Attachment 259609 Details for Bug 351423 – dmesg

dmesg

dmesg-vanilla (text/plain), 30.52 KB, created by Xake on 2011-01-12 08:44:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Xake

Created: 2011-01-12 08:44:48 UTC

Size: 30.52 KB

patch

obsolete

> assigned bus number 2
>[    1.804740] ehci_hcd 0000:00:1d.7: debug port 1
>[    1.808634] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
>[    1.808651] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
>[    1.817755] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.818021] hub 2-0:1.0: USB hub found
>[    1.818027] hub 2-0:1.0: 6 ports detected
>[    1.818154] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.818178] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    1.818183] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    1.818186] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    1.818195] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    1.818218] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
>[    1.818483] hub 3-0:1.0: USB hub found
>[    1.818491] hub 3-0:1.0: 2 ports detected
>[    1.818583]   alloc irq_desc for 21 on node -1
>[    1.818584]   alloc kstat_irqs on node -1
>[    1.818587] alloc irq_2_iommu on node -1
>[    1.818592] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>[    1.818598] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    1.818600] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    1.818607] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    1.818641] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
>[    1.818887] hub 4-0:1.0: USB hub found
>[    1.818893] hub 4-0:1.0: 2 ports detected
>[    1.818972]   alloc irq_desc for 19 on node -1
>[    1.818973]   alloc kstat_irqs on node -1
>[    1.818976] alloc irq_2_iommu on node -1
>[    1.818981] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>[    1.818987] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[    1.818989] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    1.818996] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    1.819030] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
>[    1.819289] hub 5-0:1.0: USB hub found
>[    1.819295] hub 5-0:1.0: 2 ports detected
>[    1.819377] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    1.819382] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    1.819385] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.819393] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    1.819415] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
>[    1.819664] hub 6-0:1.0: USB hub found
>[    1.819671] hub 6-0:1.0: 2 ports detected
>[    1.819761] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    1.819766] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    1.819769] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.819775] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    1.819798] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
>[    1.820035] hub 7-0:1.0: USB hub found
>[    1.820041] hub 7-0:1.0: 2 ports detected
>[    1.820121] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.820127] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    1.820129] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.820136] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    1.820158] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
>[    1.820397] hub 8-0:1.0: USB hub found
>[    1.820403] hub 8-0:1.0: 2 ports detected
>[    1.820565] usbcore: registered new interface driver cdc_acm
>[    1.820567] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
>[    1.820568] Initializing USB Mass Storage driver...
>[    1.820629] usbcore: registered new interface driver usb-storage
>[    1.820630] USB Mass Storage support registered.
>[    1.820799] usbcore: registered new interface driver libusual
>[    1.820843] usbcore: registered new interface driver ums-alauda
>[    1.820886] usbcore: registered new interface driver ums-cypress
>[    1.820932] usbcore: registered new interface driver ums-datafab
>[    1.820975] usbcore: registered new interface driver ums-freecom
>[    1.821016] usbcore: registered new interface driver ums-isd200
>[    1.821057] usbcore: registered new interface driver ums-jumpshot
>[    1.821100] usbcore: registered new interface driver ums-karma
>[    1.821142] usbcore: registered new interface driver ums-onetouch
>[    1.821183] usbcore: registered new interface driver ums-sddr09
>[    1.821226] usbcore: registered new interface driver ums-sddr55
>[    1.821268] usbcore: registered new interface driver ums-usbat
>[    1.821353] usbcore: registered new interface driver usbserial
>[    1.821354] usbserial: USB Serial Driver core
>[    1.821451] USB Serial support registered for FTDI USB Serial Device
>[    1.821530] usbcore: registered new interface driver ftdi_sio
>[    1.821531] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
>[    1.821576] usbcore: registered new interface driver emi26 - firmware loader
>[    1.821618] usbcore: registered new interface driver emi62 - firmware loader
>[    1.821660] usbcore: registered new interface driver rio500
>[    1.821661] rio500: v1.1:USB Rio 500 driver
>[    1.821768] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
>[    1.821770] PNP: PS/2 controller doesn't have KBD irq; using default 1
>[    1.823288] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.823313] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.823518] mice: PS/2 mouse device common for all mice
>[    1.823844] rtc_cmos 00:03: RTC can wake from S4
>[    1.824092] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    1.824123] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.824254] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    1.824263] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [irq 1024-1039 pref disabled]
>[    1.824265] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.824392] lirc_dev: IR Remote Control driver registered, major 251 
>[    1.824409] IR LIRC bridge handler initialized
>[    1.824410] Linux video capture interface: v2.00
>[    1.824444] gspca: main v2.10.0 registered
>[    1.824490] usbcore: registered new interface driver STV06xx
>[    1.824491] STV06xx: registered
>[    1.824601] usbcore: registered new interface driver uvcvideo
>[    1.824602] USB Video Class driver (v0.1.0)
>[    1.824638] Driver for 1-wire Dallas network protocol.
