;
            false)
                return 1
            ;;
            die)
                die "Unable to determine what USE flags $PKG was built with"
            ;;
        esac;
    fi;
    if [[ ${hidden} == "no" ]]; then
        local IUSE_BUILT=($(<"${IUSEFILE}"));
        local expand;
        for expand in $(echo ${USE_EXPAND} | tr '[:upper:]' '[:lower:]');
        do
            if [[ $1 == ${expand}_* ]]; then
                expand="";
                break;
            fi;
        done;
        if [[ -n ${expand} ]]; then
            if ! has $1 ${IUSE_BUILT[@]#[-+]}; then
                case ${missing_action} in 
                    true)
                        return 0
                    ;;
                    false)
                        return 1
                    ;;
                    die)
                        die "$PKG does not actually support the $1 USE flag!"
                    ;;
                esac;
            fi;
        fi;
    fi;
    local USE_BUILT=$(<${USEFILE});
    while [[ $# -gt 0 ]]; do
        if [[ ${opt} = "-o" ]]; then
            has $1 ${USE_BUILT} && return 0;
        else
            has $1 ${USE_BUILT} || return 1;
        fi;
        shift;
    done;
    [[ ${opt} = "-a" ]]
}
cdrom_get_cds () 
{ 
    local cdcnt=0;
    local f=;
    for f in "$@";
    do
        ((++cdcnt));
        export CDROM_CHECK_${cdcnt}="$f";
    done;
    export CDROM_TOTAL_CDS=${cdcnt};
    export CDROM_CURRENT_CD=1;
    if [[ -n ${CD_ROOT}${CD_ROOT_1} ]]; then
        local var=;
        cdcnt=0;
        while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
            ((++cdcnt));
            var="CD_ROOT_${cdcnt}";
            [[ -z ${!var} ]] && var="CD_ROOT";
            if [[ -z ${!var} ]]; then
                eerror "You must either use just the CD_ROOT";
                eerror "or specify ALL the CD_ROOT_X variables.";
                eerror "In this case, you will need ${CDROM_TOTAL_CDS} CD_ROOT_X variables.";
                die "could not locate CD_ROOT_${cdcnt}";
            fi;
        done;
        export CDROM_ROOT=${CD_ROOT_1:-${CD_ROOT}};
        einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}";
        export CDROM_SET=-1;
        for f in ${CDROM_CHECK_1//:/ };
        do
            ((++CDROM_SET));
            [[ -e ${CDROM_ROOT}/${f} ]] && break;
        done;
        export CDROM_MATCH=${f};
        return;
    fi;
    if [[ ${CDROM_TOTAL_CDS} -eq 1 ]]; then
        einfo "This ebuild will need the ${CDROM_NAME:-cdrom for ${PN}}";
        echo;
        einfo "If you do not have the CD, but have the data files";
        einfo "mounted somewhere on your filesystem, just export";
        einfo "the variable CD_ROOT so that it points to the";
        einfo "directory containing the files.";
        echo;
        einfo "For example:";
        einfo "export CD_ROOT=/mnt/cdrom";
        echo;
    else
        if [[ -n ${CDROM_NAME_SET} ]]; then
            cdcnt=0;
            while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
                ((++cdcnt));
                export CDROM_NAME_${cdcnt}="${CDROM_NAME_SET[$((${cdcnt}-1))]}";
            done;
        fi;
        einfo "This package will need access to ${CDROM_TOTAL_CDS} cds.";
        cdcnt=0;
        while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
            ((++cdcnt));
            var="CDROM_NAME_${cdcnt}";
            [[ ! -z ${!var} ]] && einfo " CD ${cdcnt}: ${!var}";
        done;
        echo;
        einfo "If you do not have the CDs, but have the data files";
        einfo "mounted somewhere on your filesystem, just export";
        einfo "the following variables so they point to the right place:";
        einfon "";
        cdcnt=0;
        while [[ ${cdcnt} -lt ${CDROM_TOTAL_CDS} ]]; do
            ((++cdcnt));
            echo -n " CD_ROOT_${cdcnt}";
        done;
        echo;
        einfo "Or, if you have all the files in the same place, or";
        einfo "you only have one cdrom, you can export CD_ROOT";
        einfo "and that place will be used as the same data source";
        einfo "for all the CDs.";
        echo;
        einfo "For example:";
        einfo "export CD_ROOT_1=/mnt/cdrom";
        echo;
    fi;
    export CDROM_SET="";
    export CDROM_CURRENT_CD=0;
    cdrom_load_next_cd
}
cdrom_load_next_cd () 
{ 
    local var;
    ((++CDROM_CURRENT_CD));
    unset CDROM_ROOT;
    var=CD_ROOT_${CDROM_CURRENT_CD};
    [[ -z ${!var} ]] && var="CD_ROOT";
    if [[ -z ${!var} ]]; then
        var="CDROM_CHECK_${CDROM_CURRENT_CD}";
        _cdrom_locate_file_on_cd ${!var};
    else
        export CDROM_ROOT=${!var};
    fi;
    einfo "Found CD #${CDROM_CURRENT_CD} root at ${CDROM_ROOT}"
}
check_license () 
{ 
    local lic=$1;
    if [ -z "${lic}" ]; then
        lic="${PORTDIR}/licenses/${LICENSE}";
    else
        if [ -e "${PORTDIR}/licenses/${lic}" ]; then
            lic="${PORTDIR}/licenses/${lic}";
        else
            if [ -e "${PWD}/${lic}" ]; then
                lic="${PWD}/${lic}";
            else
                if [ -e "${lic}" ]; then
                    lic="${lic}";
                fi;
            fi;
        fi;
    fi;
    local l="`basename ${lic}`";
    local alic;
    eshopts_push -o noglob;
    for alic in ${ACCEPT_LICENSE};
    do
        if [[ ${alic} == ${l} ]]; then
            eshopts_pop;
            return 0;
        fi;
    done;
    eshopts_pop;
    [ ! -f "${lic}" ] && die "Could not find requested license ${lic}";
    local licmsg=$(emktemp);
    cat > ${licmsg}  <<-EOF
**********************************************************
The following license outlines the terms of use of this
package.  You MUST accept this license for installation to
continue.  When you are done viewing, hit 'q'.	If you
CTRL+C out of this, the install will not run!
**********************************************************

EOF

    cat ${lic} >> ${licmsg};
    ${PAGER:-less} ${licmsg} || die "Could not execute pager (${PAGER}) to accept ${lic}";
    einfon "Do you accept the terms of this license (${l})? [yes/no] ";
    read alic;
    case ${alic} in 
        yes | Yes | y | Y)
            return 0
        ;;
        *)
            echo;
            echo;
            echo;
            eerror "You MUST accept the license to continue!  Exiting!";
            die "Failed to accept license"
        ;;
    esac
}
create_ml_includes () 
{ 
    local dest=$1;
    shift;
    local basedirs=$(create_ml_includes-listdirs "$@");
    create_ml_includes-makedestdirs ${dest} ${basedirs};
    local file;
    for file in $(create_ml_includes-allfiles ${basedirs});
    do
        ( echo "/* Autogenerated by create_ml_includes() in multilib.eclass */";
        local dir;
        for dir in ${basedirs};
        do
            if [[ -f ${D}/${dir}/${file} ]]; then
                echo "";
                local sym=$(create_ml_includes-sym_for_dir ${dir} "$@");
                if [[ ${sym/=} != "${sym}" ]]; then
                    echo "#if ${sym}";
                else
                    if [[ ${sym::1} == "!" ]]; then
                        echo "#ifndef ${sym:1}";
                    else
                        echo "#ifdef ${sym}";
                    fi;
                fi;
                echo "# include <$(create_ml_includes-absolute ${dir}/${file})>";
                echo "#endif /* ${sym} */";
            fi;
        done ) > "${D}/${dest}/${file}";
    done
}
create_ml_includes-absolute () 
{ 
    local dst="$(create_ml_includes-tidy_path $1)";
    dst=(${dst//\// });
    local i;
    for ((i=0; i<${#dst[*]}; i++))
    do
        [ "${dst[i]}" == "include" ] && break;
    done;
    local strip_upto=$i;
    for ((i=strip_upto+1; i<${#dst[*]}-1; i++))
    do
        echo -n ${dst[i]}/;
    done;
    echo -n ${dst[i]}
}
create_ml_includes-allfiles () 
{ 
    [[ -z ${ED} ]] && local ED=${D};
    local basedir file;
    for basedir in "$@";
    do
        for file in $(find "${ED}"/${basedir} -type f);
        do
            echo ${file/${ED}\/${basedir}\//};
        done;
    done | sort | uniq
}
create_ml_includes-listdirs () 
{ 
    local dirs;
    local data;
    for data in "$@";
    do
        dirs="${dirs} ${data/*:/}";
    done;
    echo ${dirs:1}
}
create_ml_includes-makedestdirs () 
{ 
    local dest=$1;
    shift;
    local basedirs=$@;
    [[ -z ${ED} ]] && local ED=${D};
    dodir ${dest};
    local basedir;
    for basedir in ${basedirs};
    do
        local dir;
        for dir in $(find "${ED}"/${basedir} -type d);
        do
            dodir ${dest}/${dir/${ED}\/${basedir}/};
        done;
    done
}
create_ml_includes-sym_for_dir () 
{ 
    local dir=$1;
    shift;
    local data;
    for data in "$@";
    do
        if [[ ${data} == *:${dir} ]]; then
            echo ${data/:*/};
            return 0;
        fi;
    done;
    echo "Shouldn't be here -- create_ml_includes-sym_for_dir $1 $@";
    exit 1
}
create_ml_includes-tidy_path () 
{ 
    local removed=$1;
    if [ -n "${removed}" ]; then
        while [ "${removed}" != "${removed/\/\//\/}" ]; do
            removed=${removed/\/\//\/};
        done;
        while [ "${removed}" != "${removed//\/.\//\/}" ]; do
            removed=${removed//\/.\//\/};
        done;
        [ "${removed##*/}" = "." ] && removed=${removed%/*};
        while [ "${removed}" != "${removed//\/..\/}" ]; do
            local p1="${removed%%\/..\/*}";
            local p2="${removed#*\/..\/}";
            removed="${p1%\/*}/${p2}";
        done;
        [ "${removed##*/}" = ".." ] && removed=${removed%/*/*};
        [ "${removed##*/}" = "" ] && removed=${removed%/*};
        echo ${removed};
    fi
}
darwintoolize () 
{ 
    die "Use elibtoolize"
}
debug-print () 
{ 
    [[ $EBUILD_PHASE = depend || ! -d ${T} || ${#} -eq 0 ]] && return 0;
    if [[ ${ECLASS_DEBUG_OUTPUT} == on ]]; then
        printf 'debug: %s\n' "${@}" 1>&2;
    else
        if [[ -n ${ECLASS_DEBUG_OUTPUT} ]]; then
            printf 'debug: %s\n' "${@}" >> "${ECLASS_DEBUG_OUTPUT}";
        fi;
    fi;
    if [[ -w $T ]]; then
        printf '%s\n' "${@}" >> "${T}/eclass-debug.log";
        chgrp portage "${T}/eclass-debug.log" &>/dev/null;
        chmod g+w "${T}/eclass-debug.log" &>/dev/null;
    fi
}
debug-print-function () 
{ 
    debug-print "${1}: entering function, parameters: ${*:2}"
}
debug-print-section () 
{ 
    debug-print "now in section ${*}"
}
default () 
{ 
    _eapi2_src_test "$@"
}
default_pkg_nofetch () 
{ 
    _eapi2_pkg_nofetch "$@"
}
default_src_compile () 
{ 
    _eapi2_src_compile "$@"
}
default_src_configure () 
{ 
    _eapi2_src_configure "$@"
}
default_src_install () 
{ 
    _eapi2_src_install "$@"
}
default_src_prepare () 
{ 
    _eapi2_src_prepare "$@"
}
default_src_test () 
{ 
    _eapi2_src_test "$@"
}
default_src_unpack () 
{ 
    _eapi2_src_unpack "$@"
}
die () 
{ 
    if [[ $PORTAGE_NONFATAL -eq 1 ]]; then
        echo -e " $WARN*$NORMAL ${FUNCNAME[1]}: WARNING: $@" 1>&2;
        return 1;
    fi;
    set +e;
    if [ -n "${QA_INTERCEPTORS}" ]; then
        unset -f ${QA_INTERCEPTORS};
        unset QA_INTERCEPTORS;
    fi;
    local n filespacing=0 linespacing=0;
    (( n = ${#FUNCNAME[@]} - 1 ));
    while (( n > 0 )); do
        [ "${FUNCNAME[${n}]}" == "qa_call" ] && break;
        (( n-- ));
    done;
    (( n == 0 )) && (( n = ${#FUNCNAME[@]} - 1 ));
    while (( n > 0 )); do
        sourcefile=${BASH_SOURCE[${n}]} sourcefile=${sourcefile##*/};
        lineno=${BASH_LINENO[${n}]};
        ((filespacing < ${#sourcefile})) && filespacing=${#sourcefile};
        ((linespacing < ${#lineno})) && linespacing=${#lineno};
        (( n-- ));
    done;
    local phase_str=;
    [[ -n $EBUILD_PHASE ]] && phase_str=" ($EBUILD_PHASE phase)";
    eerror "ERROR: $CATEGORY/$PF failed${phase_str}:";
    eerror "  ${*:-(no error message)}";
    eerror;
    local main_index;
    (( main_index = ${#BASH_SOURCE[@]} - 1 ));
    if has ${BASH_SOURCE[$main_index]##*/} ebuild.sh misc-functions.sh; then
        dump_trace 2 ${filespacing} ${linespacing};
        eerror "  $(printf "%${filespacing}s" "${BASH_SOURCE[1]##*/}"), line $(printf "%${linespacing}s" "${BASH_LINENO[0]}"):  Called die";
        eerror "The specific snippet of code:";
        sed -n -e "# When we get to the line that failed, append it to the
		    # hold space, move the hold space to the pattern space,
		    # then print out the pattern space and quit immediately
		    ${BASH_LINENO[0]}{H;g;p;q}" -e '# If this line ends with a line continuation, append it
		    # to the hold space
		    /\\$/H' -e '# If this line does not end with a line continuation,
		    # erase the line and set the hold buffer to it (thus
		    # erasing the hold buffer in the process)
		    /[^\]$/{s:^.*$::;h}' "${BASH_SOURCE[1]}" | sed -e '1d' -e 's:^:RETAIN-LEADING-SPACE:' | while read -r n; do
            eerror "  ${n#RETAIN-LEADING-SPACE}";
        done;
        eerror;
    fi;
    eerror "If you need support, post the output of 'emerge --info =$CATEGORY/$PF',";
    eerror "the complete build log and the output of 'emerge -pqv =$CATEGORY/$PF'.";
    if [[ -n ${EBUILD_OVERLAY_ECLASSES} ]]; then
        eerror "This ebuild used the following eclasses from overlays:";
        local x;
        for x in ${EBUILD_OVERLAY_ECLASSES};
        do
            eerror "  ${x}";
        done;
    fi;
    if [ "${EMERGE_FROM}" != "binary" ] && ! hasq ${EBUILD_PHASE} prerm postrm && [ "${EBUILD#${PORTDIR}/}" == "${EBUILD}" ]; then
        local overlay=${EBUILD%/*};
        overlay=${overlay%/*};
        overlay=${overlay%/*};
        if [[ -n $PORTAGE_REPO_NAME ]]; then
            eerror "This ebuild is from an overlay named" "'$PORTAGE_REPO_NAME': '${overlay}/'";
        else
            eerror "This ebuild is from an overlay: '${overlay}/'";
        fi;
    else
        if [[ -n $PORTAGE_REPO_NAME && -f "$PORTDIR"/profiles/repo_name ]]; then
            local portdir_repo_name=$(<"$PORTDIR"/profiles/repo_name);
            if [[ -n $portdir_repo_name && $portdir_repo_name != $PORTAGE_REPO_NAME ]]; then
                eerror "This ebuild is from a repository" "named '$PORTAGE_REPO_NAME'";
            fi;
        fi;
    fi;
    if [[ "${EBUILD_PHASE/depend}" == "${EBUILD_PHASE}" ]]; then
        local x;
        for x in $EBUILD_DEATH_HOOKS;
        do
            ${x} "$@" 1>&2 1>&2;
        done;
         > "$PORTAGE_BUILDDIR/.die_hooks";
    fi;
    [[ -n ${PORTAGE_LOG_FILE} ]] && eerror "The complete build log is located at '${PORTAGE_LOG_FILE}'.";
    if [ -f "${T}/environment" ]; then
        eerror "The ebuild environment file is located at '${T}/environment'.";
    else
        if [ -d "${T}" ]; then
            { 
                set;
                export
            } > "${T}/die.env";
            eerror "The ebuild environment file is located at '${T}/die.env'.";
        fi;
    fi;
    eerror "S: '${S}'";
    [[ -n $PORTAGE_EBUILD_EXIT_FILE ]] &&  > "$PORTAGE_EBUILD_EXIT_FILE";
    [[ -n $PORTAGE_IPC_DAEMON ]] && "$PORTAGE_BIN_PATH"/ebuild-ipc exit 1;
    [[ $BASHPID = $EBUILD_MASTER_PID ]] || kill -s SIGTERM $EBUILD_MASTER_PID;
    exit 1
}
diefunc () 
{ 
    die "${@}"
}
diropts () 
{ 
    export DIROPTIONS="$@"
}
dlopen_lib () 
{ 
    case "${CHOST}" in 
        *-linux-gnu* | *-linux-uclibc | *-interix*)
            echo "-ldl"
        ;;
    esac
}
docinto () 
{ 
    if [ "$1" == "/" ]; then
        export _E_DOCDESTTREE_="";
    else
        export _E_DOCDESTTREE_="$1";
        if [ ! -d "${D}usr/share/doc/${PF}/${_E_DOCDESTTREE_}" ]; then
            install -d "${D}usr/share/doc/${PF}/${_E_DOCDESTTREE_}";
            local ret=$?;
            if [[ $ret -ne 0 ]]; then
                helpers_die "${FUNCNAME[0]} failed";
                return $ret;
            fi;
        fi;
    fi
}
docompress () 
{ 
    hasq "${EAPI}" 0 1 2 3 && die "'docompress' not supported in this EAPI";
    local f g;
    if [[ $1 = "-x" ]]; then
        shift;
        for f in "$@";
        do
            f=$(strip_duplicate_slashes "${f}");
            f=${f%/};
            [[ ${f:0:1} = / ]] || f="/${f}";
            for g in "${PORTAGE_DOCOMPRESS_SKIP[@]}";
            do
                [[ ${f} = "${g}" ]] && continue 2;
            done;
            PORTAGE_DOCOMPRESS_SKIP[${#PORTAGE_DOCOMPRESS_SKIP[@]}]=${f};
        done;
    else
        for f in "$@";
        do
            f=$(strip_duplicate_slashes "${f}");
            f=${f%/};
            [[ ${f:0:1} = / ]] || f="/${f}";
            for g in "${PORTAGE_DOCOMPRESS[@]}";
            do
                [[ ${f} = "${g}" ]] && continue 2;
            done;
            PORTAGE_DOCOMPRESS[${#PORTAGE_DOCOMPRESS[@]}]=${f};
        done;
    fi
}
doicon () 
{ 
    ( local i j ret;
    insinto /usr/share/pixmaps;
    for i in "$@";
    do
        if [[ -f ${i} ]]; then
            doins "${i}";
            ((ret+=$?));
        else
            if [[ -d ${i} ]]; then
                for j in "${i}"/*.png;
                do
                    doins "${j}";
                    ((ret+=$?));
                done;
            else
                ((++ret));
            fi;
        fi;
    done;
    exit ${ret} )
}
domenu () 
{ 
    ( local i j ret=0;
    insinto /usr/share/applications;
    for i in "$@";
    do
        if [[ -f ${i} ]]; then
            doins "${i}";
            ((ret+=$?));
        else
            if [[ -d ${i} ]]; then
                for j in "${i}"/*.desktop;
                do
                    doins "${j}";
                    ((ret+=$?));
                done;
            else
                ((++ret));
            fi;
        fi;
    done;
    exit ${ret} )
}
dump_trace () 
{ 
    local funcname="" sourcefile="" lineno="" s="yes" n p;
    declare -i strip=${1:-1};
    local filespacing=$2 linespacing=$3;
    (( n = ${#FUNCNAME[@]} - 1 ));
    (( p = ${#BASH_ARGV[@]} ));
    while (( n > 0 )); do
        [ "${FUNCNAME[${n}]}" == "qa_call" ] && break;
        (( p -= ${BASH_ARGC[${n}]} ));
        (( n-- ));
    done;
    if (( n == 0 )); then
        (( n = ${#FUNCNAME[@]} - 1 ));
        (( p = ${#BASH_ARGV[@]} ));
    fi;
    eerror "Call stack:";
    while (( n > ${strip} )); do
        funcname=${FUNCNAME[${n} - 1]};
        sourcefile=$(basename "${BASH_SOURCE[${n}]}");
        lineno=${BASH_LINENO[${n} - 1]};
        args=;
        if [[ -n "${BASH_ARGV[@]}" ]]; then
            for ((j = 1 ; j <= ${BASH_ARGC[${n} - 1]} ; ++j ))
            do
                newarg=${BASH_ARGV[$(( p - j - 1 ))]};
                args="${args:+${args} }'${newarg}'";
            done;
            (( p -= ${BASH_ARGC[${n} - 1]} ));
        fi;
        eerror "  $(printf "%${filespacing}s" "${sourcefile}"), line $(printf "%${linespacing}s" "${lineno}"):  Called ${funcname}${args:+ ${args}}";
        (( n-- ));
    done
}
dyn_clean () 
{ 
    if [ -z "${PORTAGE_BUILDDIR}" ]; then
        echo "Aborting clean phase because PORTAGE_BUILDDIR is unset!";
        return 1;
    else
        if [ ! -d "${PORTAGE_BUILDDIR}" ]; then
            return 0;
        fi;
    fi;
    if hasq chflags $FEATURES; then
        chflags -R noschg,nouchg,nosappnd,nouappnd "${PORTAGE_BUILDDIR}";
        chflags -R nosunlnk,nouunlnk "${PORTAGE_BUILDDIR}" 2> /dev/null;
    fi;
    rm -rf "${PORTAGE_BUILDDIR}/image" "${PORTAGE_BUILDDIR}/homedir";
    rm -f "${PORTAGE_BUILDDIR}/.installed";
    if [[ $EMERGE_FROM = binary ]] || ! hasq keeptemp $FEATURES && ! hasq keepwork $FEATURES; then
        rm -rf "${T}";
    fi;
    if [[ $EMERGE_FROM = binary ]] || ! hasq keepwork $FEATURES; then
        rm -f "$PORTAGE_BUILDDIR"/.{ebuild_changed,logid,pretended,setuped,unpacked,prepared} "$PORTAGE_BUILDDIR"/.{configured,compiled,tested,packaged} "$PORTAGE_BUILDDIR"/.die_hooks "$PORTAGE_BUILDDIR"/.ipc_{in,out,lock} "$PORTAGE_BUILDDIR"/.exit_status;
        rm -rf "${PORTAGE_BUILDDIR}/build-info";
        rm -rf "${WORKDIR}";
    fi;
    if [ -f "${PORTAGE_BUILDDIR}/.unpacked" ]; then
        find "${PORTAGE_BUILDDIR}" -type d ! -regex "^${WORKDIR}" | sort -r | tr "\n" "\0" | $XARGS -0 rmdir &>/dev/null;
    fi;
    rm -rf "${PORTAGE_BUILDDIR}/distdir";
    cd "$PORTAGE_BUILDDIR"/../..;
    rmdir "$PORTAGE_BUILDDIR" "${PORTAGE_BUILDDIR%/*}" 2> /dev/null;
    true
}
dyn_compile () 
{ 
    if [[ -e $PORTAGE_BUILDDIR/.compiled ]]; then
        vecho ">>> It appears that '${PF}' is already compiled; skipping.";
        vecho ">>> Remove '$PORTAGE_BUILDDIR/.compiled' to force compilation.";
        return 0;
    fi;
    if [[ -d $S ]]; then
        cd "${S}";
    else
        if hasq $EAPI 0 1 2 3 3_pre2; then
            cd "${WORKDIR}";
        else
            if [[ -z ${A} ]] && ! has_phase_defined_up_to compile; then
                cd "${WORKDIR}";
            else
                die "The source directory '${S}' doesn't exist";
            fi;
        fi;
    fi;
    trap abort_compile SIGINT SIGQUIT;
    ebuild_phase pre_src_compile;
    vecho ">>> Compiling source in $PWD ...";
    ebuild_phase src_compile;
     >> "$PORTAGE_BUILDDIR/.compiled" || die "Failed to create $PORTAGE_BUILDDIR/.compiled";
    vecho ">>> Source compiled.";
    ebuild_phase post_src_compile;
    trap - SIGINT SIGQUIT
}
dyn_configure () 
{ 
    if [[ -e $PORTAGE_BUILDDIR/.configured ]]; then
        vecho ">>> It appears that '$PF' is already configured; skipping.";
        vecho ">>> Remove '$PORTAGE_BUILDDIR/.configured' to force configuration.";
        return 0;
    fi;
    if [[ -d $S ]]; then
        cd "${S}";
    else
        if hasq $EAPI 0 1 2 3 3_pre2; then
            cd "${WORKDIR}";
        else
            if [[ -z ${A} ]] && ! has_phase_defined_up_to configure; then
                cd "${WORKDIR}";
            else
                die "The source directory '${S}' doesn't exist";
            fi;
        fi;
    fi;
    trap abort_configure SIGINT SIGQUIT;
    ebuild_phase pre_src_configure;
    vecho ">>> Configuring source in $PWD ...";
    ebuild_phase src_configure;
     >> "$PORTAGE_BUILDDIR/.configured" || die "Failed to create $PORTAGE_BUILDDIR/.configured";
    vecho ">>> Source configured.";
    ebuild_phase post_src_configure;
    trap - SIGINT SIGQUIT
}
dyn_help () 
{ 
    echo;
    echo "Portage";
    echo "Copyright 1999-2010 Gentoo Foundation";
    echo;
    echo "How to use the ebuild command:";
    echo;
    echo "The first argument to ebuild should be an existing .ebuild file.";
    echo;
    echo "One or more of the following options can then be specified.  If more";
    echo "than one option is specified, each will be executed in order.";
    echo;
    echo "  help        : show this help screen";
    echo "  pretend     : execute package specific pretend actions";
    echo "  setup       : execute package specific setup actions";
    echo "  fetch       : download source archive(s) and patches";
    echo "  digest      : create a manifest file for the package";
    echo "  manifest    : create a manifest file for the package";
    echo "  unpack      : unpack sources (auto-dependencies if needed)";
    echo "  prepare     : prepare sources (auto-dependencies if needed)";
    echo "  configure   : configure sources (auto-fetch/unpack if needed)";
    echo "  compile     : compile sources (auto-fetch/unpack/configure if needed)";
    echo "  test        : test package (auto-fetch/unpack/configure/compile if needed)";
    echo "  preinst     : execute pre-install instructions";
    echo "  postinst    : execute post-install instructions";
    echo "  install     : install the package to the temporary install directory";
    echo "  qmerge      : merge image into live filesystem, recording files in db";
    echo "  merge       : do fetch, unpack, compile, install and qmerge";
    echo "  prerm       : execute pre-removal instructions";
    echo "  postrm      : execute post-removal instructions";
    echo "  unmerge     : remove package from live filesystem";
    echo "  config      : execute package specific configuration actions";
    echo "  package     : create a tarball package in ${PKGDIR}/All";
    echo "  rpm         : build a RedHat RPM package";
    echo "  clean       : clean up all source and temporary files";
    echo;
    echo "The following settings will be used for the ebuild process:";
    echo;
    echo "  package     : ${PF}";
    echo "  slot        : ${SLOT}";
    echo "  category    : ${CATEGORY}";
    echo "  description : ${DESCRIPTION}";
    echo "  system      : ${CHOST}";
    echo "  c flags     : ${CFLAGS}";
    echo "  c++ flags   : ${CXXFLAGS}";
    echo "  make flags  : ${MAKEOPTS}";
    echo -n "  build mode  : ";
    if hasq nostrip ${FEATURES} ${RESTRICT} || hasq strip ${RESTRICT}; then
        echo "debug (large)";
    else
        echo "production (stripped)";
    fi;
    echo "  merge to    : ${ROOT}";
    echo;
    if [ -n "$USE" ]; then
        echo "Additionally, support for the following optional features will be enabled:";
        echo;
        echo "  ${USE}";
    fi;
    echo
}
dyn_install () 
{ 
    [ -z "$PORTAGE_BUILDDIR" ] && die "${FUNCNAME}: PORTAGE_BUILDDIR is unset";
    if hasq noauto $FEATURES; then
        rm -f "${PORTAGE_BUILDDIR}/.installed";
    else
        if [[ -e $PORTAGE_BUILDDIR/.installed ]]; then
            vecho ">>> It appears that '${PF}' is already installed; skipping.";
            vecho ">>> Remove '${PORTAGE_BUILDDIR}/.installed' to force install.";
            return 0;
        fi;
    fi;
    trap "abort_install" SIGINT SIGQUIT;
    ebuild_phase pre_src_install;
    rm -rf "${PORTAGE_BUILDDIR}/image";
    mkdir "${PORTAGE_BUILDDIR}/image";
    if [[ -d $S ]]; then
        cd "${S}";
    else
        if hasq $EAPI 0 1 2 3 3_pre2; then
            cd "${WORKDIR}";
        else
            if [[ -z ${A} ]] && ! has_phase_defined_up_to install; then
                cd "${WORKDIR}";
            else
                die "The source directory '${S}' doesn't exist";
            fi;
        fi;
    fi;
    vecho;
    vecho ">>> Install ${PF} into ${D} category ${CATEGORY}";
    export S D;
    export DESTTREE=/usr;
    export INSDESTTREE="";
    export _E_EXEDESTTREE_="";
    export _E_DOCDESTTREE_="";
    ebuild_phase src_install;
     >> "$PORTAGE_BUILDDIR/.installed" || die "Failed to create $PORTAGE_BUILDDIR/.installed";
    vecho ">>> Completed installing ${PF} into ${D}";
    vecho;
    ebuild_phase post_src_install;
    cd "${PORTAGE_BUILDDIR}"/build-info;
    set -f;
    local f x;
    IFS=' 	

