modprobe.conf

modprobe.conf (text/plain), 7.55 KB, created by Martin Mokrejš on 2009-06-20 19:55:46 UTC

### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modprobe.d and read
# the manpage for update-modules(8).
#
alias char-major-10-198 sheep_net

### update-modules: start processing /etc/modprobe.d/aliases
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-175	agpgart
alias char-major-10-200	tun
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0	loop_gen
alias loop-xfer-3	loop_fish2
alias loop-xfer-gen-10	loop_gen
alias cipher-2		des
alias cipher-3		fish2
alias cipher-4		blowfish
alias cipher-6		idea
alias cipher-7		serp6f
alias cipher-8		mars6
alias cipher-11		rc62
alias cipher-15		dfc2
alias cipher-16		rijndael
alias cipher-17		rc5

# Support for i2c and lm_sensors
alias char-major-89    i2c-dev
### update-modules: end processing /etc/modprobe.d/aliases

### update-modules: start processing /etc/modprobe.d/alsa
# Alsa kernel modules' configuration file.

# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##

# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.
options snd cards_limit=2
### update-modules: end processing /etc/modprobe.d/alsa

### update-modules: start processing /etc/modprobe.d/alsa.conf
# Alsa kernel modules' configuration file.

# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##

# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.
options snd cards_limit=1
### update-modules: end processing /etc/modprobe.d/alsa.conf

### update-modules: start processing /etc/modprobe.d/ath_pci
# modules.d configuration file for ATH_PCI
# For more information please read:
#    README


# Configurable module parameters
# ------------------------------
# ieee80211_debug:	Load-time 802.11 debug output enable
# ath_debug:	Load-time driver debug output enable
# intmit:	Enable interference mitigation by default.  Default is 0.
# ratectl:	Rate control algorithm [amrr|minstrel|onoe|sample], defaults to 'sample'
# autocreate:	Create ath device in [sta|ap|wds|adhoc|ahdemo|monitor] mode. defaults to sta, use 'none' to disable
# hal_tpc:	Disables manual per-packet transmit power control and lets this be managed by the HAL.  Default is OFF.
# rfkill:	Enable/disable RFKILL capability.  Default is 0.
# xchanmode:	Enable/disable extended channel mode.
# outdoor:	Enable/disable outdoor use.  Default is 0.
# maxvaps:	Maximum VAPs.  Default is 4.
# countrycode:	Override default country code.  Default is 0.

### update-modules: end processing /etc/modprobe.d/ath_pci

### update-modules: start processing /etc/modprobe.d/blacklist
# This file lists modules which will not be loaded by udev,
# not at coldplugging and not on hotplug events.

# Add your own entries to this file
# in the format "blacklist <name of module>"

# Some examples:
# evbug is a debug tool and should be loaded explicitly
blacklist evbug

# Autoloading eth1394 most of the time re-orders your network
# interfaces, and with buggy kernel 2.6.21, udev persistent-net
# is not able to rename these devices, so you get eth?_rename devices
# plus an exceeded 30sec boot timeout
blacklist eth1394

# You probably want this to not get the console beep loud on every tab :)
#blacklist pcspkr

# these drivers are very simple, the HID drivers are usually preferred
#blacklist usbmouse
#blacklist usbkbd

# Sometimes loading a framebuffer driver at boot gets the console black
#install pci:v*d*sv*sd*bc03sc*i* /bin/true

# "Marking TSC unstable due to: TSC halts in idle"
# I bet you have a wireless card on your laptop. Try blacklisting its module in /etc/modprobe.d/blacklist and load it "manually" in /etc/rc.d/rc.modules.
### update-modules: end processing /etc/modprobe.d/blacklist

### update-modules: start processing /etc/modprobe.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### update-modules: end processing /etc/modprobe.d/i386

### update-modules: start processing /etc/modprobe.d/pnp-aliases
# /etc/modprobe.d/pnp-aliases
#
# These aliases are used by this udev-rule:
# SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
#
# They should help to autoload drivers used by various pnp-devices
# (if not blacklisted somewhere else)
#
alias pnp:dPNP0510 irtty-sir
alias pnp:dPNP0511 irtty-sir
alias pnp:dPNP0700 floppy
alias pnp:dPNP0800 pcspkr
alias pnp:dPNP0b00 rtc
alias pnp:dPNP0303 atkbd
alias pnp:dPNP0f13 psmouse
alias pnp:dPNPb02f analog

### update-modules: end processing /etc/modprobe.d/pnp-aliases

### update-modules: start processing /etc/modprobe.d/ppp.conf
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-13	n_hdlc
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-18	ppp_mppe
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate
alias net-pf-24		pppoe
### update-modules: end processing /etc/modprobe.d/ppp.conf

### update-modules: start processing /etc/modprobe.d/slmodem
blacklist slusb
blacklist slamr
# blacklist snd-intel8x0m
# slmodem 2.9.x kernel modules configuration file

alias char-major-242 slamr
alias char-major-243 slusb
### update-modules: end processing /etc/modprobe.d/slmodem