dmesg-2.6.24.3

slamr.bug (text/plain), 22.01 KB, created by Martin Mokrejš on 2008-04-13 21:07:37 UTC

Linux version 2.6.24.3 (root@vrapenec) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #2 Mon Mar 17 14:29:55 MET 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fff9000 (usable)
 BIOS-e820: 000000003fff9000 - 000000003ffff000 (ACPI data)
 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 262137) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   262137
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   262137
On node 0 totalpages: 262137
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 255 pages used for memmap
  HighMem zone: 32506 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6890, 0014 (r0 ASUS  )
ACPI: RSDT 3FFF9000, 002C (r1 ASUS   P4_L3CS  42302E31 MSFT 31313031)
ACPI: FACP 3FFF9080, 0074 (r1 ASUS   P4_L3CS  42302E31 MSFT 31313031)
ACPI: DSDT 3FFF9100, 52E9 (r1   ASUS P4_L3CS      1000 MSFT  100000D)
ACPI: FACS 3FFFF000, 0040
ACPI: BOOT 3FFF9040, 0028 (r1 ASUS   P4_L3CS  42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 50000000 (gap: 40000000:bfff0000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260090
Kernel command line: root=/dev/hda3 console=ttyS0,57600n8 console=tty0 vga=0x318 video=vesafb:mtrr:3,ywrap udev
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (01c78000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1800.119 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034432k/1048548k available (2599k kernel code, 13552k reserved, 1334k data, 192k init, 131044k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc13da000 - 0xc140a000   ( 192 kB)
      .data : 0xc1289f18 - 0xc13d7a7c   (1334 kB)
      .text : 0xc1000000 - 0xc1289f18   (2599 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3601.91 BogoMIPS (lpj=1800955)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Compat vDSO mapped to ffffe000.
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0a28)
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0e40, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Enabled i801 SMBus device
PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 11) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PRCF] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
spurious 8259A interrupt: IRQ7.
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f has been reserved
system 00:02: ioport range 0xec00-0xec3f has been reserved
system 00:02: ioport range 0x40b-0x40b has been reserved
system 00:02: ioport range 0x480-0x48f has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:03: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:03: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x77c-0x77f has been reserved
system 00:0e: ioport range 0x610-0x62f has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: d000-dfff
  MEM window: d7000000-d7efffff
  PREFETCH window: d7f00000-dfffffff
PCI: Bus 3, cardbus bridge: 0000:02:07.0
  IO window: 0000a000-0000a0ff
  IO window: 0000a400-0000a4ff
  PREFETCH window: 50000000-53ffffff
  MEM window: 54000000-57ffffff
PCI: Bus 7, cardbus bridge: 0000:02:07.1
  IO window: 0000ac00-0000acff
  IO window: 00001000-000010ff
  PREFETCH window: 58000000-5bffffff
  MEM window: 5c000000-5fffffff
PCI: Bridge: 0000:00:1e.0
  IO window: a000-afff
  MEM window: d6000000-d6ffffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
PCI: Enabling device 0000:02:07.1 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:07.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
highmem bounce pool size: 64 pages
DLM (built Mar 14 2008 11:19:12) installed
fuse init (API version 7.9)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=230.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
Non-DDC laptop panel detected
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-2: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Samsung LTN150P1-L02    
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 175x65
radeonfb (0000:01:00.0): ATI Radeon LW 
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /devices/virtual/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /devices/virtual/input/input2
ACPI: Lid Switch [LIDD]
ACPI: Transitioning device [CFAN] to D3
ACPI: Transitioning device [CFAN] to D3
ACPI: Fan [CFAN] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (60 C)
Asus Laptop ACPI Extras version 0.30
  L3C model detected, supported
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller (0x8086:0x248a rev 0x02) at  PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST9160821A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2212, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
input: PC Speaker as /devices/platform/pcspkr/input/input4
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
i2c /dev entries driver
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
SCTP: Hash tables configured (established 65536 bind 65536)
Marking TSC unstable due to: TSC halts in idle.
Time: acpi_pm clocksource has been installed.
Using IPI Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 192k freed
Linux agpgart interface v0.102
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000b800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000b400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: probe 8086:2486 ICH card...
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
slamr: mc97 codec is SIL21
slamr: slamr0 is ICH card.
usb 1-2: new low speed USB device using uhci_hcd and address 2
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xf885c000, 00:e0:18:b6:9d:31, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100'
lp0: using parport0 (interrupt-driven).
usb 1-2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input6
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
agpgart: Detected an Intel 845G Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
ACPI: PCI Interrupt 0000:02:07.2[C] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3]  MMIO=[d6000000-d60007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7
ACPI: Video Device [VGAC] (multi-head: yes  rom: no  post: no)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50436 usecs
intel8x0: clocking to 48000
Yenta: CardBus bridge found at 0000:02:07.0 [1043:1624]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000305e5fc]
Yenta: ISA IRQ mask 0x0010, PCI irq 5
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff
Yenta: CardBus bridge found at 0000:02:07.1 [1043:1624]
Yenta: ISA IRQ mask 0x0010, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xd6000000 - 0xd6ffffff
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on hda3, internal journal
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.28.0 20060524 on minor 0
[drm] Used old pci detect: framebuffer loaded
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.9.4
ath_pci: no version for "ieee80211_encap" found: kernel tainted.
ath_pci: 0.9.4
Adding 1028152k swap on /dev/hda4.  Priority:-1 extents:1 across:1028152k
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 2 usecs
Clocksource tsc unstable (delta = -166566165 ns)
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
BUG: unable to handle kernel paging request at virtual address f996ef94
printing eip: c10605eb *pde = 37e4d067 *pte = 00000000 
Oops: 0000 [#1] 
Modules linked in: snd_pcm_oss snd_mixer_oss ath_pci(F) wlan ath_hal(P) ohci_hcd ehci_hcd radeon drm pcmcia yenta_socket snd_intel8x0 snd_ac97_codec video ohci1394 ac97_bus intel_agp output snd_pcm snd_timer ieee1394 8139too rsrc_nonstatic pcmcia_core parport_pc snd soundcore snd_page_alloc uhci_hcd agpgart

