Attachment 258293 Details for Bug 349837 – Full dmesg leading up to a panic

Full dmesg leading up to a panic

x86-panic-via-netconsole.txt (text/plain), 17.51 KB, created by Anthony Basile on 2010-12-29 00:54:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Anthony Basile

Created: 2010-12-29 00:54:34 UTC

Size: 17.51 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Linux version 2.6.32-hardened-r32 (root@hard-thirtytwo) (gcc version 4.4.4 (Gentoo Hardened 4.4.4-r2 p1.2, pie-0.4.5) ) #1 SMP Wed Dec 29 08:26:41 UTC 2010
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   NSC Geode by NSC
>[    0.000000]   Cyrix CyrixInstead
>[    0.000000]   Centaur CentaurHauls
>[    0.000000]   Transmeta GenuineTMx86
>[    0.000000]   Transmeta TransmetaCPU
>[    0.000000]   UMC UMC UMC UMC
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
>[    0.000000]  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
>[    0.000000] DMI 2.4 present.
>[    0.000000] last_pfn = 0x20000 max_arch_pfn = 0x1000000
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] modified physical RAM map:
>[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
>[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
>[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
>[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
>[    0.000000]  modified: 0000000000100000 - 0000000020000000 (usable)
>[    0.000000]  modified: 00000000fc000000 - 0000000100000000 (reserved)
>[    0.000000] init_memory_mapping: 0000000000000000-0000000020000000
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] RAMDISK: 1fea9000 - 1ffef32e
>[    0.000000] ACPI: RSDP 000ea020 00024 (v02    Xen)
>[    0.000000] ACPI: XSDT fc012bb0 0002C (v01    Xen      HVM 00000000 HVML 00000000)
>[    0.000000] ACPI: FACP fc012ab0 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
>[    0.000000] ACPI: DSDT fc002c40 0FDEF (v02    Xen      HVM 00000000 INTL 20100304)
>[    0.000000] ACPI: FACS fc002c00 00040
>[    0.000000] 0MB HIGHMEM available.
>[    0.000000] 512MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 20000000
>[    0.000000]   low ram: 0 - 20000000
>[    0.000000]   node 0 low ram: 00000000 - 20000000
>[    0.000000]   node 0 bootmap 00101000 - 00105000
>[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0020000000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>[    0.000000]   #3 [0001000000 - 0001ce600c]    TEXT DATA BSS ==> [0001000000 - 0001ce600c]
>[    0.000000]   #4 [001fea9000 - 001ffef32e]          RAMDISK ==> [001fea9000 - 001ffef32e]
>[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>[    0.000000]   #6 [0001ce7000 - 0001cf80a9]              BRK ==> [0001ce7000 - 0001cf80a9]
>[    0.000000]   #7 [0000100000 - 0000101000]          PGTABLE ==> [0000100000 - 0000101000]
>[    0.000000]   #8 [0000101000 - 0000105000]          BOOTMAP ==> [0000101000 - 0000105000]
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x00020000
>[    0.000000]   HighMem  0x00020000 -> 0x00020000
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[3] active PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x00000002
>[    0.000000]     0: 0x00000006 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x00020000
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x1f48
>[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
>[    0.000000] Found and enabled local APIC!
>[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dc000000)
>[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 10 pages/cpu @c2200000 s17944 r0 d23016 u2097152
>[    0.000000] pcpu-alloc: s17944 r0 d23016 u2097152 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129947
>[    0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/sda3 netconsole=6969@192.168.100.193/eth0,6969@192.168.100.7/00:1B:21:44:26:69
>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
>[    0.000000] Memory: 504412k/524288k available (8192k kernel code, 19160k reserved, 261k data, 332k init, 0k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
>[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
>[    0.000000]     vmalloc : 0xe0800000 - 0xff9fe000   ( 497 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
>[    0.000000]       .init : 0xc1c00000 - 0xc1c53000   ( 332 kB)
>[    0.000000]       .data : 0xc1a00000 - 0xc1a415d8   ( 261 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc1800000   (8192 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS:2304 nr_irqs:256
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 2672.986 MHz processor.
>[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.97 BogoMIPS (lpj=2672986)
>[    0.022008] Security Framework initialized
>[    0.023002] SELinux:  Initializing.
>[    0.024010] Mount-cache hash table entries: 512
>[    0.025081] Initializing cgroup subsys ns
>[    0.026003] Initializing cgroup subsys cpuacct
>[    0.027003] Initializing cgroup subsys freezer
>[    0.028045] CPU: L1 I cache: 32K, L1 D cache: 32K
>[    0.029001] CPU: L2 cache: 256K
>[    0.029999] CPU: L3 cache: 8192K
>[    0.031005] CPU: Unsupported number of siblings 32
>[    0.031558] mce: CPU supports 9 MCE banks
>[    0.033050] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
>[    0.035002] Checking 'hlt' instruction... OK.
