dmesg output from 2.6.34-rc7

dmesg2.txt (text/plain), 26.28 KB, created by skaumo on 2010-05-12 07:39:27 UTC

Linux version 2.6.34-rc7 (root@TB) (gcc version 4.4.3 (Gentoo 4.4.3 p1.0) ) #1 PREEMPT Tue May 11 23:24:28 CEST 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002dee0000 (usable)
 BIOS-e820: 000000002dee0000 - 000000002deeb000 (ACPI data)
 BIOS-e820: 000000002deeb000 - 000000002df00000 (ACPI NVS)
 BIOS-e820: 000000002df00000 - 0000000030000000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x2dee0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 base 020000000 mask FF0000000 write-back
  2 base 02FF00000 mask FFFF00000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000002dee0000
 0000000000 - 0000400000 page 4k
 0000400000 - 002dc00000 page 2M
 002dc00000 - 002dee0000 page 4k
kernel direct mapping tables up to 2dee0000 @ 14000-19000
ACPI: RSDP 000f7540 00014 (v00 PTLTD )
ACPI: RSDT 2dee7d20 00034 (v01 PTLTD  Montara  06040000  LTP 00000000)
ACPI: FACP 2deeaddd 00074 (v01 INTEL  MONTARAG 06040000 PTL  00000050)
ACPI: DSDT 2dee7d54 03089 (v01 INTEL  MONTARAG 06040000 MSFT 0100000E)
ACPI: FACS 2defbfc0 00040
ACPI: BOOT 2deeae51 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
ACPI: SSDT 2deeae79 000BC (v01 PTLTD  ACPICST1 06040000  LTP 00000001)
ACPI: SSDT 2deeaf35 000CB (v01 PTLTD  ACPIPST1 06040000  LTP 00000001)
734MB LOWMEM available.
  mapped low ram: 0 - 2dee0000
  low ram: 0 - 2dee0000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0002dee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0002dee0
On node 0 totalpages: 188015
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1438 pages used for memmap
  Normal zone: 182594 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
early_res array is doubled to 64 at [15000 - 157ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 30000000:cf800000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 186545
Kernel command line: root=/dev/hda3 real_rootfs=ext4 vga=0x318 video=intelfb:ywrap,mtrr:4,1024x768-32@60,splash=verbose,theme:emergence verbose
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (38 early reservations)
  #1 [0001000000 - 00015027c0]   TEXT DATA BSS
  #2 [000009f800 - 0000100000]   BIOS reserved
  #3 [0001503000 - 0001509124]             BRK
  #4 [0000010000 - 0000014000]     ACPI WAKEUP
  #5 [0000014000 - 0000015000]         PGTABLE
  #6 [00015028c0 - 0001502920]         BOOTMEM
  #7 [000150a000 - 000158a000]         BOOTMEM
  #8 [000158a000 - 000160a000]         BOOTMEM
  #9 [000160a000 - 000168a000]         BOOTMEM
  #10 [000168a000 - 000170a000]         BOOTMEM
  #11 [000170a000 - 000178a000]         BOOTMEM
  #12 [000178a000 - 000180a000]         BOOTMEM
  #13 [000180a000 - 000188a000]         BOOTMEM
  #14 [000188a000 - 000190a000]         BOOTMEM
  #15 [000190a000 - 000198a000]         BOOTMEM
  #16 [000198a000 - 0001a0a000]         BOOTMEM
  #17 [0001a0a000 - 0001a8a000]         BOOTMEM
  #18 [0001a8a000 - 0001b0a000]         BOOTMEM
  #19 [00015027c0 - 0001502840]         BOOTMEM
  #20 [0001b0a000 - 0001b0c000]         BOOTMEM
  #21 [0001502940 - 0001502a74]         BOOTMEM
  #22 [0001502840 - 0001502880]         BOOTMEM
  #23 [0001502880 - 00015028c0]         BOOTMEM
  #24 [0001502a80 - 0001502ac0]         BOOTMEM
  #25 [0001502ac0 - 0001502b00]         BOOTMEM
  #26 [0001502b00 - 0001502b40]         BOOTMEM
  #27 [0001502b40 - 0001502b80]         BOOTMEM
  #28 [0001502b80 - 0001502bc0]         BOOTMEM
  #29 [0001502bc0 - 0001502c00]         BOOTMEM
  #30 [0001502c00 - 0001502c40]         BOOTMEM
  #31 [0001502c40 - 0001502c80]         BOOTMEM
  #32 [0001502c80 - 0001502c90]         BOOTMEM
  #33 [0001502cc0 - 0001502d3b]         BOOTMEM
  #34 [0001502d40 - 0001502dbb]         BOOTMEM
  #35 [0001b0c000 - 0001b10000]         BOOTMEM
  #36 [0001b10000 - 0001b90000]         BOOTMEM
  #37 [0001b90000 - 0001bd0000]         BOOTMEM
Memory: 739944k/752512k available (3045k kernel code, 12116k reserved, 1341k data, 320k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa4000 - 0xfffff000   ( 364 kB)
    vmalloc : 0xee6e0000 - 0xfffa2000   ( 280 MB)
    lowmem  : 0xc0000000 - 0xedee0000   ( 734 MB)
      .init : 0xc1449000 - 0xc1499000   ( 320 kB)
      .data : 0xc12f9432 - 0xc1448838   (1341 kB)
      .text : 0xc1000000 - 0xc12f9432   (3045 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 897.244 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 1795.25 BogoMIPS (lpj=2990813)
Mount-cache hash table entries: 512
Initializing cgroup subsys blkio
mce: CPU supports 5 MCE banks
Performance Events: 
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
CPU: Intel(R) Pentium(R) M processor  900MHz stepping 05
Checking 'hlt' instruction... OK.