';
    for f in CATEGORY DEFINED_PHASES FEATURES INHERITED IUSE REQUIRED_USE PF PKGUSE SLOT KEYWORDS HOMEPAGE DESCRIPTION;
    do
        x=$(echo -n ${!f});
        [[ -n $x ]] && echo "$x" > $f;
    done;
    if [[ $CATEGORY != virtual ]]; then
        for f in ASFLAGS CBUILD CC CFLAGS CHOST CTARGET CXX CXXFLAGS EXTRA_ECONF EXTRA_EINSTALL EXTRA_MAKE LDFLAGS LIBCFLAGS LIBCXXFLAGS;
        do
            x=$(echo -n ${!f});
            [[ -n $x ]] && echo "$x" > $f;
        done;
    fi;
    echo "${USE}" > USE;
    echo "${EAPI:-0}" > EAPI;
    set +f;
    unset f;
    save_ebuild_env --exclude-init-phases | filter_readonly_variables --filter-path --filter-sandbox --allow-extra-vars > environment;
    assert "save_ebuild_env failed";
    ${PORTAGE_BZIP2_COMMAND} -f9 environment;
    cp "${EBUILD}" "${PF}.ebuild";
    [ -n "${PORTAGE_REPO_NAME}" ] && echo "${PORTAGE_REPO_NAME}" > repository;
    if hasq nostrip ${FEATURES} ${RESTRICT} || hasq strip ${RESTRICT}; then
         >> DEBUGBUILD;
    fi;
    trap - SIGINT SIGQUIT
}
dyn_preinst () 
{ 
    if [ -z "${D}" ]; then
        eerror "${FUNCNAME}: D is unset";
        return 1;
    fi;
    ebuild_phase_with_hooks pkg_preinst
}
dyn_prepare () 
{ 
    if [[ -e $PORTAGE_BUILDDIR/.prepared ]]; then
        vecho ">>> It appears that '$PF' is already prepared; skipping.";
        vecho ">>> Remove '$PORTAGE_BUILDDIR/.prepared' to force prepare.";
        return 0;
    fi;
    if [[ -d $S ]]; then
        cd "${S}";
    else
        if hasq $EAPI 0 1 2 3 3_pre2; then
            cd "${WORKDIR}";
        else
            if [[ -z ${A} ]] && ! has_phase_defined_up_to prepare; then
                cd "${WORKDIR}";
            else
                die "The source directory '${S}' doesn't exist";
            fi;
        fi;
    fi;
    trap abort_prepare SIGINT SIGQUIT;
    ebuild_phase pre_src_prepare;
    vecho ">>> Preparing source in $PWD ...";
    ebuild_phase src_prepare;
     >> "$PORTAGE_BUILDDIR/.prepared" || die "Failed to create $PORTAGE_BUILDDIR/.prepared";
    vecho ">>> Source prepared.";
    ebuild_phase post_src_prepare;
    trap - SIGINT SIGQUIT
}
dyn_pretend () 
{ 
    if [[ -e $PORTAGE_BUILDDIR/.pretended ]]; then
        vecho ">>> It appears that '$PF' is already pretended; skipping.";
        vecho ">>> Remove '$PORTAGE_BUILDDIR/.pretended' to force pretend.";
        return 0;
    fi;
    ebuild_phase pre_pkg_pretend;
    ebuild_phase pkg_pretend;
     >> "$PORTAGE_BUILDDIR/.pretended" || die "Failed to create $PORTAGE_BUILDDIR/.pretended";
    ebuild_phase post_pkg_pretend
}
dyn_setup () 
{ 
    if [[ -e $PORTAGE_BUILDDIR/.setuped ]]; then
        vecho ">>> It appears that '$PF' is already setup; skipping.";
        vecho ">>> Remove '$PORTAGE_BUILDDIR/.setuped' to force setup.";
        return 0;
    fi;
    ebuild_phase pre_pkg_setup;
    ebuild_phase pkg_setup;
     >> "$PORTAGE_BUILDDIR/.setuped" || die "Failed to create $PORTAGE_BUILDDIR/.setuped";
    ebuild_phase post_pkg_setup
}
dyn_test () 
{ 
    if [[ -e $PORTAGE_BUILDDIR/.tested ]]; then
        vecho ">>> It appears that ${PN} has already been tested; skipping.";
        vecho ">>> Remove '${PORTAGE_BUILDDIR}/.tested' to force test.";
        return;
    fi;
    if [ "${EBUILD_FORCE_TEST}" == "1" ]; then
        ! hasq test ${USE} && export USE="${USE} test";
    fi;
    trap "abort_test" SIGINT SIGQUIT;
    if [ -d "${S}" ]; then
        cd "${S}";
    else
        cd "${WORKDIR}";
    fi;
    if ! hasq test $FEATURES && [ "${EBUILD_FORCE_TEST}" != "1" ]; then
        vecho ">>> Test phase [not enabled]: ${CATEGORY}/${PF}";
    else
        if hasq test $RESTRICT; then
            einfo "Skipping make test/check due to ebuild restriction.";
            vecho ">>> Test phase [explicitly disabled]: ${CATEGORY}/${PF}";
        else
            local save_sp=${SANDBOX_PREDICT};
            addpredict /;
            ebuild_phase pre_src_test;
            ebuild_phase src_test;
             >> "$PORTAGE_BUILDDIR/.tested" || die "Failed to create $PORTAGE_BUILDDIR/.tested";
            ebuild_phase post_src_test;
            SANDBOX_PREDICT=${save_sp};
        fi;
    fi;
    trap - SIGINT SIGQUIT
}
dyn_unpack () 
{ 
    local newstuff="no";
    if [ -e "${WORKDIR}" ]; then
        local x;
        local checkme;
        for x in $A;
        do
            vecho ">>> Checking ${x}'s mtime...";
            if [ "${PORTAGE_ACTUAL_DISTDIR:-${DISTDIR}}/${x}" -nt "${WORKDIR}" ]; then
                vecho ">>> ${x} has been updated; recreating WORKDIR...";
                newstuff="yes";
                break;
            fi;
        done;
        if [ ! -f "${PORTAGE_BUILDDIR}/.unpacked" ]; then
            vecho ">>> Not marked as unpacked; recreating WORKDIR...";
            newstuff="yes";
        fi;
    fi;
    if [ "${newstuff}" == "yes" ]; then
        rm -rf "${PORTAGE_BUILDDIR}"/{.setuped,.unpacked,.prepared,.configured,.compiled,.tested,.installed,.packaged,build-info};
        if ! hasq keepwork $FEATURES; then
            rm -rf "${WORKDIR}";
        fi;
        if [ -d "${T}" ] && ! hasq keeptemp $FEATURES; then
            rm -rf "${T}" && mkdir "${T}";
        fi;
    fi;
    if [ -e "${WORKDIR}" ]; then
        if [ "$newstuff" == "no" ]; then
            vecho ">>> WORKDIR is up-to-date, keeping...";
            return 0;
        fi;
    fi;
    if [ ! -d "${WORKDIR}" ]; then
        install -m${PORTAGE_WORKDIR_MODE:-0700} -d "${WORKDIR}" || die "Failed to create dir '${WORKDIR}'";
    fi;
    cd "${WORKDIR}" || die "Directory change failed: \`cd '${WORKDIR}'\`";
    ebuild_phase pre_src_unpack;
    vecho ">>> Unpacking source...";
    ebuild_phase src_unpack;
     >> "$PORTAGE_BUILDDIR/.unpacked" || die "Failed to create $PORTAGE_BUILDDIR/.unpacked";
    vecho ">>> Source unpacked in ${WORKDIR}";
    ebuild_phase post_src_unpack
}
eaclocal () 
{ 
    local aclocal_opts;
    local amflags_file;
    for amflags_file in GNUmakefile.am Makefile.am GNUmakefile.in Makefile.in;
    do
        [[ -e ${amflags_file} ]] || continue;
        aclocal_opts=$(sed -n '/^ACLOCAL_AMFLAGS[[:space:]]*=/s:[^=]*=::p' ${amflags_file});
        eval aclocal_opts=\"${aclocal_opts}\";
        break;
    done;
    if [[ -n ${AT_M4DIR} ]]; then
        for x in ${AT_M4DIR};
        do
            case "${x}" in 
                "-I")

                ;;
                *)
                    [[ ! -d ${x} ]] && ewarn "eaclocal: '${x}' does not exist";
                    aclocal_opts="${aclocal_opts} -I ${x}"
                ;;
            esac;
        done;
    fi;
    [[ ! -f aclocal.m4 || -n $(grep -e 'generated.*by aclocal' aclocal.m4) ]] && autotools_run_tool aclocal "$@" ${aclocal_opts}
}
eautoconf () 
{ 
    if [[ ! -f configure.ac && ! -f configure.in ]]; then
        echo;
        eerror "No configure.{ac,in} present in '${PWD}'!";
        echo;
        die "No configure.{ac,in} present!";
    fi;
    autotools_run_tool autoconf "$@"
}
eautoheader () 
{ 
    [[ -n $(autotools_check_macro "AC_CONFIG_HEADERS") ]] || return 0;
    NO_FAIL=1 autotools_run_tool autoheader "$@"
}
eautomake () 
{ 
    local extra_opts;
    local makefile_name;
    for makefile_name in {GNUmakefile,{M,m}akefile}.{am,in} "";
    do
        [[ -f ${makefile_name} ]] && break;
    done;
    [[ -z ${makefile_name} ]] && return 0;
    if [[ ${makefile_name} == *.in ]]; then
        if ! grep -qs AM_INIT_AUTOMAKE configure.??; then
            return 0;
        fi;
    else
        if [[ -z ${FROM_EAUTORECONF} && -f ${makefile_name%.am}.in ]]; then
            local used_automake;
            local installed_automake;
            installed_automake=$(WANT_AUTOMAKE= automake --version | head -n 1 | 			sed -e 's:.*(GNU automake) ::');
            used_automake=$(head -n 1 < ${makefile_name%.am}.in | 			sed -e 's:.*by automake \(.*\) from .*:\1:');
            if [[ ${installed_automake} != ${used_automake} ]]; then
                einfo "Automake used for the package (${used_automake}) differs from";
                einfo "the installed version (${installed_automake}).";
                eautoreconf;
                return 0;
            fi;
        fi;
    fi;
    [[ -f INSTALL && -f AUTHORS && -f ChangeLog && -f NEWS ]] || extra_opts="${extra_opts} --foreign";
    autotools_run_tool automake --add-missing --copy ${extra_opts} "$@"
}
eautopoint () 
{ 
    autotools_run_tool autopoint "$@"
}
eautoreconf () 
{ 
    local x auxdir g;
    if [[ -z ${AT_NO_RECURSIVE} ]]; then
        for x in $(autotools_get_subdirs);
        do
            if [[ -d ${x} ]]; then
                pushd "${x}" > /dev/null;
                AT_NOELIBTOOLIZE="yes" eautoreconf;
                popd > /dev/null;
            fi;
        done;
    fi;
    auxdir=$(autotools_get_auxdir);
    einfo "Running eautoreconf in '${PWD}' ...";
    [[ -n ${auxdir} ]] && mkdir -p ${auxdir};
    eaclocal;
    [[ ${CHOST} == *-darwin* ]] && g=g;
    if ${LIBTOOLIZE:-${g}libtoolize} -n --install &>/dev/null; then
        _elibtoolize --copy --force --install;
    else
        _elibtoolize --copy --force;
    fi;
    eautoconf;
    eautoheader;
    FROM_EAUTORECONF="yes" eautomake ${AM_OPTS};
    [[ ${AT_NOELIBTOOLIZE} == "yes" ]] && return 0;
    S=${PWD} elibtoolize;
    return 0
}
ebeep () 
{ 
    ewarn "QA Notice: ebeep is not defined in EAPI=${EAPI}, please file a bug at http://bugs.gentoo.org"
}
ebegin () 
{ 
    local msg="$*" dots spaces=${RC_DOT_PATTERN//?/ };
    if [[ -n ${RC_DOT_PATTERN} ]]; then
        dots=$(printf "%$(( COLS - 3 - ${#RC_INDENTATION} - ${#msg} - 7 ))s" '');
        dots=${dots//${spaces}/${RC_DOT_PATTERN}};
        msg="${msg}${dots}";
    else
        msg="${msg} ...";
    fi;
    einfon "${msg}";
    [[ ${RC_ENDCOL} == "yes" ]] && echo;
    LAST_E_LEN=$(( 3 + ${#RC_INDENTATION} + ${#msg} ));
    LAST_E_CMD="ebegin";
    return 0
}
ebuild_main () 
{ 
    export EBUILD_MASTER_PID=$BASHPID;
    trap 'exit 1' SIGTERM;
    if [[ $EBUILD_PHASE != depend ]]; then
        hasq ccache $FEATURES || export CCACHE_DISABLE=1;
        local phase_func=$(_ebuild_arg_to_phase "$EAPI" "$EBUILD_PHASE");
        [[ -n $phase_func ]] && _ebuild_phase_funcs "$EAPI" "$phase_func";
        unset phase_func;
    fi;
    source_all_bashrcs;
    case ${EBUILD_SH_ARGS} in 
        nofetch)
            ebuild_phase_with_hooks pkg_nofetch
        ;;
        prerm | postrm | postinst | config | info)
            if hasq "$EBUILD_SH_ARGS" config info && ! declare -F "pkg_$EBUILD_SH_ARGS" > /dev/null; then
                ewarn "pkg_${EBUILD_SH_ARGS}() is not defined: '${EBUILD##*/}'";
            fi;
            export SANDBOX_ON="0";
            if [ "${PORTAGE_DEBUG}" != "1" ] || [ "${-/x/}" != "$-" ]; then
                ebuild_phase_with_hooks pkg_${EBUILD_SH_ARGS};
            else
                set -x;
                ebuild_phase_with_hooks pkg_${EBUILD_SH_ARGS};
                set +x;
            fi;
            if [[ $EBUILD_PHASE == postinst ]] && [[ -n $PORTAGE_UPDATE_ENV ]]; then
                save_ebuild_env --exclude-init-phases | filter_readonly_variables --filter-path --filter-sandbox --allow-extra-vars | ${PORTAGE_BZIP2_COMMAND} -c -f9 > "$PORTAGE_UPDATE_ENV";
                assert "save_ebuild_env failed";
            fi
        ;;
        unpack | prepare | configure | compile | test | clean | install)
            if [[ ${SANDBOX_DISABLED:-0} = 0 ]]; then
                export SANDBOX_ON="1";
            else
                export SANDBOX_ON="0";
            fi;
            case "$EBUILD_SH_ARGS" in 
                configure | compile)
                    local x;
                    for x in ASFLAGS CCACHE_DIR CCACHE_SIZE CFLAGS CXXFLAGS LDFLAGS LIBCFLAGS LIBCXXFLAGS;
                    do
                        [[ ${!x+set} = set ]] && export $x;
                    done;
                    unset x;
                    hasq distcc $FEATURES && [[ -n $DISTCC_DIR ]] && [[ ${SANDBOX_WRITE/$DISTCC_DIR} = $SANDBOX_WRITE ]] && addwrite "$DISTCC_DIR";
                    x=LIBDIR_$ABI;
                    [ -z "$PKG_CONFIG_PATH" -a -n "$ABI" -a -n "${!x}" ] && export PKG_CONFIG_PATH=/usr/${!x}/pkgconfig;
                    if hasq noauto $FEATURES && [[ ! -f $PORTAGE_BUILDDIR/.unpacked ]]; then
                        echo;
                        echo "!!! We apparently haven't unpacked..." "This is probably not what you";
                        echo "!!! want to be doing... You are using" "FEATURES=noauto so I'll assume";
                        echo "!!! that you know what you are doing..." "You have 5 seconds to abort...";
                        echo;
                        local x;
                        for x in 1 2 3 4 5 6 7 8;
                        do
                            LC_ALL=C sleep 0.25;
                        done;
                        sleep 3;
                    fi;
                    cd "$PORTAGE_BUILDDIR";
                    if [ ! -d build-info ]; then
                        mkdir build-info;
                        cp "$EBUILD" "build-info/$PF.ebuild";
                    fi;
                    export S D
                ;;
            esac;
            if [ "${PORTAGE_DEBUG}" != "1" ] || [ "${-/x/}" != "$-" ]; then
                dyn_${EBUILD_SH_ARGS};
            else
                set -x;
                dyn_${EBUILD_SH_ARGS};
                set +x;
            fi;
            export SANDBOX_ON="0"
        ;;
        help | pretend | setup | preinst)
            export SANDBOX_ON="0";
            if [ "${PORTAGE_DEBUG}" != "1" ] || [ "${-/x/}" != "$-" ]; then
                dyn_${EBUILD_SH_ARGS};
            else
                set -x;
                dyn_${EBUILD_SH_ARGS};
                set +x;
            fi
        ;;
        depend)
            export SANDBOX_ON="0";
            set -f;
            if [ -n "${dbkey}" ]; then
                if [ ! -d "${dbkey%/*}" ]; then
                    install -d -g ${PORTAGE_GID} -m2775 "${dbkey%/*}";
                fi;
                umask 002;
            fi;
            auxdbkeys="DEPEND RDEPEND SLOT SRC_URI RESTRICT HOMEPAGE LICENSE
			DESCRIPTION KEYWORDS INHERITED IUSE REQUIRED_USE PDEPEND PROVIDE EAPI
			PROPERTIES DEFINED_PHASES UNUSED_05 UNUSED_04
			UNUSED_03 UNUSED_02 UNUSED_01";
            [ -n "${EAPI}" ] || EAPI=0;
            if [ -n "${dbkey}" ]; then
                 > "${dbkey}";
                for f in ${auxdbkeys};
                do
                    echo $(echo ${!f}) >> "${dbkey}" || exit $?;
                done;
            else
                for f in ${auxdbkeys};
                do
                    echo $(echo ${!f}) 1>&9 || exit $?;
                done;
                exec 9>&-;
            fi;
            set +f
        ;;
        _internal_test)

