dkim-filter.conf

dkim-filter.conf (text/plain), 8.56 KB, created by Craig Andrews on 2008-04-06 05:03:30 UTC

##
## dkim-filter.conf -- configuration file for DKIM filter
##
## $Id: dkim-filter.conf.sample,v 1.13 2007/12/14 07:22:19 msk Exp $
##

##  AlwaysSignHeaders header-list
##  	default (none)
##
##  Specifies a list of headers whose names should appear in signatures
##  whether or not they were signed, preventing their later addition.

# AlwaysSignHeaders	header1:header2:...

##  AutoRestart { yes | no }
##  	default "no"
##
##  Indicate whether or not the filter should arrange to restart automatically
##  if it crashes.

AutoRestart		Yes

##  BodyLengths { yes | no }
##  	default "no"
##
##  Indicate whether or not signatures with body length tags should be
##  generated.

# BodyLengths		No

##  Canonicalization hdrcanon[/bodycanon]
##  	default "simple/simple"
##
##  Select canonicalizations to use when signing.  If the "bodycanon" is
##  omitted, "simple" is used.  Valid values for each are "simple" and
##  "relaxed".

# Canonicalization	simple/simple

##  ClockDrift n
##  	default 300
##
##  Specify the tolerance range for expired signatures or signatures
##  which appear to have timestamps in the future, allowing for clock
##  drift.

# ClockDrift		300 

##  Diagnostics { yes | no }
##  	default "no"
##
##  Specifies whether or not signatures with header diagnostic tags should
##  be generated.

# Diagnostics		No

##  DNSTimeout n
##  	default 10
##
##  Specify the time in seconds to wait for replies from the nameserver when
##  requesting keys or signing policies.

# DNSTimeout		10

##  Domain name[,...]
##
##  Specify for which domain(s) signing should be done.  No default; must
##  be specified for signing.

Domain			integralblue.com

##  ExternalIgnoreList filename
##
##  Names a file from which a list of externally-trusted hosts is read.
##  These are hosts which are allowed to send mail through you for signing.
##  Automatically contains 127.0.0.1.  See man page for file format.

# ExternalIgnoreList	filename

##  KeyFile filename
##
##  Specifies the path to the private key to use when signing.  Ignored if
##  Keylist is set.  No default; must be specified for signing.

KeyFile			/etc/mail/dkim-filter/irrational.private

##  KeyList filename
##
##  Specifies the path to the list of keys and signing domains to be applied
##  by the signing filter.  The entries in this file should be of the form:
##
##  	pattern:domain:keypath
##
##  ...where "pattern" is a pattern of user@host to match, with "*" being
##  allowed as a wildcard; "domain" is the signing domain; and "keypath"
##  is the path to the private key to use to generate signatures for such
##  users.  The selector used will be the filename portion of "keypath".
##  Blank lines are ignored, and the hash ("#") character is interpreted
##  as the beginning of a comment.  See dkim-filter.conf(5) for more
##  information.

# KeyList		/etc/mail/dkim-filter/keylist

##  InternalHosts filename
##
##  Names a file from which a list of internal hosts is read.  These are
##  hosts from which mail should be signed rather than verified.
##  Automatically contains 127.0.0.1.  See man page for file format.

# InternalHosts		/etc/mail/dkim-filter/internalhosts

##  MacroList macro[=value][,...]
##
##  Gives a set of MTA-provided macros which should be checked to see
##  if the sender has been determined to be a local user and therefore
##  whether or not signing should be done.  See dkim-filter.conf(5) for
##  more information.

# Macrolist		foo=bar,baz=blivit

##  MaximumHeaders n
##
##  Disallow messages whose header blocks are bigger than "n" bytes.
##  Intended to detect and block a denial-of-service attack.  The default
##  is 65536.  A value of 0 disables this test.

# MaximumHeaders	n

##  MaximumSignedBytes n
##
##  Don't sign more than "n" bytes of the message.  The default is to 
##  sign the entire message.  Setting this implies "BodyLengths".

# MaximumSignedBytes	n

##  Minimum n[% | +]
##  	default 0
##
##  Sets a minimum signing volume; one of the following formats:
##	n	at least n bytes (or the whole message, whichever is less)
##		must be signed
##  	n%	at least n% of the message must be signed
##	n+	if a length limit was presented in the signature, no more than
##  		n bytes may have been added

# Minimum		n

##  Mode [sv]
##  	default sv
##
##  Indicates which mode(s) of operation should be provided.  "s" means
##  "sign", "v" means "verify".

