dmesg-livecdx86_64-2008.0_beta1.txt

dmesg-livecdx86_64-2008.0_beta1.txt (text/plain), 38.05 KB, created by Martin Mokrejš on 2008-04-30 00:45:16 UTC

Linux version 2.6.23-gentoo-r8 (root@poseidon) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #1 SMP Mon Mar 31 02:05:22 UTC 2008
Command line: root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs  cdroot vga=791 all-generic-ide
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
 BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
 BIOS-e820: 00000000cffb0000 - 00000000cffbe000 (ACPI data)
 BIOS-e820: 00000000cffbe000 - 00000000cfff0000 (ACPI NVS)
 BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 156) 0 entries of 256 used
Entering add_active_range(0, 256, 851888) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
end_pfn_map = 1245184
DMI present.
ACPI: RSDP 000F9760, 0014 (r0 ACPIAM)
ACPI: RSDT CFFB0000, 0040 (r1 090407 RSDT1631 20070904 MSFT       97)
ACPI: FACP CFFB0200, 0084 (r2 090407 FACP1631 20070904 MSFT       97)
ACPI: DSDT CFFB0440, 52B7 (r1  0AAAA 0AAAA000        0 INTL 20051117)
ACPI: FACS CFFBE000, 0040
ACPI: APIC CFFB0390, 006C (r1 090407 APIC1631 20070904 MSFT       97)
ACPI: MCFG CFFB0400, 003C (r1 090407 OEMMCFG  20070904 MSFT       97)
ACPI: OEMB CFFBE040, 0061 (r1 090407 OEMB1631 20070904 MSFT       97)
ACPI: HPET CFFB5700, 0038 (r1 090407 OEMHPET  20070904 MSFT       97)
ACPI: GSCI CFFBE0B0, 2024 (r1 090407 GMCHSCI  20070904 MSFT       97)
ACPI: SSDT CFFC1320, 082F (r1 DpgPmm    CpuPm       12 INTL 20051117)
Entering add_active_range(0, 0, 156) 0 entries of 256 used
Entering add_active_range(0, 256, 851888) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1245184
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0:        0 ->      156
    0:      256 ->   851888
    0:  1048576 ->  1245184
On node 0 totalpages: 1048396
  DMA zone: 56 pages used for memmap
  DMA zone: 1461 pages reserved
  DMA zone: 2479 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833512 pages, LIFO batch:31
  Normal zone: 2688 pages used for memmap
  Normal zone: 193920 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009c000 - 000000000009d000
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e3000
swsusp: Registered nosave memory region: 00000000000e3000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffbe000
swsusp: Registered nosave memory region: 00000000cffbe000 - 00000000cfff0000
swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000
swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000
swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 35048 bytes of per cpu data
Built 1 zonelists in Zone order.  Total pages: 1029911
Kernel command line: root=/dev/ram0 init=/linuxrc  dokeymap looptype=squashfs loop=/image.squashfs  cdroot vga=791 all-generic-ide
IDE generic will claim all unknown PCI IDE storage controllers.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 3005.667 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x58cd000 - 0x98cd000
Memory: 4042112k/4980736k available (3526k kernel code, 151032k reserved, 1044k data, 244k init)
Calibrating delay using timer specific routine.. 6014.46 BogoMIPS (lpj=30072322)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 20872691
Detected 20.872 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5913.60 BogoMIPS (lpj=29568034)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 6011.41 BogoMIPS (lpj=30057062)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 6011.39 BogoMIPS (lpj=30056988)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  94, should be 93 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-GART: No AMD northbridge found.
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
pnp: 00:08: ioport range 0xa00-0xadf has been reserved
pnp: 00:08: ioport range 0xae0-0xaef has been reserved
pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
pnp: 00:0c: iomem range 0xffc00000-0xffefffff could not be reserved
pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0f: iomem range 0xc0000-0xcffff has been reserved
pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: fc000000-fe8fffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: c000-cfff
  MEM window: fe900000-fe9fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: d000-dfff
  MEM window: fea00000-feafffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: e000-efff
  MEM window: feb00000-febfffff
  PREFETCH window: f0000000-f00fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4690k freed
audit: initializing netlink socket (disabled)
audit(1209492490.440:1): initialized
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Mar 31 2008 02:03:20) installed
Lock_Nolock (built Mar 31 2008 02:03:41) installed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Linux agpgart interface v0.102
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Unknown: IDE controller at PCI slot 0000:03:00.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Unknown: chipset revision 177
Unknown: 100% native mode on irq 16
    ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Delock 54111 512MB, ATA DISK drive
hdb: ATAPI DVD D DH16D2P, ATAPI CD/DVD-ROM drive
ide0 at 0xcc00-0xcc07,0xc882 on irq 16
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 1006992 sectors (515 MB) w/1KiB Cache, CHS=999/16/63, UDMA(33)
 hda: hda1
hdb: ATAPI 40X DVD-ROM drive, 198kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 244k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-4: new high speed USB device using ehci_hcd and address 3
usb 2-4: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b080
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
libata version 2.21 loaded.
ahci 0000:00:1f.2: version 2.3