        ;;
        *)
            export SANDBOX_ON="1";
            echo "Unrecognized EBUILD_SH_ARGS: '${EBUILD_SH_ARGS}'";
            echo;
            dyn_help;
            exit 1
        ;;
    esac
}
ebuild_phase () 
{ 
    declare -F "$1" > /dev/null && qa_call $1
}
ebuild_phase_with_hooks () 
{ 
    local x phase_name=${1};
    for x in {pre_,,post_}${phase_name};
    do
        ebuild_phase ${x};
    done
}
econf () 
{ 
    local x;
    local phase_func=$(_ebuild_arg_to_phase "$EAPI" "$EBUILD_PHASE");
    if [[ -n $phase_func ]]; then
        if hasq "$EAPI" 0 1; then
            [[ $phase_func != src_compile ]] && eqawarn "QA Notice: econf called in" "$phase_func instead of src_compile";
        else
            [[ $phase_func != src_configure ]] && eqawarn "QA Notice: econf called in" "$phase_func instead of src_configure";
        fi;
    fi;
    : ${ECONF_SOURCE:=.};
    if [ -x "${ECONF_SOURCE}/configure" ]; then
        if [[ -n $CONFIG_SHELL && "$(head -n1 "$ECONF_SOURCE/configure")" =~ ^'#!'[[:space:]]*/bin/sh([[:space:]]|$) ]]; then
            sed -e "1s:^#![[:space:]]*/bin/sh:#!$CONFIG_SHELL:" -i "$ECONF_SOURCE/configure" || die "Substition of shebang in '$ECONF_SOURCE/configure' failed";
        fi;
        if [ -e /usr/share/gnuconfig/ ]; then
            find "${WORKDIR}" -type f '(' -name config.guess -o -name config.sub ')' -print0 | while read -r -d '' x; do
                vecho " * econf: updating ${x/${WORKDIR}\/} with /usr/share/gnuconfig/${x##*/}";
                cp -f /usr/share/gnuconfig/"${x##*/}" "${x}";
            done;
        fi;
        if ! hasq "$EAPI" 0 1 2 3 3_pre2 && "${ECONF_SOURCE}/configure" --help 2> /dev/null | grep -q disable-dependency-tracking; then
            set -- --disable-dependency-tracking "$@";
        fi;
        local CONF_LIBDIR LIBDIR_VAR="LIBDIR_${ABI}";
        if [[ -n ${ABI} && -n ${!LIBDIR_VAR} ]]; then
            CONF_LIBDIR=${!LIBDIR_VAR};
        fi;
        if [[ -n ${CONF_LIBDIR} ]] && ! hasgq --libdir=\* "$@"; then
            export CONF_PREFIX=$(hasg --exec-prefix=\* "$@");
            [[ -z ${CONF_PREFIX} ]] && CONF_PREFIX=$(hasg --prefix=\* "$@");
            : ${CONF_PREFIX:=/usr};
            CONF_PREFIX=${CONF_PREFIX#*=};
            [[ ${CONF_PREFIX} != /* ]] && CONF_PREFIX="/${CONF_PREFIX}";
            [[ ${CONF_LIBDIR} != /* ]] && CONF_LIBDIR="/${CONF_LIBDIR}";
            set -- --libdir="$(strip_duplicate_slashes ${CONF_PREFIX}${CONF_LIBDIR})" "$@";
        fi;
        set -- --prefix=/usr ${CBUILD:+--build=${CBUILD}} --host=${CHOST} ${CTARGET:+--target=${CTARGET}} --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib "$@" ${EXTRA_ECONF};
        vecho "${ECONF_SOURCE}/configure" "$@";
        if ! "${ECONF_SOURCE}/configure" "$@"; then
            if [ -s config.log ]; then
                echo;
                echo "!!! Please attach the following file when seeking support:";
                echo "!!! ${PWD}/config.log";
            fi;
            die "econf failed";
        fi;
    else
        if [ -f "${ECONF_SOURCE}/configure" ]; then
            die "configure is not executable";
        else
            die "no configure script found";
        fi;
    fi
}
ecvs_clean () 
{ 
    [[ -z $* ]] && set -- .;
    find "$@" -type d -name 'CVS' -prune -print0 | xargs -0 rm -rf;
    find "$@" -type f -name '.cvs*' -print0 | xargs -0 rm -rf
}
edos2unix () 
{ 
    echo "$@" | xargs sed -i 's/\r$//'
}
eend () 
{ 
    local retval=${1:-0};
    shift;
    _eend ${retval} eerror "$*";
    LAST_E_CMD="eend";
    return ${retval}
}
eerror () 
{ 
    elog_base ERROR "$*";
    [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo;
    echo -e "$@" | while read -r; do
        echo " $BAD*$NORMAL $RC_INDENTATION$REPLY" 1>&2;
    done;
    LAST_E_CMD="eerror";
    return 0
}
egetent () 
{ 
    case ${CHOST} in 
        *-darwin[678])
            case "$2" in 
                *[!0-9]*)
                    nidump $1 . | awk -F":" "{ if (\$1 ~ /^$2$/) {print \$0;exit;} }"
                ;;
                *)
                    nidump $1 . | awk -F":" "{ if (\$3 == $2) {print \$0;exit;} }"
                ;;
            esac
        ;;
        *-darwin*)
            local mytype=$1;
            [[ "passwd" == $mytype ]] && mytype="Users";
            [[ "group" == $mytype ]] && mytype="Groups";
            case "$2" in 
                *[!0-9]*)
                    dscl . -read /$mytype/$2 2> /dev/null | grep RecordName
                ;;
                *)
                    local mykey="UniqueID";
                    [[ $mytype == "Groups" ]] && mykey="PrimaryGroupID";
                    dscl . -search /$mytype $mykey $2 2> /dev/null
                ;;
            esac
        ;;
        *-freebsd* | *-dragonfly*)
            local opts action="user";
            [[ $1 == "passwd" ]] || action="group";
            if [[ $2 == [[:digit:]]* ]]; then
                [[ ${action} == "user" ]] && opts="-u" || opts="-g";
            fi;
            pw show ${action} ${opts} "$2" -q
        ;;
        *-netbsd* | *-openbsd*)
            grep "$2:\*:" /etc/$1
        ;;
        *)
            type -p nscd &>/dev/null && nscd -i "$1";
            getent "$1" "$2"
        ;;
    esac
}
egethome () 
{ 
    ent=$(egetent passwd $1);
    case ${CHOST} in 
        *-darwin* | *-freebsd* | *-dragonfly*)
            echo ${ent} | cut -d: -f9
        ;;
        *)
            echo ${ent} | cut -d: -f6
        ;;
    esac
}
egetshell () 
{ 
    ent=$(egetent passwd "$1");
    case ${CHOST} in 
        *-darwin* | *-freebsd* | *-dragonfly*)
            echo ${ent} | cut -d: -f10
        ;;
        *)
            echo ${ent} cut -d: -f7
        ;;
    esac
}
einfo () 
{ 
    elog_base INFO "$*";
    [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo;
    echo -e "$@" | while read -r; do
        echo " $GOOD*$NORMAL $REPLY";
    done;
    LAST_E_CMD="einfo";
    return 0
}
einfon () 
{ 
    elog_base INFO "$*";
    [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo;
    echo -ne " ${GOOD}*${NORMAL} $*";
    LAST_E_CMD="einfon";
    return 0
}
einstall () 
{ 
    local LOCAL_EXTRA_EINSTALL="${EXTRA_EINSTALL}";
    LIBDIR_VAR="LIBDIR_${ABI}";
    if [ -n "${ABI}" -a -n "${!LIBDIR_VAR}" ]; then
        CONF_LIBDIR="${!LIBDIR_VAR}";
    fi;
    unset LIBDIR_VAR;
    if [ -n "${CONF_LIBDIR}" ] && [ "${CONF_PREFIX:+set}" = set ]; then
        EI_DESTLIBDIR="${D}/${CONF_PREFIX}/${CONF_LIBDIR}";
        EI_DESTLIBDIR="$(strip_duplicate_slashes ${EI_DESTLIBDIR})";
        LOCAL_EXTRA_EINSTALL="libdir=${EI_DESTLIBDIR} ${LOCAL_EXTRA_EINSTALL}";
        unset EI_DESTLIBDIR;
    fi;
    if [ -f ./[mM]akefile -o -f ./GNUmakefile ]; then
        if [ "${PORTAGE_DEBUG}" == "1" ]; then
            ${MAKE:-make} -n prefix="${D}usr" datadir="${D}usr/share" infodir="${D}usr/share/info" localstatedir="${D}var/lib" mandir="${D}usr/share/man" sysconfdir="${D}etc" ${LOCAL_EXTRA_EINSTALL} ${MAKEOPTS} ${EXTRA_EMAKE} -j1 "$@" install;
        fi;
        ${MAKE:-make} prefix="${D}usr" datadir="${D}usr/share" infodir="${D}usr/share/info" localstatedir="${D}var/lib" mandir="${D}usr/share/man" sysconfdir="${D}etc" ${LOCAL_EXTRA_EINSTALL} ${MAKEOPTS} ${EXTRA_EMAKE} -j1 "$@" install || die "einstall failed";
    else
        die "no Makefile found";
    fi
}
elibtoolize () 
{ 
    local x;
    local do_portage="no";
    local do_reversedeps="no";
    local do_only_patches="no";
    local do_uclibc="yes";
    local deptoremove=;
    local do_shallow="no";
    local elt_patches="install-sh ltmain portage relink max_cmd_len sed test tmp cross as-needed";
    for x in "$@";
    do
        case ${x} in 
            --portage)
                do_portage="yes"
            ;;
            --reverse-deps)
                do_reversedeps="yes";
                elt_patches+=" fix-relink"
            ;;
            --patch-only)
                do_only_patches="yes"
            ;;
            --remove-internal-dep=*)
                deptoremove=${x#--remove-internal-dep=};
                [[ -n ${deptoremove} ]] && elt_patches+=" rem-int-dep"
            ;;
            --shallow)
                do_shallow="yes"
            ;;
            --no-uclibc)
                do_uclibc="no"
            ;;
            *)
                eerror "Invalid elibtoolize option: ${x}";
                die "elibtoolize called with ${x} ??"
            ;;
        esac;
    done;
    [[ ${do_uclibc} == "yes" ]] && elt_patches+=" uclibc-conf uclibc-ltconf";
    case ${CHOST} in 
        *-aix*)
            elt_patches+=" hardcode aixrtl aix-noundef"
        ;;
        *-darwin*)
            elt_patches+=" darwin-ltconf darwin-ltmain darwin-conf"
        ;;
        *-freebsd*)
            elt_patches+=" fbsd-conf fbsd-ltconf"
        ;;
        *-hpux*)
            elt_patches+=" hpux-conf deplibs hc-flag-ld hardcode hardcode-relink relink-prog no-lc"
        ;;
        *-irix*)
            elt_patches+=" irix-ltmain"
        ;;
        *-mint*)
            elt_patches+=" mint-conf"
        ;;
    esac;
    set --;
    if [[ ${do_shallow} == "yes" ]]; then
        [[ -f ${S}/ltmain.sh ]] && set -- "${S}";
    else
        set -- $(find "${S}" -name ltmain.sh -printf '%h ');
    fi;
    local d p;
    for d in "$@";
    do
        export ELT_APPLIED_PATCHES=;
        [[ -f ${d}/.elibtoolized ]] && continue;
        einfo "Running elibtoolize in: ${d#${WORKDIR}/}/";
        for p in ${elt_patches};
        do
            local ret=0;
            case ${p} in 
                portage)
                    if ! grep -qs 'We do not want portage' "${d}/ltmain.sh"; then
                        ELT_walk_patches "${d}/ltmain.sh" "${p}";
                        ret=$?;
                    fi
                ;;
                rem-int-dep)
                    ELT_walk_patches "${d}/ltmain.sh" "${p}" "${deptoremove}";
                    ret=$?
                ;;
                fix-relink)
                    if grep -qs 'inst_prefix_dir' "${d}/ltmain.sh"; then
                        ELT_walk_patches "${d}/ltmain.sh" "${p}";
                        ret=$?;
                    fi
                ;;
                max_cmd_len)
                    if grep -qs 'max_cmd_len' "${d}/ltmain.sh"; then
                        ELT_walk_patches "${d}/ltmain.sh" "${p}";
                        ret=$?;
                    fi
                ;;
                as-needed)
                    ELT_walk_patches "${d}/ltmain.sh" "${p}";
                    ret=$?
                ;;
                uclibc-conf)
                    if grep -qs 'Transform linux' "${d}/configure"; then
                        ELT_walk_patches "${d}/configure" "${p}";
                        ret=$?;
                    else
                        if [[ ! -e ${d}/configure ]] && grep -qs 'Transform linux' "${d}/../configure"; then
                            ELT_walk_patches "${d}/../configure" "${p}";
                            ret=$?;
                        fi;
                    fi
                ;;
                uclibc-ltconf)
                    if [[ -s ${d}/ltconfig ]]; then
                        ELT_walk_patches "${d}/ltconfig" "${p}";
                        ret=$?;
                    fi
                ;;
                fbsd-conf)
                    if grep -qs 'version_type=freebsd-' "${d}/configure"; then
                        ELT_walk_patches "${d}/configure" "${p}";
                        ret=$?;
                    else
                        if [[ ! -e ${d}/configure ]] && grep -qs 'version_type=freebsd-' "${d}/../configure"; then
                            ELT_walk_patches "${d}/../configure" "${p}";
                            ret=$?;
                        fi;
                    fi
                ;;
                fbsd-ltconf)
                    if [[ -s ${d}/ltconfig ]]; then
                        ELT_walk_patches "${d}/ltconfig" "${p}";
                        ret=$?;
                    fi
                ;;
                darwin-conf)
                    if grep -qs '&& echo \.so ||' "${d}/configure"; then
                        ELT_walk_patches "${d}/configure" "${p}";
                        ret=$?;
                    else
                        if [[ ! -e ${d}/configure ]] && grep -qs '&& echo \.so ||' "${d}/../configure"; then
                            ELT_walk_patches "${d}/../configure" "${p}";
                            ret=$?;
                        fi;
                    fi
                ;;
                darwin-ltconf)
                    if [[ -s ${d}/ltconfig ]]; then
                        ELT_walk_patches "${d}/ltconfig" "${p}";
                        ret=$?;
                    fi
                ;;
                darwin-ltmain)
                    if [[ -e ${d}/ltmain.sh ]] && ! grep -qs 'verstring="-compatibility_version' "${d}/ltmain.sh"; then
                        ELT_walk_patches "${d}/ltmain.sh" "${p}";
                        ret=$?;
                    fi
                ;;
                aixrtl | hpux-conf)
                    ret=1;
                    local subret=0;
                    while [[ $subret -eq 0 ]]; do
                        subret=1;
                        if [[ -e ${d}/configure ]]; then
                            ELT_walk_patches "${d}/configure" "${p}";
                            subret=$?;
                        else
                            if [[ ! -e ${d}/configure && -e ${d}/../configure ]]; then
                                ELT_walk_patches "${d}/../configure" "${p}";
                                subret=$?;
                            fi;
                        fi;
                        if [[ $subret -eq 0 ]]; then
                            ret=0;
                        fi;
                    done
                ;;
                mint-conf)
                    ret=1;
                    local subret=1;
                    if [[ -e ${d}/configure ]]; then
                        ELT_walk_patches "${d}/configure" "${p}";
                        subret=$?;
                    else
                        if [[ ! -e ${d}/configure && -e ${d}/../configure ]]; then
                            ELT_walk_patches "${d}/../configure" "${p}";
                            subret=$?;
                        fi;
                    fi;
                    if [[ $subret -eq 0 ]]; then
                        ret=0;
                    fi
                ;;
                install-sh)
                    ELT_walk_patches "${d}/install-sh" "${p}";
                    ret=$?
                ;;
                cross)
                    if tc-is-cross-compiler; then
                        ELT_walk_patches "${d}/ltmain.sh" "${p}";
                        ret=$?;
                    fi
                ;;
                *)
                    ELT_walk_patches "${d}/ltmain.sh" "${p}";
                    ret=$?
                ;;
            esac;
            if [[ ${ret} -ne 0 ]]; then
                case ${p} in 
                    relink)
                        local version=$(ELT_libtool_version "${d}/ltmain.sh");
                        if ! grep -qs 'inst_prefix_dir' "${d}/ltmain.sh" && [[ $(VER_to_int "${version}") -ge $(VER_to_int "1.4.0") ]]; then
                            ewarn "  Could not apply relink.patch!";
                        fi
                    ;;
                    portage)
                        if [[ ${do_portage} == "yes" ]]; then
                            if ! grep -qs 'We do not want portage' "${d}/ltmain.sh"; then
                                echo;
                                eerror "Portage patch requested, but failed to apply!";
                                eerror "Please file a bug report to add a proper patch.";
                                die "Portage patch requested, but failed to apply!";
                            fi;
                        else
                            if grep -qs 'We do not want portage' "${d}/ltmain.sh"; then
                                :;
                            else
                                local version=$(ELT_libtool_version "${d}"/ltmain.sh);
                                echo;
                                eerror "Portage patch failed to apply (ltmain.sh version ${version})!";
                                eerror "Please file a bug report to add a proper patch.";
                                die "Portage patch failed to apply!";
                            fi;
                            ELT_APPLIED_PATCHES="portage";
                        fi
                    ;;
                    uclibc-*)
                        [[ ${CHOST} == *-uclibc ]] && ewarn "  uClibc patch set '${p}' failed to apply!"
                    ;;
                    fbsd-*)
                        if [[ ${CHOST} == *-freebsd* ]]; then
                            if [[ -z $(grep 'Handle Gentoo/FreeBSD as it was Linux' 								"${d}/configure" "${d}/../configure" 2>/dev/null) ]]; then
                                eerror "  FreeBSD patch set '${p}' failed to apply!";
                                die "FreeBSD patch set '${p}' failed to apply!";
                            fi;
                        fi
                    ;;
                    darwin-*)
                        [[ ${CHOST} == *"-darwin"* ]] && ewarn "  Darwin patch set '${p}' failed to apply!"
                    ;;
                esac;
            fi;
        done;
        if [[ -z ${ELT_APPLIED_PATCHES} ]]; then
            if [[ ${do_portage} == "no" && ${do_reversedeps} == "no" && ${do_only_patches} == "no" && ${deptoremove} == "" ]]; then
                ewarn "Cannot apply any patches, please file a bug about this";
                die;
            fi;
        fi;
        rm -f "${d}/libtool";
         > "${d}/.elibtoolized";
    done
}
elog () 
{ 
    elog_base LOG "$*";
    [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo;
    echo -e "$@" | while read -r; do
        echo " $GOOD*$NORMAL $REPLY";
    done;
    LAST_E_CMD="elog";
    return 0
}
elog_base () 
{ 
    local messagetype;
    [ -z "${1}" -o -z "${T}" -o ! -d "${T}/logging" ] && return 1;
    case "${1}" in 
        INFO | WARN | ERROR | LOG | QA)
            messagetype="${1}";
            shift
        ;;
        *)
            vecho -e " ${BAD}*${NORMAL} Invalid use of internal function elog_base(), next message will not be logged";
            return 1
        ;;
    esac;
    echo -e "$@" | while read -r; do
        echo "$messagetype $REPLY" >> "${T}/logging/${EBUILD_PHASE:-other}";
    done;
    return 0
}
emktemp () 
{ 
    local exe="touch";
    [[ $1 == -d ]] && exe="mkdir" && shift;
    local topdir=$1;
    if [[ -z ${topdir} ]]; then
        [[ -z ${T} ]] && topdir="/tmp" || topdir=${T};
    fi;
    if ! type -P mktemp > /dev/null; then
        local tmp=/;
        while [[ -e ${tmp} ]]; do
            tmp=${topdir}/tmp.${RANDOM}.${RANDOM}.${RANDOM};
        done;
        ${exe} "${tmp}" || ${exe} -p "${tmp}";
        echo "${tmp}";
    else
        if [[ ${exe} == "touch" ]]; then
            TMPDIR="${topdir}" mktemp -t tmp.XXXXXXXXXX;
        else
            TMPDIR="${topdir}" mktemp -dt tmp.XXXXXXXXXX;
        fi;
    fi
}
enewgroup () 
{ 
    case ${EBUILD_PHASE} in 
        unpack | compile | test | install)
            eerror "'enewgroup()' called from '${EBUILD_PHASE}()' which is not a pkg_* function.";
            eerror "Package fails at QA and at life.  Please file a bug.";
            die "Bad package!  enewgroup is only for use in pkg_* functions!"
        ;;
    esac;
    local egroup="$1";
    shift;
    if [ -z "${egroup}" ]; then
        eerror "No group specified !";
        die "Cannot call enewgroup without a group";
    fi;
    if [[ -n $(egetent group "${egroup}") ]]; then
        return 0;
    fi;
    einfo "Adding group '${egroup}' to your system ...";
    local opts=;
    local egid="$1";
    shift;
    if [ ! -z "${egid}" ]; then
        if [ "${egid}" -gt 0 ]; then
            if [ -z "`egetent group ${egid}`" ]; then
                if [[ "${CHOST}" == *-darwin* ]]; then
                    opts="${opts} ${egid}";
                else
                    opts="${opts} -g ${egid}";
                fi;
            else
                egid="next available; requested gid taken";
            fi;
        else
            eerror "Groupid given but is not greater than 0 !";
            die "${egid} is not a valid GID";
        fi;
    else
        egid="next available";
    fi;
    einfo " - Groupid: ${egid}";
    local eextra="$@";
    opts="${opts} ${eextra}";
    local oldsandbox="${SANDBOX_ON}";
    export SANDBOX_ON="0";
    case ${CHOST} in 
        *-darwin*)
            if [ ! -z "${eextra}" ]; then
                einfo "Extra options are not supported on Darwin/OS X yet";
                einfo "Please report the ebuild along with the info below";
                einfo "eextra: ${eextra}";
                die "Required function missing";
            fi;
            case ${egid} in 
                *[!0-9]*)
                    for ((egid = 101; egid <= 999; egid++))
                    do
                        [[ -z $(egetent group ${egid}) ]] && break;
                    done
                ;;
            esac;
            dscl . create /groups/${egroup} gid ${egid};
            dscl . create /groups/${egroup} passwd '*'
        ;;
        *-freebsd* | *-dragonfly*)
            case ${egid} in 
                *[!0-9]*)
                    for ((egid = 101; egid <= 999; egid++))
                    do
                        [[ -z $(egetent group ${egid}) ]] && break;
                    done
                ;;
            esac;
            pw groupadd ${egroup} -g ${egid} || die "enewgroup failed"
        ;;
        *-netbsd*)
            case ${egid} in 
                *[!0-9]*)
                    for ((egid = 101; egid <= 999; egid++))
                    do
                        [[ -z $(egetent group ${egid}) ]] && break;
                    done
                ;;
            esac;
            groupadd -g ${egid} ${egroup} || die "enewgroup failed"
        ;;
        *)
            groupadd -r ${opts} ${egroup} || die "enewgroup failed"
        ;;
    esac;
    export SANDBOX_ON="${oldsandbox}"
}
enewuser () 
{ 
    case ${EBUILD_PHASE} in 
        unpack | compile | test | install)
            eerror "'enewuser()' called from '${EBUILD_PHASE}()' which is not a pkg_* function.";
            eerror "Package fails at QA and at life.  Please file a bug.";
            die "Bad package!  enewuser is only for use in pkg_* functions!"
        ;;
    esac;
    local euser=$1;
    shift;
    if [[ -z ${euser} ]]; then
        eerror "No username specified !";
        die "Cannot call enewuser without a username";
    fi;
    if [[ -n $(egetent passwd "${euser}") ]]; then
        return 0;
    fi;
    einfo "Adding user '${euser}' to your system ...";
    local opts=;
    local euid=$1;
    shift;
    if [[ -n ${euid} && ${euid} != -1 ]]; then
        if [[ ${euid} -gt 0 ]]; then
            if [[ -n $(egetent passwd ${euid}) ]]; then
                euid="next";
            fi;
        else
            eerror "Userid given but is not greater than 0 !";
            die "${euid} is not a valid UID";
        fi;
    else
        euid="next";
    fi;
    if [[ ${euid} == "next" ]]; then
        for ((euid = 101; euid <= 999; euid++))
        do
            [[ -z $(egetent passwd ${euid}) ]] && break;
        done;
    fi;
    opts="${opts} -u ${euid}";
    einfo " - Userid: ${euid}";
    local eshell=$1;
    shift;
    if [[ ! -z ${eshell} ]] && [[ ${eshell} != "-1" ]]; then
        if [[ ! -e ${ROOT}${eshell} ]]; then
            eerror "A shell was specified but it does not exist !";
            die "${eshell} does not exist in ${ROOT}";
        fi;
        if [[ ${eshell} == */false || ${eshell} == */nologin ]]; then
            eerror "Do not specify ${eshell} yourself, use -1";
            die "Pass '-1' as the shell parameter";
        fi;
    else
        for shell in /sbin/nologin /usr/sbin/nologin /bin/false /usr/bin/false /dev/null;
        do
            [[ -x ${ROOT}${shell} ]] && break;
        done;
        if [[ ${shell} == "/dev/null" ]]; then
            eerror "Unable to identify the shell to use, proceeding with userland default.";
            case ${USERLAND} in 
                GNU)
                    shell="/bin/false"
                ;;
                BSD)
                    shell="/sbin/nologin"
                ;;
                Darwin)
                    shell="/usr/sbin/nologin"
                ;;
                *)
                    die "Unable to identify the default shell for userland ${USERLAND}"
                ;;
            esac;
        fi;
        eshell=${shell};
    fi;
    einfo " - Shell: ${eshell}";
    opts="${opts} -s ${eshell}";
    local ehome=$1;
    shift;
    if [[ -z ${ehome} ]] || [[ ${ehome} == "-1" ]]; then
        ehome="/dev/null";
    fi;
    einfo " - Home: ${ehome}";
    opts="${opts} -d ${ehome}";
    local egroups=$1;
    shift;
    if [[ ! -z ${egroups} ]]; then
        local oldifs=${IFS};
        local defgroup="" exgroups="";
        export IFS=",";
        for g in ${egroups};
        do
            export IFS=${oldifs};
            if [[ -z $(egetent group "${g}") ]]; then
                eerror "You must add group ${g} to the system first";
                die "${g} is not a valid GID";
            fi;
            if [[ -z ${defgroup} ]]; then
                defgroup=${g};
            else
                exgroups="${exgroups},${g}";
            fi;
            export IFS=",";
        done;
        export IFS=${oldifs};
        opts="${opts} -g ${defgroup}";
        if [[ ! -z ${exgroups} ]]; then
            opts="${opts} -G ${exgroups:1}";
        fi;
    else
        egroups="(none)";
    fi;
    einfo " - Groups: ${egroups}";
    local oldsandbox=${SANDBOX_ON};
    export SANDBOX_ON="0";
    case ${CHOST} in 
        *-darwin*)
            if [[ -z $@ ]]; then
                dscl . create /users/${euser} uid ${euid};
                dscl . create /users/${euser} shell ${eshell};
                dscl . create /users/${euser} home ${ehome};
                dscl . create /users/${euser} realname "added by portage for ${PN}";
                local oldifs=${IFS};
                export IFS=",";
                for g in ${egroups};
                do
                    dscl . merge /groups/${g} users ${euser};
                done;
                export IFS=${oldifs};
            else
                einfo "Extra options are not supported on Darwin yet";
                einfo "Please report the ebuild along with the info below";
                einfo "eextra: $@";
                die "Required function missing";
            fi
        ;;
        *-freebsd* | *-dragonfly*)
            if [[ -z $@ ]]; then
                pw useradd ${euser} ${opts} -c "added by portage for ${PN}" die "enewuser failed";
            else
                einfo " - Extra: $@";
                pw useradd ${euser} ${opts} "$@" || die "enewuser failed";
            fi
        ;;
        *-netbsd*)
            if [[ -z $@ ]]; then
                useradd ${opts} ${euser} || die "enewuser failed";
            else
                einfo " - Extra: $@";
                useradd ${opts} ${euser} "$@" || die "enewuser failed";
            fi
        ;;
        *-openbsd*)
            if [[ -z $@ ]]; then
                useradd -u ${euid} -s ${eshell} -d ${ehome} -c "Added by portage for ${PN}" -g ${egroups} ${euser} || die "enewuser failed";
            else
                einfo " - Extra: $@";
                useradd -u ${euid} -s ${eshell} -d ${ehome} -c "Added by portage for ${PN}" -g ${egroups} ${euser} "$@" || die "enewuser failed";
            fi
        ;;
        *)
            if [[ -z $@ ]]; then
                useradd -r ${opts} -c "added by portage for ${PN}" ${euser} || die "enewuser failed";
            else
                einfo " - Extra: $@";
                useradd -r ${opts} "$@" ${euser} || die "enewuser failed";
            fi
        ;;
    esac;
    if [[ ! -e ${ROOT}/${ehome} ]]; then
        einfo " - Creating ${ehome} in ${ROOT}";
        mkdir -p "${ROOT}/${ehome}";
        chown ${euser} "${ROOT}/${ehome}";
        chmod 755 "${ROOT}/${ehome}";
    fi;
    export SANDBOX_ON=${oldsandbox}
}
epatch () 
{ 
    function _epatch_draw_line () 
    { 
        [[ -z $1 ]] && set "$(printf "%65s" '')";
        echo "${1//?/=}"
    };
    unset P4CONFIG P4PORT P4USER;
    if [[ $# -gt 1 ]]; then
        local m;
        for m in "$@";
        do
            epatch "${m}";
        done;
        return 0;
    fi;
    local SINGLE_PATCH="no";
    [[ $# -eq 0 ]] && set -- "${EPATCH_SOURCE}";
    if [[ -f $1 ]]; then
        SINGLE_PATCH="yes";
        set -- "$1";
        local EPATCH_SUFFIX=$1;
    else
        if [[ -d $1 ]]; then
            set -- "$1"/*${EPATCH_SUFFIX:+."${EPATCH_SUFFIX}"};
        else
            [[ $# -ne 0 ]] && EPATCH_SOURCE=$1;
            echo;
            eerror "Cannot find \$EPATCH_SOURCE!  Value for \$EPATCH_SOURCE is:";
            eerror;
            eerror "  ${EPATCH_SOURCE}";
            eerror "  ( ${EPATCH_SOURCE##*/} )";
            echo;
            die "Cannot find \$EPATCH_SOURCE!";
        fi;
    fi;
    local PIPE_CMD;
    case ${EPATCH_SUFFIX##*\.} in 
        xz)
            PIPE_CMD="xz -dc"
        ;;
        lzma)
            PIPE_CMD="lzma -dc"
        ;;
        bz2)
            PIPE_CMD="bzip2 -dc"
        ;;
        gz | Z | z)
            PIPE_CMD="gzip -dc"
        ;;
        ZIP | zip)
            PIPE_CMD="unzip -p"
        ;;
        *)