ACPI: Core revision 20100121
ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x02E6 (20100121/psloop-526)
ACPI: setting ELCR to 0200 (from 0ca0)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9b2, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xfebfffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xefffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xe0000000-0xe007ffff]
pci 0000:00:02.0: reg 18: [io  0x1800-0x1807]
pci 0000:00:02.0: supports D1
pci 0000:00:02.1: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:00:02.1: reg 14: [mem 0xe0080000-0xe00fffff]
pci 0000:00:02.1: supports D1
pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
pci 0000:00:1d.7: reg 10: [mem 0xe0100000-0xe01003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.3: reg 20: [io  0x1860-0x187f]
pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14: [io  0x1880-0x18bf]
pci 0000:00:1f.5: reg 18: [mem 0xe0100c00-0xe0100dff]
pci 0000:00:1f.5: reg 1c: [mem 0xe0100800-0xe01008ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:00:1f.6: reg 10: [io  0x2400-0x24ff]
pci 0000:00:1f.6: reg 14: [io  0x2000-0x207f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
pci 0000:02:06.0: reg 10: [mem 0xe0200000-0xe0200fff]
pci 0000:02:08.0: reg 10: [mem 0xe0201000-0xe0201fff]
pci 0000:02:08.0: reg 14: [io  0x3000-0x303f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:02:09.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:09.0: supports D1 D2
pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:09.0: PME# disabled
pci 0000:02:09.1: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:09.1: supports D1 D2
pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:09.1: PME# disabled
pci 0000:02:09.2: reg 10: [mem 0xe0202000-0xe02027ff]
pci 0000:02:09.2: PME# supported from D0 D3hot D3cold
pci 0000:02:09.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:02 [bus 02-02]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff 
reserve RAM buffer: 000000002dee0000 - 000000002fffffff 
Switching to clocksource tsc
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:04: [io  0x0600-0x060f] has been reserved
system 00:04: [io  0x0700-0x070f] has been reserved
system 00:04: [io  0x0800-0x0807] has been reserved
system 00:04: [io  0x1000-0x107f] has been reserved
system 00:04: [io  0x1180-0x11bf] has been reserved
system 00:04: [io  0x0291-0x0293] has been reserved
system 00:04: [io  0x03f0-0x03f7] could not be reserved
system 00:04: [mem 0xfec10000-0xfec1ffff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1e.0: BAR 9: assigned [mem 0x30000000-0x37ffffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0x38000000-0x380003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x38000000-0x380003ff] (PCI address [0x38000000-0x380003ff]
pci 0000:02:09.0: BAR 9: assigned [mem 0x30000000-0x33ffffff pref]
pci 0000:02:09.0: BAR 10: assigned [mem 0x3c000000-0x3fffffff]
pci 0000:02:09.1: BAR 9: assigned [mem 0x34000000-0x37ffffff pref]
pci 0000:02:09.1: BAR 10: assigned [mem 0x40000000-0x43ffffff]
pci 0000:02:09.0: BAR 0: assigned [mem 0xe0203000-0xe0203fff]
pci 0000:02:09.0: BAR 0: set to [mem 0xe0203000-0xe0203fff] (PCI address [0xe0203000-0xe0203fff]
pci 0000:02:09.1: BAR 0: assigned [mem 0xe0204000-0xe0204fff]
pci 0000:02:09.1: BAR 0: set to [mem 0xe0204000-0xe0204fff] (PCI address [0xe0204000-0xe0204fff]
pci 0000:02:09.0: BAR 7: assigned [io  0x3400-0x34ff]
pci 0000:02:09.0: BAR 8: assigned [io  0x3800-0x38ff]
pci 0000:02:09.1: BAR 7: assigned [io  0x3c00-0x3cff]
pci 0000:02:09.1: BAR 8: assigned [io  0x1400-0x14ff]
pci 0000:02:09.0: CardBus bridge to [bus 03-06]
pci 0000:02:09.0:   bridge window [io  0x3400-0x34ff]
pci 0000:02:09.0:   bridge window [io  0x3800-0x38ff]
pci 0000:02:09.0:   bridge window [mem 0x30000000-0x33ffffff pref]
pci 0000:02:09.0:   bridge window [mem 0x3c000000-0x3fffffff]
pci 0000:02:09.1: CardBus bridge to [bus 07-0a]
pci 0000:02:09.1:   bridge window [io  0x3c00-0x3cff]
pci 0000:02:09.1:   bridge window [io  0x1400-0x14ff]
pci 0000:02:09.1:   bridge window [mem 0x34000000-0x37ffffff pref]
pci 0000:02:09.1:   bridge window [mem 0x40000000-0x43ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1e.0:   bridge window [mem 0xe0200000-0xe02fffff]
pci 0000:00:1e.0:   bridge window [mem 0x30000000-0x37ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:09.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:02:09.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:02:09.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
pci 0000:02:09.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
