Attachment 187060 Details for Bug 264599 – dmesg for gentoo-sources-2.26.9

dmesg for gentoo-sources-2.26.9

dmesg_2.26.9.txt (text/plain), 42.06 KB, created by TeF on 2009-04-02 10:39:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: TeF

Created: 2009-04-02 10:39:27 UTC

Size: 42.06 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.29-gentoo (root@Gentop) (gcc version 4.3.3 (Gentoo 4.3.3-r2 p1.1, pie-10.1.5) ) #3 SMP Thu Apr 2 07:32:30 CST 2009
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   NSC Geode by NSC
>[    0.000000]   Cyrix CyrixInstead
>[    0.000000]   Centaur CentaurHauls
>[    0.000000]   Transmeta GenuineTMx86
>[    0.000000]   Transmeta TransmetaCPU
>[    0.000000]   UMC UMC UMC UMC
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
>[    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>[    0.000000] Malformed early option 'acpi'
>[    0.000000] DMI 2.3 present.
>[    0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
>[    0.000000] ACPI: RSDP 000FA3C0, 0014 (r0 AMI   )
>[    0.000000] ACPI: RSDT 7FFF0000, 0030 (r1 LENOVO TC-03          10 MSFT       97)
>[    0.000000] ACPI Warning (tbutils-0242): Incorrect checksum in table [RSDT] - 6B, should be 9A [20081204]
>[    0.000000] ACPI: FACP 7FFF0030, 0081 (r1 AMIINT INTEL865       11 MSFT       97)
>[    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>[    0.000000] ACPI: DSDT 7FFF0120, 375D (r1  INTEL    I865G     1000 MSFT  100000D)
>[    0.000000] ACPI: FACS 7FFF8000, 0040
>[    0.000000] ACPI: APIC 7FFF00C0, 005C (r1 AMIINT INTEL865        9 MSFT       97)
>[    0.000000] ACPI: SLIC FFF820BA, 0176 (r1 LENOVO TC-03     1000711 MSFT       97)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 1159MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 00000000 - 377fe000
>[    0.000000]   bootmap 00008000 - 0000ef00
>[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>[    0.000000]   #3 [0000200000 - 0000845dc4]    TEXT DATA BSS ==> [0000200000 - 0000845dc4]
>[    0.000000]   #4 [0000846000 - 000084a000]    INIT_PG_TABLE ==> [0000846000 - 000084a000]
>[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>[    0.000000]   #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>[    0.000000] found SMP MP-table at [c00fc120] 000fc120
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x000377fe
>[    0.000000]   HighMem  0x000377fe -> 0x0007fff0
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[2] active PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x0007fff0
>[    0.000000] On node 0 totalpages: 524175
>[    0.000000] free_area_init_node: node 0, pgdat c0744780, node_mem_map c1000000
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1744 pages used for memmap
>[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 2320 pages used for memmap
>[    0.000000]   HighMem zone: 294626 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 24
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>[    0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Allocating 36864 bytes of per cpu data
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520079
>[    0.000000] Kernel command line: root=/dev/sda8 ro acpi=on apm=off irqpoll splash=silent,fadein,theme:emerge-world video=radeonfb:1024x768-32@75 quiet CONSOLE=/dev/tty1 initrd=/boot/fbsplash-livecd-2007.0-1024x768
>[    0.000000] Misrouted IRQ fixup and polling support enabled
>[    0.000000] This may significantly impact system performance
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 2666.557 MHz processor.
>[    0.000999] Console: colour VGA+ 80x25
>[    0.000999] console [tty0] enabled
>[    0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000999] Memory: 2071964k/2097088k available (3599k kernel code, 23824k reserved, 1912k data, 360k init, 1187784k highmem)
>[    0.000999] virtual kernel memory layout:
>[    0.000999]     fixmap  : 0xfff85000 - 0xfffff000   ( 488 kB)
>[    0.000999]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[    0.000999]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>[    0.000999]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>[    0.000999]       .init : 0xc076c000 - 0xc07c6000   ( 360 kB)
>[    0.000999]       .data : 0xc0583ffe - 0xc0762048   (1912 kB)
>[    0.000999]       .text : 0xc0200000 - 0xc0583ffe   (3599 kB)
>[    0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000999] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.001063] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.11 BogoMIPS (lpj=2666557)
>[    0.001089] Security Framework initialized
>[    0.001106] Mount-cache hash table entries: 512
>[    0.001292] Initializing cgroup subsys ns
>[    0.001299] Initializing cgroup subsys cpuacct
>[    0.001325] CPU: Trace cache: 12K uops, L1 D cache: 16K
>[    0.001328] CPU: L2 cache: 256K
>[    0.001331] CPU: Hyper-Threading is disabled
>[    0.001336] using mwait in idle threads.