        ;;
    esac;
    [[ ${SINGLE_PATCH} == "no" ]] && einfo "${EPATCH_MULTI_MSG}";
    local x;
    for x in "$@";
    do
        [[ ! -f ${x} ]] && continue;
        local patchname=${x##*/};
        local a=${patchname#*_};
        a=${a%%_*};
        if ! [[ ${SINGLE_PATCH} == "yes" || ${EPATCH_FORCE} == "yes" || ${a} == all || ${a} == ${ARCH} ]]; then
            continue;
        fi;
        if [[ -n ${EPATCH_EXCLUDE} ]]; then
            eshopts_push -o noglob;
            local ex;
            for ex in ${EPATCH_EXCLUDE};
            do
                if [[ ${patchname} == ${ex} ]]; then
                    eshopts_pop;
                    continue 2;
                fi;
            done;
            eshopts_pop;
        fi;
        if [[ ${SINGLE_PATCH} == "yes" ]]; then
            if [[ -n ${EPATCH_SINGLE_MSG} ]]; then
                einfo "${EPATCH_SINGLE_MSG}";
            else
                einfo "Applying ${patchname} ...";
            fi;
        else
            einfo "  ${patchname} ...";
        fi;
        local STDERR_TARGET="${T}/${patchname}.out";
        if [[ -e ${STDERR_TARGET} ]]; then
            STDERR_TARGET="${T}/${patchname}-$$.out";
        fi;
        printf "***** %s *****\n\n" "${patchname}" > "${STDERR_TARGET}";
        local count=0;
        local PATCH_TARGET;
        if [[ -n ${PIPE_CMD} ]]; then
            PATCH_TARGET="${T}/$$.patch";
            echo "PIPE_COMMAND:  ${PIPE_CMD} ${x} > ${PATCH_TARGET}" >> "${STDERR_TARGET}";
            if ! ( ${PIPE_CMD} "${x}" > "${PATCH_TARGET}" ) >> "${STDERR_TARGET}" 2>&1; then
                echo;
                eerror "Could not extract patch!";
                count=5;
                break;
            fi;
        else
            PATCH_TARGET=${x};
        fi;
        local abs_paths=$(egrep -n '^[-+]{3} /' "${PATCH_TARGET}" | awk '$2 != "/dev/null" { print }');
        if [[ -n ${abs_paths} ]]; then
            count=1;
            printf "NOTE: skipping -p0 due to absolute paths in patch:\n%s\n" "${abs_paths}" >> "${STDERR_TARGET}";
        fi;
        local rel_paths=$(egrep -n '^[-+]{3} [^	]*[.][.]/' "${PATCH_TARGET}");
        if [[ -n ${rel_paths} ]]; then
            eqawarn "QA Notice: Your patch uses relative paths '../'.";
            eqawarn " In the future this will cause a failure.";
            eqawarn "${rel_paths}";
        fi;
        while [[ ${count} -lt 5 ]]; do
            ( _epatch_draw_line "***** ${patchname} *****";
            echo;
            echo "PATCH COMMAND:  patch -p${count} ${EPATCH_OPTS} < '${PATCH_TARGET}'";
            echo;
            _epatch_draw_line "***** ${patchname} *****" ) >> "${STDERR_TARGET}";
            if ( patch -p${count} ${EPATCH_OPTS} --dry-run -f < "${PATCH_TARGET}" ) >> "${STDERR_TARGET}" 2>&1; then
                ( _epatch_draw_line "***** ${patchname} *****";
                echo;
                echo "ACTUALLY APPLYING ${patchname} ...";
                echo;
                _epatch_draw_line "***** ${patchname} *****";
                patch -p${count} ${EPATCH_OPTS} < "${PATCH_TARGET}" 2>&1 ) >> "${STDERR_TARGET}";
                if [ $? -ne 0 ]; then
                    echo;
                    eerror "A dry-run of patch command succeeded, but actually";
                    eerror "applying the patch failed!";
                    count=5;
                fi;
                break;
            fi;
            : $(( count++ ));
        done;
        if [[ -n ${PIPE_CMD} ]]; then
            rm -f "${PATCH_TARGET}";
        fi;
        if [[ ${count} -ge 5 ]]; then
            echo;
            eerror "Failed Patch: ${patchname} !";
            eerror " ( ${PATCH_TARGET} )";
            eerror;
            eerror "Include in your bugreport the contents of:";
            eerror;
            eerror "  ${STDERR_TARGET}";
            echo;
            die "Failed Patch: ${patchname}!";
        fi;
        rm -f "${STDERR_TARGET}";
        eend 0;
    done;
    [[ ${SINGLE_PATCH} == "no" ]] && einfo "Done with patching";
    :
}
epatch_user () 
{ 
    [[ $# -ne 0 ]] && die "epatch_user takes no options";
    local EPATCH_SOURCE check base=${PORTAGE_CONFIGROOT%/}/etc/portage/patches;
    for check in {${CATEGORY}/${PF},${CATEGORY}/${P},${CATEGORY}/${PN}};
    do
        EPATCH_SOURCE=${base}/${CTARGET}/${check};
        [[ -r ${EPATCH_SOURCE} ]] || EPATCH_SOURCE=${base}/${CHOST}/${check};
        [[ -r ${EPATCH_SOURCE} ]] || EPATCH_SOURCE=${base}/${check};
        if [[ -d ${EPATCH_SOURCE} ]]; then
            EPATCH_SOURCE=${EPATCH_SOURCE} EPATCH_SUFFIX="patch" EPATCH_FORCE="yes" EPATCH_MULTI_MSG="Applying user patches from ${EPATCH_SOURCE} ..." epatch;
            return 0;
        fi;
    done;
    return 1
}
epause () 
{ 
    ewarn "QA Notice: epause is not defined in EAPI=${EAPI}, please file a bug at http://bugs.gentoo.org"
}
epunt_cxx () 
{ 
    local dir=$1;
    [[ -z ${dir} ]] && dir=${S};
    ebegin "Removing useless C++ checks";
    local f;
    find "${dir}" -name configure | while read f; do
        patch --no-backup-if-mismatch -p0 "${f}" "${PORTDIR}/eclass/ELT-patches/nocxx/nocxx.patch" > /dev/null;
    done;
    eend 0
}
eqawarn () 
{ 
    elog_base QA "$*";
    [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo;
    echo -e "$@" | while read -r; do
        vecho " $WARN*$NORMAL $REPLY" 1>&2;
    done;
    LAST_E_CMD="eqawarn";
    return 0
}
eshopts_pop () 
{ 
    [[ $# -ne 0 ]] && die "eshopts_pop takes no arguments";
    local i=$(( ${#__ESHOPTS_SAVE__[@]} - 1 ));
    [[ ${i} -eq -1 ]] && die "eshopts_{push,pop}: unbalanced pair";
    local s=${__ESHOPTS_SAVE__[$i]};
    unset __ESHOPTS_SAVE__[$i];
    if [[ ${s} == "shopt -"* ]]; then
        eval "${s}" || die "eshopts_pop: sanity: invalid shopt options: ${s}";
    else
        set +$- || die "eshopts_pop: sanity: invalid shell settings: $-";
        set -${s} || die "eshopts_pop: sanity: unable to restore saved shell settings: ${s}";
    fi
}
eshopts_push () 
{ 
    local i=${#__ESHOPTS_SAVE__[@]};
    if [[ $1 == -[su] ]]; then
        __ESHOPTS_SAVE__[$i]=$(shopt -p);
        [[ $# -eq 0 ]] && return 0;
        shopt "$@" || die "eshopts_push: bad options to shopt: $*";
    else
        __ESHOPTS_SAVE__[$i]=$-;
        [[ $# -eq 0 ]] && return 0;
        set "$@" || die "eshopts_push: bad options to set: $*";
    fi
}
esvn_clean () 
{ 
    [[ -z $* ]] && set -- .;
    find "$@" -type d -name '.svn' -prune -print0 | xargs -0 rm -rf
}
esyslog () 
{ 
    return 0
}
ewarn () 
{ 
    elog_base WARN "$*";
    [[ ${RC_ENDCOL} != "yes" && ${LAST_E_CMD} == "ebegin" ]] && echo;
    echo -e "$@" | while read -r; do
        echo " $WARN*$NORMAL $RC_INDENTATION$REPLY" 1>&2;
    done;
    LAST_E_CMD="ewarn";
    return 0
}
exeinto () 
{ 
    if [ "$1" == "/" ]; then
        export _E_EXEDESTTREE_="";
    else
        export _E_EXEDESTTREE_="$1";
        if [ ! -d "${D}${_E_EXEDESTTREE_}" ]; then
            install -d "${D}${_E_EXEDESTTREE_}";
            local ret=$?;
            if [[ $ret -ne 0 ]]; then
                helpers_die "${FUNCNAME[0]} failed";
                return $ret;
            fi;
        fi;
    fi
}
exeopts () 
{ 
    export EXEOPTIONS="$@";
    hasq -s ${EXEOPTIONS} && die "Never call exeopts() with -s"
}
fdo-mime_desktop_database_update () 
{ 
    if [ -x "/usr/bin/update-desktop-database" ]; then
        einfo "Updating desktop mime database ...";
        "/usr/bin/update-desktop-database" -q "${ROOT}/usr/share/applications";
    fi
}
fdo-mime_mime_database_update () 
{ 
    if [ -x "/usr/bin/update-mime-database" ]; then
        einfo "Updating shared mime info database ...";
        "/usr/bin/update-mime-database" "${ROOT}/usr/share/mime";
    fi
}
filter_readonly_variables () 
{ 
    local x filtered_vars;
    local readonly_bash_vars="BASHOPTS BASHPID DIRSTACK EUID
		FUNCNAME GROUPS PIPESTATUS PPID SHELLOPTS UID";
    local bash_misc_vars="BASH BASH_.* COMP_WORDBREAKS HISTCMD
		HISTFILE HOSTNAME HOSTTYPE IFS LINENO MACHTYPE OLDPWD
		OPTERR OPTIND OSTYPE POSIXLY_CORRECT PS4 PWD RANDOM
		SECONDS SHELL SHLVL";
    local filtered_sandbox_vars="SANDBOX_ACTIVE SANDBOX_BASHRC
		SANDBOX_DEBUG_LOG SANDBOX_DISABLED SANDBOX_LIB
		SANDBOX_LOG SANDBOX_ON";
    local misc_garbage_vars="_portage_filter_opts";
    filtered_vars="$readonly_bash_vars $bash_misc_vars
		$PORTAGE_READONLY_VARS $misc_garbage_vars";
    case "${EAPI:-0}" in 
        0 | 1 | 2)

