php-5.2.6_rc3.log

php-5.2.6_rc3.log (text/plain), 26.20 KB, created by calculator on 2008-04-08 19:43:44 UTC

 [33;01m*[0m This profile has not been tested thoroughly and is not considered to be
 [33;01m*[0m a supported server profile at this time.  For a supported server
 [33;01m*[0m profile, please check the Hardened project (http://hardened.gentoo.org).

 [33;01m*[0m This profile is merely a convenience for people who require a more
 [33;01m*[0m minimal profile, yet are unable to use hardened due to restrictions in
 [33;01m*[0m the software being used on the server. This profile should also be used
 [33;01m*[0m if you require GCC 4.1 or Glibc 2.4 support. If you don't know if this
 [33;01m*[0m applies to you, then it doesn't and you should probably be using
 [33;01m*[0m Hardened, instead.

 [32;01m*[0m Determining SAPI(s) to build
 [32;01m*[0m   Enabled  SAPI: cli
 [32;01m*[0m   Disabled SAPI: cgi
 [32;01m*[0m   Enabled  SAPI: apache2
 [33;01m*[0m 
 [33;01m*[0m 'fastbuild' attempts to build all SAPIs in a single pass.
 [33;01m*[0m This is an experimental feature, so please rebuild PHP
 [33;01m*[0m without the 'fastbuild' USE flag if you experience
 [33;01m*[0m any problems, and then reproduce any bugs before filing
 [33;01m*[0m them in Gentoo's Bugzilla or bugs.php.net.
 [33;01m*[0m If you have conclusive evidence that a bug directly
 [33;01m*[0m derives from 'fastbuild', please file a bug in
 [33;01m*[0m Gentoo's Bugzilla only.
 [33;01m*[0m 
 [33;01m*[0m QA Notice: USE Flag 'kolab' not in IUSE for dev-lang/php-5.2.6_rc3
 [33;01m*[0m QA Notice: USE Flag 'kolab' not in IUSE for dev-lang/php-5.2.6_rc3
 [33;01m*[0m 
 [33;01m*[0m Please ensure you have a full install of the Oracle client.
 [33;01m*[0m 'dev-db/oracle-instantclient-basic' is NOT sufficient.
 [33;01m*[0m Please enable the 'oci8-instant-client' USE flag instead, if you
 [33;01m*[0m want to use 'dev-db/oracle-instantclient-basic' as Oracle client.
 [33;01m*[0m 
 [33;01m*[0m USE flag oci8 enables support for software not present in Portage!
 [33;01m*[0m 
 [33;01m*[0m This ebuild will continue, but if you haven't already installed the
 [33;01m*[0m software required to satisfy the list above, this package will probably
 [33;01m*[0m fail to compile later on.
 [33;01m*[0m *DO NOT* file bugs about compile failures or issues you're having
 [33;01m*[0m when using one of those flags, as we aren't able to support them.
 [33;01m*[0m |=|=|=|=|=|=| You are on your own if you use them! |=|=|=|=|=|=|
 [33;01m*[0m 
>>> Unpacking source...
>>> Unpacking php-5.2.6RC3.tar.bz2 to /mnt/other/tmp/portage/tmp/portage/dev-lang/php-5.2.6_rc3/work
>>> Unpacking php-patchset-5.2.6_rc3-r0.tar.bz2 to /mnt/other/tmp/portage/tmp/portage/dev-lang/php-5.2.6_rc3/work
 [32;01m*[0m Applying fastbuild.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying multilib-search-path.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Applying various patches (bugfixes/updates) ...
 [32;01m*[0m   imap-symlink.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   iodbc-config.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   mysql-charsetphpini.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   mysqli-charsetphpini.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   pdo_mysql-charsetphpini.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   prefork-peruser-itk.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   with-iodbc.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Done with patching
 [32;01m*[0m Applying various patches (bugfixes/updates) ...
 [32;01m*[0m   001_tests-ignore-php-ini.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   002_run-tests-ignore-php-ini.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m   003_imap_setacl-crash.patch ...
