dmesg output from patched gentoo-sources-2.6.31-r6

dmesg-2.6.31-patch.txt (text/plain), 42.07 KB, created by Ryan May on 2010-01-09 06:09:46 UTC

Linux version 2.6.31-gentoo-r6 (root@raman) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #8 SMP Thu Dec 17 15:59:23 CST 2009
Command line: root=/dev/sda5 resume=/dev/sda6 video=vesafb:mtrr:3,ywrap vga=865 console=tty1 splash=silent,fadein,theme:natural_gentoo
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bde6b000 (usable)
 BIOS-e820: 00000000bde6b000 - 00000000bdebf000 (reserved)
 BIOS-e820: 00000000bdebf000 - 00000000bdf83000 (usable)
 BIOS-e820: 00000000bdf83000 - 00000000bdfbf000 (ACPI NVS)
 BIOS-e820: 00000000bdfbf000 - 00000000bdfde000 (usable)
 BIOS-e820: 00000000bdfde000 - 00000000bdff6000 (ACPI data)
 BIOS-e820: 00000000bdff6000 - 00000000bdffe000 (usable)
 BIOS-e820: 00000000bdffe000 - 00000000bdfff000 (ACPI data)
 BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable)
 BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.4 present.
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-EFFFF write-through
  F0000-FFFFF write-combining
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 0FFF00000 mask FFFF00000 write-protect
  2 base 080000000 mask FC0000000 write-back
  3 base 0BE000000 mask FFE000000 uncachable
  4 base 100000000 mask FC0000000 write-back
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (usable)
 modified: 0000000000001000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 000000000009e000 (usable)
 modified: 000000000009e000 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bde6b000 (usable)
 modified: 00000000bde6b000 - 00000000bdebf000 (reserved)
 modified: 00000000bdebf000 - 00000000bdf83000 (usable)
 modified: 00000000bdf83000 - 00000000bdfbf000 (ACPI NVS)
 modified: 00000000bdfbf000 - 00000000bdfde000 (usable)
 modified: 00000000bdfde000 - 00000000bdff6000 (ACPI data)
 modified: 00000000bdff6000 - 00000000bdffe000 (usable)
 modified: 00000000bdffe000 - 00000000bdfff000 (ACPI data)
 modified: 00000000bdfff000 - 00000000be000000 (usable)
 modified: 00000000be000000 - 00000000c0000000 (reserved)
 modified: 00000000f8000000 - 00000000fc000000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fed10000 - 00000000fed14000 (reserved)
 modified: 00000000fed18000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed20000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000fff00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000140000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000be000000
 0000000000 - 00be000000 page 2M
kernel direct mapping tables up to be000000 @ 8000-c000
init_memory_mapping: 0000000100000000-0000000140000000
 0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ a000-10000
RAMDISK: 37edc000 - 37fef0f9
ACPI: RSDP 00000000000fe020 00024 (v02 HP    )
ACPI: XSDT 00000000bdffe120 00074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
ACPI: FACP 00000000bdff3000 000F4 (v04 HP     BLADE    00000001 MSFT 01000013)
ACPI: DSDT 00000000bdfe3000 0B177 (v01 HP     BLADE    00000001 MSFT 01000013)
ACPI: FACS 00000000bdf8c000 00040
ACPI: DMAR 00000000bdff5000 00090 (v01                00000001      00000000)
ACPI: SSDT 00000000bdff4000 00655 (v01  PmRef    CpuPm 00003000 INTL 20060912)
ACPI: HPET 00000000bdff2000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 00000000bdff1000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 00000000bdff0000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: ASF! 00000000bdfef000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 00000000bdfe2000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240)
ACPI: BOOT 00000000bdfe1000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 00000000bdfe0000 00296 (v01 INTEL  SataAhci 00001000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0140000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000166d6d4]    TEXT DATA BSS ==> [0001000000 - 000166d6d4]
  #3 [0037edc000 - 0037fef0f9]          RAMDISK ==> [0037edc000 - 0037fef0f9]
  #4 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
  #5 [000166e000 - 000166e208]              BRK ==> [000166e000 - 000166e208]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
  #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bde6b
    0: 0x000bdebf -> 0x000bdf83
    0: 0x000bdfbf -> 0x000bdfde
    0: 0x000bdff6 -> 0x000bdffe
    0: 0x000bdfff -> 0x000be000
    0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1040112
  DMA zone: 56 pages used for memmap
  DMA zone: 104 pages reserved
  DMA zone: 3833 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 759695 pages, LIFO batch:31
  Normal zone: 3584 pages used for memmap
  Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bde6b000 - 00000000bdebf000
PM: Registered nosave memory: 00000000bdf83000 - 00000000bdfbf000
PM: Registered nosave memory: 00000000bdfde000 - 00000000bdff6000
PM: Registered nosave memory: 00000000bdffe000 - 00000000bdfff000
PM: Registered nosave memory: 00000000be000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages at ffff880028023000, static data 79328 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1022088
Kernel command line: root=/dev/sda5 resume=/dev/sda6 video=vesafb:mtrr:3,ywrap vga=865 console=tty1 splash=silent,fadein,theme:natural_gentoo
PID hash table entries: 4096 (order: 12, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4021680k/5242880k available (3881k kernel code, 1082432k absent, 137788k reserved, 1800k data, 388k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
NR_IRQS:384
Fast TSC calibration using PIT
Detected 2659.965 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.93 BogoMIPS (lpj=2659965)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version:                 2
... bit width:               40
... generic counters:        2
... value mask:              000000ffffffffff
... max period:              000000007fffffff
... fixed-purpose counters:  3
... counter mask:            0000000700000003
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T9550  @ 2.66GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5426.11 BogoMIPS (lpj=2713056)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T9550  @ 2.66GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10746.04 BogoMIPS).
