dmesg output

dmesg (text/plain), 12.42 KB, created by Martin Diers on 2004-02-25 13:35:29 UTC

Linux version 2.6.3-love3 (root@teilo3) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #3 Tue Feb 24 09:56:37 CST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
 BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
 BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
 BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
 BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable)
 BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 130944
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126848 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
Sony Vaio laptop detected.
ACPI: RSDP (v000 PTLTD                                     ) @ 0x000f7690
ACPI: RSDT (v001   SONY       B0 0x20020813 PTL  0x00000000) @ 0x1fefa7b7
ACPI: FADT (v001   SONY       B0 0x20020813 PTL  0x01000000) @ 0x1fefed9b
ACPI: BOOT (v001   SONY       B0 0x20020813 PTL  0x00000001) @ 0x1fefee0f
ACPI: SSDT (v001   SONY       B0 0x20020813 PTL  0x00000001) @ 0x1fefee37
ACPI: SSDT (v001   SONY       B0 0x20020813 PTL  0x00000001) @ 0x1fefef1e
ACPI: DSDT (v001   SONY       B0 0x20020813 PTL  0x0100000d) @ 0x00000000
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/hda4 video=radeonfb vga=834 elevator=cfq pci=noacpi 3
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1193.433 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 512960k/523776k available (3315k kernel code, 9980k reserved, 1099k data, 156k init, 0k highmem)
Calibrating delay loop... 2351.10 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 3febf9ff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 3febf9ff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU:     After all inits, caps: 3febf9ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9ca, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9)
ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 9)
ACPI: PCI Interrupt Link [LNKG] (IRQs 9)
ACPI: PCI Interrupt Link [LNKH] (IRQs 9)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX/ICH [8086/248c] at 0000:00:1f.0
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=12, xclk=18300 from BIOS
radeonfb: probed DDR SGRAM 16384k videoram
radeon_get_moninfo: bios 4 scratch = 1000004
radeonfb: panel ID string: Samsung LTN150P1-L02    
radeonfb: detected DFP panel size from BIOS: 1400x1050
radeonfb: ATI Radeon M7 LW DDR SGRAM 16 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected
radeonfb_pci_register END
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch ([e-mail])
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 [e-mail]).
udf: registering filesystem
SGI XFS with large block numbers, no debug enabled
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states)
ACPI: Thermal Zone [ATF0] (27 C)
hStart = 1440, hEnd = 1552, hTotal = 1688
vStart = 1050, vEnd = 1053, vTotal = 1063
h_total_disp = 0xae00d2	   hsync_strt_wid = 0x8e059a
v_total_disp = 0x4190426	   vsync_strt_wid = 0x830419
post div = 0x2
fb_div = 0x60
ppll_div_3 = 0x10060
ron = 1856, roff = 24304
vclk_freq = 10800, per = 868
Console: switching to colour frame buffer device 175x65
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xec000000
[drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon LW Mobility 7500 M7
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: No IRQ known for interrupt pin B of device 0000:00:1f.6. Please try using pci=biosirq.
Using cfq io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
e100: Intel(R) PRO/100 Network Driver, 3.0.13_dev
e100: Copyright(c) 1999-2004 Intel Corporation
PCI: Found IRQ 9 for device 0000:02:08.0
e100: eth0: e100_probe: addr 0xe8200000, irq 9, MAC addr 08:00:46:5B:FA:30
orinoco.c 0.13e (David Gibson <[e-mail]> and others)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK3018GAS, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: UJDA730 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB), CHS=58140/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci1394: $Rev: 1131 $ Ben Collins <[e-mail]>
PCI: No IRQ known for interrupt pin C of device 0000:02:05.2. Please try using pci=biosirq.
ohci1394: Failed to allocate shared interrupt 0
ohci1394: probe of 0000:02:05.2 failed with error -12
Console: switching to colour frame buffer device 175x65
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC).
PCI: Setting latency timer of device 0000:00:1f.5 to 64
MC'97 1 converters and GPIO not ready (0xff00)
intel8x0_measure_ac97_clock: measured 38248 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel 82801CA-ICH3 at 0x1c00, irq 9
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda4) for (hda4)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 156k freed
Adding 506036k swap on /dev/hda3.  Priority:-1 extents:1
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 3 for device 0000:02:05.0
Yenta: CardBus bridge found at 0000:02:05.0 [104d:8104]
Yenta: ISA IRQ mask 0x0c80, PCI irq 3
Socket status: 30000410
PCI: No IRQ known for interrupt pin B of device 0000:02:05.1. Please try using pci=biosirq.
Yenta: CardBus bridge found at 0000:02:05.1 [104d:8104]
Yenta: ISA IRQ mask 0x0cb0, PCI irq 0
Socket status: 30000006
sonypi: Sony Programmable I/O Controller Driver v1.21.
sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on
sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
sonypi: device allocated minor is 63
Sony VAIO Jog Dial installed.
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 9 for device 0000:00:1d.0
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 9, io base 00001800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.1
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 9, io base 00001820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: No IRQ known for interrupt pin C of device 0000:00:1d.2. Please try using pci=biosirq.
drivers/usb/core/hcd-pci.c: Found HC with no IRQ.  Check BIOS/PCI 0000:00:1d.2 setup!
found reiserfs format "3.6" with standard journal
usb 1-2: new low speed USB device using address 2
input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer®] on usb-0000:00:1d.0-2
Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda1) for (hda1)
Using r5 hash to sort names
blk: queue dfca7600, I/O limit 4095Mb (mask 0xffffffff)
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04Aborted Command 
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
Intel ISA PCIC probe: not found.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco_cs.c 0.13e (David Gibson <[e-mail]> and others)
eth1: Station identity 001f:0002:0001:0004
eth1: Looks like an Intersil firmware version 1.4.2
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:DD:32:D7:2F
eth1: Station name "Prism  I"
eth1: ready
eth1: index 0x01: Vcc 5.0, irq 10, io 0x0100-0x013f
eth1: New link status: Connected (0001)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
svgalib_helper: no version for "struct_module" found: kernel tainted.
svgalib_helper: no version magic, tainting kernel.
svgalib_helper: Initializing, version 1.9.18
svgalib_helper: device1: vendor:1002 id:4c57
device1: region0, base=f0000000 len=134217728 type=8
device1: region1, base=00003000 len=256 type=1
device1: region2, base=e8100000 len=65536 type=0
no device found