[A[147C  [34;01m[ [32;01mok[34;01m ][0m
 [32;01m*[0m Done with patching
 [32;01m*[0m Running aclocal
 [33;01m*[0m QA Notice: 'aclocal' called by php5_2-sapi_src_unpack: dev-lang/php-5.2.6_rc3
 [33;01m*[0m Use autotools.eclass instead of calling 'aclocal' directly.
acinclude.m4:1085: warning: underquoted definition of PHP_CHECK_SIZEOF
acinclude.m4:1085:   run info '(automake)Extending aclocal'
acinclude.m4:1085:   or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
configure.in:152: warning: AC_PROG_LEX invoked multiple times
../../lib/autoconf/programs.m4:779: AC_DECL_YYTEXT is expanded from...
acinclude.m4:2086: PHP_PROG_LEX is expanded from...
configure.in:152: the top level
 [32;01m*[0m Running libtoolize
 [33;01m*[0m QA Notice: 'libtoolize' called by php5_2-sapi_src_unpack: dev-lang/php-5.2.6_rc3
 [33;01m*[0m Use autotools.eclass instead of calling 'libtoolize' directly.
 [32;01m*[0m Rebuilding configure script
acinclude.m4:1085: warning: underquoted definition of PHP_CHECK_SIZEOF
acinclude.m4:1085:   run info '(automake)Extending aclocal'
acinclude.m4:1085:   or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
configure.in:152: warning: AC_PROG_LEX invoked multiple times
../../lib/autoconf/programs.m4:779: AC_DECL_YYTEXT is expanded from...
acinclude.m4:2086: PHP_PROG_LEX is expanded from...
configure.in:152: the top level
configure.in:152: warning: AC_PROG_LEX invoked multiple times
../../lib/autoconf/programs.m4:779: AC_DECL_YYTEXT is expanded from...
acinclude.m4:2086: PHP_PROG_LEX is expanded from...
configure.in:152: the top level
configure.in:152: warning: AC_PROG_LEX invoked multiple times
../../lib/autoconf/programs.m4:779: AC_DECL_YYTEXT is expanded from...
acinclude.m4:2086: PHP_PROG_LEX is expanded from...
configure.in:152: the top level
autoheader-2.61: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader-2.61: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader-2.61: WARNING: is deprecated and discouraged.
autoheader-2.61: 
autoheader-2.61: WARNING: Using the third argument of `AC_DEFINE' and
autoheader-2.61: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader-2.61: WARNING: `acconfig.h':
autoheader-2.61: 
autoheader-2.61: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader-2.61: 		[Define if a function `main' is needed.])
autoheader-2.61: 
autoheader-2.61: WARNING: More sophisticated templates can also be produced, see the
autoheader-2.61: WARNING: documentation.
configure.in:152: warning: AC_PROG_LEX invoked multiple times
../../lib/autoconf/programs.m4:779: AC_DECL_YYTEXT is expanded from...
acinclude.m4:2086: PHP_PROG_LEX is expanded from...
configure.in:152: the top level
 [32;01m*[0m Running elibtoolize in: php-5.2.6RC3/ext/pdo_sqlite/sqlite
 [32;01m*[0m   Applying install-sh-1.5.patch ...
 [32;01m*[0m   Applying portage-1.5.10.patch ...
 [32;01m*[0m   Applying max_cmd_len-1.5.20.patch ...
 [32;01m*[0m   Applying sed-1.5.6.patch ...
 [32;01m*[0m Running elibtoolize in: php-5.2.6RC3
 [32;01m*[0m   Applying portage-1.5.10.patch ...
 [32;01m*[0m   Applying sed-1.5.6.patch ...
>>> Source unpacked.
>>> Compiling source in /mnt/other/tmp/portage/tmp/portage/dev-lang/php-5.2.6_rc3/work/php-5.2.6RC3 ...