>[    1.825604] coretemp coretemp.0: TjMax is 100 C.
>[    1.825750] coretemp coretemp.1: TjMax is 100 C.
>[    1.825880] coretemp coretemp.2: TjMax is 100 C.
>[    1.825996] coretemp coretemp.3: TjMax is 100 C.
>[    1.826169] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>[    1.826310] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
>[    1.826443] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    1.826461] md: linear personality registered for level -1
>[    1.826463] md: raid0 personality registered for level 0
>[    1.826465] md: raid1 personality registered for level 1
>[    1.826466] md: raid10 personality registered for level 10
>[    1.826467] md: raid6 personality registered for level 6
>[    1.826469] md: raid5 personality registered for level 5
>[    1.826470] md: raid4 personality registered for level 4
>[    1.826471] md: multipath personality registered for level -4
>[    1.826473] md: faulty personality registered for level -5
>[    1.826567] device-mapper: uevent: version 1.0.3
>[    1.826760] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
>[    1.826844] device-mapper: multipath: version 1.1.1 loaded
>[    1.826861] device-mapper: multipath round-robin: version 1.0.0 loaded
>[    1.826863] device-mapper: multipath queue-length: version 0.1.0 loaded
>[    1.826864] device-mapper: multipath service-time: version 0.2.0 loaded
>[    1.827014] device-mapper: dm-log-userspace: version 1.0.0 loaded
>[    1.827016] Bluetooth: Generic Bluetooth USB driver ver 0.6
>[    1.827065] usbcore: registered new interface driver btusb
>[    1.827066] EDAC MC: Ver: 2.1.0 Jan 12 2011
>[    1.827266] PCI: Discovered peer bus ff
>[    1.829808] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0
>[    1.829981] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
>[    1.830011] EDAC i7core: Driver loaded.
>[    1.831245] cpuidle: using governor ladder
>[    1.833777] cpuidle: using governor menu
>[    1.834946] usbcore: registered new interface driver hiddev
>[    1.834991] usbcore: registered new interface driver usbhid
>[    1.834993] usbhid: USB HID core driver
>[    1.835647]   alloc irq_desc for 22 on node -1
>[    1.835649]   alloc kstat_irqs on node -1
>[    1.835652] alloc irq_2_iommu on node -1
>[    1.835657] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[    1.835695]   alloc irq_desc for 69 on node -1
>[    1.835696]   alloc kstat_irqs on node -1
>[    1.835698] alloc irq_2_iommu on node -1
>[    1.835709] HDA Intel 0000:00:1b.0: irq 69 for MSI/MSI-X
>[    1.835750] HDA Intel 0000:00:1b.0: setting latency timer to 64
>[    1.946532] ata9.00: ATA-7: SAMSUNG SP1614N, TM100-30, max UDMA/100
>[    1.946534] ata9.00: 312581808 sectors, multi 0: LBA48 
>[    1.973355] ata9.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100
>[    1.973359] ata9.01: 488397168 sectors, multi 0: LBA48 
>[    1.976340] ata9.00: configured for UDMA/100
>[    1.979456] ata9.01: configured for UDMA/100
>[    2.080703] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.081671] ata1.00: ATA-8: Hitachi HDS721032CLA362, JPFOA3EA, max UDMA/133
>[    2.081682] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.082658] ata1.00: configured for UDMA/133
>[    2.091709] ata7: SATA link down (SStatus 0 SControl 300)
>[    2.091771] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.093348] ata8.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
>[    2.093352] ata8.00: applying bridge limits
>[    2.094251] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72103 JPFO PQ: 0 ANSI: 5
>[    2.094954] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>[    2.095019] sd 0:0:0:0: [sda] Write Protect is off
>[    2.095021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.095054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.095671] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.115406]  sda: sda1
>[    2.115417] sda: p1 size 1250275324 extends beyond EOD, enabling native capacity
>[    2.116040]  sda: sda1
>[    2.116045] sda: p1 size 1250275324 extends beyond EOD, truncated
>[    2.116742] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.203638] hda_codec: AD1989B: BIOS auto-probing.