>[    0.045250] SMP alternatives: switching to UP code
>[    0.070169] Freeing SMP alternatives: 28k freed
>[    0.070999] ACPI: Core revision 20090903
>[    0.079262] ACPI: setting ELCR to 0200 (from 0c20)
>[    0.079871] Enabling APIC mode:  Flat.  Using 0 I/O APICs
>[    0.079999] weird, boot CPU (#0) not listed by the BIOS.
>[    0.080994] SMP motherboard not detected.
>[    0.081987] SMP disabled
>[    0.081987] Brought up 1 CPUs
>[    0.081987] Total of 1 processors activated (5345.97 BogoMIPS).
>[    0.082369] Time:  8:36:11  Date: 12/29/10
>[    0.083023] NET: Registered protocol family 16
>[    0.084285] ACPI: bus type pci registered
>[    0.103785] bios32_service: base:000f0000 length:00000000 entry:0000b5d0
>[    0.103985] bios32_service: not valid
>[    0.104504] PCI: Using configuration type 1 for base access
>[    0.107927] bio: create slab <bio-0> at 0
>[    0.163529] ACPI: Interpreter enabled
>[    0.163976] ACPI: (supports S0 S5)
>[    0.164977] ACPI: Using PIC for interrupt routing
>[    0.271396] ACPI: No dock devices found.
>[    0.272109] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.275154] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>[    0.275155] * this clock source is slow. Consider trying other clock sources
>[    0.277253] pci 0000:00:01.3: quirk: region 1f40-1f7f claimed by PIIX4 ACPI
>[    0.640916] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
>[    0.643191] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>[    0.645456] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>[    0.647571] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
>[    0.649505] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.650010] vgaarb: loaded
>[    0.651223] SCSI subsystem initialized
>[    0.652315] PCI: Using ACPI for IRQ routing
>[    0.653283] NetLabel: Initializing
>[    0.653799] NetLabel:  domain hash size = 128
>[    0.654019] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.654581] NetLabel:  unlabeled traffic allowed by default
>[    0.655007] Switching to clocksource tsc
>[    0.656054] pnp: PnP ACPI init
>[    0.656561] ACPI: bus type pnp registered
>[    0.706172] pnp: PnP ACPI: found 12 devices
>[    0.706705] ACPI: ACPI bus type pnp unregistered
>[    0.707263] system 00:00: iomem range 0x0-0x9ffff could not be reserved
>[    0.707852] system 00:02: ioport range 0x10c0-0x1141 has been reserved
>[    0.708452] system 00:02: ioport range 0xb044-0xb047 has been reserved
>[    0.709037] system 00:03: ioport range 0x8a0-0x8a3 has been reserved
>[    0.709619] system 00:03: ioport range 0xcc0-0xccf has been reserved
>[    0.710202] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
>[    0.746059] NET: Registered protocol family 2
>[    0.746620] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.747287] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.748128] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.748738] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.749329] TCP reno registered
>[    0.749943] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>[    0.750543] pci 0000:00:01.0: PIIX3: Enabling Passive Release
>[    0.751137] pci 0000:00:01.0: Activating ISA DMA hang workarounds
>[    0.751768] Trying to unpack rootfs image as initramfs...
>[    0.776832] Freeing initrd memory: 1304k freed
>[    0.778019] Scanning for low memory corruption every 60 seconds
>[    0.778781] audit: initializing netlink socket (disabled)
>[    0.779395] type=2000 audit(1293611771.779:1): initialized
>[    0.779963] kretprobe: lookup failed: __switch_to
>[    0.780563] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.781222] VFS: Disk quotas dquot_6.5.2
>[    0.781748] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.782701] JFS: nTxBlock = 3953, nTxLock = 31628
>[    0.783674] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>[    0.784652] msgmni has been set to 988
>[    0.785406] alg: No test for stdrng (krng)
>[    0.785991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.786808] io scheduler noop registered
>[    0.787343] io scheduler anticipatory registered
>[    0.787881] io scheduler deadline registered
>[    0.788410] io scheduler cfq registered (default)
>[    0.789548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>[    0.790380] ACPI: Power Button [PWRF]
>[    0.790996] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
>[    0.791819] ACPI: Sleep Button [SLPF]
>[    0.796733] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.041161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.043977] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.049984] brd: module loaded
>[    1.053202] loop: module loaded
>[    1.056056] scsi0 : ata_piix
>[    1.057112] scsi1 : ata_piix
>[    1.058160] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc140 irq 14
>[    1.059229] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc148 irq 15
>[    1.062407] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
>[    1.063431] Copyright (c) 1999-2006 Intel Corporation.
>[    1.065447] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
>[    1.066418] e1000 0000:00:04.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
>[    1.549001] e1000: 0000:00:04.0: e1000_probe: (PCI:33MHz:32-bit) 00:16:3e:18:3e:96