 [33;01m*[0m Enabling ZTS for Apache2 MPM
 [32;01m*[0m   Disabling bcmath
 [32;01m*[0m   Enabling bz2
 [32;01m*[0m   Disabling calendar
 [32;01m*[0m   Enabling ctype
 [32;01m*[0m   Enabling curl
 [32;01m*[0m   Disabling curlwrappers
 [32;01m*[0m   Disabling dbase
 [32;01m*[0m   Enabling dom
 [32;01m*[0m   Enabling exif
 [32;01m*[0m   Disabling fbsql
 [32;01m*[0m   Disabling fdftk
 [32;01m*[0m   Disabling filter
 [32;01m*[0m   Enabling ftp
 [32;01m*[0m   Enabling gettext
 [32;01m*[0m   Disabling gmp
 [32;01m*[0m   Disabling hash
 [32;01m*[0m   Enabling iconv
 [32;01m*[0m   Disabling ipv6
 [32;01m*[0m   Disabling json
 [32;01m*[0m   Disabling kerberos
 [32;01m*[0m   Enabling libxml
 [32;01m*[0m   Enabling mbstring
 [32;01m*[0m   Enabling mcrypt
 [32;01m*[0m   Disabling mhash
 [32;01m*[0m   Disabling msql
 [32;01m*[0m   Disabling mssql
 [32;01m*[0m   Enabling ncurses
 [32;01m*[0m   Enabling openssl
 [32;01m*[0m   Enabling openssl-dir
 [32;01m*[0m   Disabling pcntl
 [32;01m*[0m   Enabling pcre-regex
 [32;01m*[0m   Disabling pdo
 [32;01m*[0m   Disabling pgsql
 [32;01m*[0m   Enabling posix
 [32;01m*[0m   Enabling pspell
 [32;01m*[0m   Disabling recode
 [32;01m*[0m   Enabling reflection
 [32;01m*[0m   Enabling simplexml
 [32;01m*[0m   Disabling shmop
 [32;01m*[0m   Enabling snmp
 [32;01m*[0m   Enabling soap
 [32;01m*[0m   Enabling sockets
 [32;01m*[0m   Enabling spl
 [32;01m*[0m   Disabling sybase
 [32;01m*[0m   Disabling sybase-ct
 [32;01m*[0m   Disabling sysvmsg
 [32;01m*[0m   Disabling sysvsem
 [32;01m*[0m   Disabling sysvshm
 [32;01m*[0m   Disabling tidy
 [32;01m*[0m   Enabling tokenizer
 [32;01m*[0m   Disabling wddx
 [32;01m*[0m   Enabling xml
 [32;01m*[0m   Disabling xmlreader
 [32;01m*[0m   Disabling xmlwriter
 [32;01m*[0m   Disabling xmlrpc
 [32;01m*[0m   Enabling xsl
 [32;01m*[0m   Disabling zip
 [32;01m*[0m   Enabling zlib
 [32;01m*[0m   Disabling debug
 [32;01m*[0m   Disabling cdb
 [32;01m*[0m   Enabling db4
 [32;01m*[0m   Disabling flatfile
 [32;01m*[0m   Enabling gdbm
 [32;01m*[0m   Disabling inifile
 [32;01m*[0m   Disabling qdbm
 [32;01m*[0m   Disabling freetype-dir
 [32;01m*[0m   Disabling t1lib
 [32;01m*[0m   Disabling gd-jis-conv
 [32;01m*[0m   Enabling jpeg-dir
 [32;01m*[0m   Enabling png-dir
 [32;01m*[0m   Disabling xpm-dir
 [32;01m*[0m   Enabling gd
 [32;01m*[0m   Enabling imap
 [32;01m*[0m   Enabling imap-ssl
 [32;01m*[0m   Enabling ldap
 [32;01m*[0m   Enabling mysql
 [32;01m*[0m   Enabling mysql-sock
 [32;01m*[0m   Disabling mysqli
 [32;01m*[0m   Enabling oci8
 [32;01m*[0m   Enabling readline
 [32;01m*[0m   Disabling libedit
 [32;01m*[0m   Disabling mm
 [32;01m*[0m   Disabling sqlite
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
configure: creating cache ./config.cache
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for a sed that does not truncate output... /bin/sed
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
Updated main/php_version.h
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i686-pc-linux-gnu-gcc accepts -g... yes
checking for i686-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E
checking for icc... no
checking whether i686-pc-linux-gnu-gcc and cc understand -c and -o together... yes
checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E
checking for AIX... no
checking whether ln -s works... yes
checking for system library directory... lib
checking whether to enable runpaths... yes
checking if compiler supports -R... no
checking if compiler supports -Wl,-rpath,... yes
checking for re2c... re2c
checking for re2c version... 0.12.0 (ok)
checking for gawk... gawk
checking for bison... bison -y
checking for bison version... 2.3 (ok)
checking for flex... flex
checking lex output file root... lex.yy
checking lex library... -lfl
checking whether yytext is a pointer... yes
checking for an ANSI C-conforming const... yes
checking for flex version... invalid
configure: WARNING: flex versions supported for regeneration of the Zend/PHP parsers: 2.5.4  (found: 2.5.33)
checking whether to force non-PIC code in shared modules... yes
checking whether /dev/urandom exists... yes
checking for pthreads_cflags... -pthread
checking for pthreads_lib... 