>[    0.001351] Checking 'hlt' instruction... OK.
>[    0.005569] SMP alternatives: switching to UP code
>[    0.176719] ACPI: Core revision 20081204
>[    0.187361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.197376] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01
>[    0.197969] Brought up 1 CPUs
>[    0.197969] Total of 1 processors activated (5333.11 BogoMIPS).
>[    0.197969] khelper used greatest stack depth: 7560 bytes left
>[    0.197969] net_namespace: 992 bytes
>[    0.197969] Time: 17:52:11  Date: 04/02/09
>[    0.197969] NET: Registered protocol family 16
>[    0.198668] ACPI: bus type pci registered
>[    0.200594] PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
>[    0.200598] PCI: Using configuration type 1 for base access
>[    0.202205] khelper used greatest stack depth: 7280 bytes left
>[    0.210688] bio: create slab <bio-0> at 0
>[    0.211587] ACPI: EC: Look up EC in DSDT
>[    0.218530] ACPI: Interpreter enabled
>[    0.218541] ACPI: (supports S0 S1 S4 S5)
>[    0.218569] ACPI: Using IOAPIC for interrupt routing
>[    0.227152] ACPI: No dock devices found.
>[    0.227185] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[    0.227331] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
>[    0.227490] pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
>[    0.227546] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
>[    0.227603] pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
>[    0.227659] pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f]
>[    0.227722] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffeffc00-0xffefffff]
>[    0.227783] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.227789] pci 0000:00:1d.7: PME# disabled
>[    0.227881] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>[    0.227888] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>[    0.227893] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO
>[    0.227917] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>[    0.227924] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>[    0.227931] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>[    0.227938] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>[    0.227945] pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
>[    0.228013] pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f]
>[    0.228080] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
>[    0.228088] pci 0000:01:00.0: reg 14 io port: [0xb800-0xb8ff]
>[    0.228094] pci 0000:01:00.0: reg 18 32bit mmio: [0xffcf0000-0xffcfffff]
>[    0.228113] pci 0000:01:00.0: reg 30 32bit mmio: [0xffcc0000-0xffcdffff]
>[    0.228136] pci 0000:01:00.0: supports D1 D2
>[    0.228166] pci 0000:01:00.1: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
>[    0.228173] pci 0000:01:00.1: reg 14 32bit mmio: [0xffce0000-0xffceffff]
>[    0.228209] pci 0000:01:00.1: supports D1 D2
>[    0.228255] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
>[    0.228260] pci 0000:00:01.0: bridge 32bit mmio: [0xffc00000-0xffcfffff]
>[    0.228265] pci 0000:00:01.0: bridge 32bit mmio pref: [0xb7f00000-0xf7efffff]
>[    0.228306] pci 0000:02:05.0: reg 10 io port: [0xcc00-0xcc3f]
>[    0.228352] pci 0000:02:05.0: supports D1 D2
>[    0.228391] pci 0000:02:0b.0: reg 10 io port: [0xc800-0xc8ff]
>[    0.228399] pci 0000:02:0b.0: reg 14 32bit mmio: [0xffdfff00-0xffdfffff]
>[    0.228425] pci 0000:02:0b.0: reg 30 32bit mmio: [0xffde0000-0xffdeffff]
>[    0.228445] pci 0000:02:0b.0: supports D1 D2
>[    0.228447] pci 0000:02:0b.0: PME# supported from D1 D2 D3hot D3cold
>[    0.228452] pci 0000:02:0b.0: PME# disabled
>[    0.228483] pci 0000:00:1e.0: transparent bridge
>[    0.228488] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
>[    0.228493] pci 0000:00:1e.0: bridge 32bit mmio: [0xffd00000-0xffdfffff]
>[    0.228509] pci_bus 0000:00: on NUMA node 0
>[    0.228523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.228691] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
>[    0.232811] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>[    0.233017] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12 14 15)
>[    0.233191] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>[    0.233419] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
>[    0.233578] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>[    0.233736] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>[    0.233893] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>[    0.234132] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *12 14 15)
>[    0.234376] ACPI: Power Resource [URP1] (off)
>[    0.234431] ACPI: Power Resource [URP2] (off)
>[    0.234484] ACPI: Power Resource [FDDP] (off)
>[    0.234535] ACPI: Power Resource [LPTP] (off)
>[    0.235777] SCSI subsystem initialized
>[    0.235843] libata version 3.00 loaded.
