dmesg output after boot with 2.6.30-r3 kernel

dmesg_2.6.30-r3.txt (text/plain), 37.82 KB, created by Asko Eronen on 2009-07-26 16:26:40 UTC

Initializing cgroup subsys cpuset
Linux version 2.6.30-gentoo-r3 (root@atomi) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #1 SMP Tue Jul 21 21:16:47 EEST 2009
Command line: root=/dev/sda3 video=intelfb:mode=1024x768-32@60
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
 BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
 BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data)
 BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7f6e0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask 080000000 write-back
  1 base 07F800000 mask 0FF800000 uncachable
  2 base 07F700000 mask 0FFF00000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000007f6e0000
 0000000000 - 007f600000 page 2M
 007f600000 - 007f6e0000 page 4k
kernel direct mapping tables up to 7f6e0000 @ 10000-14000
ACPI: RSDP 00000000000f9280 00014 (v00 Shuttl)
ACPI: RSDT 000000007f6e3000 00034 (v01 Shuttl Shuttle  42302E31 AWRD 00000000)
ACPI: FACP 000000007f6e3080 00074 (v01 Shuttl Shuttle  42302E31 AWRD 00000000)
ACPI: DSDT 000000007f6e3100 0396B (v01 SHUTTL SFM27V20 00001000 MSFT 03000000)
ACPI: FACS 000000007f6e0000 00040
ACPI: MCFG 000000007f6e6b40 0003C (v01 Shuttl Shuttle  42302E31 AWRD 00000000)
ACPI: SLIC 000000007f6e6b80 00176 (v01 Shuttl Shuttle  42302E31 AWRD 00000000)
ACPI: APIC 000000007f6e6a80 00084 (v01 Shuttl Shuttle  42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 007f6e0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 0000c23d80]    TEXT DATA BSS ==> [0000200000 - 0000c23d80]
  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #4 [0000c24000 - 0000c240ae]              BRK ==> [0000c24000 - 0000c240ae]
  #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007f6e0
On node 0 totalpages: 521839
  DMA zone: 56 pages used for memmap
  DMA zone: 2697 pages reserved
  DMA zone: 1230 pages, LIFO batch:0
  DMA32 zone: 7081 pages used for memmap
  DMA32 zone: 510775 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages at ffff880001010000, static data 75936 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 512005
Kernel command line: root=/dev/sda3 video=intelfb:mode=1024x768-32@60
Initializing CPU#0
NR_IRQS:384
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 1595.864 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Memory: 2044048k/2087808k available (6472k kernel code, 452k absent, 42752k reserved, 2428k data, 592k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.72 BogoMIPS (lpj=1595864)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.49 BogoMIPS (lpj=1595747)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x3 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3191.48 BogoMIPS (lpj=1595740)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x1 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3191.36 BogoMIPS (lpj=1595684)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU3: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (12766.07 BogoMIPS).