Time:  5:48:35  Date: 01/09/10
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Enabling special treatment for EC from MSI.
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [FN00] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x70c0-0x70df]
pci 0000:00:1a.1: reg 20 io port: [0x70a0-0x70bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xdd004c00-0xdd004fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xdd000000-0xdd003fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x7080-0x709f]
pci 0000:00:1d.1: reg 20 io port: [0x7060-0x707f]
pci 0000:00:1d.2: reg 20 io port: [0x7040-0x705f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdd004800-0xdd004bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x70e8-0x70ef]
pci 0000:00:1f.2: reg 14 io port: [0x70f4-0x70f7]
pci 0000:00:1f.2: reg 18 io port: [0x70e0-0x70e7]
pci 0000:00:1f.2: reg 1c io port: [0x70f0-0x70f3]
pci 0000:00:1f.2: reg 20 io port: [0x7020-0x703f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xdd004000-0xdd0047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xdd005000-0xdd0050ff]
pci 0000:00:1f.3: reg 20 io port: [0x7000-0x701f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:01:00.0: reg 24 io port: [0x6000-0x607f]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:1c.0: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdc000000-0xdcffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd3ffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xdb000000-0xdb001fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xdb000000-0xdbffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd4000000-0xd4ffffff]
pci 0000:04:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:04:00.0: reg 18 64bit mmio: [0xd5010000-0xd5010fff]
pci 0000:04:00.0: reg 20 64bit mmio: [0xd5000000-0xd500ffff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xda000000-0xdaffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd5000000-0xd5ffffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xd9000300-0xd90003ff]
pci 0000:05:00.2: reg 10 32bit mmio: [0xd9000200-0xd90002ff]
pci 0000:05:00.3: reg 10 32bit mmio: [0xd9000100-0xd90001ff]
pci 0000:05:00.4: reg 10 32bit mmio: [0xd9000000-0xd90000ff]
pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xd9000000-0xd9ffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd6000000-0xd6ffffff]
pci 0000:00:1c.5: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xd8000000-0xd8ffffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd7000000-0xd7ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 13 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x600-0x60f has been reserved
system 00:01: ioport range 0x610-0x610 has been reserved
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x810-0x817 has been reserved
system 00:01: ioport range 0x820-0x823 has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x53f has been reserved
system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
pci 0000:04:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff]
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0x6000-0x6fff
pci 0000:00:01.0:   MEM window: 0xd0000000-0xd2ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x5000-0x5fff
pci 0000:00:1c.0:   MEM window: 0xdc000000-0xdcffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000d3000000-0x000000d3ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
pci 0000:00:1c.2:   MEM window: 0xdb000000-0xdbffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000d4000000-0x000000d4ffffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.3:   IO window: 0x3000-0x3fff
pci 0000:00:1c.3:   MEM window: 0xda000000-0xdaffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000d5000000-0x000000d5ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4:   IO window: 0x2000-0x2fff
pci 0000:00:1c.4:   MEM window: 0xd9000000-0xd9ffffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000d6000000-0x000000d6ffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.5:   IO window: 0x1000-0x1fff
pci 0000:00:1c.5:   MEM window: 0xd8000000-0xd8ffffff
pci 0000:00:1c.5:   PREFETCH window: 0x000000d7000000-0x000000d7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0x6000-0x6fff]
pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 0 io:  [0x5000-0x5fff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdcffffff]
pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd3ffffff]
pci_bus 0000:03: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:03: resource 1 mem: [0xdb000000-0xdbffffff]
pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd4ffffff]
pci_bus 0000:04: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:04: resource 1 mem: [0xda000000-0xdaffffff]
pci_bus 0000:04: resource 2 pref mem [0xd5000000-0xd5ffffff]
pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0xd9000000-0xd9ffffff]
pci_bus 0000:05: resource 2 pref mem [0xd6000000-0xd6ffffff]
pci_bus 0000:06: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:06: resource 1 mem: [0xd8000000-0xd8ffffff]
pci_bus 0000:06: resource 2 pref mem [0xd7000000-0xd7ffffff]
pci_bus 0000:09: resource 3 io:  [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 1100k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1263016116.010:1): initialized
fuse init (API version 7.12)
Btrfs loaded
msgmni has been set to 7858
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90004100000, using 8000k, total 14336k
vesafb: mode is 1280x800x32, linelength=5120, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fbcondecor: console 0 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 0
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (off)
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
acpi device:09: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/device:08/input/input4
ACPI: Video Device [EVGA] (multi-head: yes  rom: no  post: no)