>[    0.236145] usbcore: registered new interface driver usbfs
>[    0.236230] usbcore: registered new interface driver hub
>[    0.236330] usbcore: registered new device driver usb
>[    0.237001] PCI: Using ACPI for IRQ routing
>[    0.237315] NetLabel: Initializing
>[    0.237318] NetLabel:  domain hash size = 128
>[    0.237321] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.237337] NetLabel:  unlabeled traffic allowed by default
>[    0.237444] hpet clockevent registered
>[    0.237448] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.237455] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.237462] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.239761] pnp: PnP ACPI init
>[    0.239778] ACPI: bus type pnp registered
>[    0.244936] pnp: PnP ACPI: found 11 devices
>[    0.244941] ACPI: ACPI bus type pnp unregistered
>[    0.244975] system 00:01: ioport range 0x290-0x297 has been reserved
>[    0.244979] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
>[    0.244983] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>[    0.244986] system 00:01: ioport range 0x400-0x43f has been reserved
>[    0.244991] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>[    0.244995] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
>[    0.279724] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>[    0.279730] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
>[    0.279736] pci 0000:00:01.0:   MEM window: 0xffc00000-0xffcfffff
>[    0.279742] pci 0000:00:01.0:   PREFETCH window: 0x000000b7f00000-0x000000f7efffff
>[    0.279751] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>[    0.279755] pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
>[    0.279761] pci 0000:00:1e.0:   MEM window: 0xffd00000-0xffdfffff
>[    0.279767] pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x000000880fffff
>[    0.279788] pci 0000:00:1e.0: setting latency timer to 64
>[    0.279794] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>[    0.279797] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>[    0.279800] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
>[    0.279803] pci_bus 0000:01: resource 1 mem: [0xffc00000-0xffcfffff]
>[    0.279806] pci_bus 0000:01: resource 2 mem: [0xb7f00000-0xf7efffff]
>[    0.279808] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
>[    0.279811] pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
>[    0.279814] pci_bus 0000:02: resource 1 mem: [0xffd00000-0xffdfffff]
>[    0.279817] pci_bus 0000:02: resource 2 mem: [0x88000000-0x880fffff]
>[    0.279820] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>[    0.279823] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>[    0.279873] NET: Registered protocol family 2
>[    0.280003] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.280436] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.281346] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.281820] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.281826] TCP reno registered
>[    0.282008] NET: Registered protocol family 1
>[    0.283739] audit: initializing netlink socket (disabled)
>[    0.283758] type=2000 audit(1238694731.282:1): initialized
>[    0.293513] highmem bounce pool size: 64 pages
>[    0.293521] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.297816] VFS: Disk quotas dquot_6.5.2
>[    0.297987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.299009] NTFS driver 2.1.29 [Flags: R/W].
>[    0.299346] fuse init (API version 7.11)
>[    0.299674] msgmni has been set to 1728
>[    0.300029] cryptomgr_test used greatest stack depth: 7148 bytes left
>[    0.300886] cryptomgr_test used greatest stack depth: 6824 bytes left
>[    0.301149] alg: No test for stdrng (krng)
>[    0.301419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.301425] io scheduler noop registered
>[    0.301427] io scheduler anticipatory registered
>[    0.301430] io scheduler deadline registered
>[    0.301460] io scheduler cfq registered (default)
>[    0.301482] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
>[    0.301485] pci 0000:00:1d.0: Performing full reset
>[    0.301502] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
>[    0.301504] pci 0000:00:1d.1: Performing full reset
>[    0.301519] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
>[    0.301522] pci 0000:00:1d.2: Performing full reset
>[    0.301537] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
>[    0.301539] pci 0000:00:1d.3: Performing full reset
>[    0.301596] pci 0000:01:00.0: Boot video device
>[    0.308495] intel_rng: FWH not detected
>[    0.308687] radeonfb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    0.309287] radeonfb: Found Intel x86 BIOS ROM Image
>[    0.309292] radeonfb: Retrieved PLL infos from BIOS
>[    0.309296] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
>[    0.309299] radeonfb: PLL min 20000 max 40000
>[    0.382998] i2c-adapter i2c-1: unable to read EDID block.