net_namespace: 1776 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 001f)
pci 0000:00:1f.2: reg 10 io port: [0xf700-0xf707]
pci 0000:00:1f.2: reg 14 io port: [0xf600-0xf603]
pci 0000:00:1f.2: reg 18 io port: [0xf500-0xf507]
pci 0000:00:1f.2: reg 1c io port: [0xf400-0xf403]
pci 0000:00:1f.2: reg 20 io port: [0xf300-0xf30f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:01:00.0: reg 10 io port: [0xce00-0xceff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xfdbff000-0xfdbfffff]
pci 0000:01:00.0: reg 20 64bit mmio: [0xfdcf0000-0xfdcfffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x800-0x87f has been reserved
system 00:01: ioport range 0x290-0x297 has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:07: ioport range 0x400-0x4bf could not be reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0a: iomem range 0xf0000-0xfffff could not be reserved
system 00:0a: iomem range 0x7f6e0000-0x7f6fffff could not be reserved
system 00:0a: iomem range 0x0-0x9ffff could not be reserved
system 00:0a: iomem range 0x100000-0x7f6dffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfed13000-0xfed1dfff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
pci 0000:00:1c.0:   MEM window: 0xfdb00000-0xfdbfffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
pci 0000:00:1e.0:   MEM window: 0xfde00000-0xfdefffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfdb00000-0xfdbfffff]
pci_bus 0000:01: resource 2 pref mem [0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
kvm: no hardware support
Microcode Update Driver: v2.00 <[e-mail]>, Peter Oruba
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM (built Jul 21 2009 20:42:10) installed
FS-Cache: Netfs 'nfs' registered for caching
fuse init (API version 7.11)
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 3993
alg: No test for stdrng (krng)
alg: No test for stdrng (ansi_cprng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x000b
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c1
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c1
pci 0000:00:1d.2: Performing full reset
pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x00c1
pci 0000:00:1d.3: Performing full reset
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
Non-volatile memory driver v1.3
intel_rng: FWH not detected
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945G Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ipmi message handler version 39.2
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
uvesafb: Intel Corporation, Intel(r) 82945G Chipset Family Graphics Controller, Hardware Version 0.0, OEM: Intel(r) 82945G Chipset Family Graphics Chip Accelerated VGA BIOS, VBE v3.0
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 62 Hz, hf = 70 kHz, clk = 150 MHz
uvesafb: scrolling: redraw
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 0
Console: switching to colour frame buffer device 80x30
uvesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010280000, using 7872k, total 7872k
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor ACPI_CPU:00: registered as cooling_device1
processor ACPI_CPU:01: registered as cooling_device2
processor ACPI_CPU:02: registered as cooling_device3
processor ACPI_CPU:03: registered as cooling_device4
ACPI Error (psargs-0359): [\_SB_.PCI0.SBUS.SRDB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\RTMP] (Node ffff88007f0166c0), AE_NOT_FOUND
ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node ffff88007f016900), AE_NOT_FOUND
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
intelfb: Version 0.9.6
intelfb: Cannot reserve FB region.
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
usbcore: registered new interface driver ub
Loading iSCSI transport class v2.0-870.
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 25 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc2000004c000, 00:30:1b:bd:fd:1f, XID 3c4000c0 IRQ 25
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: reset command 080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30-gentoo-r3 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: uevent
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
usb usb2: default language 0x0409
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb3: default language 0x0409
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: uevent
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: uevent
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb4: default language 0x0409
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: uevent
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: uevent
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
uhci_hcd 0000:00:1d.3: supports USB remote wakeup
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
usb usb5: default language 0x0409
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: uevent
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: uevent
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Linux video capture interface: v2.00
coretemp: Unknown CPU model 1c
coretemp: Unknown CPU model 1c
coretemp: Unknown CPU model 1c
coretemp: Unknown CPU model 1c
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
EDAC MC: Ver: 2.1.0 Jul 21 2009
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.20.
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1: status 0501 change 0001
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2: status 0501 change 0001
ALSA device list:
  No soundcards found.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
NET: Registered protocol family 17
ata1.00: ATA-8: WDC WD3200BEKT-00F3T0, 11.01A11, max UDMA/133
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SCTP: Hash tables configured (established 65536 bind 65536)
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
ata1.01: ATAPI: TSSTcorp CDDVDW SN-S083B, SB00, max UDMA/100
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2009-07-26 13:24:09 UTC (1248614649)
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEKT-0 11.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<7>hub 1-0:1.0: state 7 ports 8 chg 0006 evt 0000
hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: CD-ROM            TSSTcorp CDDVDW SN-S083B  SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 1 not reset yet, waiting 50ms
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
hub 1-0:1.0: port 2 not reset yet, waiting 50ms
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
md: autorun ...
md: ... autorun DONE.
EXT3-fs: sda3: couldn't mount because of unsupported optional features (240).
EXT2-fs: sda3: couldn't mount because of unsupported optional features (240).
