build.log

build.log (text/plain), 9.43 KB, created by Markos Chandras (RETIRED) on 2010-11-04 12:32:42 UTC

 [32;01m*[0m CPV:  dev-perl/crypt-dsa-1.16
 [32;01m*[0m REPO: gentoo
 [32;01m*[0m USE:  amd64 elibc_glibc kernel_linux multilib test userland_GNU
>>> Unpacking source...
>>> Unpacking Crypt-DSA-1.16.tar.gz to /var/tmp/portage/dev-perl/crypt-dsa-1.16/work
>>> Source unpacked in /var/tmp/portage/dev-perl/crypt-dsa-1.16/work
>>> Preparing source in /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16 ...
 [32;01m*[0m Applying crypt-dsa-1.16-dsaparam.patch ...
[A[123C  [34;01m[ [32;01mok[34;01m ][0m
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16 ...
 [32;01m*[0m Using ExtUtils::MakeMaker
 [32;01m*[0m perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor INSTALLMAN3DIR=none DESTDIR=/var/tmp/portage/dev-perl/crypt-dsa-1.16/image/
Checking if your kit is complete...
Looks good
Warning: prerequisite Digest::SHA1 0 not found.
Writing Makefile for Crypt::DSA
>>> Source configured.
>>> Compiling source in /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16 ...
make -j7 'OTHERLDFLAGS=-Wl,-O1 -Wl,--hash-style=gnu,--enable-new-dtags -Wl,--as-needed' 
cp lib/Crypt/DSA/Signature.pm blib/lib/Crypt/DSA/Signature.pm
cp lib/Crypt/DSA/Key/SSH2.pm blib/lib/Crypt/DSA/Key/SSH2.pm
cp lib/Crypt/DSA.pm blib/lib/Crypt/DSA.pm
cp lib/Crypt/DSA/Util.pm blib/lib/Crypt/DSA/Util.pm
cp lib/Crypt/DSA/KeyChain.pm blib/lib/Crypt/DSA/KeyChain.pm
cp lib/Crypt/DSA/Key.pm blib/lib/Crypt/DSA/Key.pm
cp lib/Crypt/DSA/Key/PEM.pm blib/lib/Crypt/DSA/Key/PEM.pm
>>> Source compiled.
make -j7 test TEST_VERBOSE=0 
PERL_DL_NONLAZY=1 /usr/bin/perl5.12.2 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t .. 
t/00-compile.t .. 1/1 
#   Failed test 'use Crypt::DSA;'
#   at t/00-compile.t line 10.
#     Tried to use 'Crypt::DSA'.
#     Error:  Can't locate Digest/SHA1.pm in @INC (@INC contains: /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/inc /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/arch /usr/lib64/perl5/site_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.12.2 /usr/lib64/perl5/vendor_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/vendor_perl/5.12.2 /usr/lib64/perl5/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/5.12.2 /usr/lib64/perl5/site_perl /usr/lib64/perl5/vendor_perl .) at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
# BEGIN failed--compilation aborted at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Use of uninitialized value $Crypt::DSA::VERSION in concatenation (.) or string at t/00-compile.t line 12.
# Testing Crypt::DSA 
# Looks like you failed 1 test of 1.

                       
t/00-compile.t .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests 
t/01-util.t ..... 
t/01-util.t ..... 1/13 
                         
t/01-util.t ..... ok
t/02-sign.t ..... Can't locate Digest/SHA1.pm in @INC (@INC contains: /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/inc /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/arch /usr/lib64/perl5/site_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.12.2 /usr/lib64/perl5/vendor_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/vendor_perl/5.12.2 /usr/lib64/perl5/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/5.12.2 /usr/lib64/perl5/site_perl /usr/lib64/perl5/vendor_perl .) at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
BEGIN failed--compilation aborted at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
Compilation failed in require at t/02-sign.t line 9.
BEGIN failed--compilation aborted at t/02-sign.t line 9.

                    
t/02-sign.t ..... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run 
t/03-keygen.t ... Can't locate Digest/SHA1.pm in @INC (@INC contains: /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/inc /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/arch /usr/lib64/perl5/site_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.12.2 /usr/lib64/perl5/vendor_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/vendor_perl/5.12.2 /usr/lib64/perl5/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/5.12.2 /usr/lib64/perl5/site_perl /usr/lib64/perl5/vendor_perl .) at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
BEGIN failed--compilation aborted at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
Compilation failed in require at t/03-keygen.t line 19.
BEGIN failed--compilation aborted at t/03-keygen.t line 19.
# Looks like your test exited with 2 before it could output anything.

