The complete dmesg output

dmesg.out (text/plain), 42.39 KB, created by Tassilo Horn on 2009-07-23 14:40:40 UTC

root@localhost> dmesg                                          /var/log
Linux version 2.6.30-gentoo-r3 (root@localhost) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.2, pie-10.1.5) ) #1 SMP PREEMPT Sun Jul 19 19:02:27 CEST 2009
Command line: root=/dev/sda3
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
 BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
 BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
 BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
DMI present.
last_pfn = 0x13c000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0C0000000 mask FC0000000 uncachable
  1 base 13C000000 mask FFC000000 uncachable
  2 base 000000000 mask F00000000 write-back
  3 base 100000000 mask FC0000000 write-back
  4 base 0BF700000 mask FFFF00000 uncachable
  5 base 0BF800000 mask FFF800000 uncachable
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf6b0 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000bf6b0000
 0000000000 - 00bf600000 page 2M
 00bf600000 - 00bf6b0000 page 4k
kernel direct mapping tables up to bf6b0000 @ 8000-d000
init_memory_mapping: 0000000100000000-000000013c000000
 0100000000 - 013c000000 page 2M
kernel direct mapping tables up to 13c000000 @ b000-11000
ACPI: RSDP 00000000000f68c0 00024 (v02 LENOVO)
ACPI: XSDT 00000000bf6bb647 00094 (v01 LENOVO TP-7L    00002250  LTP 00000000)
ACPI: FACP 00000000bf6bb700 000F4 (v03 LENOVO TP-7L    00002250 LNVO 00000001)
ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 0/32 [20090320]
ACPI Warning (tbfadt-0562): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20090320]
ACPI: DSDT 00000000bf6bbb1d 10009 (v01 LENOVO TP-7L    00002250 MSFT 03000000)
ACPI: FACS 00000000bf6e4000 00040
ACPI: SSDT 00000000bf6bb8b4 00269 (v01 LENOVO TP-7L    00002250 MSFT 03000000)
ACPI: ECDT 00000000bf6cbb26 00052 (v01 LENOVO TP-7L    00002250 LNVO 00000001)
ACPI: TCPA 00000000bf6cbb78 00032 (v02 LENOVO TP-7L    00002250 LNVO 00000001)
ACPI: APIC 00000000bf6cbbaa 00068 (v01 LENOVO TP-7L    00002250 LNVO 00000001)
ACPI: MCFG 00000000bf6cbc12 0003C (v01 LENOVO TP-7L    00002250 LNVO 00000001)
ACPI: HPET 00000000bf6cbc4e 00038 (v01 LENOVO TP-7L    00002250 LNVO 00000001)
ACPI: SLIC 00000000bf6cbdf0 00176 (v01 LENOVO TP-7L    00002250  LTP 00000000)
ACPI: BOOT 00000000bf6cbf66 00028 (v01 LENOVO TP-7L    00002250  LTP 00000001)
ACPI: ASF! 00000000bf6cbf8e 00072 (v16 LENOVO TP-7L    00002250 PTL  00000001)
ACPI: SSDT 00000000bf6e26d9 0025F (v01 LENOVO TP-7L    00002250 INTL 20050513)
ACPI: SSDT 00000000bf6e2938 000A6 (v01 LENOVO TP-7L    00002250 INTL 20050513)
ACPI: SSDT 00000000bf6e29de 004F7 (v01 LENOVO TP-7L    00002250 INTL 20050513)
ACPI: SSDT 00000000bf6e2ed5 001D8 (v01 LENOVO TP-7L    00002250 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 013c000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00007ce538]    TEXT DATA BSS ==> [0000200000 - 00007ce538]
  #3 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
  #4 [00007cf000 - 00007cf14c]              BRK ==> [00007cf000 - 00007cf14c]
  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #6 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0013c000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009d
    0: 0x00000100 -> 0x000bf6b0
    0: 0x00100000 -> 0x0013c000
On node 0 totalpages: 1029709
  DMA zone: 56 pages used for memmap
  DMA zone: 1591 pages reserved
  DMA zone: 2350 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 765672 pages, LIFO batch:31
  Normal zone: 3360 pages used for memmap
  Normal zone: 242400 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6cc000
PM: Registered nosave memory: 00000000bf6cc000 - 00000000bf700000
PM: Registered nosave memory: 00000000bf700000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880028022000, static data 72964 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1010422
Kernel command line: root=/dev/sda3
Initializing CPU#0
Preemptible RCU implementation.