pci 0000:02:09.1: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xe0200000-0xe02fffff]
pci_bus 0000:02: resource 2 [mem 0x30000000-0x37ffffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0x3400-0x34ff]
pci_bus 0000:03: resource 1 [io  0x3800-0x38ff]
pci_bus 0000:03: resource 2 [mem 0x30000000-0x33ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x3c000000-0x3fffffff]
pci_bus 0000:07: resource 0 [io  0x3c00-0x3cff]
pci_bus 0000:07: resource 1 [io  0x1400-0x14ff]
pci_bus 0000:07: resource 2 [mem 0x34000000-0x37ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x40000000-0x43ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
PCI: CLS 32 bytes, default 64
Simple Boot Flag at 0x35 set to 0x80
DLM (built May 11 2010 23:07:28) installed
Installing knfsd (copyright (C) 1996 [e-mail]).
fuse init (API version 7.13)
msgmni has been set to 1445
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
acpi device:04: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2
ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
Marking TSC unstable due to TSC halts in idle
Switching to clocksource acpi_pm
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (45 C)
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 32636K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 31M of stolen space
[drm] initialized overlay support
ACPI: Battery Slot [BAT0] (battery present)
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
pci 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
pci 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817
Probing IDE interface ide0...
hda: TOSHIBA MK6021GAS, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB), CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2 hda3
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xe0201000, irq 10, MAC addr 00:80:3f:05:a6:8b
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 7, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
SCTP: Hash tables configured (established 65536 bind 65536)
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
EXT4-fs (hda3): mounted filesystem with ordered data mode
VFS: Mounted root (ext2 filesystem) readonly on device 3:3.
Freeing unused kernel memory: 320k freed
usb 2-1: new low speed USB device using uhci_hcd and address 2
input: Silitek USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
generic-usb 0003:047B:0006.0001: input: USB HID v1.00 Keyboard [Silitek USB Keyboard] on usb-0000:00:1d.0-1/input0
usb 3-2: new full speed USB device using uhci_hcd and address 2
udev: starting version 151
rtc_cmos: dev (254:0)
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram
cfg80211: Calling CRDA to update world regulatory domain
firewire_ohci 0000:02:09.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x0
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
yenta_cardbus 0000:02:09.0: CardBus bridge found [15d5:0757]
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
udev: renamed network interface eth0 to lan
yenta_cardbus 0000:02:09.0: ISA IRQ mask 0x0008, PCI irq 10
yenta_cardbus 0000:02:09.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe02fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
yenta_cardbus 0000:02:09.0: pcmcia: parent PCI bridge window: [mem 0x30000000-0x37ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x30000000-0x37ffffff: excluding 0x30000000-0x37ffffff
yenta_cardbus 0000:02:09.1: CardBus bridge found [15d5:0757]
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
firewire_core: created device fw0: GUID 0000803f00059a27, S400
yenta_cardbus 0000:02:09.1: ISA IRQ mask 0x0008, PCI irq 5
yenta_cardbus 0000:02:09.1: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a
yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge window: [mem 0xe0200000-0xe02fffff]
pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
yenta_cardbus 0000:02:09.1: pcmcia: parent PCI bridge window: [mem 0x30000000-0x37ffffff pref]
pcmcia_socket pcmcia_socket1: cs: memory probe 0x30000000-0x37ffffff: excluding 0x30000000-0x37ffffff
ipw2100 0000:02:06.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
intel8x0_measure_ac97_clock: measured 52510 usecs (2531 samples)
intel8x0: clocking to 48000
udev: renamed network interface eth0 to wl
e100: lan NIC Link is Up 100 Mbps Half Duplex
Bridge firewalling registered
e100: lan NIC Link is Up 100 Mbps Half Duplex
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
render error detected, EIR: 0x00000000
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 54 at 53)
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
render error detected, EIR: 0x00000000
usb 2-1: USB disconnect, address 2