build.log

build.log (text/plain), 16.92 KB, created by Dave on 2008-08-10 15:55:45 UTC

 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found kernel object directory:
 *     /lib/modules/2.6.26-gentoo/build
 * Found sources for kernel version:
 *     2.6.26-gentoo
 * Checking for suitable kernel configuration options...                                                                                             [ ok ]
 * Compiling support for a lot of devices
 *
 * lirc-configure-opts:  --with-driver=all --without-soft-carrier --with-transmitter
 * Setting default lirc-device to /dev/lirc0
>>> Unpacking source...
>>> Unpacking lirc-0.8.3.tar.bz2 to /var/tmp/portage/app-misc/lirc-0.8.3-r2/work
 * Applying lirc-0.8.3-kernel-2.6.26.diff ...                                                                                                        [ ok ]
 * Applying lirc-0.8.3-imon-pad2keys.patch ...                                                                                                       [ ok ]
 * Applying lirc-0.8.3_pre1-remotewonderplus.patch ...                                                                                               [ ok ]
 * Disabling lirc_gpio driver as it does no longer work Kernel 2.6.22+
 * Applying lirc-0.8.3-pa19.patch ...                                                                                                                [ ok ]
 * Running eautoreconf in '/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3' ...
 * Running aclocal ...                                                                                                                               [ ok ]
 * Running libtoolize --copy --force --install --automake ...                                                                                        [ ok ]
 * Running aclocal ...                                                                                                                               [ ok ]
 * Running autoconf ...                                                                                                                              [ ok ]
 * Running autoheader ...                                                                                                                            [ ok ]
 * Running automake --add-missing --copy ...                                                                                                         [ ok ]
 * Running elibtoolize in: lirc-0.8.3
 *   Applying sed-1.5.6.patch ...
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3 ...
 * Preparing lirc module
 * econf: updating lirc-0.8.3/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating lirc-0.8.3/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --localstatedir=/var --with-syslog=LOG_DAEMON --enable-sandboxed --with-kerneldir=/usr/src/linux --with-moduledir=/lib/modules/2.6.26-gentoo/misc --disable-debug --with-x --with-driver=all --without-soft-carrier --with-transmitter --libdir=/usr/lib --build=i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i686-pc-linux-gnu-gcc accepts -g... yes
checking for i686-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of i686-pc-linux-gnu-gcc... gcc3
checking whether i686-pc-linux-gnu-gcc and cc understand -c and -o together... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for mknod... /bin/mknod
checking for mkfifo... /bin/mkfifo
checking for depmod... /sbin/depmod
checking for libusb-config... /usr/bin/libusb-config
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by i686-pc-linux-gnu-gcc... /usr/i686-pc-linux-gnu/bin/ld
checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files... -r
checking how to recognize dependent libraries... pass_all
checking for i686-pc-linux-gnu-ar... i686-pc-linux-gnu-ar
checking for i686-pc-linux-gnu-strip... i686-pc-linux-gnu-strip
checking for i686-pc-linux-gnu-ranlib... i686-pc-linux-gnu-ranlib
checking command to parse /usr/bin/nm -B output from i686-pc-linux-gnu-gcc object... ok
checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if i686-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for i686-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if i686-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if i686-pc-linux-gnu-gcc static flag -static works... yes
checking if i686-pc-linux-gnu-gcc supports -c -o file.o... yes
checking if i686-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes
checking whether the i686-pc-linux-gnu-gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking vga.h usability... yes
checking vga.h presence... yes
checking for vga.h... yes
checking vgagl.h usability... yes
checking vgagl.h presence... yes
checking for vgagl.h... yes
checking for vga_init in -lvga... yes
checking for gl_setcontextvga in -lvgagl... yes
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /usr/src/linux/
checking for which drivers can be installed on this system...
checking for caraca_init in -lcaraca_client... no
checking iguanaIR.h usability... no
checking iguanaIR.h presence... no
checking for iguanaIR.h... no
checking for ir_strerror in -lirman... yes
checking for ir_strerror in -lirman_sw... no
checking portaudio.h usability... yes
checking portaudio.h presence... yes
checking for portaudio.h... yes
checking for Pa_Initialize in -lportaudio... yes
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking for ALSA SB RC hwdep support... yes
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking linux/input.h usability... yes
checking linux/input.h presence... yes
checking for linux/input.h... yes
checking linux/types.h usability... yes
checking linux/types.h presence... yes
checking for linux/types.h... yes
checking for linux/hiddev.h... yes
checking for HIDDEV_FLAG_UREF support... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
checking linux/i2c-dev.h usability... yes
checking linux/i2c-dev.h presence... yes
checking for linux/i2c-dev.h... yes
checking for daemon... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating drivers/Makefile
config.status: creating drivers/lirc_atiusb/Makefile
config.status: creating drivers/lirc_bt829/Makefile
config.status: creating drivers/lirc_cmdir/Makefile
config.status: creating drivers/lirc_dev/Makefile
config.status: creating drivers/lirc_gpio/Makefile
config.status: creating drivers/lirc_i2c/Makefile
config.status: creating drivers/lirc_igorplugusb/Makefile
config.status: creating drivers/lirc_ttusbir/Makefile
config.status: creating drivers/lirc_imon/Makefile
config.status: creating drivers/lirc_it87/Makefile
config.status: creating drivers/lirc_mceusb/Makefile
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: creating drivers/lirc_parallel/Makefile
config.status: creating drivers/lirc_sasem/Makefile
config.status: creating drivers/lirc_serial/Makefile
config.status: creating drivers/lirc_sir/Makefile
config.status: creating drivers/lirc_streamzap/Makefile
config.status: creating daemons/Makefile
config.status: creating tools/Makefile
config.status: creating doc/Makefile
config.status: creating doc/man/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands

All kernel modules will be built.

Now enter 'make' and 'make install' to compile and install the package.

make  all-recursive
make[1]: Entering directory `/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3'
Making all in drivers
make[2]: Entering directory `/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers'
Making all in lirc_dev
make[3]: Entering directory `/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev'
mv Makefile Makefile.automake
cp ./../Makefile.kernel Makefile
CPPFLAGS="" CFLAGS="" LDFLAGS="" \
        make -C /usr/src/linux/ SUBDIRS=/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev modules \
                KBUILD_VERBOSE=1
make[4]: Entering directory `/usr/src/linux-2.6.26-gentoo'
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (            \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing.";      \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";  \
        echo;                                                           \
        /bin/false)
mkdir -p /var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/.tmp_versions ; rm -f /var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/.tmp_versions/*
make -f scripts/Makefile.build obj=/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev
  i686-pc-linux-gnu-gcc -Wp,-MD,/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/.lirc_dev.o.d  -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.3.1/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Os   -fno-stack-protector -m32 -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=athlon -mtune=generic -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -Iinclude/asm-x86/mach-default -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign   -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I../.. -I/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/. -I/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/. -I/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/../.. -I/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/../.. -I/usr/src/linux//include/ -I/usr/src/linux//drivers/media/video/  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_dev)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_dev)" -c -o /var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/.tmp_lirc_dev.o /var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/lirc_dev.c
In file included from include/linux/gfp.h:4,
                 from include/linux/slab.h:12,
                 from include/linux/percpu.h:5,
                 from include/asm/local.h:4,
                 from include/linux/module.h:19,
                 from /var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/lirc_dev.c:36:
include/linux/mmzone.h:18:26: error: linux/bounds.h: No such file or directory
include/linux/mmzone.h:197:5: warning: "MAX_NR_ZONES" is not defined
In file included from include/linux/gfp.h:4,
                 from include/linux/slab.h:12,
                 from include/linux/percpu.h:5,
                 from include/asm/local.h:4,
                 from include/linux/module.h:19,
                 from /var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/lirc_dev.c:36:
include/linux/mmzone.h:218: error: 'MAX_NR_ZONES' undeclared here (not in a function)
make[5]: *** [/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev/lirc_dev.o] Error 1
make[4]: *** [_module_/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev] Error 2
make[4]: Leaving directory `/usr/src/linux-2.6.26-gentoo'
make[3]: *** [lirc_dev.o] Error 2
make[3]: Leaving directory `/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers/lirc_dev'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3/drivers'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/app-misc/lirc-0.8.3-r2/work/lirc-0.8.3'
make: *** [all] Error 2
 *
 * ERROR: app-misc/lirc-0.8.3-r2 failed.
 * Call stack:
 *               ebuild.sh, line   49:  Called src_compile
 *             environment, line 4077:  Called linux-mod_src_compile
 *             environment, line 3167:  Called die
 * The specific snippet of code:
 *               eval "emake HOSTCC=\"$(tc-getBUILD_CC)\"                                               CC=\"$(get-KERNEL_CC)\"                           LDFLAGS=\"$(get_abi_LDFLAGS)\"                                           ${BUILD_FIXES}                                          ${BUILD_PARAMS}           ${BUILD_TARGETS} " || die "Unable to emake HOSTCC="$(tc-getBUILD_CC)" CC="$(get-KERNEL_CC)" LDFLAGS="$(get_abi_LDFLAGS)" ${BUILD_FIXES} ${BUILD_PARAMS} ${BUILD_TARGETS}";
 *  The die message:
 *   Unable to emake HOSTCC=i686-pc-linux-gnu-gcc CC=i686-pc-linux-gnu-gcc LDFLAGS=   all
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/app-misc/lirc-0.8.3-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-misc/lirc-0.8.3-r2/temp/environment'.
 *