>[    0.499982] i2c-adapter i2c-1: unable to read EDID block.
>[    0.616968] i2c-adapter i2c-1: unable to read EDID block.
>[    0.737907] Switched to high resolution mode on CPU 0
>[    1.010013] radeonfb: Monitor 1 type CRT found
>[    1.010016] radeonfb: EDID probed
>[    1.010018] radeonfb: Monitor 2 type no found
>[    1.010219] fbcon: ATI Radeon 4153 (fb0) is primary device
>[    1.099787] Console: switching to colour frame buffer device 128x48
>[    1.171849] radeonfb (0000:01:00.0): ATI Radeon 4153 "AS"
>[    1.172486] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>[    1.172496] ACPI: Power Button (FF) [PWRF]
>[    1.172641] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>[    1.172649] ACPI: Power Button (CM) [PWRB]
>[    1.173173] processor ACPI_CPU:00: registered as cooling_device0
>[    1.173179] ACPI: Processor [CPU1] (supports 8 throttling states)
>[    1.176123] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.420106] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.420994] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.424290] brd: module loaded
>[    1.425851] loop: module loaded
>[    1.425863] PPP generic driver version 2.4.2
>[    1.426071] PPP Deflate Compression module registered
>[    1.426076] PPP BSD Compression module registered
>[    1.426079] NET: Registered protocol family 24
>[    1.426098] PPPoL2TP kernel driver, V1.0
>[    1.426101] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
>[    1.426104] CSLIP: code copyright 1989 Regents of the University of California.
>[    1.426129] 8139too Fast Ethernet driver 0.9.28
>[    1.426154] 8139too 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[    1.426788] eth0: RealTek RTL8139 at 0xf801ef00, 00:11:09:dd:8d:11, IRQ 23
>[    1.426792] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>[    1.426889] console [netcon0] enabled
>[    1.426894] netconsole: network logging started
>[    1.426896] Uniform Multi-Platform E-IDE driver
>[    1.427272] ide-gd driver 1.18
>[    1.427495] Loading iSCSI transport class v2.0-870.
>[    1.427916] Driver 'sd' needs updating - please use bus_type methods
>[    1.427985] Driver 'sr' needs updating - please use bus_type methods
>[    1.428275] ata_piix 0000:00:1f.2: version 2.12
>[    1.428301] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[    1.428308] ata_piix 0000:00:1f.2: MAP [ P0 P1 IDE IDE ]
>[    1.428367] ata_piix 0000:00:1f.2: setting latency timer to 64
>[    1.428457] scsi0 : ata_piix
>[    1.428749] scsi1 : ata_piix
>[    1.431111] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>[    1.431116] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>[    1.586541] ata1.00: ATA-6: WDC WD1200JD-00HBB0, 08.02D08, max UDMA/133
>[    1.586545] ata1.00: 234441648 sectors, multi 16: LBA48 
>[    1.593553] ata1.00: configured for UDMA/133
>[    1.593700] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200JD-00H 08.0 PQ: 0 ANSI: 5
>[    1.594082] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>[    1.594109] sd 0:0:0:0: [sda] Write Protect is off
>[    1.594113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.594151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.594268] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>[    1.594292] sd 0:0:0:0: [sda] Write Protect is off
>[    1.594296] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.594333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.594338]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
>[    1.660233] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.660460] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.814327] ata2.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
>[    1.820235] ata2.00: configured for UDMA/33
>[    1.822489] scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.05 PQ: 0 ANSI: 5
>[    1.825750] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>[    1.825755] Uniform CD-ROM driver Revision: 3.20
>[    1.826082] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.826291] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.826782] usbcore: registered new interface driver usblp
>[    1.826789] Initializing USB Mass Storage driver...
>[    1.826861] usbcore: registered new interface driver usb-storage
>[    1.826868] USB Mass Storage support registered.
>[    1.826939] usbcore: registered new interface driver libusual
>[    1.827137] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.827141] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.827613] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.827917] mice: PS/2 mouse device common for all mice
>[    1.828387] rtc_cmos 00:04: RTC can wake from S4
>[    1.828520] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.828551] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.828661] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>[    1.828668] ACPI: I/O resource 0000:00:1f.3 [0xc00-0xc1f] conflicts with ACPI region SMOV [0xc00-0xc06]
>[    1.828671] ACPI: Device needs an ACPI driver
>[    1.829318] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>[    1.829363] cpuidle: using governor ladder
>[    1.829366] cpuidle: using governor menu
>[    1.829611] No iBFT detected.