ACPI: SSDT 00000000bde6ec18 002A7 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 00000000bde6c618 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device2
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 00000000bde6de18 001CF (v01  PmRef    ApIst 00003000 INTL 20060912)
ACPI: SSDT 00000000bde6ef18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device3
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (55 C)
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004180 irq 30
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004300 irq 30
ata6: SATA max UDMA/133 abar m2048@0xdd004000 port 0xdd004380 irq 30
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 31 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc9000005a000, 00:23:5a:2a:ed:b3, XID 3c4000c0 IRQ 31
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdd004c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdd004800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070c0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000070a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00007060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007040
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x7000-0x701f] conflicts with ACPI region SMBI [0x7000-0x700f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
lis3lv02d: laptop model unknown, using default axes configuration
lis3lv02d: 1-byte sensor found
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
Registered led device: hp::hddprotect
lis3lv02d driver loaded.
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
input: HP WMI hotkeys as /devices/virtual/input/input7
Advanced Linux Sound Architecture Driver Version 1.0.20.
ALSA device list:
  No soundcards found.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
PM: Checking image partition /dev/sda6
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: WDC WD3200BEVT-60ZCT1, 13.01A13, max UDMA/100
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/100
usb 2-5: new high speed USB device using ehci_hcd and address 3
Clocksource tsc unstable (delta = -273181263 ns)
usb 2-5: configuration #1 chosen from 1 choice
uvcvideo: Found UVC 1.00 device HP Webcam  (046d:09b8)
input: HP Webcam  as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
ACPI: Battery Slot [BAT0] (battery present)
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-6 13.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9
generic-usb 0003:046D:C526.0001: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input10
generic-usb 0003:046D:C526.0002: input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:01:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
ata2.00: ACPI cmd ef/10:04:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: Optiarc DVD RW AD-7560S, SH03, max UDMA/100
ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:01:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:02:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:03:00:00:00:b0 filtered out
ata2.00: ACPI cmd ef/10:04:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd ef/10:05:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7560S  SH03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
PM: Resume from partition 8:6
PM: Checking hibernation image.
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 10:957:819
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
Freeing unused kernel memory: 388k freed
Write protecting the kernel read-only data: 5208k
udev: starting version 146
lirc_dev: IR Remote Control driver registered, major 61 
lirc_dev: lirc_register_driver: sample_rate: 0
enecir: KB3926C detected, driver support is not complete!
enecir: chip is 0x3926 - 0x00, 0xc0
enecir: hardware features:
enecir: learning and tx off, gpio40_learn off, fan_in off
enecir: driver has been succesfully loaded
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
jmb38x_ms 0000:05:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
jmb38x_ms 0000:05:00.3: setting latency timer to 64
sdhci-pci 0000:05:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:05:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
sdhci-pci 0000:05:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:05:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:05:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:05:00.2: PCI INT A disabled
input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input14
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input15
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.53  Wed Dec  9 15:29:46 PST 2009
EXT3 FS on sda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 7815580k swap on /dev/sda6.  Priority:-1 extents:1 across:7815580k 
fbcondecor: console 0 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 2
fbcondecor: console 3 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 4
fbcondecor: console 5 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 5
fbcondecor: console 6 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 6
fbcondecor: console 7 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 7
fbcondecor: console 8 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 8
fbcondecor: console 9 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 9
fbcondecor: console 10 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 10
fbcondecor: console 11 using theme 'natural_gentoo'
fbcondecor: switched decor state to 'on' on console 11
input: lircd as /devices/virtual/input/input16
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi scan: INQUIRY result too short (5), using 36
scsi 6:0:0:0: Direct-Access              USB Mass Storage v1.0 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 12609 512-byte logical blocks: (6.45 MB/6.15 MiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk