Output of dmesg.

dmesg.txt (text/plain), 15.18 KB, created by Patrick Lorazo on 2010-04-17 17:24:38 UTC

Host Controller
[    4.610000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    4.615020] uhci_hcd 0000:00:10.2: detected 2 ports
[    4.620127] uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000
[    4.620129] uhci_hcd 0000:00:10.2: Performing full reset
[    4.620149] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d480
[    4.625199] usb usb4: default language 0x0409
[    4.625208] usb usb4: udev 1, busnum 4, minor = 384
[    4.625211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.630083] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.634973] usb usb4: Product: UHCI Host Controller
[    4.639997] usb usb4: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[    4.645056] usb usb4: SerialNumber: 0000:00:10.2
[    4.650203] usb usb4: uevent
[    4.650265] usb usb4: usb_probe_device
[    4.650269] usb usb4: configuration #1 chosen from 1 choice
[    4.655158] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    4.655175] usb 4-0:1.0: uevent
[    4.655212] hub 4-0:1.0: usb_probe_interface
[    4.655215] hub 4-0:1.0: usb_probe_interface - got id
[    4.655217] hub 4-0:1.0: USB hub found
[    4.659897] uhci_hcd 0000:00:10.0: port 1 portsc 008a,00
[    4.659908] uhci_hcd 0000:00:10.0: port 2 portsc 009a,00
[    4.659931] hub 4-0:1.0: 2 ports detected
[    4.664823] hub 4-0:1.0: standalone hub
[    4.664826] hub 4-0:1.0: no power switching (usb 1.0)
[    4.664829] hub 4-0:1.0: individual port over-current protection
[    4.664833] hub 4-0:1.0: power on to power good time: 2ms
[    4.664840] hub 4-0:1.0: local power source is good
[    4.664843] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    4.664896] uhci_hcd 0000:00:10.3: PCI->APIC IRQ transform: INT B -> IRQ 21
[    4.669834] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    4.674741] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    4.679635] uhci_hcd 0000:00:10.3: detected 2 ports
[    4.684671] uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000
[    4.684674] uhci_hcd 0000:00:10.3: Performing full reset
[    4.684696] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000dc00
[    4.689669] usb usb5: default language 0x0409
[    4.689677] usb usb5: udev 1, busnum 5, minor = 512
[    4.689680] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.694495] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.699316] usb usb5: Product: UHCI Host Controller
[    4.704263] usb usb5: Manufacturer: Linux 2.6.32-gentoo-r7 uhci_hcd
[    4.709210] usb usb5: SerialNumber: 0000:00:10.3
[    4.714142] hub 1-0:1.0: state 7 ports 8 chg 0024 evt 0000
[    4.714151] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[    4.714300] usb usb5: uevent
[    4.714362] usb usb5: usb_probe_device
[    4.714366] usb usb5: configuration #1 chosen from 1 choice
[    4.719171] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    4.719188] usb 5-0:1.0: uevent
[    4.719225] hub 5-0:1.0: usb_probe_interface
[    4.719228] hub 5-0:1.0: usb_probe_interface - got id
[    4.719231] hub 5-0:1.0: USB hub found
[    4.723812] uhci_hcd 0000:00:10.1: port 1 portsc 018a,00
[    4.723823] uhci_hcd 0000:00:10.1: port 2 portsc 008a,00
[    4.723845] hub 5-0:1.0: 2 ports detected
[    4.728632] hub 5-0:1.0: standalone hub
[    4.728635] hub 5-0:1.0: no power switching (usb 1.0)
[    4.728638] hub 5-0:1.0: individual port over-current protection
[    4.728642] hub 5-0:1.0: power on to power good time: 2ms
[    4.728647] hub 5-0:1.0: local power source is good
[    4.728650] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    4.728787] usbcore: registered new interface driver cdc_acm
[    4.733439] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[    4.738386] usbcore: registered new interface driver usblp
[    4.743494] Initializing USB Mass Storage driver...
[    4.748495] usbcore: registered new interface driver usb-storage
[    4.753265] USB Mass Storage support registered.