>[    2.203839] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input2
>[    2.207323] usbcore: registered new interface driver snd-usb-audio
>[    2.207325] ALSA device list:
>[    2.207326]   #0: HDA Intel at 0xf7ff8000 irq 69
>[    2.207444] oprofile: using NMI interrupt.
>[    2.207474] Netfilter messages via NETLINK v0.30.
>[    2.207636] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    2.207725] TCP cubic registered
>[    2.207727] Initializing XFRM netlink socket
>[    2.208164] NET: Registered protocol family 10
>[    2.208697] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    2.208725] IPv6 over IPv4 tunneling driver
>[    2.208969] NET: Registered protocol family 17
>[    2.208978] NET: Registered protocol family 15
>[    2.209037] Bluetooth: L2CAP ver 2.15
>[    2.209039] Bluetooth: L2CAP socket layer initialized
>[    2.209044] Bluetooth: SCO (Voice Link) ver 0.6
>[    2.209045] Bluetooth: SCO socket layer initialized
>[    2.209085] Bluetooth: RFCOMM TTY layer initialized
>[    2.209090] Bluetooth: RFCOMM socket layer initialized
>[    2.209092] Bluetooth: RFCOMM ver 1.11
>[    2.209093] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    2.209095] Bluetooth: BNEP filters: protocol multicast
>[    2.209097] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>[    2.213150] SCTP: Hash tables configured (established 37449 bind 37449)
>[    2.213435] Registering the dns_resolver key type
>[    2.219911] registered taskstats version 1
>[    2.220610] rtc_cmos 00:03: setting system clock to 2011-01-12 09:26:24 UTC (1294824384)
>[    2.360530] usb 1-5: new high speed USB device using ehci_hcd and address 5
>[    2.477043] hub 1-5:1.0: USB hub found
>[    2.477341] hub 1-5:1.0: 4 ports detected
>[    2.685347] usb 3-1: new full speed USB device using uhci_hcd and address 2
>[    2.818275] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.819198] ata2.00: ATA-8: Hitachi HDS721032CLA362, JPFOA3EA, max UDMA/133
>[    2.819203] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.820205] ata2.00: configured for UDMA/133
>[    2.831403] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72103 JPFO PQ: 0 ANSI: 5
>[    2.832168] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>[    2.832372] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.832377] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.832428] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.832522] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    2.853906]  sdb: unknown partition table
>[    2.854551] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.893757] ata8.00: configured for PIO4
>[    3.125100] usb 4-1: new low speed USB device using uhci_hcd and address 2
>[    3.449378] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3
>[    3.450491] generic-usb 0003:06A3:8021.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:1a.1-1/input0
>[    3.554878] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    3.568323] ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA5CA, max UDMA/133
>[    3.568327] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    3.569319] ata3.00: configured for UDMA/133
>[    3.580017] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
>[    3.581050] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    3.581165] sd 2:0:0:0: [sdc] Write Protect is off
>[    3.581169] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    3.581214] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.581355] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[    3.602074] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input4
>[    3.603321] generic-usb 0003:06A3:8021.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:1a.1-1/input1
>[    3.609311]  sdc: sdc1 sdc2
>[    3.609385] sdc: p2 size 976574464 extends beyond EOD, enabling native capacity