        ;;
        *)
            filtered_vars+=" ED EPREFIX EROOT"
        ;;
    esac;
    if hasq --filter-sandbox $*; then
        filtered_vars="${filtered_vars} SANDBOX_.*";
    else
        filtered_vars="${filtered_vars} ${filtered_sandbox_vars}";
    fi;
    if hasq --filter-features $*; then
        filtered_vars="${filtered_vars} FEATURES PORTAGE_FEATURES";
    fi;
    if hasq --filter-path $*; then
        filtered_vars+=" PATH";
    fi;
    if hasq --filter-locale $*; then
        filtered_vars+=" LANG LC_ALL LC_COLLATE
			LC_CTYPE LC_MESSAGES LC_MONETARY
			LC_NUMERIC LC_PAPER LC_TIME";
    fi;
    if ! hasq --allow-extra-vars $*; then
        filtered_vars="
			${filtered_vars}
			${PORTAGE_SAVED_READONLY_VARS}
			${PORTAGE_MUTABLE_FILTERED_VARS}
		";
    fi;
    "${PORTAGE_PYTHON:-/usr/bin/python}" "${PORTAGE_BIN_PATH}"/filter-bash-environment.py "${filtered_vars}" || die "filter-bash-environment.py failed"
}
find_unpackable_file () 
{ 
    local src=$1;
    if [[ -z ${src} ]]; then
        src=${DISTDIR}/${A};
    else
        if [[ -e ${DISTDIR}/${src} ]]; then
            src=${DISTDIR}/${src};
        else
            if [[ -e ${PWD}/${src} ]]; then
                src=${PWD}/${src};
            else
                if [[ -e ${src} ]]; then
                    src=${src};
                fi;
            fi;
        fi;
    fi;
    [[ ! -e ${src} ]] && return 1;
    echo "${src}"
}
gcc-fullversion () 
{ 
    _gcc_fullversion '$1.$2.$3' "$@"
}
gcc-major-version () 
{ 
    _gcc_fullversion '$1' "$@"
}
gcc-micro-version () 
{ 
    _gcc_fullversion '$3' "$@"
}
gcc-minor-version () 
{ 
    _gcc_fullversion '$2' "$@"
}
gcc-specs-directive () 
{ 
    local directive subdname subdirective;
    directive="$(_gcc-specs-directive_raw $1)";
    while [[ ${directive} == *%\(*\)* ]]; do
        subdname=${directive/*%\(};
        subdname=${subdname/\)*};
        subdirective="$(_gcc-specs-directive_raw ${subdname})";
        directive="${directive//\%(${subdname})/${subdirective}}";
    done;
    echo "${directive}";
    return 0
}
gcc-specs-nostrict () 
{ 
    local directive;
    directive=$(gcc-specs-directive cc1);
    return $([[ "${directive/\{!fstrict-overflow:}" != "${directive}" ]])
}
gcc-specs-now () 
{ 
    local directive;
    directive=$(gcc-specs-directive link_command);
    return $([[ "${directive/\{!nonow:}" != "${directive}" ]])
}
gcc-specs-pie () 
{ 
    local directive;
    directive=$(gcc-specs-directive cc1);
    return $([[ "${directive/\{!nopie:}" != "${directive}" ]])
}
gcc-specs-relro () 
{ 
    local directive;
    directive=$(gcc-specs-directive link_command);
    return $([[ "${directive/\{!norelro:}" != "${directive}" ]])
}
gcc-specs-ssp () 
{ 
    local directive;
    directive=$(gcc-specs-directive cc1);
    return $([[ "${directive/\{!fno-stack-protector:}" != "${directive}" ]])
}
gcc-specs-ssp-to-all () 
{ 
    local directive;
    directive=$(gcc-specs-directive cc1);
    return $([[ "${directive/\{!fno-stack-protector-all:}" != "${directive}" ]])
}
gcc-version () 
{ 
    _gcc_fullversion '$1.$2' "$@"
}
gen_usr_ldscript () 
{ 
    local lib libdir=$(get_libdir) output_format="" auto=false suffix=$(get_libname);
    [[ -z ${ED+set} ]] && local ED=${D%/}${EPREFIX}/;
    tc-is-static-only && return;
    dodir /usr/${libdir};
    if [[ $1 == "-a" ]]; then
        auto=true;
        shift;
        dodir /${libdir};
    fi;
    output_format=$($(tc-getCC) ${CFLAGS} ${LDFLAGS} -Wl,--verbose 2>&1 | sed -n 's/^OUTPUT_FORMAT("\([^"]*\)",.*/\1/p');
    [[ -n ${output_format} ]] && output_format="OUTPUT_FORMAT ( ${output_format} )";
    for lib in "$@";
    do
        local tlib;
        if ${auto}; then
            lib="lib${lib}${suffix}";
        else
            [[ -r ${ED}/${libdir}/${lib} ]] || continue;
        fi;
        case ${CTARGET:-${CHOST}} in 
            *-darwin*)
                if ${auto}; then
                    tlib=$(scanmacho -qF'%S#F' "${ED}"/usr/${libdir}/${lib});
                else
                    tlib=$(scanmacho -qF'%S#F' "${ED}"/${libdir}/${lib});
                fi;
                [[ -z ${tlib} ]] && die "unable to read install_name from ${lib}";
                tlib=${tlib##*/};
                if ${auto}; then
                    mv "${ED}"/usr/${libdir}/${lib%${suffix}}.*${suffix#.} "${ED}"/${libdir}/ || die;
                    if [[ ${tlib} != ${lib%${suffix}}.*${suffix#.} ]]; then
                        mv "${ED}"/usr/${libdir}/${tlib%${suffix}}.*${suffix#.} "${ED}"/${libdir}/ || die;
                    fi;
                    rm -f "${ED}"/${libdir}/${lib};
                fi;
                if [[ ! -w "${ED}/${libdir}/${tlib}" ]]; then
                    chmod u+w "${ED}${libdir}/${tlib}";
                    local nowrite=yes;
                fi;
                install_name_tool -id "${EPREFIX}"/${libdir}/${tlib} "${ED}"/${libdir}/${tlib} || die "install_name_tool failed";
                [[ -n ${nowrite} ]] && chmod u-w "${ED}${libdir}/${tlib}";
                pushd "${ED}/usr/${libdir}" > /dev/null;
                ln -snf "../../${libdir}/${tlib}" "${lib}";
                popd > /dev/null
            ;;
            *-aix* | *-irix* | *64*-hpux* | *-interix* | *-winnt*)
                if ${auto}; then
                    mv "${ED}"/usr/${libdir}/${lib}* "${ED}"/${libdir}/ || die;
                    tlib=$(readlink "${ED}"/${libdir}/${lib});
                    tlib=${tlib##*/};
                    if [[ -z ${tlib} ]]; then
                        tlib=${lib};
                    else
                        rm -f "${ED}"/${libdir}/${lib};
                    fi;
                else
                    tlib=${lib};
                fi;
                pushd "${ED}/usr/${libdir}" > /dev/null;
                ln -snf "../../${libdir}/${tlib}" "${lib}";
                popd > /dev/null
            ;;
            hppa*-hpux*)
                if ${auto}; then
                    tlib=$(chatr "${ED}"/usr/${libdir}/${lib} | sed -n '/internal name:/{n;s/^ *//;p;q}');
                    [[ -z ${tlib} ]] && tlib=${lib};
                    tlib=${tlib##*/};
                    mv "${ED}"/usr/${libdir}/${lib}* "${ED}"/${libdir}/ || die;
                    if [[ ${tlib} != ${lib}* ]]; then
                        mv "${ED}"/usr/${libdir}/${tlib}* "${ED}"/${libdir}/ || die;
                    fi;
                    [[ ${tlib} != ${lib} ]] && rm -f "${ED}"/${libdir}/${lib};
                else
                    tlib=$(chatr "${ED}"/${libdir}/${lib} | sed -n '/internal name:/{n;s/^ *//;p;q}');
                    [[ -z ${tlib} ]] && tlib=${lib};
                    tlib=${tlib##*/};
                fi;
                pushd "${ED}"/usr/${libdir} > /dev/null;
                ln -snf "../../${libdir}/${tlib}" "${lib}";
                [[ ${tlib} != ${lib} ]] && ln -snf "../../${libdir}/${tlib}" "${tlib}";
                popd > /dev/null
            ;;
            *)
                if ${auto}; then
                    tlib=$(scanelf -qF'%S#F' "${ED}"/usr/${libdir}/${lib});
                    [[ -z ${tlib} ]] && die "unable to read SONAME from ${lib}";
                    mv "${ED}"/usr/${libdir}/${lib}* "${ED}"/${libdir}/ || die;
                    if [[ ${tlib} != ${lib}* ]]; then
                        mv "${ED}"/usr/${libdir}/${tlib}* "${ED}"/${libdir}/ || die;
                    fi;
                    rm -f "${ED}"/${libdir}/${lib};
                else
                    tlib=${lib};
                fi;
                cat > "${ED}/usr/${libdir}/${lib}"  <<-END_LDSCRIPT
/* GNU ld script
   Since Gentoo has critical dynamic libraries in /lib, and the static versions
   in /usr/lib, we need to have a "fake" dynamic lib in /usr/lib, otherwise we
   run into linking problems.  This "fake" dynamic lib is a linker script that
   redirects the linker to the real lib.  And yes, this works in the cross-
   compiling scenario as the sysroot-ed linker will prepend the real path.

   See bug http://bugs.gentoo.org/4411 for more info.
 */
${output_format}
GROUP ( ${EPREFIX}/${libdir}/${tlib} )
END_LDSCRIPT