>[    1.556827] ata2.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
>[    1.557802] ata2.00: 20971520 sectors, multi 16: LBA48 
>[    1.558783] ata2.01: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
>[    1.559769] ata2.01: 20971520 sectors, multi 16: LBA48 
>[    1.561518] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
>[    1.562499] ata1.00: 41943040 sectors, multi 16: LBA48 
>[    1.563516] ata1.01: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
>[    1.564502] ata1.01: 20971520 sectors, multi 16: LBA48 
>[    1.568189] ata2.00: configured for MWDMA2
>[    1.569742] ata1.00: configured for MWDMA2
>[    1.572718] ata2.01: configured for MWDMA2
>[    1.573719] ata1.01: configured for MWDMA2
>[    1.574721] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.10 PQ: 0 ANSI: 5
>[    1.576987] sd 0:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
>[    1.578463] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.579767] sd 0:0:0:0: [sda] Write Protect is off
>[    1.580893] scsi 0:0:1:0: Direct-Access     ATA      QEMU HARDDISK    0.10 PQ: 0 ANSI: 5
>[    1.582398] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[    1.584580]  sda: sda1 sda2 sda3
>[    1.588260] sd 0:0:1:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
>[    1.590205] sd 0:0:1:0: [sdb] Write Protect is off
>[    1.591337] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[    1.592991] sd 0:0:1:0: Attached scsi generic sg1 type 0
>[    1.594383]  sdb:
>[    1.595608] scsi 1:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.10 PQ: 0 ANSI: 5
>[    1.597782]  sdb1
>[    1.599676] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.601108] sd 1:0:0:0: [sdc] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
>[    1.602612] sd 1:0:0:0: [sdc] Write Protect is off
>[    1.603610] sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[    1.605384] sd 0:0:1:0: [sdb] Attached SCSI disk
>[    1.606424]  sdc: unknown partition table
>[    1.608421] sd 1:0:0:0: Attached scsi generic sg2 type 0
>[    1.609809] scsi 1:0:1:0: Direct-Access     ATA      QEMU HARDDISK    0.10 PQ: 0 ANSI: 5
>[    1.611772] sd 1:0:0:0: [sdc] Attached SCSI disk
>[    1.613218] sd 1:0:1:0: [sdd] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
>[    1.616336] sd 1:0:1:0: [sdd] Write Protect is off
>[    1.617462] sd 1:0:1:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[    1.619142] sd 1:0:1:0: Attached scsi generic sg3 type 0
>[    1.620735]  sdd: unknown partition table
>[    1.623144] sd 1:0:1:0: [sdd] Attached SCSI disk
>[    1.658876] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>[    1.660091] netconsole: local port 6969
>[    1.660962] netconsole: local IP 192.168.100.193
>[    1.661874] netconsole: interface eth0
>[    1.662749] netconsole: remote port 6969
>[    1.663646] netconsole: remote IP 192.168.100.7
>[    1.664585] netconsole: remote ethernet address 00:1b:21:44:26:69
>[    1.665562] netconsole: device eth0 not up yet, forcing it
>[    1.676980] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
>[    1.683575] netconsole: carrier detect appears untrustworthy, waiting 4 seconds
>[    5.958295] console [netcon0] enabled
>[    5.959340] netconsole: network logging started
>[    5.960413] Fusion MPT base driver 3.04.12
>[    5.961463] Copyright (c) 1999-2008 LSI Corporation
>[    5.962558] Fusion MPT SAS Host driver 3.04.12
>[    5.964334] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    5.967935] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    5.969068] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    5.970687] mice: PS/2 mouse device common for all mice
>[    5.973237] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    5.974479] rtc0: alarms up to one day, 114 bytes nvram
>[    5.975655] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>[    5.977815] cpuidle: using governor ladder
>[    5.978964] cpuidle: using governor menu
>[    5.980028] Netfilter messages via NETLINK v0.30.
>[    5.981244] TCP cubic registered
>[    5.982317] Using IPI No-Shortcut mode
>[    5.984559] registered taskstats version 1
>[    5.986370]   Magic number: 6:644:625
>[    5.987494] rtc_cmos 00:05: setting system clock to 2010-12-29 08:36:17 UTC (1293611777)
>[    5.989442] Freeing unused kernel memory: 332k freed
>[    6.000785] grsec: mount of proc to /proc by /bin/busybox[mount:478] uid/euid:0/0 gid/egid:0/0, parent /init[init:1] uid/euid:0/0 gid/egid:0/0
>[   10.950267] PAX: kernel memory leak attempt detected from df90cfa8 (6 bytes)
>[   10.952264] Pid: 1, comm: switch_root Not tainted 2.6.32-hardened-r32 #1
>[   10.953466] Call Trace:
>[   10.954472]  [<000965e5>] ? pax_report_leak_to_user+0x48/0x52
>[   10.955620]  [<0009effa>] ? filldir64+0x1a2/0x208
>[   10.956729]  [<000041ed>] ? per_cpu__runqueues+0xad/0x240
>[   10.957862]  [<000a9414>] ? dcache_readdir+0x134/0x189
>[   10.959023]  [<0009ee58>] ? filldir64+0x0/0x208
>[   10.960128]  [<0009e81a>] ? vfs_readdir+0x62/0x8c
>[   10.961229]  [<0009ee58>] ? filldir64+0x0/0x208
>[   10.962321]  [<0009e90d>] ? sys_getdents64+0xc9/0x133
>[   10.963435]  [<00003d86>] ? syscall_call+0x7/0xb
>[   10.964588] Kernel panic - not syncing: Attempted to kill init!

Actions: View

Attachments on bug 349837: 258293