dmesg output under 2.6.28-gentoo (tuners compiled as modules)

dmesg.2.6.28-1 (text/plain), 27.98 KB, created by Nick Soveiko on 2009-01-23 06:25:35 UTC

BIOS EBDA/lowmem at: 0009fc00/0009f800
Linux version 2.6.28-gentoo-ns (root@alerik) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #3 SMP PREEMPT Tue Jan 20 15:27:30 EST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000009ff10000 (usable)
 BIOS-e820: 000000009ff10000 - 000000009ff20000 (ACPI data)
 BIOS-e820: 000000009ff20000 - 00000000a0000000 (ACPI NVS)
 BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x9ff10 max_arch_pfn = 0x100000
kernel direct mapping tables up to 377fe000 @ 10000-16000
ACPI: RSDP 000FAD60, 0021 (r2 ACPIAM)
ACPI: XSDT 9FF10100, 003C (r1 A M I  OEMXSDT  12000519 MSFT       97)
ACPI: FACP 9FF10290, 00F4 (r3 A M I  OEMFACP  12000519 MSFT       97)
ACPI: DSDT 9FF103F0, 4B69 (r1  A0217 A0217001        1 INTL  2002026)
ACPI: FACS 9FF20000, 0040
ACPI: APIC 9FF10390, 005C (r1 A M I  OEMAPIC  12000519 MSFT       97)
ACPI: OEMB 9FF20040, 0040 (r1 A M I  AMI_OEM  12000519 MSFT       97)
ACPI: Local APIC address 0xfee00000
1671MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 00000000 - 377fe000
  bootmap 00012000 - 00018f00
(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 000069c390]    TEXT DATA BSS ==> [0000100000 - 000069c390]
  #4 [000069d000 - 00006a0000]    INIT_PG_TABLE ==> [000069d000 - 00006a0000]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #7 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0009ff10
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0009ff10
On node 0 totalpages: 655007
free_area_init_node: node 0, pgdat c05d5a40, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 3343 pages used for memmap
  HighMem zone: 424451 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at a8000000 (gap: a0000000:5f780000)
PERCPU: Allocating 32768 bytes of per cpu data
NR_CPUS: 4, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 649888
Kernel command line: BOOT_IMAGE=Gentoo_2.6.28 ro root=900 video=vesafb
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2000.067 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2592024k/2620480k available (3756k kernel code, 27164k reserved, 1301k data, 340k init, 1711176k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff85000 - 0xfffff000   ( 488 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc05f8000 - 0xc064d000   ( 340 kB)
      .data : 0xc04ab288 - 0xc05f081c   (1301 kB)
      .text : 0xc0100000 - 0xc04ab288   (3756 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.80 BogoMIPS (lpj=6666890)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.93 BogoMIPS (lpj=6665503)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Brought up 2 CPUs
Total of 2 processors activated (8002.74 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 1 0
net_namespace: 512 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:03.0: reg 10 32bit mmio: [0xdded3000-0xdded3fff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xdded8000-0xdded8fff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xdded9000-0xdded9fff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xddeda000-0xddedafff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:05.0: reg 10 io port: [0x9400-0x9407]
pci 0000:00:05.0: reg 14 io port: [0x9000-0x9003]
pci 0000:00:05.0: reg 18 io port: [0x8800-0x8807]
pci 0000:00:05.0: reg 1c io port: [0x8400-0x8403]
pci 0000:00:05.0: reg 20 io port: [0x8000-0x800f]
pci 0000:00:05.0: reg 24 io port: [0x7800-0x787f]
pci 0000:00:05.0: PME# supported from D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0x9800-0x98ff]
pci 0000:00:08.0: reg 14 32bit mmio: [0xddedb800-0xddedb8ff]
pci 0000:00:08.0: reg 30 32bit mmio: [0xddec0000-0xddecffff]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: reg 10 io port: [0xb400-0xb407]
pci 0000:00:09.0: reg 14 io port: [0xb000-0xb003]
pci 0000:00:09.0: reg 18 io port: [0xa800-0xa807]
pci 0000:00:09.0: reg 1c io port: [0xa400-0xa403]
pci 0000:00:09.0: reg 20 io port: [0xa000-0xa00f]
pci 0000:00:09.0: reg 24 32bit mmio: [0xddedbc00-0xddedbcff]
pci 0000:00:09.0: reg 30 32bit mmio: [0xdde00000-0xdde7ffff]
pci 0000:00:09.0: supports D1 D2
pci 0000:00:0a.0: reg 10 32bit mmio: [0xbc000000-0xbfffffff]
pci 0000:00:0b.0: reg 10 32bit mmio: [0xddee0000-0xddefffff]
pci 0000:00:0b.0: reg 18 io port: [0xb800-0xb83f]
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:03:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:03:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xde000000-0xdeffffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xddfe0000-0xddffffff]
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xddf00000-0xdfffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xdcffffff]
pci 0000:00:06.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 79, should be 6C [20080926]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:0a: ioport range 0xc00-0xc0f has been reserved
system 00:0a: ioport range 0xd00-0xd0f has been reserved
system 00:0a: ioport range 0xa20-0xa2f has been reserved
system 00:0a: ioport range 0xa30-0xa3f has been reserved