[1mConfiguring SAPI modules[m
checking for AOLserver support... no
checking for Apache 1.x module support via DSO through APXS... no
checking for Apache 1.x module support... no
checking whether to enable Apache charset compatibility option... no
checking for Apache 2.0 filter-module support via DSO through APXS... no
checking for Apache 2.0 handler-module support via DSO through APXS... yes
checking for Apache 1.x (hooks) module support via DSO through APXS... no
checking for Apache 1.x (hooks) module support... no
checking whether to enable Apache charset compatibility option... no
checking for Caudium support... no
checking for CLI build... yes
checking for Continuity support... no
checking for embedded SAPI library support... no
checking for Zeus ISAPI support... no
checking for Milter support... no
checking for NSAPI support... no
checking for PHTTPD support... no
checking for Pi3Web support... no
checking whether Roxen module is build using ZTS... no
checking for Roxen/Pike support... 
checking for thttpd... no
checking for TUX... no
checking for webjames... no
checking whether to build CGI binary... no
checking for chosen SAPI module... apache2handler

[1mRunning system checks[m
checking for sendmail... /usr/sbin/sendmail
checking whether system uses EBCDIC... no
checking whether byte ordering is bigendian... no
checking whether writing to stdout works... This is the test message -- yes
checking for socket... yes
checking for socketpair... yes
checking for htonl... yes
checking for gethostname... yes
checking for gethostbyaddr... yes
checking for yp_get_default_domain... no
checking for __yp_get_default_domain... no
checking for yp_get_default_domain in -lnsl... yes
checking for dlopen... no
checking for __dlopen... no
checking for dlopen in -ldl... yes
checking for sin in -lm... yes
checking for res_search... no
checking for __res_search... no
checking for res_search in -lresolv... yes
checking for inet_aton... yes
checking for dn_skipname... no
checking for __dn_skipname... yes
checking for ANSI C header files... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for inttypes.h... yes
checking for stdint.h... yes
checking for dirent.h... yes
checking for ApplicationServices/ApplicationServices.h... no
checking for sys/param.h... yes
checking for sys/types.h... yes
checking for sys/time.h... yes
checking for netinet/in.h... yes
checking for alloca.h... yes
checking for arpa/inet.h... yes
checking for arpa/nameser.h... yes
checking for assert.h... yes
checking for crypt.h... yes
checking for fcntl.h... yes
checking for grp.h... yes
checking for ieeefp.h... no
checking for langinfo.h... yes
checking for limits.h... yes
checking for locale.h... yes
checking for monetary.h... yes
checking for mach-o/dyld.h... no
checking for netdb.h... yes
checking for pwd.h... yes
checking for resolv.h... yes
checking for signal.h... yes
checking for stdarg.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for syslog.h... yes
checking for sysexits.h... yes
checking for sys/ioctl.h... yes
checking for sys/file.h... yes
checking for sys/mman.h... yes
checking for sys/mount.h... yes
checking for sys/poll.h... yes
checking for sys/resource.h... yes
checking for sys/select.h... yes
checking for sys/socket.h... yes
checking for sys/stat.h... yes
checking for sys/statfs.h... yes
checking for sys/statvfs.h... yes
checking for sys/vfs.h... yes
checking for sys/sysexits.h... no
checking for sys/varargs.h... no
checking for sys/wait.h... yes
checking for sys/loadavg.h... no
checking for termios.h... yes
checking for unistd.h... yes
checking for unix.h... no
checking for utime.h... yes
checking for sys/utsname.h... yes
checking for sys/ipc.h... yes
checking for dlfcn.h... yes
checking for assert.h... (cached) yes
checking for fopencookie... yes
checking for broken getcwd... no
checking for broken libc stdio... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for struct tm.tm_zone... yes
checking for missing declarations of reentrant functions... done
checking for fclose declaration... ok
checking for tm_gmtoff in struct tm... yes
checking for struct flock... yes
checking for socklen_t... yes
checking for size_t... yes
checking size of size_t... 4
checking for long long... yes
checking size of long long... 8
checking for long long int... yes
checking size of long long int... 8
checking for long... yes
checking size of long... 4
checking for int... yes
checking size of int... 4
checking size of intmax_t... 8
checking size of ssize_t... 4
checking size of ptrdiff_t... 4
checking for struct stat.st_blksize... yes
checking for struct stat.st_blocks... yes
checking for struct stat.st_rdev... yes
checking for size_t... (cached) yes
checking for uid_t in sys/types.h... yes
checking for struct sockaddr_storage... yes