>[    1.831555] usbcore: registered new interface driver hiddev
>[    1.831626] usbcore: registered new interface driver usbhid
>[    1.831631] usbhid: v2.6:USB HID core driver
>[    1.831730] Advanced Linux Sound Architecture Driver Version 1.0.18a.
>[    1.832349] ALSA device list:
>[    1.832353]   No soundcards found.
>[    1.832402] Netfilter messages via NETLINK v0.30.
>[    1.832428] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    1.832920] ctnetlink v0.93: registering with nfnetlink.
>[    1.833403] IPv4 over IPv4 tunneling driver
>[    1.833913] GRE over IPv4 tunneling driver
>[    1.834949] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.834993] TCP cubic registered
>[    1.834996] Initializing XFRM netlink socket
>[    1.835564] NET: Registered protocol family 10
>[    1.838067] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    1.838192] IPv6 over IPv4 tunneling driver
>[    1.839447] NET: Registered protocol family 17
>[    1.839788] RPC: Registered udp transport module.
>[    1.839792] RPC: Registered tcp transport module.
>[    1.839844] Using IPI No-Shortcut mode
>[    1.840260] registered taskstats version 1
>[    1.840387]   Magic number: 5:279:895
>[    1.851437] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>[    1.941032] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
>[    1.941562] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
>[    1.941577] ReiserFS: sda8: using ordered data mode
>[    1.947270] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>[    1.948464] ReiserFS: sda8: checking transaction log (sda8)
>[    1.993235] ReiserFS: sda8: Using r5 hash to sort names
>[    2.016254] VFS: Mounted root (reiserfs filesystem) readonly on device 8:8.
>[    2.016624] Freeing unused kernel memory: 360k freed
>[    2.016692] Write protecting the kernel text: 3600k
>[    2.016718] Write protecting the kernel read-only data: 1596k
>[    2.044663] khelper used greatest stack depth: 6196 bytes left
>[    3.135846] init-early.sh used greatest stack depth: 5536 bytes left
>[    5.239648] udev: starting version 140
>[    5.521821] Linux agpgart interface v0.103
>[    5.574366] input: PC Speaker as /devices/platform/pcspkr/input/input3
>[    5.627838] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    5.627843] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>[    5.627897] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>[    5.628041] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    5.628047] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    5.628113] drivers/usb/core/inode.c: creating file 'devices'
>[    5.628120] drivers/usb/core/inode.c: creating file '001'
>[    5.628125] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    5.628134] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>[    5.628139] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>[    5.628166] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    5.632052] ehci_hcd 0000:00:1d.7: debug port 1
>[    5.632060] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>[    5.632063] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    5.632230] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffeffc00
>[    5.632237] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    5.636132] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>[    5.638966] uhci_hcd: USB Universal Host Controller Interface driver
>[    5.642047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    5.642129] usb usb1: default language 0x0409
>[    5.642139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    5.642143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.642147] usb usb1: Product: EHCI Host Controller
>[    5.642149] usb usb1: Manufacturer: Linux 2.6.29-gentoo ehci_hcd
>[    5.642152] usb usb1: SerialNumber: 0000:00:1d.7
>[    5.642254] usb usb1: uevent
>[    5.642278] usb usb1: usb_probe_device
>[    5.642282] usb usb1: configuration #1 chosen from 1 choice
>[    5.642291] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    5.642311] usb 1-0:1.0: uevent
>[    5.642328] hub 1-0:1.0: usb_probe_interface
>[    5.642331] hub 1-0:1.0: usb_probe_interface - got id
>[    5.642334] hub 1-0:1.0: USB hub found
>[    5.642349] hub 1-0:1.0: 8 ports detected
>[    5.642351] hub 1-0:1.0: standalone hub
>[    5.642353] hub 1-0:1.0: no power switching (usb 1.0)
>[    5.642355] hub 1-0:1.0: individual port over-current protection
>[    5.642358] hub 1-0:1.0: power on to power good time: 20ms
>[    5.642364] hub 1-0:1.0: local power source is good
>[    5.642367] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    5.642474] drivers/usb/core/inode.c: creating file '001'
>[    5.642566] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    5.642614] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    5.642619] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    5.642655] drivers/usb/core/inode.c: creating file '002'
