dmesg 2010-03-22

dmesg-100322.txt (text/plain), 30.18 KB, created by Petr Lanc on 2010-03-23 18:02:13 UTC

 2 mirrors
md1: detected capacity change from 0 to 304218112
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 57475072
md: ... autorun DONE.
 md1: unknown partition table
EXT3-fs: dm-0: couldn't mount because of unsupported optional features (240).
EXT2-fs: dm-0: couldn't mount because of unsupported optional features (240).
EXT4-fs (dm-0): mounted filesystem with ordered data mode
PM: Starting manual resume from disk
EXT3-fs: dm-0: couldn't mount because of unsupported optional features (240).
EXT2-fs: dm-0: couldn't mount because of unsupported optional features (240).
EXT4-fs (dm-0): mounted filesystem with ordered data mode
udev: starting version 149
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:08.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
fan PNP0C0B:00: registered as cooling_device2
ACPI: Fan [FAN] (on)
 md0: unknown partition table
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:fc:03:5a
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x1c40-0x1c45]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-1: nForce2 SMBus adapter at 0x1c40
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input4
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
nvidia 0000:07:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:07:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
EXT4-fs (dm-12): mounted filesystem with ordered data mode
EXT4-fs (dm-22): mounted filesystem with writeback data mode
EXT4-fs (dm-23): mounted filesystem with writeback data mode
EXT4-fs (dm-8): mounted filesystem with ordered data mode
EXT4-fs (dm-17): mounted filesystem with ordered data mode
EXT4-fs (dm-20): mounted filesystem with writeback data mode
EXT4-fs (dm-21): mounted filesystem with writeback data mode
EXT4-fs (dm-13): mounted filesystem with ordered data mode
EXT4-fs (dm-19): mounted filesystem with ordered data mode
EXT4-fs (dm-24): mounted filesystem with writeback data mode
Adding 4006188k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:4006188k 
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
it87: Found IT8716F chip at 0x290, revision 1
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: New USB device found, idVendor=0471, idProduct=2070
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-5: Product: GoGear Mix
usb 1-5: Manufacturer: Philips
usb 1-5: SerialNumber: 431400011AEF19380002DA732F689938
usb 1-5: configuration #1 chosen from 2 choices
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access     Philips  GoGear Mix       0100 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 6:0:0:0: [sdc] 964096 4096-byte logical blocks: (3.94 GB/3.67 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 3e 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 964096 4096-byte logical blocks: (3.94 GB/3.67 GiB)
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: [sdc] 964096 4096-byte logical blocks: (3.94 GB/3.67 GiB)
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-5: USB disconnect, address 2
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: New USB device found, idVendor=090c, idProduct=1000
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Flash Voyager
usb 1-5: Manufacturer: Corsair
usb 1-5: SerialNumber: AA04012700012274
usb 1-5: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 7:0:0:0: Direct-Access     Corsair  Flash Voyager    1100 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 7:0:0:0: [sdc] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 1-5: USB disconnect, address 3
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... 
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
done (allocated 391690 pages)
PM: Allocated 1566760 kbytes in 12.63 seconds (124.05 MB/s)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
forcedeth 0000:00:08.0: PCI INT A disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 127736 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 10.47 seconds (149.64 MB/s)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 123979 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 10.75 seconds (145.74 MB/s)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 124327 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391695 pages)
PM: Allocated 1566780 kbytes in 10.50 seconds (149.21 MB/s)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 125493 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391699 pages)
PM: Allocated 1566796 kbytes in 11.54 seconds (135.77 MB/s)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 127870 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
Clocksource tsc unstable (delta = 62566462 ns)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Preallocating image memory... done (allocated 391714 pages)
PM: Allocated 1566856 kbytes in 16.87 seconds (92.87 MB/s)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI handle has no context!
parport_pc 00:09: disabled
serial 00:08: disabled
HDA Intel 0000:00:06.1: PCI INT B disabled
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
ACPI: Preparing to enter system sleep state S4
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
Extended CMOS year: 2000
PM: Creating hibernation image: 
PM: Need to copy 127973 pages
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
CPU1 is up
ACPI: Waking up from system sleep state S4
AMD_IDE 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00001, writing 0xb00005)
sata_nv 0000:00:05.0: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.1: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
sata_nv 0000:00:05.2: restoring config space at offset 0x1 (was 0xb00003, writing 0xb00007)
HDA Intel 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
nvidia 0000:07:00.0: restoring config space at offset 0xc (was 0xfcfe0000, writing 0x0)
nvidia 0000:07:00.0: restoring config space at offset 0x3 (was 0x8, writing 0x0)
ohci_hcd 0000:00:02.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
ehci_hcd 0000:00:02.1: setting latency timer to 64
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
AMD_IDE 0000:00:04.0: setting latency timer to 64
amd74xx 0000:00:04.0: BIOS didn't set cable bits correctly. Enabling workaround.
sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.0: setting latency timer to 64
sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:05.1: setting latency timer to 64
sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.2: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:06.1: setting latency timer to 64
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
eth0: no link during initialization.
serial 00:08: activated
parport_pc 00:09: activated
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
Restarting tasks ... done.
eth0: link up.
EXT4-fs error (device dm-0): ext4_mb_generate_buddy: EXT4-fs: group 9: 4122 blocks in bitmap, 4079 in gd
Aborting journal on device dm-0-8.
EXT4-fs (dm-0): Remounting filesystem read-only
EXT4-fs error (device dm-0) in ext4_reserve_inode_write: Journal has aborted
EXT4-fs error (device dm-0) in ext4_reserve_inode_write: Journal has aborted
EXT4-fs error (device dm-0) in ext4_ext_remove_space: Journal has aborted
EXT4-fs error (device dm-0) in ext4_reserve_inode_write: Journal has aborted
EXT4-fs error (device dm-0) in ext4_ext_truncate: Journal has aborted
EXT4-fs error (device dm-0) in ext4_reserve_inode_write: Journal has aborted
EXT4-fs error (device dm-0) in ext4_orphan_del: Journal has aborted
EXT4-fs error (device dm-0) in ext4_reserve_inode_write: Journal has aborted