Go to:
Gentoo Home
Documentation
Forums
Lists
Bugs
Planet
Store
Wiki
Get Gentoo!
Gentoo's Bugzilla – Attachment 243425 Details for
Bug 333257
networkmanager-0.8.1-r3 failure with nm-system-settings.conf
Home
|
New
–
[Ex]
|
Browse
|
Search
|
Privacy Policy
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
/etc/conf.d/net
net (text/plain), 3.60 KB, created by
I am
on 2010-08-18 11:08:26 UTC
(
hide
)
Description:
/etc/conf.d/net
Filename:
MIME Type:
Creator:
I am
Created:
2010-08-18 11:08:26 UTC
Size:
3.60 KB
patch
obsolete
> ># This blank configuration will automatically use DHCP for any net.* ># scripts in /etc/init.d. To create a more complete configuration, ># please review /etc/conf.d/net.example and save your configuration ># in /etc/conf.d/net (this file :]!). >#dhcpcd_eth0="-t 10" >#ifplugd_eth0="" > >modules_wlan0=( "!netplug" ) >modules=( "wpa_supplicant" ) >wpa_supplicant_wlan0="-Dwext" >#iwconfig_wlan0="power on" > >config_ppp0=( "ppp" ) >link_ppp0="/dev/ttyACM0" >username_ppp0='ppp@a1plus.net' >password_ppp0='ppp' > >pppd_ppp0=( ># "maxfail 0" # WARNING: It's not recommended you use this ># # if you don't specify maxfail then we assume 0 ># "updetach" # If not set, "/etc/init.d/net.ppp0 start" will return ># # immediately, without waiting the link to come up ># # for the first time. ># # Do not use it for dial-on-demand links! ># "debug" # Enables syslog debugging > "noauth" # Do not require the peer to authenticate itself > "defaultroute" # Make this PPP interface the default route > "usepeerdns" # Use the DNS settings provided by PPP ># ># On demand options > "demand" # Enable dial on demand ># "idle 30" # Link goes down after 30 seconds of inactivity ># "10.112.112.112:10.112.112.113" # Phony IP addresses ># "ipcp-accept-remote" # Accept the peers idea of remote address ># "ipcp-accept-local" # Accept the peers idea of local address ># "holdoff 3" # Wait 3 seconds after link dies before re-starting ># ># Dead peer detection > "lcp-echo-interval 15" # Send a LCP echo every 15 seconds > "lcp-echo-failure 3" # Make peer dead after 3 consective ># # echo-requests ># ># Compression options - use these to completely disable compression ># noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp ># ># Dial-up settings ># "lock" # Lock serial port > "460800" # Set the serial port baud rate > "modem crtscts" # Enable hardware flow control ># "192.168.0.1:192.168.0.2" # Local and remote IP addresses >) >phone_number_ppp0=( "99***1#" ) > > config_ppp1=( "ppp" ) > pppd_ppp1=( > "persist" > "call mmc.vpn" > "holdoff 10" > "mru 1460" > "mtu 1460" > "idle 600" > ) > link_ppp1="pty \"pptp mmc.vpn --nolaunchpppd\"" > >#This postup script is run after every network interface comes up > postup(){ > if [[ ${IFACE} = ppp1 ]]; then > route add -net 10.0.0.0 netmask 255.255.255.255 dev ppp1 > fi > return 0; > } >
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 333257
: 243425