[    4.758263] usbcore: registered new interface driver libusual
[    4.763334] PNP: No PS/2 controller found. Probing ports directly.
[    4.768805] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.773672] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.778821] mice: PS/2 mouse device common for all mice
[    4.784127] ehci_hcd 0000:00:10.4: port 2 high speed
[    4.784134] ehci_hcd 0000:00:10.4: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[    4.784380] input: PC Speaker as /devices/platform/pcspkr/input/input0
[    4.789496] uhci_hcd 0000:00:10.2: port 1 portsc 01aa,00
[    4.789507] uhci_hcd 0000:00:10.2: port 2 portsc 008a,00
[    4.789706] i2c /dev entries driver
[    4.795029] cpuidle: using governor ladder
[    4.799768] cpuidle: using governor menu
[    4.804420] No iBFT detected.
[    4.810320] usbcore: registered new interface driver hiddev
[    4.815047] usbcore: registered new interface driver usbhid
[    4.819899] usbhid: v2.6:USB HID core driver
[    4.824845] Netfilter messages via NETLINK v0.30.
[    4.829655] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    4.834624] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    4.840804] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.845725] arp_tables: (C) 2002 David S. Miller
[    4.850605] uhci_hcd 0000:00:10.3: port 1 portsc 008a,00
[    4.850618] uhci_hcd 0000:00:10.3: port 2 portsc 018a,00
[    4.850634] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    4.855303] TCP cubic registered
[    4.859988] Initializing XFRM netlink socket
[    4.864846] NET: Registered protocol family 17
[    4.869938] NET: Registered protocol family 15
[    4.874845] lib80211: common routines for IEEE802.11 drivers
[    4.879648] lib80211_crypt: registered algorithm 'NULL'
[    4.879654] Using IPI Shortcut mode
[    4.885400] Freeing unused kernel memory: 280k freed
[    4.925778] ehci_hcd 0000:00:10.4: port 2 high speed
[    4.925786] ehci_hcd 0000:00:10.4: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[    5.012558] usb 1-2: default language 0x0409
[    5.018944] usb 1-2: udev 2, busnum 1, minor = 1
[    5.018949] usb 1-2: New USB device found, idVendor=050d, idProduct=935a
[    5.018952] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.018957] usb 1-2: Product: 802.11 n WLAN
[    5.018960] usb 1-2: Manufacturer: Ralink
[    5.018962] usb 1-2: SerialNumber: 1.0
[    5.019182] usb 1-2: uevent
[    5.019330] usb 1-2: usb_probe_device
[    5.019336] usb 1-2: configuration #1 chosen from 1 choice
[    5.019432] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[    5.020578] usb 1-2:1.0: uevent
[    5.021341] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[    5.021353] ehci_hcd 0000:00:10.4: port 5 low speed --> companion
[    5.073448] ehci_hcd 0000:00:10.4: GetStatus port 5 status 003402 POWER OWNER sig=k CSC
[    5.073475] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.073480] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.073484] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.073488] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    5.073492] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0020
[    5.189474] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[    5.189486] uhci_hcd 0000:00:10.2: port 1 portsc 01a3,00
[    5.189495] hub 4-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[    5.317451] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[    5.429459] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    5.437717] NCR53c406a: no available ports found
[    5.519914] scsi: <fdomain> Detection failed (no card)
[    5.540339] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    5.584252] usb 4-1: skipped 1 descriptor after interface
[    5.589242] usb 4-1: default language 0x0409
[    5.606253] usb 4-1: udev 2, busnum 4, minor = 385
[    5.606258] usb 4-1: New USB device found, idVendor=046d, idProduct=c00e
[    5.606262] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.606266] usb 4-1: Product: USB-PS/2 Optical Mouse
[    5.606269] usb 4-1: Manufacturer: Logitech
[    5.606488] usb 4-1: uevent
[    5.606953] usb 4-1: usb_probe_device
[    5.606960] usb 4-1: configuration #1 chosen from 1 choice
[    5.609357] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[    5.609449] usb 4-1:1.0: uevent
[    5.609917] usbhid 4-1:1.0: usb_probe_interface
[    5.609923] usbhid 4-1:1.0: usb_probe_interface - got id
[    5.624072] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/input/input2
[    5.627524] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1/input0
[    5.627579] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002
[    5.642923] NCR53c406a: no available ports found
[    5.729033] sym53c416.c: Version 1.0.0-ac
[    5.789094] Adaptec aacraid driver 1.1-5[2461]-ms
[    5.933439] usb usb2: suspend_rh (auto-stop)
[    5.933458] usb usb3: suspend_rh (auto-stop)
[    6.022436] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[    6.022441] Copyright (c) 1999-2006 Intel Corporation.