            ;;
        esac
        fperms a+x "/usr/${libdir}/${lib}" || die "could not change perms on ${lib}";
    done
}
get_KV () 
{ 
    [[ -z ${_RC_GET_KV_CACHE} ]] && _RC_GET_KV_CACHE=$(uname -r);
    echo $(KV_to_int "${_RC_GET_KV_CACHE}");
    return $?
}
get_abi_ASFLAGS () 
{ 
    get_abi_var ASFLAGS "$@"
}
get_abi_CDEFINE () 
{ 
    get_abi_var CDEFINE "$@"
}
get_abi_CFLAGS () 
{ 
    get_abi_var CFLAGS "$@"
}
get_abi_CHOST () 
{ 
    get_abi_var CHOST "$@"
}
get_abi_CTARGET () 
{ 
    get_abi_var CTARGET "$@"
}
get_abi_FAKE_TARGETS () 
{ 
    get_abi_var FAKE_TARGETS "$@"
}
get_abi_LDFLAGS () 
{ 
    get_abi_var LDFLAGS "$@"
}
get_abi_LIBDIR () 
{ 
    get_abi_var LIBDIR "$@"
}
get_abi_var () 
{ 
    local flag=$1;
    local abi;
    if [ $# -gt 1 ]; then
        abi=${2};
    else
        if [ -n "${ABI}" ]; then
            abi=${ABI};
        else
            if [ -n "${DEFAULT_ABI}" ]; then
                abi=${DEFAULT_ABI};
            else
                abi="default";
            fi;
        fi;
    fi;
    local var="${flag}_${abi}";
    echo ${!var}
}
get_all_abis () 
{ 
    local order="";
    if [[ -z ${MULTILIB_ABIS} ]]; then
        echo "default";
        return 0;
    fi;
    for x in ${MULTILIB_ABIS};
    do
        if [[ ${x} != ${DEFAULT_ABI} ]]; then
            order="${order:+${order} }${x}";
        fi;
    done;
    order="${order:+${order} }${DEFAULT_ABI}";
    echo ${order};
    return 0
}
get_all_libdirs () 
{ 
    local libdirs="lib";
    local abi;
    local dir;
    for abi in ${MULTILIB_ABIS};
    do
        [ "$(get_abi_LIBDIR ${abi})" != "lib" ] && libdirs="${libdirs} $(get_abi_LIBDIR ${abi})";
    done;
    echo "${libdirs}"
}
get_bmake () 
{ 
    if [[ ${USERLAND} == *BSD ]]; then
        echo make;
    else
        if [[ ${USERLAND} == "Darwin" ]]; then
            echo bsdmake;
        else
            echo pmake;
        fi;
    fi
}
get_install_abis () 
{ 
    local order="";
    if [[ -z ${MULTILIB_ABIS} ]]; then
        echo "default";
        return 0;
    fi;
    if [[ ${EMULTILIB_PKG} == "true" ]]; then
        for x in ${MULTILIB_ABIS};
        do
            if [[ ${x} != "${DEFAULT_ABI}" ]]; then
                hasq ${x} ${ABI_DENY} || ordera="${ordera} ${x}";
            fi;
        done;
        hasq ${DEFAULT_ABI} ${ABI_DENY} || order="${ordera} ${DEFAULT_ABI}";
        if [[ -n ${ABI_ALLOW} ]]; then
            local ordera="";
            for x in ${order};
            do
                if hasq ${x} ${ABI_ALLOW}; then
                    ordera="${ordera} ${x}";
                fi;
            done;
            order=${ordera};
        fi;
    else
        order=${DEFAULT_ABI};
    fi;
    if [[ -z ${order} ]]; then
        die "The ABI list is empty.  Are you using a proper multilib profile?  Perhaps your USE flags or MULTILIB_ABIS are too restrictive for this package.";
    fi;
    echo ${order};
    return 0
}
get_libdir () 
{ 
    local CONF_LIBDIR;
    if [ -n "${CONF_LIBDIR_OVERRIDE}" ]; then
        echo ${CONF_LIBDIR_OVERRIDE};
    else
        get_abi_LIBDIR;
    fi
}
get_libdir_override () 
{ 
    if has_multilib_profile; then
        eerror "get_libdir_override called, but it shouldn't be needed with the new multilib approach.  Please file a bug at http://bugs.gentoo.org and assign it to [e-mail]";
        exit 1;
    fi;
    CONF_LIBDIR="$1";
    CONF_LIBDIR_OVERRIDE="$1";
    LIBDIR_default="$1"
}
get_libname () 
{ 
    local libname;
    local ver=$1;
    case ${CHOST} in 
        *-cygwin | mingw* | *-mingw*)
            libname="dll"
        ;;
        *-darwin*)
            libname="dylib"
        ;;
        *-mint*)
            libname="irrelevant"
        ;;
        hppa*-hpux*)
            libname="sl"
        ;;
        *)
            libname="so"
        ;;
    esac;
    if [[ -z $* ]]; then
        echo ".${libname}";
    else
        for ver in "$@";
        do
            case ${CHOST} in 
                *-darwin*)
                    echo ".${ver}.${libname}"
                ;;
                *-mint*)
                    echo ".${libname}"
                ;;
                *)
                    echo ".${libname}.${ver}"
                ;;
            esac;
        done;
    fi
}
get_ml_incdir () 
{ 
    local dir=/usr/include;
    if [[ $# -gt 0 ]]; then
        incdir=$1;
        shift;
    fi;
    if [[ -z "${MULTILIB_ABIS}" ]]; then
        echo ${incdir};
        return 0;
    fi;
    local abi=${ABI-${DEFAULT_ABI}};
    if [[ $# -gt 0 ]]; then
        abi=$1;
        shift;
    fi;
    if [[ -d "${dir}/gentoo-multilib/${abi}" ]]; then
        echo ${dir}/gentoo-multilib/${abi};
    else
        echo ${dir};
    fi
}
get_modname () 
{ 
    local modname;
    local ver=$1;
    case ${CHOST} in 
        *-darwin*)
            modname="bundle"
        ;;
        *)
            modname="so"
        ;;
    esac;
    echo ".${modname}"
}
get_mounts () 
{ 
    local point= node= fs= opts= foo=;
    if [[ $(uname -s) == "Linux" ]]; then
        while read node point fs opts foo; do
            echo "${point} ${node} ${fs} ${opts}";
        done < /proc/mounts;
        return;
    fi;
    local IFS='	';
    LC_ALL=C mount -p | while read node point fs foo; do
        opts=${fs#* };
        fs=${fs%% *};
        echo "${point// /\040} ${node// /\040} ${fs%% *} ${opts// /\040}";
    done
}
get_multilibdir () 
{ 
    if has_multilib_profile; then
        eerror "get_multilibdir called, but it shouldn't be needed with the new multilib approach.  Please file a bug at http://bugs.gentoo.org and assign it to [e-mail]";
        exit 1;
    fi;
    echo ${CONF_MULTILIBDIR:=lib32}
}
gnome2_gconf_install () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && EROOT="${ROOT}";
    local updater="${EROOT}${GCONFTOOL_BIN}";
    if [[ ! -x "${updater}" ]]; then
        debug-print "${updater} is not executable";
        return;
    fi;
    if [[ -z "${GNOME2_ECLASS_SCHEMAS}" ]]; then
        debug-print "No GNOME 2 GConf schemas found";
        return;
    fi;
    unset GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL;
    export GCONF_CONFIG_SOURCE="$("${updater}" --get-default-source | sed "s;:/;:${ROOT};")";
    einfo "Installing GNOME 2 GConf schemas";
    local F;
    for F in ${GNOME2_ECLASS_SCHEMAS};
    do
        if [[ -e "${EROOT}${F}" ]]; then
            debug-print "Installing schema: ${F}";
            "${updater}" --makefile-install-rule "${EROOT}${F}" > /dev/null;
        fi;
    done;
    pids=$(pgrep -x gconfd-2);
    if [[ $? == 0 ]]; then
        ebegin "Reloading GConf schemas";
        kill -HUP ${pids};
        eend $?;
    fi
}
gnome2_gconf_savelist () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && ED="${D}";
    pushd "${ED}" &>/dev/null;
    export GNOME2_ECLASS_SCHEMAS=$(find 'etc/gconf/schemas/' -name '*.schemas' 2> /dev/null);
    popd &>/dev/null
}
gnome2_gconf_uninstall () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && EROOT="${ROOT}";
    local updater="${EROOT}${GCONFTOOL_BIN}";
    if [[ ! -x "${updater}" ]]; then
        debug-print "${updater} is not executable";
        return;
    fi;
    if [[ -z "${GNOME2_ECLASS_SCHEMAS}" ]]; then
        debug-print "No GNOME 2 GConf schemas found";
        return;
    fi;
    unset GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL;
    export GCONF_CONFIG_SOURCE="$("${updater}" --get-default-source | sed "s;:/;:${ROOT};")";
    einfo "Uninstalling GNOME 2 GConf schemas";
    local F;
    for F in ${GNOME2_ECLASS_SCHEMAS};
    do
        if [[ -e "${EROOT}${F}" ]]; then
            debug-print "Uninstalling gconf schema: ${F}";
            "${updater}" --makefile-uninstall-rule "${EROOT}${F}" > /dev/null;
        fi;
    done;
    pids=$(pgrep -x gconfd-2);
    if [[ $? == 0 ]]; then
        ebegin "Reloading GConf schemas";
        kill -HUP ${pids};
        eend $?;
    fi
}
gnome2_icon_cache_update () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && EROOT="${ROOT}";
    local updater="${EROOT}${GTK_UPDATE_ICON_CACHE}";
    if [[ ! -x "${updater}" ]]; then
        debug-print "${updater} is not executable";
        return;
    fi;
    if [[ -z "${GNOME2_ECLASS_ICONS}" ]]; then
        debug-print "No icon cache to update";
        return;
    fi;
    ebegin "Updating icons cache";
    local retval=0;
    local fails=();
    for dir in ${GNOME2_ECLASS_ICONS};
    do
        if [[ -f "${EROOT}${dir}/index.theme" ]]; then
            local rv=0;
            "${updater}" -qf "${EROOT}${dir}";
            rv=$?;
            if [[ ! $rv -eq 0 ]]; then
                debug-print "Updating cache failed on ${EROOT}${dir}";
                fails[$(( ${#fails[@]} + 1 ))]="${EROOT}${dir}";
                retval=2;
            fi;
        fi;
    done;
    eend ${retval};
    for f in "${fails[@]}";
    do
        eerror "Failed to update cache with icon $f";
    done
}
gnome2_icon_savelist () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && ED="${D}";
    pushd "${ED}" &>/dev/null;
    export GNOME2_ECLASS_ICONS=$(find 'usr/share/icons' -maxdepth 1 -mindepth 1 -type d 2> /dev/null);
    popd &>/dev/null
}
gnome2_omf_fix () 
{ 
    local omf_makefiles filename;
    omf_makefiles="$@";
    if [[ -f ${S}/omf.make ]]; then
        omf_makefiles="${omf_makefiles} ${S}/omf.make";
    fi;
    for filename in $(find ./ -name "Makefile.in" -o -name "Makefile.am" |sort);
    do
        omf_makefiles="${omf_makefiles} ${filename}";
    done;
    ebegin "Fixing OMF Makefiles";
    local retval=0;
    local fails=();
    for omf in ${omf_makefiles};
    do
        local rv=0;
        sed -i -e 's:scrollkeeper-update:true:' "${omf}";
        retval=$?;
        if [[ ! $rv -eq 0 ]]; then
            debug-print "updating of ${omf} failed";
            fails[$(( ${#fails[@]} + 1 ))]=$omf;
            retval=2;
        fi;
    done;
    eend $retval;
    for f in "${fails[@]}";
    do
        eerror "Failed to update OMF Makefile $f";
    done
}
gnome2_pkg_postinst () 
{ 
    gnome2_gconf_install;
    fdo-mime_desktop_database_update;
    fdo-mime_mime_database_update;
    gnome2_icon_cache_update;
    gnome2_schemas_update;
    if [[ "${SCROLLKEEPER_UPDATE}" = "1" ]]; then
        gnome2_scrollkeeper_update;
    fi
}
gnome2_pkg_postrm () 
{ 
    fdo-mime_desktop_database_update;
    fdo-mime_mime_database_update;
    gnome2_icon_cache_update;
    gnome2_schemas_update --uninstall;
    if [[ "${SCROLLKEEPER_UPDATE}" = "1" ]]; then
        gnome2_scrollkeeper_update;
    fi
}
gnome2_pkg_preinst () 
{ 
    gnome2_gconf_savelist;
    gnome2_icon_savelist;
    gnome2_schemas_savelist
}
gnome2_schemas_savelist () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && ED="${D}";
    pushd "${ED}" &>/dev/null;
    export GNOME2_ECLASS_GLIB_SCHEMAS=$(find 'usr/share/glib-2.0/schemas' -name '*.gschema.xml' 2>/dev/null);
    popd &>/dev/null
}
gnome2_schemas_update () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && EROOT="${ROOT}";
    local updater="${EROOT}${GLIB_COMPILE_SCHEMAS}";
    if [[ ! -x ${updater} ]]; then
        debug-print "${updater} is not executable";
        return;
    fi;
    if [[ -z ${GNOME2_ECLASS_GLIB_SCHEMAS} ]]; then
        debug-print "No GSettings schemas to update";
        return;
    fi;
    ebegin "Updating GSettings schemas";
    ${updater} --allow-any-name "$@" "${EROOT%/}/usr/share/glib-2.0/schemas" &>/dev/null;
    eend $?
}
gnome2_scrollkeeper_update () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && EROOT="${ROOT}";
    if [[ -x "${EROOT}${SCROLLKEEPER_UPDATE_BIN}" ]]; then
        einfo "Updating scrollkeeper database ...";
        "${EROOT}${SCROLLKEEPER_UPDATE_BIN}" -q -p "${EROOT}${SCROLLKEEPER_DIR}";
    fi
}
gnome2_src_compile () 
{ 
    has ${EAPI:-0} 0 1 && gnome2_src_configure "$@";
    emake || die "compile failure"
}
gnome2_src_configure () 
{ 
    if [[ ${GCONF_DEBUG} != 'no' ]]; then
        if use debug; then
            G2CONF="${G2CONF} --enable-debug=yes";
        fi;
    fi;
    if hasq doc ${IUSE}; then
        G2CONF="${G2CONF} $(use_enable doc gtk-doc)";
    fi;
    addwrite "/root/.gnome2";
    GST_REGISTRY="${S}/registry.xml" econf "$@" ${G2CONF} || die "configure failed"
}
gnome2_src_install () 
{ 
    has ${EAPI:-0} 0 1 2 && ! use prefix && ED="${D}";
    local sk_tmp_dir="/var/lib/scrollkeeper";
    dodir "${sk_tmp_dir}" || die "dodir failed";
    export GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL="1";
    if [[ -z "${USE_EINSTALL}" || "${USE_EINSTALL}" = "0" ]]; then
        debug-print "Installing with 'make install'";
        emake DESTDIR="${D}" "scrollkeeper_localstate_dir=${ED}${sk_tmp_dir} " "$@" install || die "install failed";
    else
        debug-print "Installing with 'einstall'";
        einstall "scrollkeeper_localstate_dir=${ED}${sk_tmp_dir} " "$@" || die "einstall failed";
    fi;
    unset GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL;
    if [[ -n "${DOCS}" ]]; then
        dodoc ${DOCS} || die "dodoc failed";
    fi;
    if [[ -z "$(find "${D}" -name '*.omf')" ]]; then
        export SCROLLKEEPER_UPDATE="0";
    fi;
    rm -rf "${ED}${sk_tmp_dir}";
    rm -fr "${ED}/usr/share/applications/mimeinfo.cache"
}
gnome2_src_prepare () 
{ 
    gnome2_omf_fix;
    elibtoolize ${ELTCONF}
}
gnome2_src_unpack () 
{ 
    unpack ${A};
    cd "${S}";
    has ${EAPI:-0} 0 1 && gnome2_src_prepare
}
has () 
{ 
    hasq "$@"
}
has_multilib_profile () 
{ 
    [ -n "${MULTILIB_ABIS}" -a "${MULTILIB_ABIS}" != "${MULTILIB_ABIS/ /}" ]
}
has_phase_defined_up_to () 
{ 
    local phase;
    for phase in unpack prepare configure compile install;
    do
        has ${phase} ${DEFINED_PHASES} && return 0;
        [[ ${phase} == $1 ]] && return 1;
    done;
    return 1
}
has_version () 
{ 
    if [ "${EBUILD_PHASE}" == "depend" ]; then
        die "portageq calls (has_version calls portageq) are not allowed in the global scope";
    fi;
    if [[ -n $PORTAGE_IPC_DAEMON ]]; then
        "$PORTAGE_BIN_PATH"/ebuild-ipc has_version "$ROOT" "$1";
    else
        PYTHONPATH=${PORTAGE_PYM_PATH}${PYTHONPATH:+:}${PYTHONPATH} "${PORTAGE_PYTHON:-/usr/bin/python}" "${PORTAGE_BIN_PATH}/portageq" has_version "${ROOT}" "$1";
    fi;
    local retval=$?;
    case "${retval}" in 
        0 | 1)
            return ${retval}
        ;;
        *)
            die "unexpected portageq exit code: ${retval}"
        ;;
    esac
}
hasg () 
{ 
    local x s=$1;
    shift;
    for x in "$@";
    do
        [[ ${x} == ${s} ]] && echo "${x}" && return 0;
    done;
    return 1
}
hasgq () 
{ 
    hasg "$@" > /dev/null
}
hasq () 
{ 
    [[ " ${*:2} " == *" $1 "* ]]
}
hasv () 
{ 
    if hasq "$@"; then
        echo "$1";
        return 0;
    fi;
    return 1
}
helpers_die () 
{ 
    case "${EAPI:-0}" in 
        0 | 1 | 2 | 3)
            echo -e "$@" 1>&2
        ;;
        *)
            die "$@"
        ;;
    esac
}
inherit () 
{ 
    ECLASS_DEPTH=$(($ECLASS_DEPTH + 1));
    if [[ ${ECLASS_DEPTH} > 1 ]]; then
        debug-print "*** Multiple Inheritence (Level: ${ECLASS_DEPTH})";
    fi;
    if [[ -n $ECLASS && -n ${!__export_funcs_var} ]]; then
        echo "QA Notice: EXPORT_FUNCTIONS is called before inherit in" "$ECLASS.eclass. For compatibility with <=portage-2.1.6.7," "only call EXPORT_FUNCTIONS after inherit(s)." | fmt -w 75 | while read -r; do
            eqawarn "$REPLY";
        done;
    fi;
    local location;
    local olocation;
    local x;
    local PECLASS=$ECLASS;
    local prev_export_funcs_var=$__export_funcs_var;
    local B_IUSE;
    local B_REQUIRED_USE;
    local B_DEPEND;
    local B_RDEPEND;
    local B_PDEPEND;
    while [ "$1" ]; do
        location="${ECLASSDIR}/${1}.eclass";
        olocation="";
        export ECLASS="$1";
        __export_funcs_var=__export_functions_$ECLASS_DEPTH;
        unset $__export_funcs_var;
        if [ "${EBUILD_PHASE}" != "depend" ] && [[ ${EBUILD_PHASE} != *rm ]] && [[ ${EMERGE_FROM} != "binary" ]]; then
            if ! hasq $ECLASS $INHERITED; then
                eqawarn "QA Notice: ECLASS '$ECLASS' inherited illegally in $CATEGORY/$PF $EBUILD_PHASE";
            fi;
        fi;
        if [ -n "$PORTDIR_OVERLAY" ]; then
            local overlay;
            for overlay in ${PORTDIR_OVERLAY};
            do
                olocation="${overlay}/eclass/${1}.eclass";
                if [ -e "$olocation" ]; then
                    location="${olocation}";
                    debug-print "  eclass exists: ${location}";
                fi;
            done;
        fi;
        debug-print "inherit: $1 -> $location";
        [ ! -e "$location" ] && die "${1}.eclass could not be found by inherit()";
        if [ "${location}" == "${olocation}" ] && ! hasq "${location}" ${EBUILD_OVERLAY_ECLASSES}; then
            EBUILD_OVERLAY_ECLASSES="${EBUILD_OVERLAY_ECLASSES} ${location}";
        fi;
        set -f;
        unset B_IUSE B_REQUIRED_USE B_DEPEND B_RDEPEND B_PDEPEND;
        [ "${IUSE+set}" = set ] && B_IUSE="${IUSE}";
        [ "${REQUIRED_USE+set}" = set ] && B_REQUIRED_USE="${REQUIRED_USE}";
        [ "${DEPEND+set}" = set ] && B_DEPEND="${DEPEND}";
        [ "${RDEPEND+set}" = set ] && B_RDEPEND="${RDEPEND}";
        [ "${PDEPEND+set}" = set ] && B_PDEPEND="${PDEPEND}";
        unset IUSE REQUIRED_USE DEPEND RDEPEND PDEPEND;
        set +f;
        qa_source "$location" || die "died sourcing $location in inherit()";
        set -f;
        [ "${IUSE+set}" = set ] && export E_IUSE="${E_IUSE} ${IUSE}";
        [ "${REQUIRED_USE+set}" = set ] && export E_REQUIRED_USE="${E_REQUIRED_USE} ${REQUIRED_USE}";
        [ "${DEPEND+set}" = set ] && export E_DEPEND="${E_DEPEND} ${DEPEND}";
        [ "${RDEPEND+set}" = set ] && export E_RDEPEND="${E_RDEPEND} ${RDEPEND}";
        [ "${PDEPEND+set}" = set ] && export E_PDEPEND="${E_PDEPEND} ${PDEPEND}";
        [ "${B_IUSE+set}" = set ] && IUSE="${B_IUSE}";
        [ "${B_IUSE+set}" = set ] || unset IUSE;
        [ "${B_REQUIRED_USE+set}" = set ] && REQUIRED_USE="${B_REQUIRED_USE}";
        [ "${B_REQUIRED_USE+set}" = set ] || unset REQUIRED_USE;
        [ "${B_DEPEND+set}" = set ] && DEPEND="${B_DEPEND}";
        [ "${B_DEPEND+set}" = set ] || unset DEPEND;
        [ "${B_RDEPEND+set}" = set ] && RDEPEND="${B_RDEPEND}";
        [ "${B_RDEPEND+set}" = set ] || unset RDEPEND;
        [ "${B_PDEPEND+set}" = set ] && PDEPEND="${B_PDEPEND}";
        [ "${B_PDEPEND+set}" = set ] || unset PDEPEND;
        set +f;
        if [[ -n ${!__export_funcs_var} ]]; then
            for x in ${!__export_funcs_var};
            do
                debug-print "EXPORT_FUNCTIONS: $x -> ${ECLASS}_$x";
                declare -F "${ECLASS}_$x" > /dev/null || die "EXPORT_FUNCTIONS: ${ECLASS}_$x is not defined";
                eval "$x() { ${ECLASS}_$x \"\$@\" ; }" > /dev/null;
            done;
        fi;
        unset $__export_funcs_var;
        hasq $1 $INHERITED || export INHERITED="$INHERITED $1";
        shift;
    done;
    ((--ECLASS_DEPTH));
    if (( ECLASS_DEPTH > 0 )); then
        export ECLASS=$PECLASS;
        __export_funcs_var=$prev_export_funcs_var;
    else
        unset ECLASS __export_funcs_var;
    fi;
    return 0
}
insinto () 
{ 
    if [ "$1" == "/" ]; then
        export INSDESTTREE="";
    else
        export INSDESTTREE=$1;
        if [ ! -d "${D}${INSDESTTREE}" ]; then
            install -d "${D}${INSDESTTREE}";
            local ret=$?;
            if [[ $ret -ne 0 ]]; then
                helpers_die "${FUNCNAME[0]} failed";
                return $ret;
            fi;
        fi;
    fi
}
insopts () 
{ 
    export INSOPTIONS="$@";
    hasq -s ${INSOPTIONS} && die "Never call insopts() with -s"
}
into () 
{ 
    if [ "$1" == "/" ]; then
        export DESTTREE="";
    else
        export DESTTREE=$1;
        if [ ! -d "${D}${DESTTREE}" ]; then
            install -d "${D}${DESTTREE}";
            local ret=$?;
            if [[ $ret -ne 0 ]]; then
                helpers_die "${FUNCNAME[0]} failed";
                return $ret;
            fi;
        fi;
    fi
}
is-login-disabled () 
{ 
    shell=$(egetshell "$1");
    case ${shell} in 
        /bin/false | /usr/bin/false | /sbin/nologin | /usr/sbin/nologin)
            return 0
        ;;
        *)
            return 1
        ;;
    esac
}
is_final_abi () 
{ 
    has_multilib_profile || return 0;
    set -- $(get_install_abis);
    local LAST_ABI=$#;
    [[ ${!LAST_ABI} == ${ABI} ]]
}
keepdir () 
{ 
    dodir "$@";
    local x;
    if [ "$1" == "-R" ] || [ "$1" == "-r" ]; then
        shift;
        find "$@" -type d -printf "${D}%p/.keep_${CATEGORY}_${PN}-${SLOT}\n" | tr "\n" "\0" | while read -r -d ''; do
             >> "$REPLY" || die "Failed to recursively create .keep files";
        done;
    else
        for x in "$@";
        do
             >> "${D}${x}/.keep_${CATEGORY}_${PN}-${SLOT}" || die "Failed to create .keep in ${D}${x}";
        done;
    fi
}
lchgrp () 
{ 
    chgrp -h "$@"
}
lchown () 
{ 
    chown -h "$@"
}
libopts () 
{ 
    export LIBOPTIONS="$@";
    hasq -s ${LIBOPTIONS} && die "Never call libopts() with -s"
}
libtoolize () 
{ 
    if ! hasq ${FUNCNAME[1]} eautoreconf eaclocal _elibtoolize eautoheader eautoconf eautomake autotools_run_tool autotools_check_macro autotools_get_subdirs autotools_get_auxdir; then
        eqawarn "QA Notice: 'libtoolize' called by ${FUNCNAME[1]}: ${CATEGORY}/${PF}";
        eqawarn "Use autotools.eclass instead of calling 'libtoolize' directly.";
    fi;
    /usr/bin/libtoolize "$@";
    return $?
}
make_desktop_entry () 
{ 
    [[ -z $1 ]] && die "make_desktop_entry: You must specify the executable";
    local exec=${1};
    local name=${2:-${PN}};
    local icon=${3:-${PN}};
    local type=${4};
    local fields=${5};
    if [[ -z ${type} ]]; then
        local catmaj=${CATEGORY%%-*};
        local catmin=${CATEGORY##*-};
        case ${catmaj} in 
            app)
                case ${catmin} in 
                    accessibility)
                        type=Accessibility
                    ;;
                    admin)
                        type=System
                    ;;
                    antivirus)
                        type=System
                    ;;
                    arch)
                        type=Archiving
                    ;;
                    backup)
                        type=Archiving
                    ;;
                    cdr)
                        type=DiscBurning
                    ;;
                    dicts)
                        type=Dictionary
                    ;;
                    doc)
                        type=Documentation
                    ;;
                    editors)
                        type=TextEditor
                    ;;
                    emacs)
                        type=TextEditor
                    ;;
                    emulation)
                        type=Emulator
                    ;;
                    laptop)
                        type=HardwareSettings
                    ;;
                    office)
                        type=Office
                    ;;
                    pda)
                        type=PDA
                    ;;
                    vim)
                        type=TextEditor
                    ;;
                    xemacs)
                        type=TextEditor
                    ;;
                esac
            ;;
            dev)
                type="Development"
            ;;
            games)
                case ${catmin} in 
                    action | fps)
                        type=ActionGame
                    ;;
                    arcade)
                        type=ArcadeGame
                    ;;
                    board)
                        type=BoardGame
                    ;;
                    emulation)
                        type=Emulator
                    ;;
                    kids)
                        type=KidsGame
                    ;;
                    puzzle)
                        type=LogicGame
                    ;;
                    roguelike)
                        type=RolePlaying
                    ;;
                    rpg)
                        type=RolePlaying
                    ;;
                    simulation)
                        type=Simulation
                    ;;
                    sports)
                        type=SportsGame
                    ;;
                    strategy)
                        type=StrategyGame
                    ;;
                esac;
                type="Game;${type}"
            ;;
            gnome)
                type="Gnome;GTK"
            ;;
            kde)
                type="KDE;Qt"
            ;;
            mail)
                type="Network;Email"
            ;;
            media)
                case ${catmin} in 
                    gfx)
                        type=Graphics
                    ;;
                    *)
                        case ${catmin} in 
                            radio)
                                type=Tuner
                            ;;
                            sound)
                                type=Audio
                            ;;
                            tv)
                                type=TV
                            ;;
                            video)
                                type=Video
                            ;;
                        esac;
                        type="AudioVideo;${type}"
                    ;;
                esac
            ;;
            net)
                case ${catmin} in 
                    dialup)
                        type=Dialup
                    ;;
                    ftp)
                        type=FileTransfer
                    ;;
                    im)
                        type=InstantMessaging
                    ;;
                    irc)
                        type=IRCClient
                    ;;
                    mail)
                        type=Email
                    ;;
                    news)
                        type=News
                    ;;
                    nntp)
                        type=News
                    ;;
                    p2p)
                        type=FileTransfer
                    ;;
                    voip)
                        type=Telephony
                    ;;
                esac;
                type="Network;${type}"
            ;;
            sci)
                case ${catmin} in 
                    astro*)
                        type=Astronomy
                    ;;
                    bio*)
                        type=Biology
                    ;;
                    calc*)
                        type=Calculator
                    ;;
                    chem*)
                        type=Chemistry
                    ;;
                    elec*)
                        type=Electronics
                    ;;
                    geo*)
                        type=Geology
                    ;;
                    math*)
                        type=Math
                    ;;
                    physics)
                        type=Physics
                    ;;
                    visual*)
                        type=DataVisualization
                    ;;
                esac;
                type="Education;Science;${type}"
            ;;
            sys)
                type="System"
            ;;
            www)
                case ${catmin} in 
                    client)
                        type=WebBrowser
                    ;;
                esac;
                type="Network;${type}"
            ;;
            *)
                type=
            ;;
        esac;
    fi;
    if [ "${SLOT}" == "0" ]; then
        local desktop_name="${PN}";
    else
        local desktop_name="${PN}-${SLOT}";
    fi;
    local desktop="${T}/$(echo ${exec} | sed 's:[[:space:]/:]:_:g')-${desktop_name}.desktop";
    type=${type%;}${type:+;};
    eshopts_push -s extglob;
    if [[ -n ${icon} && ${icon} != /* ]] && [[ ${icon} == *.xpm || ${icon} == *.png || ${icon} == *.svg ]]; then
        ewarn "As described in the Icon Theme Specification, icon file extensions are not";
        ewarn "allowed in .desktop files if the value is not an absolute path.";
        icon=${icon%.@(xpm|png|svg)};
    fi;
    eshopts_pop;
    cat > "${desktop}"  <<-EOF
[Desktop Entry]
Name=${name}
Type=Application
Comment=${DESCRIPTION}
Exec=${exec}
TryExec=${exec%% *}
Icon=${icon}
Categories=${type}
EOF

    if [[ ${fields:-=} != *=* ]]; then
        ewarn "make_desktop_entry: update your 5th arg to read Path=${fields}";
        fields="Path=${fields}";
    fi;
    [[ -n ${fields} ]] && printf '%b\n' "${fields}" >> "${desktop}";
    ( insinto /usr/share/applications;
    doins "${desktop}" ) || die "installing desktop file failed"
}
make_session_desktop () 
{ 
    [[ -z $1 ]] && eerror "$0: You must specify the title" && return 1;
    [[ -z $2 ]] && eerror "$0: You must specify the command" && return 1;
    local title=$1;
    local command=$2;
    local desktop=${T}/${wm:-${PN}}.desktop;
    shift 2;
    cat > "${desktop}"  <<-EOF
[Desktop Entry]
Name=${title}
Comment=This session logs you into ${title}
Exec=${command} $*
TryExec=${command}
Type=XSession
EOF