>[    5.642662] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    5.642670] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    5.642675] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.642678] uhci_hcd 0000:00:1d.0: Performing full reset
>[    5.642690] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    5.642711] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
>[    5.642760] usb usb2: default language 0x0409
>[    5.642769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.642772] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.642775] usb usb2: Product: UHCI Host Controller
>[    5.642778] usb usb2: Manufacturer: Linux 2.6.29-gentoo uhci_hcd
>[    5.642780] usb usb2: SerialNumber: 0000:00:1d.0
>[    5.642843] usb usb2: uevent
>[    5.642862] usb usb2: usb_probe_device
>[    5.642865] usb usb2: configuration #1 chosen from 1 choice
>[    5.642872] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    5.642896] usb 2-0:1.0: uevent
>[    5.642912] hub 2-0:1.0: usb_probe_interface
>[    5.642915] hub 2-0:1.0: usb_probe_interface - got id
>[    5.642918] hub 2-0:1.0: USB hub found
>[    5.642929] hub 2-0:1.0: 2 ports detected
>[    5.642931] hub 2-0:1.0: standalone hub
>[    5.642933] hub 2-0:1.0: no power switching (usb 1.0)
>[    5.642935] hub 2-0:1.0: individual port over-current protection
>[    5.642938] hub 2-0:1.0: power on to power good time: 2ms
>[    5.642943] hub 2-0:1.0: local power source is good
>[    5.642946] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    5.642998] drivers/usb/core/inode.c: creating file '001'
>[    5.643109] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[    5.643122] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    5.643126] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    5.643158] drivers/usb/core/inode.c: creating file '003'
>[    5.643166] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    5.643173] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    5.643178] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.643181] uhci_hcd 0000:00:1d.1: Performing full reset
>[    5.643193] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    5.643210] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
>[    5.643256] usb usb3: default language 0x0409
>[    5.643265] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.643269] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.643272] usb usb3: Product: UHCI Host Controller
>[    5.643275] usb usb3: Manufacturer: Linux 2.6.29-gentoo uhci_hcd
>[    5.643277] usb usb3: SerialNumber: 0000:00:1d.1
>[    5.643344] usb usb3: uevent
>[    5.643363] usb usb3: usb_probe_device
>[    5.643366] usb usb3: configuration #1 chosen from 1 choice
>[    5.643373] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    5.643392] usb 3-0:1.0: uevent
>[    5.643408] hub 3-0:1.0: usb_probe_interface
>[    5.643410] hub 3-0:1.0: usb_probe_interface - got id
>[    5.643413] hub 3-0:1.0: USB hub found
>[    5.643424] hub 3-0:1.0: 2 ports detected
>[    5.643426] hub 3-0:1.0: standalone hub
>[    5.643428] hub 3-0:1.0: no power switching (usb 1.0)
>[    5.643431] hub 3-0:1.0: individual port over-current protection
>[    5.643434] hub 3-0:1.0: power on to power good time: 2ms
>[    5.643438] hub 3-0:1.0: local power source is good
>[    5.643442] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    5.643493] drivers/usb/core/inode.c: creating file '001'
>[    5.643564] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[    5.643574] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    5.643579] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    5.643608] drivers/usb/core/inode.c: creating file '004'
>[    5.643615] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    5.643622] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    5.643627] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.643630] uhci_hcd 0000:00:1d.2: Performing full reset
>[    5.643642] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    5.643659] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
>[    5.643705] usb usb4: default language 0x0409
>[    5.643714] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.643718] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.643720] usb usb4: Product: UHCI Host Controller
>[    5.643723] usb usb4: Manufacturer: Linux 2.6.29-gentoo uhci_hcd
>[    5.643725] usb usb4: SerialNumber: 0000:00:1d.2
>[    5.643792] usb usb4: uevent
>[    5.643809] usb usb4: usb_probe_device
>[    5.643813] usb usb4: configuration #1 chosen from 1 choice
>[    5.643820] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    5.643840] usb 4-0:1.0: uevent
>[    5.643855] hub 4-0:1.0: usb_probe_interface
>[    5.643858] hub 4-0:1.0: usb_probe_interface - got id
>[    5.643861] hub 4-0:1.0: USB hub found
>[    5.643872] hub 4-0:1.0: 2 ports detected
>[    5.643874] hub 4-0:1.0: standalone hub
