Attachment 182936 Details for Bug 257952 – output of lsusb -v with iomega drive attached

output of lsusb -v with iomega drive attached

lsusb-v (text/plain), 16.91 KB, created by Javier on 2009-02-23 19:31:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Javier

Created: 2009-02-23 19:31:36 UTC

Size: 16.91 KB

patch

obsolete

>
>Bus 004 Device 001: ID 1d6b:0001  
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b 
>  idProduct          0x0001 
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.27-gentoo-r8 uhci_hcd
>  iProduct                2 UHCI Host Controller
>  iSerial                 1 0000:00:1d.3
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             2
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood        1 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>Bus 005 Device 012: ID 059b:0179 Iomega Corp. 
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0        64
>  idVendor           0x059b Iomega Corp.
>  idProduct          0x0179 
>  bcdDevice            0.01
>  iManufacturer           1 IOMEGA
>  iProduct                2 Portable Hard Drive
>  iSerial                 3 79000000000040D9
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           32
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xc0
>      Self Powered
>    MaxPower                2mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           2
>      bInterfaceClass         8 Mass Storage
>      bInterfaceSubClass      6 SCSI
>      bInterfaceProtocol     80 Bulk (Zip)
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x01  EP 1 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x82  EP 2 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>Device Qualifier (for other device speed):
>  bLength                10
>  bDescriptorType         6
>  bcdUSB               2.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0        64
>  bNumConfigurations      1
>Device Status:     0x0000
>  (Bus Powered)
>
>Bus 005 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         1 Single TT
>  bMaxPacketSize0        64
>  idVendor           0x0409 NEC Corp.
>  idProduct          0x0058 HighSpeed Hub
>  bcdDevice            1.00
>  iManufacturer           1 NEC Corporation
>  iProduct                2 USB2.0 Hub Controller
>  iSerial                 0 
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower              100mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0001  1x 1 bytes
>        bInterval              12
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             4
>  wHubCharacteristic 0x00a9
>    Per-port power switching
>    Per-port overcurrent protection
>    TT think time 16 FS bits
>    Port indicators
>  bPwrOn2PwrGood       50 * 2 milli seconds
>  bHubContrCurrent    100 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>   Port 3: 0000.0100 power
>   Port 4: 0000.0100 power
>Device Qualifier (for other device speed):
>  bLength                10
>  bDescriptorType         6
>  bcdUSB               2.00
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  bNumConfigurations      1
>Device Status:     0x0001
>  Self Powered
>
>Bus 005 Device 001: ID 1d6b:0002  
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b 
>  idProduct          0x0002 
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.27-gentoo-r8 ehci_hcd
>  iProduct                2 EHCI Host Controller
>  iSerial                 1 0000:00:1d.7
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0004  1x 4 bytes
>        bInterval              12
>Hub Descriptor:
>  bLength              11
>  bDescriptorType      41
>  nNbrPorts             8
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood       10 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00 0x00
>  PortPwrCtrlMask    0xff 0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>   Port 3: 0000.0100 power
>   Port 4: 0000.0100 power
>   Port 5: 0000.0503 highspeed power enable connect
>   Port 6: 0000.0100 power
>   Port 7: 0000.0503 highspeed power enable connect
>   Port 8: 0000.0100 power
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>Bus 003 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply 
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0 
>  bDeviceProtocol         0 
>  bMaxPacketSize0         8
>  idVendor           0x051d American Power Conversion
>  idProduct          0x0002 Uninterruptible Power Supply 
>  bcdDevice            1.06
>  iManufacturer           3 American Power Conversion
>  iProduct                1 Back-UPS BR  800 FW:9.o2 .I USB FW:o2 
>  iSerial                 2 QB0344343333  
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           34
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xa0
>      (Bus Powered)
>      Remote Wakeup
>    MaxPower               24mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         3 Human Interface Device
>      bInterfaceSubClass      0 No Subclass
>      bInterfaceProtocol      0 None
>      iInterface              0 
>        HID Device Descriptor:
>          bLength                 9
>          bDescriptorType        33
>          bcdHID               1.10
>          bCountryCode           33 US
>          bNumDescriptors         1
>          bDescriptorType        34 Report
>          wDescriptorLength    1217
>         Report Descriptors: 
>           ** UNAVAILABLE **
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0006  1x 6 bytes
>        bInterval              10
>Device Status:     0x0000
>  (Bus Powered)
>
>Bus 003 Device 001: ID 1d6b:0001  
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b 
>  idProduct          0x0001 
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.27-gentoo-r8 uhci_hcd
>  iProduct                2 UHCI Host Controller
>  iSerial                 1 0000:00:1d.2
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             2
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood        1 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0303 lowspeed power enable connect
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>Bus 002 Device 001: ID 1d6b:0001  
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b 
>  idProduct          0x0001 
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.27-gentoo-r8 uhci_hcd
>  iProduct                2 UHCI Host Controller
>  iSerial                 1 0000:00:1d.1
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             2
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood        1 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled
>
>Bus 001 Device 001: ID 1d6b:0001  
>Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               1.10
>  bDeviceClass            9 Hub
>  bDeviceSubClass         0 Unused
>  bDeviceProtocol         0 Full speed (or root) hub
>  bMaxPacketSize0        64
>  idVendor           0x1d6b 
>  idProduct          0x0001 
>  bcdDevice            2.06
>  iManufacturer           3 Linux 2.6.27-gentoo-r8 uhci_hcd
>  iProduct                2 UHCI Host Controller
>  iSerial                 1 0000:00:1d.0
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           25
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          0 
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                0mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           1
>      bInterfaceClass         9 Hub
>      bInterfaceSubClass      0 Unused
>      bInterfaceProtocol      0 Full speed (or root) hub
>      iInterface              0 
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0002  1x 2 bytes
>        bInterval             255
>Hub Descriptor:
>  bLength               9
>  bDescriptorType      41
>  nNbrPorts             2
>  wHubCharacteristic 0x000a
>    No power switching (usb 1.0)
>    Per-port overcurrent protection
>  bPwrOn2PwrGood        1 * 2 milli seconds
>  bHubContrCurrent      0 milli Ampere
>  DeviceRemovable    0x00
>  PortPwrCtrlMask    0xff
> Hub Port Status:
>   Port 1: 0000.0100 power
>   Port 2: 0000.0100 power
>Device Status:     0x0003
>  Self Powered
>  Remote Wakeup Enabled

Actions: View

Attachments on bug 257952: 181197 | 181199 | 182934 | 182936 | 183019