dmesg output right after boot

dmesg.out (text/plain), 26.98 KB, created by Mark A Rada on 2010-03-05 03:50:07 UTC

Linux version 2.6.33-gentoo-ferrous26 (root@seireitei) (gcc version 4.4.3 (Gentoo 4.4.3 p1.0) ) #9 Mon Mar 1 00:47:12 EST 2010
Command line: root=/dev/sda1           
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000100 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
 BIOS-e820: 000000007dee0000 - 000000007dee3000 (ACPI NVS)
 BIOS-e820: 000000007dee3000 - 000000007def0000 (ACPI data)
 BIOS-e820: 000000007def0000 - 000000007df00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
No AGP bridge found
last_pfn = 0x7dee0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007dee0000
 0000000000 - 007de00000 page 2M
 007de00000 - 007dee0000 page 4k
kernel direct mapping tables up to 7dee0000 @ 8000-c000
ACPI: RSDP 00000000000f81e0 00024 (v02 ATI   )
ACPI: XSDT 000000007dee3100 0004C (v01 ATI    ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000007dee8440 000F4 (v03 ATI    ASUSACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000007dee3280 0515D (v01 ATI    ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS 000000007dee0000 00040
ACPI: SSDT 000000007dee8680 000D3 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 000000007dee87c0 00038 (v01 ATI    ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 000000007dee8840 0003C (v01 ATI    ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 000000007dee8580 00084 (v01 ATI    ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(4 early reservations) ==> bootmem [0000000000 - 007dee0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 000148ca04]    TEXT DATA BSS ==> [0001000000 - 000148ca04]
  #2 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #3 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001a00000-ffff8800035fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0007dee0
On node 0 totalpages: 515710
  DMA zone: 56 pages used for memmap
  DMA zone: 99 pages reserved
  DMA zone: 3843 pages, LIFO batch:0
  DMA32 zone: 6997 pages used for memmap
  DMA32 zone: 504715 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8200 base: 0xfed00000
nr_irqs_gsi: 24
Allocating PCI resources starting at 7df00000 (gap: 7df00000:62100000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 508558
Kernel command line: root=/dev/sda1           
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ ffae000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2025840k/2063232k available (2915k kernel code, 392k absent, 36504k reserved, 1113k data, 224k init)
NR_IRQS:288
Console: colour VGA+ 80x25
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1799.670 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.34 BogoMIPS (lpj=1799670)
Mount-cache hash table entries: 256
tseg: 007df00000
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
CPU: AMD Sempron(tm) Processor 3400+ stepping 02
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
devtmpfs: initialized
NET: Registered protocol family 16
node 0 link 0: io port [b000, ffff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff]
bus: [00, 03] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [80000000, efffffff]
bus: 00 index 3 mmio: [f0000000, fcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:12.0: reg 10: [io  0xfc00-0xfc07]
pci 0000:00:12.0: reg 14: [io  0xf800-0xf803]
pci 0000:00:12.0: reg 18: [io  0xf400-0xf407]
pci 0000:00:12.0: reg 1c: [io  0xf000-0xf003]
pci 0000:00:12.0: reg 20: [io  0xec00-0xec0f]
pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10: [io  0x0b00-0x0b0f]
pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io  0xe400-0xe40f]
pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:01:05.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:01:05.0: reg 18: [mem 0xfdbf0000-0xfdbfffff 64bit]
pci 0000:01:05.0: reg 20: [io  0xcc00-0xccff]
pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdbfffff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:02:00.0: reg 10: [io  0xdc00-0xdcff]
pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:03:05.0: reg 10: [mem 0xfdeff000-0xfdefffff]
pci 0000:03:05.0: reg 14: [io  0xbc00-0xbc3f]
pci 0000:03:05.0: reg 18: [mem 0xfdec0000-0xfdedffff]
pci 0000:03:05.0: reg 30: [mem 0xfdea0000-0xfdeaffff pref]
pci 0000:03:05.0: supports D1 D2
pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:05.0: PME# disabled
pci 0000:03:06.0: reg 10: [mem 0xfdef8000-0xfdefbfff]
pci 0000:03:06.0: reg 14: [io  0xb800-0xb8ff]
pci 0000:03:06.0: reg 30: [mem 0xfdea0000-0xfdebffff pref]
pci 0000:03:06.0: supports D1 D2
pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:06.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x4100-0x411f] has been reserved
system 00:01: [io  0x0228-0x022f] has been reserved
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c52] has been reserved
system 00:01: [io  0x0c6c-0x0c6d] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cdf] has been reserved
system 00:01: [io  0x4000-0x40fe] has been reserved
system 00:01: [io  0x4210-0x4217] has been reserved
system 00:01: [io  0x0b00-0x0b0f] has been reserved
system 00:01: [io  0x0b10-0x0b1f] has been reserved
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x0220-0x0225] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: [mem 0x000d1800-0x000d3fff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0x7def0000-0x7dfeffff] could not be reserved