system 00:0b: ioport range 0x480-0x48f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: ioport range 0x800-0x8cf has been reserved
system 00:0b: ioport range 0x8d0-0x8ff has been reserved
system 00:0b: iomem range 0xfff80000-0xffffffff has been reserved
system 00:0b: iomem range 0xffee0000-0xffefffff has been reserved
system 00:0b: iomem range 0xfee00400-0xfee00fff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x9fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
pci 0000:00:01.0:   IO window: 0xe000-0xefff
pci 0000:00:01.0:   MEM window: 0xddf00000-0xdfffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000dcffffff
pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
pci 0000:00:06.0:   IO window: 0xd000-0xdfff
pci 0000:00:06.0:   MEM window: disabled
pci 0000:00:06.0:   PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:01
pci 0000:00:07.0:   IO window: 0xc000-0xcfff
pci 0000:00:07.0:   MEM window: disabled
pci 0000:00:07.0:   PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:06.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 03 index 0 io port: [0xe000-0xefff]
bus: 03 index 1 mmio: [0xddf00000-0xdfffffff]
bus: 03 index 2 mmio: [0xc0000000-0xdcffffff]
bus: 03 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xd000-0xdfff]
bus: 02 index 1 mmio: [0x0-0x0]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 01 index 0 io port: [0xc000-0xcfff]
bus: 01 index 1 mmio: [0x0-0x0]
bus: 01 index 2 mmio: [0x0-0x0]
bus: 01 index 3 mmio: [0x0-0x0]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(1232691087.256:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 8192, nTxLock = 65536
msgmni has been set to 1722
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:03:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 383 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
lp: driver loaded but no devices found
Linux agpgart interface v0.103
vesafb: framebuffer at 0xc0000000, mapped to 0xf8500000, using 1536k, total 65536k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:d1f0
vesafb: pmi: set display start = c00cd226, set palette = c00cd290
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
IT8712 SuperIO detected.
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
brd: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
e1000: 0000:00:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:15:f2:b1:e5:10
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
PPP generic driver version 2.4.2
8139too Fast Ethernet driver 0.9.28
8139too 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth1: RealTek RTL8139 at 0x9800, 00:e0:4c:ee:85:9c, IRQ 16
eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver
sis5513 0000:00:02.5: SiS965 ATA 133 (2nd gen) controller
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01)
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7
    ide1: BM-DMA at 0xffa8-0xffaf
Probing IDE interface ide0...
hda: WDC WD2500JB-00REA0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: WDC WD2500JB-00REA0, ATA DISK drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
siimage 0000:00:09.0: IDE controller (0x1095:0x0680 rev 0x02)
siimage 0000:00:09.0: BASE CLOCK == 133
siimage 0000:00:09.0: 100% native mode on irq 17
    ide2: MMIO-DMA
    ide3: MMIO-DMA
Probing IDE interface ide2...
hdf: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
hdf: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdf: UDMA/33 mode selected
Probing IDE interface ide3...
hdg: ST3120022A, ATA DISK drive
hdh: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
hdg: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdg: UDMA/100 mode selected
hdh: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdh: UDMA/33 mode selected
ide2 at 0xf84e0c80-0xf84e0c87,0xf84e0c8a on irq 17
ide3 at 0xf84e0cc0-0xf84e0cc7,0xf84e0cca on irq 17
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: max request size: 512KiB
hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3 hdc4
hdg: max request size: 64KiB
hdg: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63
hdg: cache flushes supported
 hdg: hdg1 hdg2
ide-cd driver 5.00
ide-cd: hdf: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-cd: hdh: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Driver 'sd' needs updating - please use bus_type methods
sata_sis 0000:00:05.0: version 1.0
sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
scsi0 : sata_sis
scsi1 : sata_sis
ata1: SATA max UDMA/133 cmd 0x9400 ctl 0x9000 bmdma 0x8000 irq 17
ata2: SATA max UDMA/133 cmd 0x8800 ctl 0x8400 bmdma 0x8008 irq 17
ata1: SATA link down (SStatus 1 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA52A, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xddeda000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xdded3000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xdded8000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xdded9000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input2
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [e-mail]
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /class/input/input3
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
  No soundcards found.