    ( insinto /usr/share/xsessions;
    doins "${desktop}" )
}
make_wrapper () 
{ 
    local wrapper=$1 bin=$2 chdir=$3 libdir=$4 path=$5;
    local tmpwrapper=$(emktemp);
    cat > "${tmpwrapper}"  <<EOF
#!/bin/sh
cd "${chdir:-.}"
if [ -n "${libdir}" ] ; then
	if [ "\${LD_LIBRARY_PATH+set}" = "set" ] ; then
		export LD_LIBRARY_PATH="\${LD_LIBRARY_PATH}:${libdir}"
	else
		export LD_LIBRARY_PATH="${libdir}"
	fi
fi
exec ${bin} "\$@"
EOF

    chmod go+rx "${tmpwrapper}";
    if [[ -n ${path} ]]; then
        ( exeinto "${path}";
        newexe "${tmpwrapper}" "${wrapper}" ) || die;
    else
        newbin "${tmpwrapper}" "${wrapper}" || die;
    fi
}
multilib_env () 
{ 
    local CTARGET=${1:-${CTARGET}};
    case ${CTARGET} in 
        x86_64*)
            export CFLAGS_x86=${CFLAGS_x86--m32};
            export CHOST_x86=${CTARGET/x86_64/i686};
            export CTARGET_x86=${CHOST_x86};
            export CDEFINE_x86="__i386__";
            export LIBDIR_x86="lib32";
            export CFLAGS_amd64=${CFLAGS_amd64--m64};
            export CHOST_amd64=${CTARGET};
            export CTARGET_amd64=${CHOST_amd64};
            export CDEFINE_amd64="__x86_64__";
            export LIBDIR_amd64="lib64";
            export CFLAGS_x32=${CFLAGS_x32--mx32};
            export CHOST_x32=${CTARGET};
            export CTARGET_x32=${CHOST_x32};
            export CDEFINE_x32="__i386__";
            export LIBDIR_x32="libx32";
            : ${MULTILIB_ABIS=amd64 x86};
            : ${DEFAULT_ABI=amd64}
        ;;
        mips64*)
            export CFLAGS_o32=${CFLAGS_o32--mabi=32};
            export CHOST_o32=${CTARGET/mips64/mips};
            export CTARGET_o32=${CHOST_o32};
            export CDEFINE_o32="_MIPS_SIM == _ABIO32";
            export LIBDIR_o32="lib";
            export CFLAGS_n32=${CFLAGS_n32--mabi=n32};
            export CHOST_n32=${CTARGET};
            export CTARGET_n32=${CHOST_n32};
            export CDEFINE_n32="_MIPS_SIM == _ABIN32";
            export LIBDIR_n32="lib32";
            export CFLAGS_n64=${CFLAGS_n64--mabi=64};
            export CHOST_n64=${CTARGET};
            export CTARGET_n64=${CHOST_n64};
            export CDEFINE_n64="_MIPS_SIM == _ABI64";
            export LIBDIR_n64="lib64";
            : ${MULTILIB_ABIS=n64 n32 o32};
            : ${DEFAULT_ABI=n32}
        ;;
        powerpc64*)
            export CFLAGS_ppc=${CFLAGS_ppc--m32};
            export CHOST_ppc=${CTARGET/powerpc64/powerpc};
            export CTARGET_ppc=${CHOST_ppc};
            export CDEFINE_ppc="!__powerpc64__";
            export LIBDIR_ppc="lib";
            export CFLAGS_ppc64=${CFLAGS_ppc64--m64};
            export CHOST_ppc64=${CTARGET};
            export CTARGET_ppc64=${CHOST_ppc64};
            export CDEFINE_ppc64="__powerpc64__";
            export LIBDIR_ppc64="lib64";
            : ${MULTILIB_ABIS=ppc64 ppc};
            : ${DEFAULT_ABI=ppc64}
        ;;
        s390x*)
            export CFLAGS_s390=${CFLAGS_s390--m31};
            export CHOST_s390=${CTARGET/s390x/s390};
            export CTARGET_s390=${CHOST_s390};
            export CDEFINE_s390="!__s390x__";
            export LIBDIR_s390="lib";
            export CFLAGS_s390x=${CFLAGS_s390x--m64};
            export CHOST_s390x=${CTARGET};
            export CTARGET_s390x=${CHOST_s390x};
            export CDEFINE_s390x="__s390x__";
            export LIBDIR_s390x="lib64";
            : ${MULTILIB_ABIS=s390x s390};
            : ${DEFAULT_ABI=s390x}
        ;;
        sparc*)
            export CFLAGS_sparc32=${CFLAGS_sparc32};
            export CHOST_sparc32=${CTARGET/sparc64/sparc};
            export CTARGET_sparc32=${CHOST_sparc32};
            export CDEFINE_sparc32="!__arch64__";
            export LIBDIR_sparc32="lib";
            export CFLAGS_sparc64=${CFLAGS_sparc64--m64};
            export CHOST_sparc64=${CTARGET};
            export CTARGET_sparc64=${CHOST_sparc64};
            export CDEFINE_sparc64="__arch64__";
            export LIBDIR_sparc64="lib64";
            : ${MULTILIB_ABIS=sparc64 sparc32};
            : ${DEFAULT_ABI=sparc64}
        ;;
        *)
            : ${MULTILIB_ABIS=default};
            : ${DEFAULT_ABI=default}
        ;;
    esac;
    export MULTILIB_ABIS DEFAULT_ABI
}
multilib_toolchain_setup () 
{ 
    local v vv;
    export ABI=$1;
    if [[ ${__DEFAULT_ABI_SAVED} == "true" ]]; then
        for v in CHOST CBUILD AS CC CXX LD;
        do
            vv="__abi_saved_${v}";
            export ${v}="${!vv}";
            unset ${vv};
        done;
        unset __DEFAULT_ABI_SAVED;
    fi;
    if [[ ${ABI} != ${DEFAULT_ABI} ]]; then
        for v in CHOST CBUILD AS CC CXX LD;
        do
            export __abi_saved_${v}="${!v}";
        done;
        export __DEFAULT_ABI_SAVED="true";
        export CHOST=$(get_abi_CHOST ${DEFAULT_ABI});
        export AS="$(tc-getAS) $(get_abi_ASFLAGS)";
        export CC="$(tc-getCC) $(get_abi_CFLAGS)";
        export CXX="$(tc-getCXX) $(get_abi_CFLAGS)";
        export LD="$(tc-getLD) $(get_abi_LDFLAGS)";
        export CHOST=$(get_abi_CHOST $1);
        export CBUILD=$(get_abi_CHOST $1);
    fi
}
newicon () 
{ 
    ( insinto /usr/share/pixmaps;
    newins "$@" )
}
newmenu () 
{ 
    ( insinto /usr/share/applications;
    newins "$@" )
}
nonfatal () 
{ 
    if has "${EAPI:-0}" 0 1 2 3 3_pre2; then
        die "$FUNCNAME() not supported in this EAPI";
    fi;
    if [[ $# -lt 1 ]]; then
        die "$FUNCNAME(): Missing argument";
    fi;
    PORTAGE_NONFATAL=1 "$@"
}
number_abis () 
{ 
    get_install_abis | wc -w
}
path_exists () 
{ 
    local opt=$1;
    [[ ${opt} == -[ao] ]] && shift || opt="-a";
    [[ $# -eq 0 ]] && return 1;
    local p r=0;
    for p in "$@";
    do
        [[ -e ${p} ]];
        : $(( r += $? ));
    done;
    case ${opt} in 
        -a)
            return $(( r != 0 ))
        ;;
        -o)
            return $(( r == $# ))
        ;;
    esac
}
pkg_nofetch () 
{ 
    _eapi0_pkg_nofetch "$@"
}
pkg_postinst () 
{ 
    gnome2_pkg_postinst "$@"
}
pkg_postrm () 
{ 
    gnome2_pkg_postrm "$@"
}
pkg_preinst () 
{ 
    gnome2_pkg_preinst "$@"
}
pkg_setup () 
{ 
    DOCS="AUTHORS NEWS README";
    G2CONF="${G2CONF}
		--disable-static
		--without-gnome
		--with-apache-module-dir="${T}"
		$(use_enable introspection)
		$(use_enable ssl)"
}
portageq () 
{ 
    if [ "${EBUILD_PHASE}" == "depend" ]; then
        die "portageq calls are not allowed in the global scope";
    fi;
    PYTHONPATH=${PORTAGE_PYM_PATH}${PYTHONPATH:+:}${PYTHONPATH} "${PORTAGE_PYTHON:-/usr/bin/python}" "${PORTAGE_BIN_PATH}/portageq" "$@"
}
post_src_install () 
{ 
    if [ ! -z ${MANLINGUAS} ]; then
        local mandir="${D}"usr/share/man;
        if [ -d "${mandir}" ]; then
            local lang l c;
            pushd "${mandir}" > /dev/null;
            for l in *;
            do
                c=0;
                for lang in ${MANLINGUAS};
                do
                    if ! [ "${l#${lang}}" = "${l}" ] || ! [ "${l#man}" = "${l}" ]; then
                        c=$((${c}+1));
                    fi;
                    if [ -z "$(find ${mandir}/${l} -name "man*" 2>/dev/null)" ]; then
                        c=$((${c}+1));
                    fi;
                done;
                if [ ${c} = "0" ]; then
                    ewarn "Deleting '${mandir}/${l}'";
                    rm -fr "${mandir}/${l}";
                fi;
            done;
            popd > /dev/null;
        fi;
    fi
}
prep_ml_includes () 
{ 
    if [[ $(number_abis) -gt 1 ]]; then
        local dir;
        local dirs;
        local base;
        if [[ $# -eq 0 ]]; then
            dirs=/usr/include;
        else
            dirs="$@";
        fi;
        for dir in ${dirs};
        do
            base=${T}/gentoo-multilib/${dir}/gentoo-multilib;
            mkdir -p "${base}";
            [[ -d ${base}/${ABI} ]] && rm -rf "${base}/${ABI}";
            mv "${D}/${dir}" "${base}/${ABI}";
        done;
        if is_final_abi; then
            base=${T}/gentoo-multilib;
            pushd "${base}";
            find . | tar -c -T - -f - | tar -x --no-same-owner -f - -C "${D}";
            popd;
            set --;
            for dir in ${dirs};
            do
                set -- "$@" "${dir}";
                local abi;
                for abi in $(get_install_abis);
                do
                    set -- "$@" "$(get_abi_CDEFINE ${abi}):${dir}/gentoo-multilib/${abi}";
                done;
                create_ml_includes "$@";
            done;
        fi;
    fi
}
preprocess_ebuild_env () 
{ 
    local _portage_filter_opts="";
    if [ -f "${T}/environment.raw" ]; then
        _portage_filter_opts+=" --filter-features --filter-locale --filter-path --filter-sandbox";
    fi;
    filter_readonly_variables $_portage_filter_opts < "${T}"/environment >> "$T/environment.filtered" || return $?;
    unset _portage_filter_opts;
    mv "${T}"/environment.filtered "${T}"/environment || return $?;
    rm -f "${T}/environment.success" || return $?;
    ( export SANDBOX_ON=1;
    source "${T}/environment" || exit $?;
    export SANDBOX_ON=0;
    source "${PORTAGE_BIN_PATH}/isolated-functions.sh" || exit $?;
    save_ebuild_env || exit $?;
     >> "$T/environment.success" || exit $? ) > "${T}/environment.filtered";
    local retval;
    if [ -e "${T}/environment.success" ]; then
        filter_readonly_variables --filter-features < "${T}/environment.filtered" > "${T}/environment";
        retval=$?;
    else
        retval=1;
    fi;
    rm -f "${T}"/environment.{filtered,raw,success};
    return ${retval}
}
preserve_old_lib () 
{ 
    if [[ ${EBUILD_PHASE} != "preinst" ]]; then
        eerror "preserve_old_lib() must be called from pkg_preinst() only";
        die "Invalid preserve_old_lib() usage";
    fi;
    [[ -z $1 ]] && die "Usage: preserve_old_lib <library to preserve> [more libraries to preserve]";
    has preserve-libs ${FEATURES} && return 0;
    local lib dir;
    for lib in "$@";
    do
        [[ -e ${ROOT}/${lib} ]] || continue;
        dir=${lib%/*};
        dodir ${dir} || die "dodir ${dir} failed";
        cp "${ROOT}"/${lib} "${D}"/${lib} || die "cp ${lib} failed";
        touch "${D}"/${lib};
    done
}
preserve_old_lib_notify () 
{ 
    if [[ ${EBUILD_PHASE} != "postinst" ]]; then
        eerror "preserve_old_lib_notify() must be called from pkg_postinst() only";
        die "Invalid preserve_old_lib_notify() usage";
    fi;
    has preserve-libs ${FEATURES} && return 0;
    local lib notice=0;
    for lib in "$@";
    do
        [[ -e ${ROOT}/${lib} ]] || continue;
        if [[ ${notice} -eq 0 ]]; then
            notice=1;
            ewarn "Old versions of installed libraries were detected on your system.";
            ewarn "In order to avoid breaking packages that depend on these old libs,";
            ewarn "the libraries are not being removed.  You need to run revdep-rebuild";
            ewarn "in order to remove these old dependencies.  If you do not have this";
            ewarn "helper program, simply emerge the 'gentoolkit' package.";
            ewarn;
        fi;
        ewarn "  # revdep-rebuild --library '${lib}'";
    done;
    if [[ ${notice} -eq 1 ]]; then
        ewarn;
        ewarn "Once you've finished running revdep-rebuild, it should be safe to";
        ewarn "delete the old libraries.  Here is a copy & paste for the lazy:";
        for lib in "$@";
        do
            ewarn "  # rm '${lib}'";
        done;
    fi
}
qa_call () 
{ 
    local shopts=$(shopt) OLDIFS="$IFS";
    local retval;
    "$@";
    retval=$?;
    set +e;
    [[ $shopts != $(shopt) ]] && eqawarn "QA Notice: Global shell options changed and were not restored while calling '$*'";
    [[ "$IFS" != "$OLDIFS" ]] && eqawarn "QA Notice: Global IFS changed and was not restored while calling '$*'";
    return $retval
}
qa_source () 
{ 
    local shopts=$(shopt) OLDIFS="$IFS";
    local retval;
    source "$@";
    retval=$?;
    set +e;
    [[ $shopts != $(shopt) ]] && eqawarn "QA Notice: Global shell options changed and were not restored while sourcing '$*'";
    [[ "$IFS" != "$OLDIFS" ]] && eqawarn "QA Notice: Global IFS changed and was not restored while sourcing '$*'";
    return $retval
}
quiet_mode () 
{ 
    [[ ${PORTAGE_QUIET} -eq 1 ]]
}
register_die_hook () 
{ 
    local x;
    for x in $*;
    do
        hasq $x $EBUILD_DEATH_HOOKS || export EBUILD_DEATH_HOOKS="$EBUILD_DEATH_HOOKS $x";
    done
}
register_success_hook () 
{ 
    local x;
    for x in $*;
    do
        hasq $x $EBUILD_SUCCESS_HOOKS || export EBUILD_SUCCESS_HOOKS="$EBUILD_SUCCESS_HOOKS $x";
    done
}
remove_path_entry () 
{ 
    [ "${IFS:-unset}" != "unset" ] && old_IFS="${IFS}";
    IFS=":";
    stripped_path="${PATH}";
    while [ -n "$1" ]; do
        cur_path="";
        for p in ${stripped_path};
        do
            if [ "${p/${1}}" == "${p}" ]; then
                cur_path="${cur_path}:${p}";
            fi;
        done;
        stripped_path="${cur_path#:*}";
        shift;
    done;
    if [ "${old_IFS:-unset}" != "unset" ]; then
        IFS="${old_IFS}";
        unset old_IFS;
    else
        unset IFS;
    fi;
    PATH="${stripped_path}"
}
save_ebuild_env () 
{ 
    ( if hasq --exclude-init-phases $*; then
        unset S _E_DOCDESTTREE_ _E_EXEDESTTREE_;
        if [[ -n $PYTHONPATH ]]; then
            export PYTHONPATH=${PYTHONPATH/${PORTAGE_PYM_PATH}:};
            [[ -z $PYTHONPATH ]] && unset PYTHONPATH;
        fi;
    fi;
    unset COLORTERM DISPLAY EDITOR LESS LESSOPEN LOGNAME LS_COLORS PAGER TERM TERMCAP USER ftp_proxy http_proxy no_proxy;
    unset CVS_RSH ECHANGELOG_USER GPG_AGENT_INFO SSH_AGENT_PID SSH_AUTH_SOCK STY WINDOW XAUTHORITY;
    unset ${!CCACHE_*} ${!DISTCC_*};
    for x in pkg_setup pkg_nofetch src_unpack src_prepare src_configure src_compile src_test src_install pkg_preinst pkg_postinst pkg_prerm pkg_postrm;
    do
        unset -f default_$x _eapi{0,1,2,3,4}_$x;
    done;
    unset x;
    unset -f assert assert_sigpipe_ok dump_trace die diefunc quiet_mode vecho elog_base eqawarn elog esyslog einfo einfon ewarn eerror ebegin _eend eend KV_major KV_minor KV_micro KV_to_int get_KV unset_colors set_colors has has_phase_defined_up_to hasg hasgq hasv hasq qa_source qa_call addread addwrite adddeny addpredict _sb_append_var lchown lchgrp esyslog use usev useq has_version portageq best_version use_with use_enable register_die_hook keepdir unpack strip_duplicate_slashes econf einstall dyn_setup dyn_unpack dyn_clean into insinto exeinto docinto insopts diropts exeopts libopts docompress abort_handler abort_prepare abort_configure abort_compile abort_test abort_install dyn_prepare dyn_configure dyn_compile dyn_test dyn_install dyn_preinst dyn_help debug-print debug-print-function debug-print-section inherit EXPORT_FUNCTIONS remove_path_entry save_ebuild_env filter_readonly_variables preprocess_ebuild_env source_all_bashrcs ebuild_main ebuild_phase ebuild_phase_with_hooks _ebuild_arg_to_phase _ebuild_phase_funcs default _pipestatus ${QA_INTERCEPTORS};
    unset ACCEPT_LICENSE BAD BRACKET BUILD_PREFIX COLS DISTCC_DIR DISTDIR DOC_SYMLINKS_DIR EBUILD_FORCE_TEST EBUILD_MASTER_PID ECLASS_DEPTH ENDCOL FAKEROOTKEY GOOD HILITE HOME LAST_E_CMD LAST_E_LEN LD_PRELOAD MISC_FUNCTIONS_ARGS MOPREFIX NOCOLOR NORMAL PKGDIR PKGUSE PKG_LOGDIR PKG_TMPDIR PORTAGE_BASHRCS_SOURCED PORTAGE_NONFATAL PORTAGE_QUIET PORTAGE_SANDBOX_DENY PORTAGE_SANDBOX_PREDICT PORTAGE_SANDBOX_READ PORTAGE_SANDBOX_WRITE PREROOTPATH QA_INTERCEPTORS RC_DEFAULT_INDENT RC_DOT_PATTERN RC_ENDCOL RC_INDENTATION ROOT ROOTPATH RPMDIR TEMP TMP TMPDIR USE_EXPAND WARN XARGS _RC_GET_KV_CACHE;
    unset DOC_SYMLINKS_DIR INSTALL_MASK PKG_INSTALL_MASK;
    declare -p;
    declare -fp;
    if [[ ${BASH_VERSINFO[0]} == 3 ]]; then
        export;
    fi )
}
seq () 
{ 
    local p=$(type -P seq);
    if [[ -n ${p} ]]; then
        "${p}" "$@";
        return $?;
    fi;
    case $# in 
        1)
            min=1 max=$1 step=1
        ;;
        2)
            min=$1 max=$2 step=1
        ;;
        3)
            min=$1 max=$3 step=$2
        ;;
        *)
            die "seq called with wrong number of arguments"
        ;;
    esac;
    p=$(type -P jot);
    if [[ -n ${p} ]]; then
        local reps;
        if [[ ${step} != 0 ]]; then
            reps=$(( (max - min) / step + 1 ));
        else
            reps=0;
        fi;
        jot $reps $min $max $step;
        return $?;
    fi;
    while :; do
        [[ $max < $min && $step > 0 ]] && break;
        [[ $min < $max && $step < 0 ]] && break;
        echo $min;
        : $(( min += step ));
    done;
    return 0
}
set_colors () 
{ 
    COLS=${COLUMNS:-0};
    (( COLS == 0 )) && COLS=$(set -- $(stty size 2>/dev/null) ; echo $2);
    (( COLS > 0 )) || (( COLS = 80 ));
    ENDCOL='[A['$(( COLS - 8 ))'C';
    if [ -n "${PORTAGE_COLORMAP}" ]; then
        eval ${PORTAGE_COLORMAP};
    else
        GOOD='[32;01m';
        WARN='[33;01m';
        BAD='[31;01m';
        HILITE='[36;01m';
        BRACKET='[34;01m';
    fi;
    NORMAL='[0m'
}
source_all_bashrcs () 
{ 
    [[ $PORTAGE_BASHRCS_SOURCED = 1 ]] && return 0;
    PORTAGE_BASHRCS_SOURCED=1;
    local x;
    local OCC="${CC}" OCXX="${CXX}";
    if [[ $EBUILD_PHASE != depend ]]; then
        [ "${IFS:-unset}" != "unset" ] && old_IFS="${IFS}";
        IFS='
';
        local path_array=($PROFILE_PATHS);
        if [ "${old_IFS:-unset}" != "unset" ]; then
            IFS="${old_IFS}";
            unset old_IFS;
        else
            unset IFS;
        fi;
        for x in "${path_array[@]}";
        do
            [ -f "$x/profile.bashrc" ] && qa_source "$x/profile.bashrc";
        done;
    fi;
    for x in "${PORTAGE_BASHRC}" "${PM_EBUILD_HOOK_DIR}"/${CATEGORY}/{${PN},${PN}:${SLOT},${P},${PF}};
    do
        if [ -r "${x}" ]; then
            if [ "$PORTAGE_DEBUG" != "1" ] || [ "${-/x/}" != "$-" ]; then
                source "${x}";
            else
                set -x;
                source "${x}";
                set +x;
            fi;
        fi;
    done;
    [ ! -z "${OCC}" ] && export CC="${OCC}";
    [ ! -z "${OCXX}" ] && export CXX="${OCXX}"
}
src_compile () 
{ 
    gnome2_src_compile "$@"
}
src_configure () 
{ 
    addpredict /usr/share/snmp/mibs/.index;
    gnome2_src_configure
}
src_install () 
{ 
    gnome2_src_install "$@"
}
src_prepare () 
{ 
    gnome2_src_prepare;
    if ! use test; then
        sed 's/^\(SUBDIRS =.*\)tests\(.*\)$/\1\2/' -i Makefile.am Makefile.in || die "sed failed";
    fi;
    if use doc; then
        epatch "${FILESDIR}/${PN}-2.30.1-fix-build-without-gnome-with-doc.patch";
        eautoreconf;
    fi
}
src_test () 
{ 
    set > set.out;
    default_src_test
}
src_unpack () 
{ 
    gnome2_src_unpack "$@"
}
strip-linguas () 
{ 
    local ls newls nols;
    if [[ $1 == "-i" ]] || [[ $1 == "-u" ]]; then
        local op=$1;
        shift;
        ls=$(find "$1" -name '*.po' -exec basename {} .po ';');
        shift;
        local d f;
        for d in "$@";
        do
            if [[ ${op} == "-u" ]]; then
                newls=${ls};
            else
                newls="";
            fi;
            for f in $(find "$d" -name '*.po' -exec basename {} .po ';');
            do
                if [[ ${op} == "-i" ]]; then
                    hasq ${f} ${ls} && newls="${newls} ${f}";
                else
                    hasq ${f} ${ls} || newls="${newls} ${f}";
                fi;
            done;
            ls=${newls};
        done;
    else
        ls="$@";
    fi;
    nols="";
    newls="";
    for f in ${LINGUAS};
    do
        if hasq ${f} ${ls}; then
            newls="${newls} ${f}";
        else
            nols="${nols} ${f}";
        fi;
    done;
    [[ -n ${nols} ]] && ewarn "Sorry, but ${PN} does not support the LINGUAS:" ${nols};
    export LINGUAS=${newls:1}
}
strip_duplicate_slashes () 
{ 
    if [[ -n $1 ]]; then
        local removed=$1;
        while [[ ${removed} == *//* ]]; do
            removed=${removed//\/\///};
        done;
        echo ${removed};
    fi
}
tc-arch () 
{ 
    tc-ninja_magic_to_arch portage "$@"
}
tc-arch-kernel () 
{ 
    tc-ninja_magic_to_arch kern "$@"
}
tc-endian () 
{ 
    local host=$1;
    [[ -z ${host} ]] && host=${CTARGET:-${CHOST}};
    host=${host%%-*};
    case ${host} in 
        alpha*)
            echo big
        ;;
        arm*b*)
            echo big
        ;;
        arm*)
            echo little
        ;;
        cris*)
            echo little
        ;;
        hppa*)
            echo big
        ;;
        i?86*)
            echo little
        ;;
        ia64*)
            echo little
        ;;
        m68*)
            echo big
        ;;
        mips*l*)
            echo little
        ;;
        mips*)
            echo big
        ;;
        powerpc*)
            echo big
        ;;
        s390*)
            echo big
        ;;
        sh*b*)
            echo big
        ;;
        sh*)
            echo little
        ;;
        sparc*)
            echo big
        ;;
        x86_64*)
            echo little
        ;;
        *)
            echo wtf
        ;;
    esac
}
tc-export () 
{ 
    local var;
    for var in "$@";
    do
        [[ $(type -t tc-get${var}) != "function" ]] && die "tc-export: invalid export variable '${var}'";
        eval tc-get${var} > /dev/null;
    done
}
tc-getAR () 
{ 
    tc-getPROG AR ar "$@"
}
tc-getAS () 
{ 
    tc-getPROG AS as "$@"
}
tc-getBUILD_CC () 
{ 
    local v;
    for v in CC_FOR_BUILD BUILD_CC HOSTCC;
    do
        if [[ -n ${!v} ]]; then
            export BUILD_CC=${!v};
            echo "${!v}";
            return 0;
        fi;
    done;
    local search=;
    if [[ -n ${CBUILD} ]]; then
        search=$(type -p ${CBUILD}-gcc);
        search=${search##*/};
    fi;
    search=${search:-gcc};
    export BUILD_CC=${search};
    echo "${search}"
}
tc-getCC () 
{ 
    tc-getPROG CC gcc "$@"
}
tc-getCPP () 
{ 
    tc-getPROG CPP cpp "$@"
}
tc-getCXX () 
{ 
    tc-getPROG CXX g++ "$@"
}
tc-getDLLWRAP () 
{ 
    tc-getPROG DLLWRAP dllwrap "$@"
}
tc-getF77 () 
{ 
    tc-getPROG F77 gfortran "$@"
}
tc-getFC () 
{ 
    tc-getPROG FC gfortran "$@"
}
tc-getGCJ () 
{ 
    tc-getPROG GCJ gcj "$@"
}
tc-getLD () 
{ 
    tc-getPROG LD ld "$@"
}
tc-getNM () 
{ 
    tc-getPROG NM nm "$@"
}
tc-getOBJCOPY () 
{ 
    tc-getPROG OBJCOPY objcopy "$@"
}
tc-getPKG_CONFIG () 
{ 
    tc-getPROG PKG_CONFIG pkg-config "$@"
}
tc-getPROG () 
{ 
    local var=$1;
    local prog=$2;
    if [[ -n ${!var} ]]; then
        echo "${!var}";
        return 0;
    fi;
    local search=;
    [[ -n $3 ]] && search=$(type -p "$3-${prog}");
    [[ -z ${search} && -n ${CHOST} ]] && search=$(type -p "${CHOST}-${prog}");
    [[ -n ${search} ]] && prog=${search##*/};
    export ${var}=${prog};
    echo "${!var}"
}
tc-getRANLIB () 
{ 
    tc-getPROG RANLIB ranlib "$@"
}
tc-getRC () 
{ 
    tc-getPROG RC windres "$@"
}
tc-getSTRIP () 
{ 
    tc-getPROG STRIP strip "$@"
}
tc-has-openmp () 
{ 
    local base="${T}/test-tc-openmp";
    cat > "${base}.c"  <<-EOF
#include <omp.h>
int main() {
int nthreads, tid, ret = 0;
#pragma omp parallel private(nthreads, tid)
{
tid = omp_get_thread_num();
nthreads = omp_get_num_threads(); ret += tid + nthreads;
}
return ret;
}
EOF