>[    5.643876] hub 4-0:1.0: no power switching (usb 1.0)
>[    5.643878] hub 4-0:1.0: individual port over-current protection
>[    5.643881] hub 4-0:1.0: power on to power good time: 2ms
>[    5.643886] hub 4-0:1.0: local power source is good
>[    5.643889] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    5.643942] drivers/usb/core/inode.c: creating file '001'
>[    5.644047] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[    5.644058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[    5.644063] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    5.644103] drivers/usb/core/inode.c: creating file '005'
>[    5.644112] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    5.644119] uhci_hcd 0000:00:1d.3: detected 2 ports
>[    5.644124] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>[    5.644127] uhci_hcd 0000:00:1d.3: Performing full reset
>[    5.644140] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>[    5.644149] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
>[    5.644196] usb usb5: default language 0x0409
>[    5.644205] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    5.644209] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    5.644211] usb usb5: Product: UHCI Host Controller
>[    5.644214] usb usb5: Manufacturer: Linux 2.6.29-gentoo uhci_hcd
>[    5.644216] usb usb5: SerialNumber: 0000:00:1d.3
>[    5.644283] usb usb5: uevent
>[    5.644302] usb usb5: usb_probe_device
>[    5.644306] usb usb5: configuration #1 chosen from 1 choice
>[    5.644313] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    5.644341] usb 5-0:1.0: uevent
>[    5.644357] hub 5-0:1.0: usb_probe_interface
>[    5.644360] hub 5-0:1.0: usb_probe_interface - got id
>[    5.644363] hub 5-0:1.0: USB hub found
>[    5.644374] hub 5-0:1.0: 2 ports detected
>[    5.644377] hub 5-0:1.0: standalone hub
>[    5.644379] hub 5-0:1.0: no power switching (usb 1.0)
>[    5.644381] hub 5-0:1.0: individual port over-current protection
>[    5.644384] hub 5-0:1.0: power on to power good time: 2ms
>[    5.644389] hub 5-0:1.0: local power source is good
>[    5.644391] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    5.644454] drivers/usb/core/inode.c: creating file '001'
>[    5.742092] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
>[    5.742099] hub 1-0:1.0: port 3: status 0501 change 0001
>[    5.742135] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    5.743041] uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00
>[    5.743070] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    5.744109] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    5.771451] agpgart-intel 0000:00:00.0: Intel 865 Chipset
>[    5.775138] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
>[    5.842595] hub 1-0:1.0: state 7 ports 8 chg 0008 evt 0000
>[    5.842611] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>[    5.842622] ehci_hcd 0000:00:1d.7: port 3 low speed --> companion
>[    5.893054] ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
>[    5.893083] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008
>[    5.893094] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    5.893102] uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00
>[    5.893142] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>[    5.925946] EMU10K1_Audigy 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[    5.929045] Audigy2 value: Special config.
>[    5.944656] modprobe used greatest stack depth: 5120 bytes left
>[    6.003071] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>[    6.105051] usb 3-1: new low speed USB device using uhci_hcd and address 2
>[    6.246221] usb 3-1: skipped 1 descriptor after interface
>[    6.251199] usb 3-1: default language 0x0409
>[    6.268204] usb 3-1: New USB device found, idVendor=046d, idProduct=c03d
>[    6.268209] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    6.268213] usb 3-1: Product: USB-PS/2 Optical Mouse
>[    6.268216] usb 3-1: Manufacturer: Logitech
>[    6.268320] usb 3-1: uevent
>[    6.268349] usb 3-1: usb_probe_device
>[    6.268354] usb 3-1: configuration #1 chosen from 1 choice
>[    6.271211] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>[    6.271257] usb 3-1:1.0: uevent
>[    6.271298] usbhid 3-1:1.0: usb_probe_interface
>[    6.271302] usbhid 3-1:1.0: usb_probe_interface - got id
>[    6.284583] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
>[    6.284739] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
>[    6.284804] drivers/usb/core/inode.c: creating file '002'
>[    6.374971] usb 3-1:1.0: uevent
>[    6.375124] usb 3-1: uevent
>[    6.380986] usb 3-1:1.0: uevent
>[    6.381155] usb 3-1: uevent
>[    6.704020] usb usb2: suspend_rh (auto-stop)
>[    6.704042] usb usb4: suspend_rh (auto-stop)
>[    6.704060] usb usb5: suspend_rh (auto-stop)
>[    8.275073] NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
>[    8.323478] NTFS volume version 3.1.