>[    3.611067]  sdc: sdc1 sdc2
>[    3.611136] sdc: p2 size 976574464 extends beyond EOD, truncated
>[    3.611983] sd 2:0:0:0: [sdc] Attached SCSI disk
>[    3.808724] usb 4-2: new full speed USB device using uhci_hcd and address 3
>[    3.975849] input: Razer Razer Mamba as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5
>[    3.976495] generic-usb 0003:1532:000A.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Mamba] on usb-0000:00:1a.1-2/input0
>[    3.981750] input: Razer Razer Mamba as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input6
>[    3.982129] generic-usb 0003:1532:000A.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer Mamba] on usb-0000:00:1a.1-2/input1
>[    4.303484] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    4.308625] ata4.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
>[    4.308629] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    4.313811] ata4.00: configured for UDMA/133
>[    4.324620] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>[    4.325529] sd 3:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    4.325633] sd 3:0:0:0: [sdd] Write Protect is off
>[    4.325637] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    4.325680] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.325857] sd 3:0:0:0: Attached scsi generic sg3 type 0
>[    4.336676]  sdd: unknown partition table
>[    4.337424] sd 3:0:0:0: [sdd] Attached SCSI disk
>[    5.048074] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    5.054598] ata5.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
>[    5.054603] ata5.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    5.061241] ata5.00: configured for UDMA/133
>[    5.072192] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
>[    5.073052] sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>[    5.073158] sd 4:0:0:0: [sde] Write Protect is off
>[    5.073162] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>[    5.073207] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.073462] sd 4:0:0:0: Attached scsi generic sg4 type 0
>[    5.109181]  sde: sde1
>[    5.110162] sd 4:0:0:0: [sde] Attached SCSI disk
>[    5.377899] ata6: SATA link down (SStatus 0 SControl 300)
>[    5.390299] scsi 7:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223C  SB05 PQ: 0 ANSI: 5
>[    5.399470] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
>[    5.399475] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    5.400384] sr 7:0:0:0: Attached scsi CD-ROM sr0
>[    5.400933] sr 7:0:0:0: Attached scsi generic sg5 type 5
>[    5.401339] scsi 8:0:0:0: Direct-Access     ATA      SAMSUNG SP1614N  TM10 PQ: 0 ANSI: 5
>[    5.401974] sd 8:0:0:0: [sdf] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    5.402153] sd 8:0:0:0: [sdf] Write Protect is off
>[    5.402160] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
>[    5.402231] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.402302] sd 8:0:0:0: Attached scsi generic sg6 type 0
>[    5.402733] scsi 8:0:1:0: Direct-Access     ATA      WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5
>[    5.403472] sd 8:0:1:0: Attached scsi generic sg7 type 0
>[    5.409488]  sdf: sdf1 sdf2
>[    5.409540] sd 8:0:1:0: [sdg] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    5.409706] sd 8:0:1:0: [sdg] Write Protect is off
>[    5.409710] sd 8:0:1:0: [sdg] Mode Sense: 00 3a 00 00
>[    5.409793] sd 8:0:1:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    5.410421] sd 8:0:0:0: [sdf] Attached SCSI disk
>[    5.413652]  sdg: sdg1
>[    5.414490] sd 8:0:1:0: [sdg] Attached SCSI disk
>[    5.565513] Freeing unused kernel memory: 588k freed
>[    5.565599] Write protecting the kernel read-only data: 14336k
>[    5.567409] Freeing unused kernel memory: 2012k freed
>[    5.568505] Freeing unused kernel memory: 808k freed
>[    7.485479] md: md127 stopped.