NR_IRQS:320
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2094.768 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3967240k/5177344k available (3700k kernel code, 1058508k absent, 150672k reserved, 1279k data, 428k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.53 BogoMIPS (lpj=2094768)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4189.28 BogoMIPS (lpj=2094643)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T8100  @ 2.10GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 384552 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (8378.82 BogoMIPS).
net_namespace: 1808 bytes
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f]
pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff]
pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff]
pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10 32bit mmio: [0xf8301000-0xf83017ff]
pci 0000:15:00.1: supports D1 D2
pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:15:00.2: reg 10 32bit mmio: [0xf8301800-0xf83018ff]
pci 0000:15:00.2: supports D1 D2
pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.2: PME# disabled
pci 0000:15:00.3: reg 10 32bit mmio: [0xf8301c00-0xf8301cff]
pci 0000:15:00.3: supports D1 D2
pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.3: PME# disabled
pci 0000:15:00.4: reg 10 32bit mmio: [0xf8302000-0xf83020ff]
pci 0000:15:00.4: supports D1 D2
pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.4: PME# disabled
pci 0000:15:00.5: reg 10 32bit mmio: [0xf8302400-0xf83024ff]
pci 0000:15:00.5: supports D1 D2
pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x7000-0xafff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
pci 0000:00:1c.0:   MEM window: 0xfc000000-0xfdffffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0x3000-0x3fff
pci 0000:00:1c.1:   MEM window: 0xdc000000-0xdf3fffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000dfe00000-0x000000dfefffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x4000-0x4fff
pci 0000:00:1c.2:   MEM window: 0xd8000000-0xd9ffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000dfb00000-0x000000dfbfffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
pci 0000:00:1c.3:   MEM window: 0xd4000000-0xd5ffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000df800000-0x000000df8fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.4:   IO window: 0x6000-0x6fff
pci 0000:00:1c.4:   MEM window: 0xd0000000-0xd1ffffff
pci 0000:00:1c.4:   PREFETCH window: 0x000000df500000-0x000000df5fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0:   IO window: 0x007000-0x0070ff
pci 0000:15:00.0:   IO window: 0x007400-0x0074ff
pci 0000:15:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:15:00.0:   MEM window: 0xc4000000-0xc7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0:   IO window: 0x7000-0xafff
pci 0000:00:1e.0:   MEM window: 0xf8300000-0xfbffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff]
pci_bus 0000:03: resource 0 io:  [0x3000-0x3fff]
pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff]
pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff]
pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff]
pci_bus 0000:04: resource 2 pref mem [0xdfb00000-0xdfbfffff]
pci_bus 0000:05: resource 0 io:  [0x5000-0x5fff]
pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff]
pci_bus 0000:05: resource 2 pref mem [0xdf800000-0xdf8fffff]
pci_bus 0000:0d: resource 0 io:  [0x6000-0x6fff]
pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff]
pci_bus 0000:0d: resource 2 pref mem [0xdf500000-0xdf5fffff]
pci_bus 0000:15: resource 0 io:  [0x7000-0xafff]
pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff]
pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io:  [0x7000-0x70ff]
pci_bus 0000:16: resource 1 io:  [0x7400-0x74ff]
pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
msgmni has been set to 7750
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
acpi device:03: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input0
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 29
ata2: DUMMY
ata3: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
ata4.00: configured for UDMA/33
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:86:52:b0:a9
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: HITACHI HTS542516K9SA00, BBCZC3HP, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54251 BBCZ PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ata5: port disabled. ignoring.