Pid: 5479, comm: slmodemd Tainted: PF       (2.6.24.3 #2)
EIP: 0060:[<c10605eb>] EFLAGS: 00010286 CPU: 0
EIP is at do_select+0x294/0x498
EAX: f996ef78 EBX: 00000000 ECX: 00000004 EDX: f7c60d88
ESI: f67346c0 EDI: 00000010 EBP: f66cfe2c ESP: f66cfb80
 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process slmodemd (pid: 5479, ti=f66ce000 task=f7c3a570 task.ti=f66ce000)
Stack: f66cfe4c f66cfe48 f7cc1fb0 f66cff9c f66cff48 00000000 00000004 f66cfe54 
       f66cfe58 f66cfe5c f66cfe48 f66cfe4c f66cfe50 00000020 00000000 00000010 
       00000030 00000004 00000000 00000000 00000000 00000000 00000006 c1060cf4 
Call Trace:
 [<c1004b25>] show_trace_log_lvl+0x1a/0x2f
 [<c1004bd5>] show_stack_log_lvl+0x9b/0xa3
 [<c1004c83>] show_registers+0xa6/0x177
 [<c1004e3c>] die+0xe8/0x1c1
 [<c1015913>] do_page_fault+0x424/0x4fd
 [<c128916a>] error_code+0x6a/0x70
 [<c10609a6>] core_sys_select+0x1b7/0x24a
 [<c1060e39>] sys_select+0x95/0x149
 [<c1003c42>] sysenter_past_esp+0x5f/0x85
 =======================
Code: 85 bd 94 fd ff ff 0f 84 a3 00 00 00 8d 55 f0 8b 85 6c fd ff ff e8 e2 70 ff ff 89 c6 85 c0 0f 84 86 00 00 00 8b 40 10 85 c0 74 1f <8b> 48 1c 85 c9 74 18 31 d2 83 bd a8 fd ff ff 00 0f 44 95 68 fd 
EIP: [<c10605eb>] do_select+0x294/0x498 SS:ESP 0068:f66cfb80
---[ end trace da1399003d61ee6f ]---
BUG: unable to handle kernel paging request at virtual address f996efac
printing eip: c10550f7 *pde = 37e4d067 *pte = 00000000 
Oops: 0000 [#2] 
Modules linked in: snd_pcm_oss snd_mixer_oss ath_pci(F) wlan ath_hal(P) ohci_hcd ehci_hcd radeon drm pcmcia yenta_socket snd_intel8x0 snd_ac97_codec video ohci1394 ac97_bus intel_agp output snd_pcm snd_timer ieee1394 8139too rsrc_nonstatic pcmcia_core parport_pc snd soundcore snd_page_alloc uhci_hcd agpgart

Pid: 5479, comm: slmodemd Tainted: PF     D (2.6.24.3 #2)
EIP: 0060:[<c10550f7>] EFLAGS: 00010086 CPU: 0
EIP is at filp_close+0x2a/0x5c
EAX: f996ef78 EBX: f67346c0 ECX: f67346c0 EDX: f7c60d80
ESI: f7c60d80 EDI: 00000010 EBP: f66cfa64 ESP: f66cfa54
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process slmodemd (pid: 5479, ti=f66ce000 task=f7c3a570 task.ti=f66ce000)
Stack: 0000006b f7c60d80 00000003 00000010 f66cfa80 c101ee76 f7c60d88 00000000 
       00000001 f7c3a570 0000000b f66cfa88 c101eed1 f66cfac8 c101fdcc c1004d4c 
       f66cfb48 f66cfb80 c1340068 f66cfab4 c101e0e6 c134694b f66cfac0 f66cfac0 
Call Trace:
 [<c1004b25>] show_trace_log_lvl+0x1a/0x2f
 [<c1004bd5>] show_stack_log_lvl+0x9b/0xa3
 [<c1004c83>] show_registers+0xa6/0x177
 [<c1004e3c>] die+0xe8/0x1c1
 [<c1015913>] do_page_fault+0x424/0x4fd
 [<c128916a>] error_code+0x6a/0x70
 [<c101ee76>] put_files_struct+0x63/0xa0
 [<c101eed1>] __exit_files+0x1e/0x20
 [<c101fdcc>] do_exit+0x1bd/0x5cd
 [<c1004f0d>] die+0x1b9/0x1c1
 [<c1015913>] do_page_fault+0x424/0x4fd
 [<c128916a>] error_code+0x6a/0x70
 [<c10609a6>] core_sys_select+0x1b7/0x24a
 [<c1060e39>] sys_select+0x95/0x149
 [<c1003c42>] sysenter_past_esp+0x5f/0x85
 =======================
Code: c3 55 89 e5 57 56 53 83 ec 04 89 c3 89 d6 83 78 14 00 75 10 c7 04 24 14 d1 34 c1 e8 df 8f fc ff 31 ff eb 31 8b 40 10 85 c0 74 0f <8b> 48 34 85 c9 74 08 89 d8 ff d1 89 c7 eb 02 31 ff 89 f2 89 d8 
EIP: [<c10550f7>] filp_close+0x2a/0x5c SS:ESP 0068:f66cfa54
---[ end trace da1399003d61ee6f ]---
Fixing recursive fault but reboot is needed!