                        
t/03-keygen.t ... Dubious, test returned 2 (wstat 512, 0x200)
Failed 18/18 subtests 
t/04-pem.t ...... 
                       
t/04-pem.t ...... skipped: no Crypt::DES_EDE3
t/06-fips.t ..... Can't locate Digest/SHA1.pm in @INC (@INC contains: /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/inc /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/arch /usr/lib64/perl5/site_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.12.2 /usr/lib64/perl5/vendor_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/vendor_perl/5.12.2 /usr/lib64/perl5/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/5.12.2 /usr/lib64/perl5/site_perl /usr/lib64/perl5/vendor_perl .) at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
BEGIN failed--compilation aborted at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
Compilation failed in require at t/06-fips.t line 9.
BEGIN failed--compilation aborted at t/06-fips.t line 9.

                    
t/06-fips.t ..... Dubious, test returned 2 (wstat 512, 0x200)
No subtests run 
t/07-openid.t ... Can't locate Digest/SHA1.pm in @INC (@INC contains: /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/inc /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/arch /usr/lib64/perl5/site_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/site_perl/5.12.2 /usr/lib64/perl5/vendor_perl/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/vendor_perl/5.12.2 /usr/lib64/perl5/5.12.2/x86_64-linux-thread-multi /usr/lib64/perl5/5.12.2 /usr/lib64/perl5/site_perl /usr/lib64/perl5/vendor_perl .) at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
BEGIN failed--compilation aborted at /var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16/blib/lib/Crypt/DSA.pm line 5.
Compilation failed in require at t/07-openid.t line 17.
BEGIN failed--compilation aborted at t/07-openid.t line 17.
# Looks like your test exited with 2 before it could output anything.

                        
t/07-openid.t ... Dubious, test returned 2 (wstat 512, 0x200)
Failed 11/11 subtests 
t/97_meta.t ..... 
                       
t/97_meta.t ..... skipped: Author tests not required for installation
t/98_pod.t ...... 
                       
t/98_pod.t ...... skipped: Author tests not required for installation
t/99_pmv.t ...... 
                       
t/99_pmv.t ...... skipped: Author tests not required for installation

Test Summary Report
-------------------
t/00-compile.t (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
t/02-sign.t   (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
t/03-keygen.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 18 tests but ran 0.
t/06-fips.t   (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
t/07-openid.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 11 tests but ran 0.
Files=10, Tests=14,  0 wallclock secs ( 0.06 usr  0.02 sys +  0.30 cusr  0.01 csys =  0.39 CPU)
Result: FAIL
Failed 5/10 test programs. 1/14 subtests failed.
make: *** [test_dynamic] Error 255
 [31;01m*[0m ERROR: dev-perl/crypt-dsa-1.16 failed:
 [31;01m*[0m   test failed
 [31;01m*[0m 
 [31;01m*[0m Call stack:
 [31;01m*[0m     ebuild.sh, line   54:  Called src_test
 [31;01m*[0m   environment, line 2724:  Called perl-module_src_test
 [31;01m*[0m   environment, line 2449:  Called die
 [31;01m*[0m The specific snippet of code:
 [31;01m*[0m                   emake test TEST_VERBOSE=${TEST_VERBOSE:-0} || die "test failed";
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the output of 'emerge --info =dev-perl/crypt-dsa-1.16',
 [31;01m*[0m the complete build log and the output of 'emerge -pqv =dev-perl/crypt-dsa-1.16'.
 [31;01m*[0m The complete build log is located at '/var/tmp/portage/dev-perl/crypt-dsa-1.16/temp/build.log'.
 [31;01m*[0m The ebuild environment file is located at '/var/tmp/portage/dev-perl/crypt-dsa-1.16/temp/environment'.
 [31;01m*[0m S: '/var/tmp/portage/dev-perl/crypt-dsa-1.16/work/Crypt-DSA-1.16'