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 cmd 0xffffc20000032100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata2: SATA max UDMA/133 cmd 0xffffc20000032180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata3: SATA max UDMA/133 cmd 0xffffc20000032200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata4: SATA max UDMA/133 cmd 0xffffc20000032280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata5: SATA max UDMA/133 cmd 0xffffc20000032300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata6: SATA max UDMA/133 cmd 0xffffc20000032380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1275
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
usb-storage: device scan complete
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access                                    PQ: 0 ANSI: 2 CCS
scsi 1:0:0:0: Direct-Access     USB 2.0  Flash Disk       0.00 PQ: 0 ANSI: 2
sd 1:0:0:0: [sda] 7897087 512-byte hardware sectors (4043 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] 7897087 512-byte hardware sectors (4043 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 1:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 1:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: [sdb] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD1000FYPS-01ZKB0, 02.01B01, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: unknown partition table
sd 4:0:0:0: [sdc] Attached SCSI disk
scsi 5:0:0:0: Direct-Access     ATA      WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: unknown partition table
sd 5:0:0:0: [sdd] Attached SCSI disk
scsi 6:0:0:0: Direct-Access     ATA      WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
sd 6:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: unknown partition table
sd 6:0:0:0: [sde] Attached SCSI disk
scsi 7:0:0:0: Direct-Access     ATA      WDC WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdf] 1953525168 512-byte hardware sectors (1000205 MB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdf: unknown partition table
sd 7:0:0:0: [sdf] Attached SCSI disk
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [e-mail]
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
   generic_sse: 11172.400 MB/sec
xor: using function: generic_sse (11172.400 MB/sec)
raid6: int64x1   2194 MB/s
raid6: int64x2   2643 MB/s
raid6: int64x4   2596 MB/s
raid6: int64x8   1712 MB/s
raid6: sse2x1    4183 MB/s
raid6: sse2x2    5901 MB/s
raid6: sse2x4    7265 MB/s
raid6: using algorithm sse2x4 (7265 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:05:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:84:83:71
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
UDF-fs: No VRS found
(5759,0):ocfs2_fill_super:583 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/sda
GFS2: gfs2 mount does not exist
ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 2, size 4096)
ReiserFS: sdb: warning: sh-2006: read_super_block: bread failed (dev sdb, block 16, size 4096)
EXT3-fs: unable to read superblock
EXT4-fs: unable to read superblock
EXT2-fs: unable to read superblock
SQUASHFS error: sb_bread failed reading block 0x0
FAT: unable to read boot sector
isofs_fill_super: bread failed, dev=sdb, iso_blknum=16, block=32
UDF-fs: No partition found (1)
(5772,0):ocfs2_fill_super:583 ERROR: superblock probe failed!
gfs2: error -5 reading superblock
GFS2: Unrecognized block device or mount point /dev/sdb
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(5778,3):ocfs2_fill_super:583 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/sdc
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(5784,0):ocfs2_fill_super:583 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/sdd
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(5790,1):ocfs2_fill_super:583 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/sde
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(5796,2):ocfs2_fill_super:583 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/sdf
GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
(5802,0):ocfs2_fill_super:583 ERROR: superblock probe failed!
GFS2: Unrecognized block device or mount point /dev/hda
GFS2: gfs2 mount does not exist
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Real Time Clock Driver v1.12ac
input: PC Speaker as /devices/platform/pcspkr/input/input2
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:0: Attached scsi generic sg5 type 0
input: Power Button (FF) as /devices/virtual/input/input3
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth1: RTL8168b/8111b at 0xffffc20000038000, 00:19:db:f6:31:7d, XID 38000000 IRQ 17
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input4
ACPI: SSDT CFFC00E0, 0277 (r1 DpgPmm  P001Ist       11 INTL 20051117)
ACPI: SSDT CFFC0570, 0277 (r1 DpgPmm  P002Ist       12 INTL 20051117)
ACPI: SSDT CFFC0A00, 0277 (r1 DpgPmm  P003Ist       12 INTL 20051117)
ACPI: SSDT CFFC0E90, 0277 (r1 DpgPmm  P004Ist       12 INTL 20051117)
ACPI: Power Button (CM) [PWRB]
No dock devices found.
fbcondecor: console 0 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 0
fbcondecor: console 1 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 1
fbcondecor: console 2 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 2
r8169: eth1: link up
r8169: eth1: link up
fbcondecor: console 3 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 3
fbcondecor: console 4 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 4
Bridge firewalling registered
fbcondecor: console 5 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 5
fbcondecor: console 6 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 6
fbcondecor: console 7 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 7
fbcondecor: console 8 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 8
fbcondecor: console 9 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 9
fbcondecor: console 10 using theme 'livecd-2007.0'
fbcondecor: switched decor state to 'on' on console 10
mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fc000000-fe8fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000
	Capabilities: [80] Power Management version 3
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
	Capabilities: [a0] Express Root Port (Slot+), MSI 00