[    6.181466] usb usb5: suspend_rh (auto-stop)
[    9.195701] kjournald starting.  Commit interval 5 seconds
[    9.195713] EXT3-fs: mounted filesystem with writeback data mode.
[   12.009925] udev: starting version 149
[   12.043208] usb usb2: uevent
[   12.043565] usb 2-0:1.0: uevent
[   12.044396] usb usb3: uevent
[   12.044551] usb 3-0:1.0: uevent
[   12.044870] usb usb4: uevent
[   12.045007] usb 4-0:1.0: uevent
[   12.045074] usb 4-1: uevent
[   12.045139] usb 4-1:1.0: uevent
[   12.069841] usb usb5: uevent
[   12.070036] usb 5-0:1.0: uevent
[   12.070411] usb usb1: uevent
[   12.070542] usb 1-0:1.0: uevent
[   12.070612] usb 1-2: uevent
[   12.070696] usb 1-2:1.0: uevent
[   12.130966] usb usb4: uevent
[   12.131951] usb usb3: uevent
[   12.132948] usb usb5: uevent
[   12.151015] usb usb2: uevent
[   12.157337] usb usb1: uevent
[   12.220013] usb 1-2: uevent
[   12.238722] usb 4-1: uevent
[   12.257147] Linux agpgart interface v0.103
[   12.316561] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   12.316624] via-rhine 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[   12.317070] eth0: VIA Rhine II at 0x1d800, 00:1b:fc:0b:af:d3, IRQ 23.
[   12.317790] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[   12.324593] usb 4-1:1.0: uevent
[   12.324714] usb 4-1: uevent
[   12.326063] usb 4-1:1.0: uevent
[   12.326173] usb 4-1: uevent
[   12.331450] agpgart: Detected VIA VT3314 chipset
[   12.370085] usb 4-1:1.0: uevent
[   12.373033] usb 4-1:1.0: uevent
[   12.385157] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[   12.468931] rtusb init --->
[   12.471777] 8139too Fast Ethernet driver 0.9.28
[   12.472826] 8139too 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[   12.473800] eth1: RealTek RTL8139 at 0xf8072400, 00:e0:7d:cf:cb:3c, IRQ 18
[   12.474259] rt2870 1-2:1.0: usb_probe_interface
[   12.474266] rt2870 1-2:1.0: usb_probe_interface - got id
[   12.474985] 
[   12.474987] 
[   12.474988] === pAd = f9432000, size = 500200 ===
[   12.474989] 
[   12.475075] <-- RTMPAllocAdapterBlock, Status=0
[   12.493120] usbcore: registered new interface driver rt2870
[   12.528654] udev: renamed network interface eth1 to eth0
[   12.554310] udev: renamed network interface eth0_rename to eth1
[   12.968032] ENS1371 0000:00:0b.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[   14.504889] EXT3 FS on hda3, internal journal
[   14.780274] Slow work thread pool: Starting up
[   14.780331] Slow work thread pool: Ready
[   14.858968] w83627hf: Found W83697HF chip at 0x290
[   15.170454] kjournald starting.  Commit interval 5 seconds
[   15.170627] EXT3 FS on hda1, internal journal
[   15.170633] EXT3-fs: mounted filesystem with writeback data mode.