>[    7.488606] md: bind<sda>
>[    7.488959] md: bind<sdb>
>[    7.658587] md: md126 stopped.
>[    7.659333] md: bind<sdb>
>[    7.659652] md: bind<sda>
>[    7.666250] md/raid0:md126: looking at sda
>[    7.666253] md/raid0:md126:   comparing sda(625137920) with sda(625137920)
>[    7.666256] md/raid0:md126:   END
>[    7.666257] md/raid0:md126:   ==> UNIQUE
>[    7.666259] md/raid0:md126: 1 zones
>[    7.666260] md/raid0:md126: looking at sdb
>[    7.666262] md/raid0:md126:   comparing sdb(625137920) with sda(625137920)
>[    7.666264] md/raid0:md126:   EQUAL
>[    7.666266] md/raid0:md126: FINAL 1 zones
>[    7.666268] md/raid0:md126: done.
>[    7.666270] md/raid0:md126: md_size is 1250275328 sectors.
>[    7.666272] ******* md126 configuration *********
>[    7.666273] zone0=[sda/sdb/]
>[    7.666277]         zone offset=0kb device offset=0kb size=625137920kb
>[    7.666278] **********************************
>[    7.666279] 
>[    7.666313] md126: detected capacity change from 0 to 640140967936
>[    7.667024]  md126: p1
>[    7.683377] md: md125 stopped.
>[    7.685657] md: bind<sdc>
>[    7.685760] md: bind<sdd>
>[    7.717827] md: md124 stopped.
>[    7.718199] md: bind<sdd>
>[    7.718372] md: bind<sdc>
>[    7.722852] md/raid0:md124: looking at sdc
>[    7.722855] md/raid0:md124:   comparing sdc(488391936) with sdc(488391936)
>[    7.722858] md/raid0:md124:   END
>[    7.722860] md/raid0:md124:   ==> UNIQUE
>[    7.722861] md/raid0:md124: 1 zones
>[    7.722863] md/raid0:md124: looking at sdd
>[    7.722865] md/raid0:md124:   comparing sdd(488391936) with sdc(488391936)
>[    7.722867] md/raid0:md124:   EQUAL
>[    7.722869] md/raid0:md124: FINAL 1 zones
>[    7.722871] md/raid0:md124: done.
>[    7.722873] md/raid0:md124: md_size is 976783360 sectors.
>[    7.722875] ******* md124 configuration *********
>[    7.722876] zone0=[sdc/sdd/]
>[    7.722880]         zone offset=0kb device offset=0kb size=488391936kb
>[    7.722881] **********************************
>[    7.722882] 
>[    7.722893] md124: detected capacity change from 0 to 500113080320
>[    7.772491]  md124: p1 p2
>[    7.973546] EXT3-fs (dm-3): error: couldn't mount because of unsupported optional features (240)
>[    7.974197] EXT2-fs (dm-3): error: couldn't mount because of unsupported optional features (240)
>[    8.036972] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
>[   11.124204] udev[4374]: starting version 164
>[   11.513660] md124: detected capacity change from 0 to 500113080320
>[   11.514339]  md124: p1 p2
>[   18.561631] EXT4-fs (dm-3): re-mounted. Opts: (null)
>[   18.778838] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
>[   18.831328] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
>[   18.882913] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
>[   18.924838] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   18.989222] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
>[   19.058322] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
>[   19.076055] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   23.571492] dmeventd (5185): /proc/5185/oom_adj is deprecated, please use /proc/5185/oom_score_adj instead.
>[   24.881111] microcode: CPU0 updated to revision 0x11, date = 2009-04-14
>[   24.881598] microcode: CPU1 updated to revision 0x11, date = 2009-04-14
>[   24.882058] microcode: CPU2 updated to revision 0x11, date = 2009-04-14
>[   24.882652] microcode: CPU3 updated to revision 0x11, date = 2009-04-14
>[   24.883110] microcode: CPU4 updated to revision 0x11, date = 2009-04-14
>[   24.883704] microcode: CPU5 updated to revision 0x11, date = 2009-04-14
>[   24.884167] microcode: CPU6 updated to revision 0x11, date = 2009-04-14
>[   24.884729] microcode: CPU7 updated to revision 0x11, date = 2009-04-14
>[   25.614030] [drm] nouveau 0000:02:00.0: unknown parameter 15
>[   25.614660] [drm] nouveau 0000:02:00.0: unknown parameter 15
>[   25.614836] [drm] nouveau 0000:02:00.0: unknown parameter 16
>[   26.038171] [drm] nouveau 0000:02:00.0: Allocating FIFO number 2
>[   26.050167] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 2
>[   26.465839] sky2 0000:06:00.0: eth0: enabling interface
>[   26.466438] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   26.470687] sky2 0000:04:00.0: eth1: enabling interface
>[   26.471171] ADDRCONF(NETDEV_UP): eth1: link is not ready
>[   26.632877] [drm] nouveau 0000:02:00.0: unknown parameter 15
>[   26.788787] [drm] nouveau 0000:02:00.0: Allocating FIFO number 3
>[   26.800611] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 3
>[   28.943820] sky2 0000:06:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
>[   28.944342] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   29.594682] ata1.00: configured for UDMA/133
>[   29.594685] ata1: EH complete
>[   29.601575] 
>[   29.601576] =======================================================
>[   29.601590] [ INFO: possible circular locking dependency detected ]
>[   29.601596] 2.6.36.2 #1
>[   29.601599] -------------------------------------------------------
>[   29.601604] kworker/0:1/11 is trying to acquire lock:
>[   29.601609]  (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff811915d6>] revalidate_disk+0x56/0x90
>[   29.601623] 
>[   29.601623] but task is already holding lock:
>[   29.601629]  (&ap->scsi_scan_mutex){+.+.+.}, at: [<ffffffff81511350>] ata_scsi_dev_rescan+0x30/0x130
>[   29.601642] 
>[   29.601643] which lock already depends on the new lock.
>[   29.601643] 
>[   29.601651] 
>[   29.601651] the existing dependency chain (in reverse order) is:
>[   29.601658] 
>[   29.601658] -> #3 (&ap->scsi_scan_mutex){+.+.+.}:
>[   29.601668]        [<ffffffff810bfea3>] lock_acquire+0x93/0x180
>[   29.601676]        [<ffffffff817fdedb>] mutex_lock_nested+0x4b/0x380
>[   29.601684]        [<ffffffff81511350>] ata_scsi_dev_rescan+0x30/0x130
>[   29.601692]        [<ffffffff810a25f8>] process_one_work+0x188/0x510
>[   29.601701]        [<ffffffff810a44a9>] worker_thread+0x169/0x340
>[   29.601708]        [<ffffffff810a9216>] kthread+0x96/0xa0
>[   29.601716]        [<ffffffff81038ad4>] kernel_thread_helper+0x4/0x10
>[   29.601724] 
>[   29.601724] -> #2 ((&ap->scsi_rescan_task)){+.+.+.}:
>[   29.601733]        [<ffffffff810bfea3>] lock_acquire+0x93/0x180
>[   29.601740]        [<ffffffff810a25e2>] process_one_work+0x172/0x510
>[   29.601748]        [<ffffffff810a44a9>] worker_thread+0x169/0x340
>[   29.601755]        [<ffffffff810a9216>] kthread+0x96/0xa0
>[   29.602313]        [<ffffffff81038ad4>] kernel_thread_helper+0x4/0x10
>[   29.602321] 
>[   29.602322] -> #1 (events){+.+.+.}:
>[   29.602330]        [<ffffffff810bfea3>] lock_acquire+0x93/0x180
>[   29.602337]        [<ffffffff810a3247>] flush_work+0x127/0x1c0
>[   29.602344]        [<ffffffff810a50a3>] schedule_on_each_cpu+0xe3/0x120
>[   29.602352]        [<ffffffff8111dff0>] lru_add_drain_all+0x10/0x20
>[   29.602359]        [<ffffffff8118ace8>] invalidate_bdev+0x28/0x40
>[   29.602366]        [<ffffffff81190d6a>] __invalidate_device+0x4a/0x60
>[   29.602374]        [<ffffffff813771b1>] invalidate_partition+0x31/0x50
>[   29.602382]        [<ffffffff811bcede>] rescan_partitions+0x5e/0x550
>[   29.602390]        [<ffffffff81192196>] __blkdev_get+0x1a6/0x3c0
>[   29.602397]        [<ffffffff811923bb>] blkdev_get+0xb/0x10
>[   29.602404]        [<ffffffff811bce65>] register_disk+0x155/0x170
>[   29.602412]        [<ffffffff813773e1>] add_disk+0xa1/0x160
>[   29.602418]        [<ffffffff814fe3c1>] sd_probe_async+0x111/0x1c0
>[   29.602426]        [<ffffffff810b177d>] async_run_entry_fn+0x7d/0x180
>[   29.602436]        [<ffffffff810a25f8>] process_one_work+0x188/0x510
>[   29.602443]        [<ffffffff810a44a9>] worker_thread+0x169/0x340
>[   29.602450]        [<ffffffff810a9216>] kthread+0x96/0xa0
>[   29.602457]        [<ffffffff81038ad4>] kernel_thread_helper+0x4/0x10
>[   29.602465] 
>[   29.602465] -> #0 (&bdev->bd_mutex){+.+.+.}:
>[   29.602474]        [<ffffffff810bf429>] __lock_acquire+0x17f9/0x1c60
>[   29.602483]        [<ffffffff810bfea3>] lock_acquire+0x93/0x180
>[   29.602493]        [<ffffffff817fdedb>] mutex_lock_nested+0x4b/0x380
>[   29.602504]        [<ffffffff811915d6>] revalidate_disk+0x56/0x90
>[   29.602516]        [<ffffffff814fb892>] sd_rescan+0x22/0x40
>[   29.602526]        [<ffffffff814f3906>] scsi_rescan_device+0xb6/0x140
>[   29.602536]        [<ffffffff815113ea>] ata_scsi_dev_rescan+0xca/0x130
>[   29.602546]        [<ffffffff810a25f8>] process_one_work+0x188/0x510
>[   29.602558]        [<ffffffff810a44a9>] worker_thread+0x169/0x340
>[   29.602569]        [<ffffffff810a9216>] kthread+0x96/0xa0
>[   29.602579]        [<ffffffff81038ad4>] kernel_thread_helper+0x4/0x10
>[   29.602591] 
>[   29.602591] other info that might help us debug this:
>[   29.602591] 
>[   29.603876] 3 locks held by kworker/0:1/11:
>[   29.604286]  #0:  (events){+.+.+.}, at: [<ffffffff810a258a>] process_one_work+0x11a/0x510
>[   29.604701]  #1:  ((&ap->scsi_rescan_task)){+.+.+.}, at: [<ffffffff810a258a>] process_one_work+0x11a/0x510
>[   29.605129]  #2:  (&ap->scsi_scan_mutex){+.+.+.}, at: [<ffffffff81511350>] ata_scsi_dev_rescan+0x30/0x130
>[   29.605555] 
>[   29.605555] stack backtrace:
>[   29.606389] Pid: 11, comm: kworker/0:1 Tainted: G        W   2.6.36.2 #1