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
Using IPI No-Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
usb 2-1.1: new full speed USB device using ohci_hcd and address 3
md: Scanned 6 and added 6 devices.
md: autorun ...
md: considering hdc4 ...
md:  adding hdc4 ...
md: hdc3 has different UUID to hdc4
md: hdc1 has different UUID to hdc4
md:  adding hda4 ...
md: hda3 has different UUID to hdc4
md: hda1 has different UUID to hdc4
md: created md2
md: bind<hda4>
md: bind<hdc4>
md: running: <hdc4><hda4>
md2: setting max_sectors to 8, segment boundary to 2047
blk_queue_segment_boundary: set to minimum fff
raid0: looking at hdc4
raid0:   comparing hdc4(21518976) with hdc4(21518976)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at hda4
raid0:   comparing hda4(21518976) with hdc4(21518976)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 43037952 blocks.
raid0 : conf->hash_spacing is 43037952 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering hdc3 ...
md:  adding hdc3 ...
md: hdc1 has different UUID to hdc3
md:  adding hda3 ...
md: hda1 has different UUID to hdc3
md: created md1
md: bind<hda3>
md: bind<hdc3>
md: running: <hdc3><hda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering hdc1 ...
md:  adding hdc1 ...
md:  adding hda1 ...
md: created md0
md: bind<hda1>
md: bind<hdc1>
md: running: <hdc1><hda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
 md0:
ReiserFS: md0: found reiserfs format "3.6" with standard journal
ReiserFS: md0: using ordered data mode
usb 2-1.1: configuration #1 chosen from 1 choice
ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md0: checking transaction log (md0)
ReiserFS: md0: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 340k freed
input: Griffin Technology, Inc. PowerWave Composite as /class/input/input5
generic-usb 0003:077D:041A.0001: input: USB HID v1.00 Device [Griffin Technology, Inc. PowerWave Composite] on usb-0000:00:03.0-1.1/input3
udev: renamed network interface eth0 to eth1
udev: renamed network interface eth1_rename to eth0
nvidia: module license 'NVIDIA' taints kernel.
ivtv:  Start initialization, version 1.4.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tveeprom 0-0050: Hauppauge model 26552, rev F168, serial# 9900936
tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 0-0050: audio processor is CX25843 (idx 37)
tveeprom 0-0050: decoder processor is CX25843 (idx 30)
tveeprom 0-0050: has radio
ivtv0: Autodetected Hauppauge WinTV PVR-150
cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card #0: Hauppauge WinTV PVR-150
ivtv:  End initialization
 md1:<6> md2: unknown partition table
 unknown partition table
nvidia 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:03:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
ReiserFS: dm-7: found reiserfs format "3.6" with standard journal
ReiserFS: dm-7: using ordered data mode
ReiserFS: dm-7: journal params: device dm-7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-7: checking transaction log (dm-7)
ReiserFS: dm-7: Using r5 hash to sort names
ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
ReiserFS: dm-6: using ordered data mode
ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-6: checking transaction log (dm-6)
ReiserFS: dm-6: Using r5 hash to sort names
ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
ReiserFS: dm-4: using ordered data mode
ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-4: checking transaction log (dm-4)
ReiserFS: dm-4: Using r5 hash to sort names
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
ReiserFS: dm-8: found reiserfs format "3.6" with standard journal
ReiserFS: dm-8: using ordered data mode
ReiserFS: dm-8: journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-8: checking transaction log (dm-8)
ReiserFS: dm-8: Using r5 hash to sort names
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1951888k swap on /dev/hda2.  Priority:1 extents:1 across:1951888k
Adding 1951888k swap on /dev/hdc2.  Priority:1 extents:1 across:1951888k
NET: Registered protocol family 17
it87: Found IT8712F chip at 0xd00, revision 7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
ivtv 0000:00:0a.0: firmware: requesting v4l-cx2341x-enc.fw
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
cx25840 0-0044: firmware: requesting v4l-cx25840.fw
NET: Registered protocol family 24
cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
Clocksource tsc unstable (delta = -141155360 ns)
ClusterIP Version 0.8 loaded successfully