checking for field sa_len in struct sockaddr... no
checking for IPv6 support... yes
checking for vprintf... yes
checking for _doprnt... no
checking for alphasort... yes
checking for asctime_r... yes
checking for chroot... yes
checking for ctime_r... yes
checking for cuserid... yes
checking for crypt... no
checking for flock... yes
checking for ftok... yes
checking for funopen... no
checking for gai_strerror... yes
checking for gcvt... yes
checking for getloadavg... yes
checking for getlogin... yes
checking for getprotobyname... yes
checking for getprotobynumber... yes
checking for getservbyname... yes
checking for getservbyport... yes
checking for getrusage... yes
checking for gettimeofday... yes
checking for gmtime_r... yes
checking for getpwnam_r... yes
checking for getgrnam_r... yes
checking for getpwuid_r... yes
checking for grantpt... yes
checking for inet_ntoa... yes
checking for inet_ntop... yes
checking for inet_pton... yes
checking for isascii... yes
checking for link... yes
checking for localtime_r... yes
checking for lockf... yes
checking for lchown... yes
checking for lrand48... yes
checking for memcpy... yes
checking for memmove... yes
checking for mkstemp... yes
checking for mmap... yes
checking for nl_langinfo... yes
checking for perror... yes
checking for poll... yes
checking for ptsname... yes
checking for putenv... yes
checking for realpath... yes
checking for random... yes
checking for rand_r... yes
checking for regcomp... yes
checking for res_search... (cached) yes
checking for scandir... yes
checking for setitimer... yes
checking for setlocale... yes
checking for localeconv... yes
checking for setenv... yes
checking for setpgid... yes
checking for setsockopt... yes
checking for setvbuf... yes
checking for shutdown... yes
checking for sin... yes
checking for snprintf... yes
checking for srand48... yes
checking for srandom... yes
checking for statfs... yes
checking for statvfs... yes
checking for std_syslog... no
checking for strcasecmp... yes
checking for strcoll... yes
checking for strdup... yes
checking for strerror... yes
checking for strftime... yes
checking for strptime... yes
checking for strstr... yes
checking for strtok_r... yes
checking for symlink... yes
checking for tempnam... yes
checking for tzset... yes
checking for unlockpt... yes
checking for unsetenv... yes
checking for usleep... yes
checking for nanosleep... yes
checking for utime... yes
checking for vsnprintf... yes
checking for getaddrinfo... yes
checking for strlcat... no
checking for strlcpy... no
checking for getopt... yes
checking for utime.h... (cached) yes
checking whether utime accepts a null argument... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for declared timezone... yes
checking for type of reentrant time-related functions... POSIX
checking for readdir_r... yes
checking for type of readdir_r... POSIX
checking for in_addr_t... yes
checking for crypt_r... no

[1mGeneral settings[m
checking whether to include gcov symbols... no
checking whether to include debugging symbols... no
checking layout of installed files... PHP
checking path to configuration file... /etc/php/-php5
checking where to scan for configuration files... /etc/php/-php5/ext-active
checking whether to enable safe mode by default... no
checking for safe mode exec dir... /usr/local/php/bin
checking whether to enable PHP's own SIGCHLD handler... no
checking whether to enable magic quotes by default... no
checking whether to explicitly link against libgcc... no
checking whether to enable short tags by default... yes
checking whether to enable dmalloc... no
checking whether to enable IPv6 support... no
checking how big to make fd sets... using system default

[1mConfiguring extensions[m
checking whether to enable LIBXML support... yes
checking libxml2 install dir... no
checking for xml2-config path... /usr/bin/xml2-config
checking whether libxml build works... yes
checking for OpenSSL support... yes
checking for Kerberos support... no
checking for DSA_get_default_method in -lssl... yes
checking for pkg-config... /usr/bin/pkg-config
checking for PCRE support... yes
checking for ZLIB support... yes
checking if the location of ZLIB install directory is defined... no
checking for gzgets in -lz... yes
checking whether to enable bc style precision math functions... no
checking for BZip2 support... yes
checking for BZip2 in default path... found in /usr
checking for BZ2_bzerror in -lbz2... yes
checking whether to enable calendar conversion support... no
checking whether to enable ctype functions... yes
checking for cURL support... yes
checking if we should use cURL for url streams... no
checking for cURL in default path... found in /usr
checking for cURL 7.10.5 or greater... libcurl 7.17.1
checking for SSL support in libcurl... yes
checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E
checking for openssl support in libcurl... yes
checking openssl/crypto.h usability... yes
checking openssl/crypto.h presence... yes
checking for openssl/crypto.h... yes
checking for gnutls support in libcurl... no
checking for curl_easy_perform in -lcurl... yes
checking for curl_version_info in -lcurl... yes
checking for curl_easy_strerror in -lcurl... yes
checking for curl_multi_strerror in -lcurl... yes
checking for long... (cached) yes
checking size of long... (cached) 4
checking for int... (cached) yes
checking size of int... (cached) 4
checking for int32_t... yes
checking for uint32_t... yes
checking for sys/types.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for string.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for strtoll... yes
checking for atoll... yes
checking for strftime... (cached) yes
checking for QDBM support... no
checking for gdbm_open in -lgdbm... yes
checking for GDBM support... yes
checking for NDBM support... no
checking for db4 minor version and patch level... ok
checking for Berkeley DB4 support... yes
checking for Berkeley DB3 support... no
checking for Berkeley DB2 support... no
checking for DB1 support... no
checking for DBM support... no
checking for CDB support... no
checking for INI File support... builtin
checking for FlatFile support... builtin
checking whether to enable DBA interface... yes
checking whether to enable dbase support... no
checking whether to enable DOM support... yes
checking for xml2-config path... (cached) /usr/bin/xml2-config
checking whether libxml build works... (cached) yes
checking whether to enable EXIF (metadata from images) support... yes
checking for FrontBase SQL92 (fbsql) support... no
checking for FDF support... no
checking whether to enable input filter support... no
checking pcre install prefix... no
checking whether to enable FTP support... yes
checking OpenSSL dir for FTP... /usr
checking for GD support... yes
checking for the location of libjpeg... /usr
checking for the location of libpng... /usr
checking for the location of libXpm... no
checking for FreeType 1.x support... no
checking for FreeType 2... no
checking for T1lib support... no
checking whether to enable truetype string function in GD... no
checking whether to enable JIS-mapped Japanese font support in GD... no
checking for fabsf... yes
checking for floorf... yes
checking for jpeg_read_header in -ljpeg... yes
checking for png_write_image in -lpng... yes
If configure fails try --with-xpm-dir=<DIR>
If configure fails try --with-freetype-dir=<DIR>
checking for GNU gettext support... yes
checking for bindtextdomain in -lintl... no
checking for bindtextdomain in -lc... yes
checking for ngettext in -lc... yes
checking for dngettext in -lc... yes
checking for dcngettext in -lc... yes
checking for bind_textdomain_codeset in -lc... yes
checking for GNU MP support... no
checking whether to enable hash support... no
checking for iconv support... yes
checking for iconv... yes
checking if iconv is glibc's... yes
checking if iconv supports errno... yes
checking if your cpp allows macro usage in include lines... yes
checking for IMAP support... yes
checking for IMAP Kerberos support... no
checking for IMAP SSL support... yes
checking for utf8_mime2text signature... old
checking for U8T_CANONICAL... no
checking for pam_start in -lpam... yes
checking for crypt in -lcrypt... yes
checking whether build with IMAP works... yes
checking for InterBase support... no
checking whether to enable JavaScript Object Serialization support... no
checking for LDAP support... yes
checking for LDAP Cyrus SASL support... no
configure: error: Cannot find ldap.h
 [31;01m*[0m 
 [31;01m*[0m ERROR: dev-lang/php-5.2.6_rc3 failed.
 [31;01m*[0m Call stack:
 [31;01m*[0m               ebuild.sh, line   49:  Called src_compile
 [31;01m*[0m             environment, line 4343:  Called src_compile_fastbuild
 [31;01m*[0m             environment, line 4391:  Called php5_2-sapi_src_compile
 [31;01m*[0m             environment, line 3392:  Called die
 [31;01m*[0m The specific snippet of code:
 [31;01m*[0m       ./configure --prefix=${destdir} --host=${CHOST} --mandir=${destdir}/man --infodir=${destdir}/info --sysconfdir=/etc --cache-file=./config.cache ${my_conf} ${EXTRA_ECONF} || die "configure failed";
 [31;01m*[0m  The die message:
 [31;01m*[0m   configure failed
 [31;01m*[0m 
 [31;01m*[0m If you need support, post the topmost build error, and the call stack if relevant.
 [31;01m*[0m A complete build log is located at '/var/log/portage/dev-lang:php-5.2.6_rc3:20080408-181618.log'.
 [31;01m*[0m The ebuild environment file is located at '/mnt/other/tmp/portage/tmp/portage/dev-lang/php-5.2.6_rc3/temp/environment'.
 [31;01m*[0m