>[    8.323485] NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
>[    8.323490] NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
>[    8.424477] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[    8.444543] NTFS-fs warning (device sda6): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
>[    8.496293] NTFS volume version 3.1.
>[    8.704040] hub 2-0:1.0: hub_suspend
>[    8.704051] usb usb2: bus auto-suspend
>[    8.704055] usb usb2: suspend_rh
>[    8.704071] hub 4-0:1.0: hub_suspend
>[    8.704075] usb usb4: bus auto-suspend
>[    8.704078] usb usb4: suspend_rh
>[    8.704092] hub 5-0:1.0: hub_suspend
>[    8.704097] usb usb5: bus auto-suspend
>[    8.704099] usb usb5: suspend_rh
>[    8.704112] hub 1-0:1.0: hub_suspend
>[    8.704116] usb usb1: bus auto-suspend
>[    8.704119] ehci_hcd 0000:00:1d.7: suspend root hub
>[   12.594543] fbcondecor: console 0 using theme 'emerge-world'
>[   12.891759] fbcondecor: switched decor state to 'on' on console 0
>[   13.245760] fbcondecor: console 1 using theme 'emerge-world'
>[   13.553293] fbcondecor: switched decor state to 'on' on console 1
>[   13.916388] fbcondecor: console 2 using theme 'emerge-world'
>[   14.223469] fbcondecor: switched decor state to 'on' on console 2
>[   14.597631] fbcondecor: console 3 using theme 'emerge-world'
>[   14.894757] fbcondecor: switched decor state to 'on' on console 3
>[   15.257943] fbcondecor: console 4 using theme 'emerge-world'
>[   15.566355] fbcondecor: switched decor state to 'on' on console 4
>[   15.929425] fbcondecor: console 5 using theme 'emerge-world'
>[   16.237248] fbcondecor: switched decor state to 'on' on console 5
>[   18.357900] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>[   22.063863] Adding 2104472k swap on /dev/sda7.  Priority:-1 extents:1 across:2104472k 
>[   24.462442] uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
>[   25.993768] usb usb2: uevent
>[   25.993868] usb 2-0:1.0: uevent
>[   25.994695] usb usb3: uevent
>[   25.994787] usb 3-0:1.0: uevent
>[   25.994945] usb 3-1: uevent
>[   25.995484] usb 3-1:1.0: uevent
>[   25.996888] usb usb4: uevent
>[   25.996983] usb 4-0:1.0: uevent
>[   25.997694] usb usb5: uevent
>[   25.997853] usb 5-0:1.0: uevent
>[   25.998600] usb usb1: uevent
>[   25.998695] usb 1-0:1.0: uevent
>[   29.271015] eth0: no IPv6 routers present
>[   36.906852] fbcondecor: console 0 using theme 'emerge-world'
>[   36.952546] fbcondecor: switched decor state to 'on' on console 0
>[  258.768317] emerge used greatest stack depth: 5076 bytes left
>[  431.558769] rsync used greatest stack depth: 5072 bytes left
>[  498.070466] ebuild.sh used greatest stack depth: 5060 bytes left
>[  636.374373] axel used greatest stack depth: 4864 bytes left
>[  741.312388] [drm] Initialized drm 1.1.0 20060810
>[  741.332000] [drm] Initialized radeon 1.29.0 20080613 on minor 0
>[  741.332505] [drm] Used old pci detect: framebuffer loaded
>[  741.566930] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
>[  741.566956] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
>[  741.566988] radeonfb 0000:01:00.0: putting AGP V3 device into 8x mode
>[  741.797152] [drm:radeon_do_init_cp] *ERROR* could not find ioremap agp regions!
>[  742.137086] X:26760 conflicting memory types e0000000-e8000000 write-combining<->uncached-minus
>[  742.137092] reserve_memtype failed 0xe0000000-0xe8000000, track write-combining, req write-combining
>[  742.894495] X:26760 conflicting memory types e0000000-e8000000 write-combining<->uncached-minus
>[  742.894501] reserve_memtype failed 0xe0000000-0xe8000000, track write-combining, req write-combining
>[  743.393610] X:26760 conflicting memory types e0000000-e8000000 write-combining<->uncached-minus
>[  743.393616] reserve_memtype failed 0xe0000000-0xe8000000, track write-combining, req write-combining
>[  743.399772] X:26797 freeing invalid memtype e0000000-e8000000

Actions: View

Attachments on bug 264599: 187060 | 187061