    $(tc-getCC "$@") -fopenmp "${base}.c" -o "${base}" &>/dev/null;
    local ret=$?;
    rm -f "${base}"*;
    return ${ret}
}
tc-has-tls () 
{ 
    local base="${T}/test-tc-tls";
    cat > "${base}.c"  <<-EOF
int foo(int *i) {
static __thread int j = 0;
return *i ? j : *i;
}
EOF

    local flags;
    case $1 in 
        -s)
            flags="-S"
        ;;
        -c)
            flags="-c"
        ;;
        -l)

        ;;
        -*)
            die "Usage: tc-has-tls [-c|-l] [toolchain prefix]"
        ;;
    esac;
    : ${flags:=-fPIC -shared -Wl,-z,defs};
    [[ $1 == -* ]] && shift;
    $(tc-getCC "$@") ${flags} "${base}.c" -o "${base}" &>/dev/null;
    local ret=$?;
    rm -f "${base}"*;
    return ${ret}
}
tc-is-cross-compiler () 
{ 
    return $([[ ${CBUILD:-${CHOST}} != ${CHOST} ]])
}
tc-is-hardfloat () 
{ 
    [[ ${CTARGET//_/-} == *-hardfloat-* ]] && echo "yes" || echo "no"
}
tc-is-softfloat () 
{ 
    case ${CTARGET} in 
        bfin* | h8300*)
            echo "only"
        ;;
        *)
            [[ ${CTARGET//_/-} == *-softfloat-* ]] && echo "yes" || echo "no"
        ;;
    esac
}
tc-is-static-only () 
{ 
    local host=${CTARGET:-${CHOST}};
    return $([[ ${host} == *-mint* ]])
}
tc-ninja_magic_to_arch () 
{ 
    function ninj () 
    { 
        [[ ${type} == "kern" ]] && echo $1 || echo $2
    };
    local type=$1;
    local host=$2;
    [[ -z ${host} ]] && host=${CTARGET:-${CHOST}};
    case ${host} in 
        alpha*)
            echo alpha
        ;;
        arm*)
            echo arm
        ;;
        avr*)
            ninj avr32 avr
        ;;
        bfin*)
            ninj blackfin bfin
        ;;
        cris*)
            echo cris
        ;;
        hppa*)
            ninj parisc hppa
        ;;
        i?86*)
            if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -lt $(KV_to_int 2.6.24) || ${host} == *freebsd* ]]; then
                echo i386;
            else
                echo x86;
            fi
        ;;
        ia64*)
            echo ia64
        ;;
        m68*)
            echo m68k
        ;;
        mips*)
            echo mips
        ;;
        nios2*)
            echo nios2
        ;;
        nios*)
            echo nios
        ;;
        powerpc*)
            if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -ge $(KV_to_int 2.6.16) ]]; then
                echo powerpc;
            else
                if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -eq $(KV_to_int 2.6.15) ]]; then
                    if [[ ${host} == powerpc64* ]] || [[ ${PROFILE_ARCH} == "ppc64" ]]; then
                        echo powerpc;
                    else
                        echo ppc;
                    fi;
                else
                    if [[ ${host} == powerpc64* ]]; then
                        echo ppc64;
                    else
                        if [[ ${PROFILE_ARCH} == "ppc64" ]]; then
                            ninj ppc64 ppc;
                        else
                            echo ppc;
                        fi;
                    fi;
                fi;
            fi
        ;;
        s390*)
            echo s390
        ;;
        sh64*)
            ninj sh64 sh
        ;;
        sh*)
            echo sh
        ;;
        sparc64*)
            ninj sparc64 sparc
        ;;
        sparc*)
            [[ ${PROFILE_ARCH} == "sparc64" ]] && ninj sparc64 sparc || echo sparc
        ;;
        vax*)
            echo vax
        ;;
        x86_64*)
            if [[ ${type} == "kern" ]] && [[ $(KV_to_int ${KV}) -ge $(KV_to_int 2.6.24) ]]; then
                echo x86;
            else
                ninj x86_64 amd64;
            fi
        ;;
        *)
            echo unknown
        ;;
    esac
}
treecopy () 
{ 
    dest=${!#};
    files_count=$#;
    while (( $# > 1 )); do
        dirstruct=$(dirname "$1");
        mkdir -p "${dest}/${dirstruct}";
        cp -pPR "$1" "${dest}/${dirstruct}";
        shift;
    done
}
uclibctoolize () 
{ 
    die "Use elibtoolize"
}
unpack () 
{ 
    local srcdir;
    local x;
    local y;
    local myfail;
    local eapi=${EAPI:-0};
    [ -z "$*" ] && die "Nothing passed to the 'unpack' command";
    for x in "$@";
    do
        vecho ">>> Unpacking ${x} to ${PWD}";
        y=${x%.*};
        y=${y##*.};
        if [[ ${x} == "./"* ]]; then
            srcdir="";
        else
            if [[ ${x} == ${DISTDIR%/}/* ]]; then
                die "Arguments to unpack() cannot begin with \${DISTDIR}.";
            else
                if [[ ${x} == "/"* ]]; then
                    die "Arguments to unpack() cannot be absolute";
                else
                    srcdir="${DISTDIR}/";
                fi;
            fi;
        fi;
        [[ ! -s ${srcdir}${x} ]] && die "${x} does not exist";
        function _unpack_tar () 
        { 
            if [ "${y}" == "tar" ]; then
                $1 -c -- "$srcdir$x" | tar xof -;
                assert_sigpipe_ok "$myfail";
            else
                $1 -c -- "${srcdir}${x}" > ${x%.*} || die "$myfail";
            fi
        };
        myfail="failure unpacking ${x}";
        case "${x##*.}" in 
            tar)
                tar xof "$srcdir$x" || die "$myfail"
            ;;
            tgz)
                tar xozf "$srcdir$x" || die "$myfail"
            ;;
            tbz | tbz2)
                ${PORTAGE_BUNZIP2_COMMAND:-${PORTAGE_BZIP2_COMMAND} -d} -c -- "$srcdir$x" | tar xof -;
                assert_sigpipe_ok "$myfail"
            ;;
            ZIP | zip | jar)
                ( while true; do
                    echo n || break;
                done ) | unzip -qo "${srcdir}${x}" || die "$myfail"
            ;;
            gz | Z | z)
                _unpack_tar "gzip -d"
            ;;
            bz2 | bz)
                _unpack_tar "${PORTAGE_BUNZIP2_COMMAND:-${PORTAGE_BZIP2_COMMAND} -d}"
            ;;
            7Z | 7z)
                local my_output;
                my_output="$(7z x -y "${srcdir}${x}")";
                if [ $? -ne 0 ]; then
                    echo "${my_output}" 1>&2;
                    die "$myfail";
                fi
            ;;
            RAR | rar)
                unrar x -idq -o+ "${srcdir}${x}" || die "$myfail"
            ;;
            LHa | LHA | lha | lzh)
                lha xfq "${srcdir}${x}" || die "$myfail"
            ;;
            a)
                ar x "${srcdir}${x}" || die "$myfail"
            ;;
            deb)
                if type -P deb2targz > /dev/null; then
                    y=${x##*/};
                    local created_symlink=0;
                    if [ ! "$srcdir$x" -ef "$y" ]; then
                        ln -sf "$srcdir$x" "$y" || die "$myfail";
                        created_symlink=1;
                    fi;
                    deb2targz "$y" || die "$myfail";
                    if [ $created_symlink = 1 ]; then
                        rm -f "$y";
                    fi;
                    mv -f "${y%.deb}".tar.gz data.tar.gz || die "$myfail";
                else
                    ar x "$srcdir$x" || die "$myfail";
                fi
            ;;
            lzma)
                _unpack_tar "lzma -d"
            ;;
            xz)
                if hasq $eapi 0 1 2; then
                    vecho "unpack ${x}: file format not recognized. Ignoring.";
                else
                    _unpack_tar "xz -d";
                fi
            ;;
            *)
                vecho "unpack ${x}: file format not recognized. Ignoring."
            ;;
        esac;
    done;
    find . -mindepth 1 -maxdepth 1 ! -type l -print0 | ${XARGS} -0 chmod -fR a+rX,u+w,g-w,o-w
}
unpack_makeself () 
{ 
    local src_input=${1:-${A}};
    local src=$(find_unpackable_file "${src_input}");
    local skip=$2;
    local exe=$3;
    [[ -z ${src} ]] && die "Could not locate source for '${src_input}'";
    local shrtsrc=$(basename "${src}");
    echo ">>> Unpacking ${shrtsrc} to ${PWD}";
    if [[ -z ${skip} ]]; then
        local ver=$(grep -m1 -a '#.*Makeself' "${src}" | awk '{print $NF}');
        local skip=0;
        exe=tail;
        case ${ver} in 
            1.5.* | 1.6.0-nv)
                skip=$(grep -a ^skip= "${src}" | cut -d= -f2)
            ;;
            2.0 | 2.0.1)
                skip=$(grep -a ^'	'tail "${src}" | awk '{print $2}' | cut -b2-)
            ;;
            2.1.1)
                skip=$(grep -a ^offset= "${src}" | awk '{print $2}' | cut -b2-);
                (( skip++ ))
            ;;
            2.1.2)
                skip=$(grep -a ^offset= "${src}" | awk '{print $3}' | head -n 1);
                (( skip++ ))
            ;;
            2.1.3)
                skip=`grep -a ^offset= "${src}" | awk '{print $3}'`;
                (( skip++ ))
            ;;
            2.1.4 | 2.1.5)
                skip=$(grep -a offset=.*head.*wc "${src}" | awk '{print $3}' | head -n 1);
                skip=$(head -n ${skip} "${src}" | wc -c);
                exe="dd"
            ;;
            *)
                eerror "I'm sorry, but I was unable to support the Makeself file.";
                eerror "The version I detected was '${ver}'.";
                eerror "Please file a bug about the file ${shrtsrc} at";
                eerror "http://bugs.gentoo.org/ so that support can be added.";
                die "makeself version '${ver}' not supported"
            ;;
        esac;
        debug-print "Detected Makeself version ${ver} ... using ${skip} as offset";
    fi;
    case ${exe} in 
        tail)
            exe="tail -n +${skip} '${src}'"
        ;;
        dd)
            exe="dd ibs=${skip} skip=1 if='${src}'"
        ;;
        *)
            die "makeself cant handle exe '${exe}'"
        ;;
    esac;
    local tmpfile=$(emktemp);
    eval ${exe} 2> /dev/null | head -c 512 > "${tmpfile}";
    local filetype=$(file -b "${tmpfile}");
    case ${filetype} in 
        *tar\ archive*)
            eval ${exe} | tar --no-same-owner -xf -
        ;;
        bzip2*)
            eval ${exe} | bzip2 -dc | tar --no-same-owner -xf -
        ;;
        gzip*)
            eval ${exe} | tar --no-same-owner -xzf -
        ;;
        compress*)
            eval ${exe} | gunzip | tar --no-same-owner -xf -
        ;;
        *)
            eerror "Unknown filetype \"${filetype}\" ?";
            false
        ;;
    esac;
    assert "failure unpacking (${filetype}) makeself ${shrtsrc} ('${ver}' +${skip})"
}
unpack_pdv () 
{ 
    local src=$(find_unpackable_file "$1");
    local sizeoff_t=$2;
    [[ -z ${src} ]] && die "Could not locate source for '$1'";
    [[ -z ${sizeoff_t} ]] && die "No idea what off_t size was used for this pdv :(";
    local shrtsrc=$(basename "${src}");
    echo ">>> Unpacking ${shrtsrc} to ${PWD}";
    local metaskip=$(tail -c ${sizeoff_t} "${src}" | hexdump -e \"%i\");
    local tailskip=$(tail -c $((${sizeoff_t}*2)) "${src}" | head -c ${sizeoff_t} | hexdump -e \"%i\");
    local metafile=$(emktemp);
    tail -c +$((${metaskip}+1)) "${src}" > "${metafile}";
    local datafile=$(tail -c +$((${metaskip}+1)) "${src}" | strings | head -n 1);
    datafile=$(basename "${datafile}");
    local tmpfile=$(emktemp);
    tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c 512 > ${tmpfile};
    local iscompressed=$(file -b "${tmpfile}");
    if [[ ${iscompressed:0:8} == "compress" ]]; then
        iscompressed=1;
        mv ${tmpfile}{,.Z};
        gunzip ${tmpfile};
    else
        iscompressed=0;
    fi;
    local istar=$(file -b "${tmpfile}");
    if [[ ${istar:0:9} == "POSIX tar" ]]; then
        istar=1;
    else
        istar=0;
    fi;
    if [ ${iscompressed} -eq 1 ]; then
        if [ ${istar} -eq 1 ]; then
            tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) | tar -xzf -;
        else
            tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) | gzip -dc > ${datafile};
        fi;
    else
        if [ ${istar} -eq 1 ]; then
            tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) | tar --no-same-owner -xf -;
        else
            tail -c +$((${tailskip}+1)) ${src} 2> /dev/null | head -c $((${metaskip}-${tailskip})) > ${datafile};
        fi;
    fi;
    true
}
unset_colors () 
{ 
    COLS=80;
    ENDCOL=;
    GOOD=;
    WARN=;
    BAD=;
    NORMAL=;
    HILITE=;
    BRACKET=
}
use () 
{ 
    useq ${1}
}
use_enable () 
{ 
    if [ -z "$1" ]; then
        echo "!!! use_enable() called without a parameter." 1>&2;
        echo "!!! use_enable <USEFLAG> [<flagname> [value]]" 1>&2;
        return 1;
    fi;
    if ! has "${EAPI:-0}" 0 1 2 3; then
        local UE_SUFFIX=${3+=$3};
    else
        local UE_SUFFIX=${3:+=$3};
    fi;
    local UWORD=${2:-$1};
    if useq $1; then
        echo "--enable-${UWORD}${UE_SUFFIX}";
    else
        echo "--disable-${UWORD}";
    fi;
    return 0
}
use_with () 
{ 
    if [ -z "$1" ]; then
        echo "!!! use_with() called without a parameter." 1>&2;
        echo "!!! use_with <USEFLAG> [<flagname> [value]]" 1>&2;
        return 1;
    fi;
    if ! has "${EAPI:-0}" 0 1 2 3; then
        local UW_SUFFIX=${3+=$3};
    else
        local UW_SUFFIX=${3:+=$3};
    fi;
    local UWORD=${2:-$1};
    if useq $1; then
        echo "--with-${UWORD}${UW_SUFFIX}";
    else
        echo "--without-${UWORD}";
    fi;
    return 0
}
useq () 
{ 
    local u=$1;
    local found=0;
    if [[ ${u:0:1} == "!" ]]; then
        u=${u:1};
        found=1;
    fi;
    if [[ $EBUILD_PHASE = depend ]]; then
        true;
    else
        if [[ -n $PORTAGE_IUSE && -n $EBUILD_PHASE ]]; then
            [[ $u =~ $PORTAGE_IUSE ]] || eqawarn "QA Notice: USE Flag '${u}' not" "in IUSE for ${CATEGORY}/${PF}";
        fi;
    fi;
    if hasq ${u} ${USE}; then
        return ${found};
    else
        return $((!found));
    fi
}
usev () 
{ 
    if useq ${1}; then
        echo "${1#!}";
        return 0;
    fi;
    return 1
}
validate_desktop_entries () 
{ 
    if [[ -x /usr/bin/desktop-file-validate ]]; then
        einfo "Checking desktop entry validity";
        local directories="";
        for d in /usr/share/applications $@;
        do
            [[ -d ${D}${d} ]] && directories="${directories} ${D}${d}";
        done;
        if [[ -n ${directories} ]]; then
            for FILE in $(find ${directories} -name "*\.desktop" 							-not -path '*.hidden*' | sort -u 2>/dev/null);
            do
                local temp=$(desktop-file-validate ${FILE} | grep -v "warning:" | 								sed -e "s|error: ||" -e "s|${FILE}:|--|g" );
                [[ -n $temp ]] && elog ${temp/--/${FILE/${D}/}:};
            done;
        fi;
        echo "";
    else
        einfo "Passing desktop entry validity check. Install dev-util/desktop-file-utils, if you want to help to improve Gentoo.";
    fi
}
vecho () 
{ 
    quiet_mode || echo "$@"
}