[   15.241026] Adding 987988k swap on /dev/hda2.  Priority:-1 extents:1 across:987988k 
[   64.424533] EXT3 FS on hda3, internal journal
[   70.806622] <-- RTMPAllocTxRxRingMemory, Status=0
[   70.808325] -->RTUSBVenderReset
[   70.808449] <--RTUSBVenderReset
[   71.123588] 1. Phy Mode = 0
[   71.123591] 2. Phy Mode = 0
[   71.123595] NVM is Efuse and its size =2d[2d0-2fc] 
[   71.178139] RTMPSetPhyMode: channel is out of range, use first channel=1 
[   71.193013] 3. Phy Mode = 0
[   71.284030] MCS Set = 00 00 00 00 00
[   71.296534] <==== rt28xx_init, Status=0
[   71.298031] 0x1300 = 000a4200
[   91.403794] usb usb2: uevent
[   91.403915] usb 2-0:1.0: uevent
[   91.404051] usb usb3: uevent
[   91.404163] usb 3-0:1.0: uevent
[   91.404326] usb usb4: uevent
[   91.404441] usb 4-0:1.0: uevent
[   91.404514] usb 4-1: uevent
[   91.404626] usb 4-1:1.0: uevent
[   91.405268] usb usb5: uevent
[   91.405380] usb 5-0:1.0: uevent
[   91.405515] usb usb1: uevent
[   91.405627] usb 1-0:1.0: uevent
[   91.405698] usb 1-2: uevent
[   91.406205] usb 1-2:1.0: uevent
[  101.137115] /dev/vmmon[8178]: Module vmmon: registered with major=10 minor=165
[  101.137126] /dev/vmmon[8178]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
[  101.137130] /dev/vmmon[8178]: Module vmmon: initialized
[  101.290252] /dev/vmci[8194]: VMCI: Driver initialized.
[  101.291010] /dev/vmci[8194]: Module vmci: registered with major=10 minor=58
[  101.291015] /dev/vmci[8194]: Module vmci: initialized
[  101.718404] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[  101.718436] parport0: irq 7 detected
[  107.230287] /dev/vmnet: open called by PID 8237 (vmnet-bridge)
[  107.230300] /dev/vmnet: hub 0 does not exist, allocating memory.
[  107.230318] /dev/vmnet: port on hub 0 successfully opened
[  107.230336] bridge-ra0: is a Wireless Adapter
[  107.230342] bridge-ra0: up
[  107.230347] bridge-ra0: attached
[  109.812041] /dev/vmnet: open called by PID 8754 (vmnet-dhcpd)
[  109.812055] /dev/vmnet: hub 1 does not exist, allocating memory.
[  109.812075] /dev/vmnet: port on hub 1 successfully opened
[  109.891681] /dev/vmnet: open called by PID 8758 (vmnet-netifup)
[  109.891699] /dev/vmnet: port on hub 1 successfully opened
[  109.945470] /dev/vmnet: open called by PID 8761 (vmnet-dhcpd)
[  109.945486] /dev/vmnet: hub 8 does not exist, allocating memory.
[  109.945506] /dev/vmnet: port on hub 8 successfully opened
[  109.998998] /dev/vmnet: open called by PID 8763 (vmnet-natd)
[  109.999017] /dev/vmnet: port on hub 8 successfully opened
[  110.004485] /dev/vmnet: open called by PID 8767 (vmnet-netifup)
[  110.004506] /dev/vmnet: port on hub 8 successfully opened
[  112.765227] [drm] Initialized drm 1.1.0 20060810
[  112.851497] [drm] radeon defaulting to userspace modesetting.
[  112.853878] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[  113.139696] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[  113.139723] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[  113.139813] radeonfb 0000:01:00.0: putting AGP V3 device into 8x mode
[  113.374896] [drm] Setting GART location based on new memory map
[  113.374962] [drm] Loading R200 Microcode
[  113.375321] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
[  113.424810] [drm] writeback test succeeded in 1 usecs
[  115.296125] uhci_hcd 0000:00:10.2: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[  300.094888] Machine check events logged