EXT4-fs: barriers enabled
kjournald2 starting: pid 938, dev sda3:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda3 with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 592k freed
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: ep0 maxpacket = 8
usb 2-1: skipped 1 descriptor after interface
usb 2-1: skipped 1 descriptor after interface
usb 2-1: default language 0x0409
usb 2-1: New USB device found, idVendor=046d, idProduct=c529
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Receiver
usb 2-1: Manufacturer: Logitech
usb 2-1: uevent
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb 2-1:1.0: uevent
usbhid 2-1:1.0: usb_probe_interface
usbhid 2-1:1.0: usb_probe_interface - got id
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 17 us
generic-usb 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
usb 2-1: adding 2-1:1.1 (config #1, interface 1)
usb 2-1:1.1: uevent
usbhid 2-1:1.1: usb_probe_interface
usbhid 2-1:1.1: usb_probe_interface - got id
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 1, phase 0, 26 us
drivers/usb/core/file.c: looking for a minor, starting at 96
generic-usb 0003:046D:C529.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb usb3: suspend_rh (auto-stop)
usb usb4: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
usb 2-2: skipped 16 descriptors after interface
usb 2-2: skipped 2 descriptors after interface
usb 2-2: skipped 1 descriptor after endpoint
usb 2-2: skipped 2 descriptors after interface
usb 2-2: skipped 1 descriptor after endpoint
usb 2-2: skipped 2 descriptors after interface
usb 2-2: skipped 1 descriptor after endpoint
usb 2-2: skipped 1 descriptor after interface
usb 2-2: default language 0x0409
usb 2-2: New USB device found, idVendor=0ccd, idProduct=0028
usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-2: Product: USB Audio
usb 2-2: uevent
usb 2-2: usb_probe_device
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: uevent
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: uevent
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: uevent
usb 2-2: adding 2-2:1.3 (config #1, interface 3)
usb 2-2:1.3: uevent
usbhid 2-2:1.3: usb_probe_interface
usbhid 2-2:1.3: usb_probe_interface - got id
input: USB Audio as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.3/input/input4
uhci_hcd 0000:00:1d.0: reserve dev 3 ep83-INT, period 32, phase 16, 13 us
generic-usb 0003:0CCD:0028.0003: input,hidraw2: USB HID v1.00 Device [USB Audio] on usb-0000:00:1d.0-2/input3
drivers/usb/core/inode.c: creating file '003'
hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004
hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
udev: starting version 141
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-1: uevent
usb 2-1:1.0: uevent
usb 2-1:1.1: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.1: uevent
usb 2-2:1.2: uevent
usb 2-2:1.3: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent
usb 2-1:1.0: uevent
usb 2-1:1.1: uevent
usb 2-1: uevent
usb 2-1: uevent
usb 2-1:1.1: uevent
usb 2-1: uevent
usb 2-2:1.3: uevent
usb 2-2: uevent
snd-usb-audio 2-2:1.0: usb_probe_interface
snd-usb-audio 2-2:1.0: usb_probe_interface - got id
usbcore: registered new interface driver snd-usb-audio
hub 4-0:1.0: hub_suspend
usb usb4: bus auto-suspend
usb usb4: suspend_rh
hub 5-0:1.0: hub_suspend
usb usb5: bus auto-suspend
usb usb5: suspend_rh
hub 3-0:1.0: hub_suspend
usb usb3: bus auto-suspend
usb usb3: suspend_rh
EXT4 FS on sda3, internal journal on sda3:8
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend
ehci_hcd 0000:00:1d.7: suspend root hub
Adding 530136k swap on /dev/sda2.  Priority:-1 extents:1 across:530136k 
r8169: eth0: link up
r8169: eth0: link up
eth0: no IPv6 routers present
usb usb2: uevent
usb 2-0:1.0: uevent
usb 2-1: uevent
usb 2-1:1.0: uevent
usb 2-1:1.1: uevent
usb 2-2: uevent
usb 2-2:1.0: uevent
usb 2-2:1.1: uevent
usb 2-2:1.2: uevent
usb 2-2:1.3: uevent
usb usb3: uevent
usb 3-0:1.0: uevent
usb usb4: uevent
usb 4-0:1.0: uevent
usb usb5: uevent
usb 5-0:1.0: uevent
usb usb1: uevent
usb 1-0:1.0: uevent