>[   29.606805] Call Trace:
>[   29.607217]  [<ffffffff810bc6c7>] print_circular_bug+0xe7/0xf0
>[   29.607624]  [<ffffffff810bf429>] __lock_acquire+0x17f9/0x1c60
>[   29.608036]  [<ffffffff810be010>] ? __lock_acquire+0x3e0/0x1c60
>[   29.608452]  [<ffffffff810bfea3>] lock_acquire+0x93/0x180
>[   29.608870]  [<ffffffff811915d6>] ? revalidate_disk+0x56/0x90
>[   29.609284]  [<ffffffff817ffe40>] ? _raw_spin_unlock+0x30/0x60
>[   29.609698]  [<ffffffff811908f0>] ? bdev_test+0x0/0x20
>[   29.610105]  [<ffffffff8107a431>] ? get_parent_ip+0x11/0x50
>[   29.610521]  [<ffffffff811915d6>] ? revalidate_disk+0x56/0x90
>[   29.610928]  [<ffffffff817fdedb>] mutex_lock_nested+0x4b/0x380
>[   29.611339]  [<ffffffff811915d6>] ? revalidate_disk+0x56/0x90
>[   29.611750]  [<ffffffff81384917>] ? kobject_put+0x27/0x60
>[   29.612156]  [<ffffffff81376fa8>] ? disk_get_part+0x18/0xd0
>[   29.612564]  [<ffffffff811915d6>] revalidate_disk+0x56/0x90
>[   29.612970]  [<ffffffff814fb892>] sd_rescan+0x22/0x40
>[   29.613374]  [<ffffffff814f3906>] scsi_rescan_device+0xb6/0x140
>[   29.613774]  [<ffffffff815113ea>] ata_scsi_dev_rescan+0xca/0x130
>[   29.614176]  [<ffffffff810a25f8>] process_one_work+0x188/0x510
>[   29.614579]  [<ffffffff810a258a>] ? process_one_work+0x11a/0x510
>[   29.614980]  [<ffffffff81511320>] ? ata_scsi_dev_rescan+0x0/0x130
>[   29.615386]  [<ffffffff810a44a9>] worker_thread+0x169/0x340
>[   29.615785]  [<ffffffff810a4340>] ? worker_thread+0x0/0x340
>[   29.616186]  [<ffffffff810a9216>] kthread+0x96/0xa0
>[   29.616587]  [<ffffffff81038ad4>] kernel_thread_helper+0x4/0x10
>[   29.616984]  [<ffffffff81075269>] ? finish_task_switch+0x69/0xf0
>[   29.617383]  [<ffffffff81800480>] ? restore_args+0x0/0x30
>[   29.617783]  [<ffffffff810a9180>] ? kthread+0x0/0xa0
>[   29.618178]  [<ffffffff81038ad0>] ? kernel_thread_helper+0x0/0x10
>[   29.622831] ata2.00: configured for UDMA/133
>[   29.622833] ata2: EH complete
>[   29.682864] ata3.00: configured for UDMA/133
>[   29.684945] ata3: EH complete
>[   29.728362] ata4.00: configured for UDMA/133
>[   29.731634] ata4: EH complete
>[   29.820403] ata5.00: configured for UDMA/133
>[   29.820768] ata5: EH complete
>[   29.923916] ata9.00: configured for UDMA/100
>[   29.927981] ata9.01: configured for UDMA/100
>[   29.929160] ata9: EH complete
>[   30.208756] ata9.00: configured for UDMA/100
>[   30.212817] ata9.01: configured for UDMA/100
>[   30.213170] ata9: EH complete
>[   31.330516] EXT4-fs (dm-3): re-mounted. Opts: commit=0
>[   31.335905] EXT4-fs (dm-4): re-mounted. Opts: commit=0
>[   31.338966] EXT4-fs (sdf1): re-mounted. Opts: commit=0
>[   31.587398] EXT4-fs (dm-8): re-mounted. Opts: commit=0
>[   31.590041] EXT4-fs (dm-2): re-mounted. Opts: commit=0
>[   31.592835] EXT4-fs (dm-7): re-mounted. Opts: commit=0
>[   31.595638] EXT4-fs (dm-6): re-mounted. Opts: commit=0
>[   31.598735] EXT4-fs (dm-1): re-mounted. Opts: commit=0
>[   39.951790] eth0: no IPv6 routers present

Actions: View

Attachments on bug 351423: 259607 | 259609