# Mode			sv

##  MTA mtaname[,...]
##  
##  Specifies a list of MTAs whos mail should always be signed rather than
##  verified.  The "mtaname" is extracted from the DaemonPortOptions line
##  in effect.

# MTA			name

##  OmitHeaders
##  	default (none)
##
##  Specifies a list of headers that should always be omitted when signing.
##  Header names should be separated by commas.

# OmitHeaders		header1,header2,...

##  On-...
##
##  Specifies what to do when certain error conditions are encountered.
##
##  See dkim-filter.conf(5) for more information.

# On-Default
# On-BadSignature
# On-DNSError
# On-InternalError
# On-NoSignature
# On-Security
# On-SignatureMissing

##  PeerList filename
##
##  Contains a list of IP addresses, CIDR blocks, hostnames or domain names
##  whose mail should be neither signed nor verified by this filter.  See man
##  page for file format.

# PeerList		filename

##  Quarantine { yes | no }
##  	default "no"
##
##  Indicates whether or not the filter should arrange to quarantine mail
##  which fails verification.  Intended for diagnostic use only.

# Quarantine		No

##  RemoveARAll { yes | no }
##  	default "no"
##
##  Remove all Authentication-Results: headers on all arriving mail.

# RemoveARAll		No

##  RemoveARFrom list
##  	default (none)
##
##  Remove all Authentication-Results: headers on all arriving mail that
##  claim to have been added by hosts listed in this parameter.  The list
##  should be comma-separated.  Entire domains may be specified by preceding
##  the dopmain name by a single dot (".") character.

# RemoveARFrom		host1,host2,.domain1,.domain2,...

##  RemoveOldSignatures { yes | no }
##  	default "no"
##
##  Remove old signatures on messages, if any, when generating a signature.

# RemoveOldSignatures	No

##  Selector name
##
##  The name of the selector to use when signing.  No default; must be
##  specified for signing.

Selector		irrational

##  SendReports { yes | no }
##  	default "no"
##
##  Specifies whether or not the filter should generate report mail back
##  to senders when verification fails and an address for such a purpose
##  is provided.  See dkim-filter.conf(5) for details.

# SendReports		No

##  SignatureAlgorithm signalg
##  	default "rsa-sha256"
##
##  Signature algorithm to use when generating signatures.  Must be either
##  "rsa-sha1" or "rsa-sha256".

# SignatureAlgorithm	rsa-sha256

##  SignatureTTL seconds
##  	default "0"
##
##  Specifies the lifetime in seconds of signatures generated by the
##  filter.  A value of 0 means no expiration time is included in the
##  signature.

# SignatureTTL		0

##  Socket socketspec
##
##  Names the socket where this filter should listen for milter connections
##  from the MTA.  Required.  Should be in one of these forms:
##
##  inet:port@address		to listen on a specific interface
##  inet:port			to listen on all interfaces
##  local:/path/to/socket	to listen on a UNIX domain socket

Socket			local:/var/run/dkim-filter/dkim-filter.sock

##  SubDomains { yes | no }
##  	default "no"
##
##  Sign for subdomains as well?

# SubDomains		No

##  Syslog { yes | no }
##  	default "no"
##
##  Log informational and error activity to syslog?

# Syslog		No

##  SyslogSuccess { yes | no }
##  	default "no"
##
##  Log success activity to syslog?

# SyslogSuccess		No

##  UMask mask
##  	default (none)
##
##  Change the process umask for file creation to the specified value.
##  The system has its own default which will be used (usually 022).
##  See the umask(2) man page for more information.

UMask			002

##  Userid userid
##  	default (none)
##
##  Change to user "userid" before starting normal operation?  May include
##  a group ID as well, separated from the userid by a colon.

UserID		milter

##  UseSSPDeny { yes | no }
##  	default "no"
##
##  Reject messages which are determined to be "suspicious" according to the
##  sending domain's published signing procedure (SSP) record if that record
##  also recommends rejection of such messages.

# UseSSPDeny		No

##  X-Header { yes | no }
##  	default "no"
##
##  Add an X- header to messages passing through this filter to identify
##  messages it has processed.

X-Header		Yes

##  Statistics filename
##
##  Names a file to which useful statistics will be saved.
##  See man dkim-stats page

Statistics		/var/run/dkim-filter/dkim-filter.stats