system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:0b: [mem 0x7dee0000-0x7defffff] could not be reserved
system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0x7dedffff] could not be reserved
system 00:0b: [mem 0x7dff0000-0x7ffeffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
pci 0000:03:06.0: address space collision: [mem 0xfdea0000-0xfdebffff pref] already in use
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfda00000-0xfdbfffff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 02-02]
pci 0000:00:07.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:03:06.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:07.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff]
pci_bus 0000:01: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 3 [io  0x0000-0xffff]
pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
DLM (built Mar  1 2010 00:39:40) installed
fuse init (API version 7.13)
Btrfs loaded
msgmni has been set to 3957
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20091214/nspredef-1040)
ACPI: Expecting a [Reference] package element, found type 0
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
brd: module loaded
loop: module loaded
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e100 0000:03:05.0: PME# disabled
e100: eth0: e100_probe: addr 0xfdeff000, irq 20, MAC addr 00:0e:0c:64:92:b0
sky2 driver version 1.26
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:02:00.0: PCI INT A disabled
r8169: probe of 0000:02:00.0 failed with error -22
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33-gentoo-ferrous26 ehci_hcd
usb usb1: SerialNumber: 0000:00:13.5
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33-gentoo-ferrous26 ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33-gentoo-ferrous26 ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33-gentoo-ferrous26 ohci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33-gentoo-ferrous26 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.33-gentoo-ferrous26 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
it87: Found IT8716F chip at 0x228, revision 1
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
ACPI: I/O resource it87 [0x22d-0x22e] conflicts with ACPI region HWRE [0x22d-0x22e]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
GACT probability NOT on
Mirror/redirect action on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
SCTP: Hash tables configured (established 65536 bind 65536)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
ata3.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
usb 1-2: new high speed USB device using ehci_hcd and address 2
ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
ata2.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
ata3.00: configured for UDMA/133
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: Direct-Access     ATA      WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc:
sd 2:0:0:0: Attached scsi generic sg2 type 0
ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
 sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
ata4.00: configured for UDMA/133
 sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd:
sd 3:0:0:0: Attached scsi generic sg3 type 0
 sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
 sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 224k freed
Warning: unable to open an initial console.
usb 1-2: New USB device found, idVendor=05ac, idProduct=1006
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Keyboard Hub
usb 1-2: Manufacturer: Apple, Inc.
usb 1-2: SerialNumber: 000000000000
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
usb 1-2.2: new low speed USB device using ehci_hcd and address 3
usb 1-2.2: New USB device found, idVendor=05ac, idProduct=0220
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: Apple Keyboard
usb 1-2.2: Manufacturer: Apple, Inc
input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:13.5/usb1/1-2/1-2.2/1-2.2:1.0/input/input2
apple 0003:05AC:0220.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:13.5-2.2/input0
input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:13.5/usb1/1-2/1-2.2/1-2.2:1.1/input/input3
apple 0003:05AC:0220.0002: input,hidraw1: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:13.5-2.2/input1
usb 1-2.3: new low speed USB device using ehci_hcd and address 4
usb 1-2.3: New USB device found, idVendor=046d, idProduct=c521
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Receiver
usb 1-2.3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.5/usb1/1-2/1-2.3/1-2.3:1.0/input/input4
generic-usb 0003:046D:C521.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.5-2.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.5/usb1/1-2/1-2.3/1-2.3:1.1/input/input5
generic-usb 0003:046D:C521.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.5-2.3/input1
udev: starting version 151
udev: renamed network interface eth0 to senkaimon
device fsid 24492b7f3af477da-b98180a6fd0512b4 devid 2 transid 20549 /dev/sdc1
btrfs: setting nodatacow
btrfs: failed to read the system array on sdc1
btrfs: open_ctree failed
device fsid 6141e9f23c167219-9a8fc4ca50c1ca82 devid 1 transid 2009 /dev/sdd1
btrfs: setting nodatacow
btrfs: use compression
Adding 3145720k swap on /.swap.  Priority:-1 extents:11 across:5824504k