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at bc00 [size=32]
	Capabilities: [50] Vendor Specific Information

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 21
	I/O ports at b880 [size=32]
	Capabilities: [50] Vendor Specific Information

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 18
	Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port
	Capabilities: [98] Vendor Specific Information

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
	Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Capabilities: [a0] Power Management version 2

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fe900000-fe9fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
	Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Capabilities: [a0] Power Management version 2

00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
	Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Capabilities: [a0] Power Management version 2

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 23
	I/O ports at b800 [size=32]
	Capabilities: [50] Vendor Specific Information

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 19
	I/O ports at b480 [size=32]
	Capabilities: [50] Vendor Specific Information

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 18
	I/O ports at b400 [size=32]
	Capabilities: [50] Vendor Specific Information

00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 16
	I/O ports at b080 [size=32]
	Capabilities: [50] Vendor Specific Information

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port
	Capabilities: [98] Vendor Specific Information

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: feb00000-febfffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
	Capabilities: [50] Subsystem: Micro-Star International Co., Ltd. Unknown device 7345

00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information

00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 1275
	I/O ports at b000 [size=8]
	I/O ports at ac00 [size=4]
	I/O ports at a880 [size=8]
	I/O ports at a800 [size=4]
	I/O ports at a480 [size=32]
	Memory at fbfff000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+
	Capabilities: [70] Power Management version 3
	Capabilities: [a8] #12 [0010]
	Capabilities: [b0] Vendor Specific Information

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
	Subsystem: Micro-Star International Co., Ltd. Unknown device 7345
	Flags: medium devsel, IRQ 18
	Memory at fbffec00 (64-bit, non-prefetchable) [size=256]
	I/O ports at 0400 [size=32]

01:00.0 VGA compatible controller: nVidia Corporation GeForce 7100 GS (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Micro-Star International Co., Ltd. Unknown device 0340
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at fe8e0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
	Capabilities: [78] Express Endpoint, MSI 00

03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Marvell Technology Group Ltd. 88SE6121 SATA II Controller
	Flags: bus master, fast devsel, latency 0, IRQ 16
	I/O ports at cc00 [size=8]
	I/O ports at c880 [size=4]
	I/O ports at c800 [size=8]
	I/O ports at c480 [size=4]
	I/O ports at c400 [size=16]
	Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
	Capabilities: [e0] Express Legacy Endpoint, MSI 00

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
	Subsystem: Micro-Star International Co., Ltd. Unknown device 345c
	Flags: bus master, fast devsel, latency 0, IRQ 17
	I/O ports at d800 [size=256]
	Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at feac0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [84] Vendor Specific Information

05:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
	Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
	Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
	Memory at febc0000 (32-bit, non-prefetchable) [size=128K]
	I/O ports at ec00 [size=64]
	Expansion ROM at f0000000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
	Capabilities: [e4] PCI-X non-bridge device