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
EXT4-fs: barriers enabled
kjournald2 starting: pid 528, dev sda3:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda3 with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
Freeing unused kernel memory: 428k freed
NET: Registered protocol family 1
udev: starting version 141
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button [SLPB]
ACPI: AC Adapter [AC] (on-line)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (48 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (43 C)
ACPI: SSDT 00000000bf6e1b32 002C4 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e1e7b 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
Monitor-Mwait will be used to enter C-1 state
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Monitor-Mwait will be used to enter C-2 state
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61, model 64669YG
usbcore: registered new device driver usb
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 00000000bf6e1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 00000000bf6e1df6 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: Battery Slot [BAT0] (battery present)
thinkpad_acpi: ACPI backlight control delay disabled
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
cfg80211: Calling CRDA to update world regulatory domain
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.30-gentoo-r3 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.30-gentoo-r3 ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.30-gentoo-r3 ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:15:00.2: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
iwlagn 0000:03:00.0: irq 31 for MSI/MSI-X
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
HDA Intel 0000:00:1b.0: setting latency timer to 64
phy0: Selected rate control algorithm 'iwl-agn-rs'
usb 6-4: new high speed USB device using ehci_hcd and address 3
usb 6-4: New USB device found, idVendor=04b3, idProduct=4486
usb 6-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 6-4: configuration #1 chosen from 1 choice
hub 6-4:1.0: USB hub found
hub 6-4:1.0: 7 ports detected
firewire_core: created device fw0: GUID 00061b032a30115c, S400
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
Clocksource tsc unstable (delta = -213450315 ns)
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: New USB device found, idVendor=0483, idProduct=2016
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Biometric Coprocessor
usb 1-2: Manufacturer: STMicroelectronics
usb 1-2: configuration #1 chosen from 1 choice
fuse init (API version 7.11)
usb 3-1: new low speed USB device using uhci_hcd and address 2
EXT4 FS on sda3, internal journal on sda3:8
usb 3-1: New USB device found, idVendor=04b3, idProduct=3107
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1: configuration #1 chosen from 1 choice
usb 6-4.4: new high speed USB device using ehci_hcd and address 4
input: HID 04b3:3107 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input9
generic-usb 0003:04B3:3107.0001: input: USB HID v11.10 Mouse [HID 04b3:3107] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usb 6-4.4: New USB device found, idVendor=05e3, idProduct=0608
usb 6-4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-4.4: Product: USB2.0 Hub
usb 6-4.4: configuration #1 chosen from 1 choice
hub 6-4.4:1.0: USB hub found
hub 6-4.4:1.0: 4 ports detected
usb 6-4.4.4: new low speed USB device using ehci_hcd and address 5
usb 6-4.4.4: New USB device found, idVendor=04d9, idProduct=2013
usb 6-4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4.4.4: Product: USB Keyboard
usb 6-4.4.4: Manufacturer:  
usb 6-4.4.4: configuration #1 chosen from 1 choice
input:   USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb6/6-4/6-4.4/6-4.4.4/6-4.4.4:1.0/input/input10
generic-usb 0003:04D9:2013.0002: input: USB HID v1.00 Keyboard [  USB Keyboard] on usb-0000:00:1a.7-4.4.4/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb6/6-4/6-4.4/6-4.4.4/6-4.4.4:1.1/input/input11
generic-usb 0003:04D9:2013.0003: input: USB HID v1.00 Device [  USB Keyboard] on usb-0000:00:1a.7-4.4.4/input1
Adding 6297472k swap on /dev/sda2.  Priority:-1 extents:1 across:6297472k 
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:03:52:b3:ae:82
wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
wlan0: authenticate with AP 00:03:52:b3:ae:82
wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
wlan0: authenticate with AP 00:03:52:b3:ae:82
wlan0: authenticate with AP 00:03:52:b3:ae:82
wlan0: authenticated
wlan0: associate with AP 00:03:52:b3:ae:82
wlan0: RX AssocResp from 00:03:52:b3:ae:82 (capab=0x811 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Intel AES-NI instructions are not detected.
eth0: no IPv6 routers present
wlan0: authenticate with AP 00:03:52:5b:60:92
wlan0: authenticated
wlan0: associate with AP 00:03:52:5b:60:92
wlan0: RX ReassocResp from 00:03:52:5b:60:92 (capab=0xc31 status=0 aid=1)
wlan0: associated
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: deauthenticating by local choice (reason=3)
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: direct probe to AP 00:03:52:b3:ae:82 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:03:52:b3:ae:82
wlan0: authenticated
wlan0: associate with AP 00:03:52:b3:ae:82
wlan0: RX AssocResp from 00:03:52:b3:ae:82 (capab=0x811 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: disassociating by local choice (reason=3)
wlan0: no IPv6 routers present
eth0: no IPv6 routers present
wlan0: authenticate with AP 00:03:52:5b:60:92
wlan0: authenticated
wlan0: associate with AP 00:03:52:5b:60:92
wlan0: RX AssocResp from 00:03:52:5b:60:92 (capab=0xc31 status=0 aid=1)
wlan0: associated
mtrr: no MTRR for e0000000,10000000 found
mtrr: no MTRR for e0000000,10000000 found
mtrr: no MTRR for e0000000,10000000 found
mtrr: no MTRR for e0000000,10000000 found
mtrr: no MTRR for e0000000,10000000 found
CE: hpet increasing min_delta_ns to 15000 nsec