the suspend with only the magic number when i want 30 sec after suspend and before shutdown

suspend6 (text/plain), 94.19 KB, created by GNUtoo on 2008-03-03 16:47:36 UTC

Linux version 2.6.24-gentoo-r2_port4 (root@port4) (gcc version 4.2.2 (Gentoo 4.2.2 p1.0)) #5 PREEMPT Thu Feb 21 20:08:40 CET 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
 BIOS-e820: 000000003fe80000 - 000000003fe8e000 (ACPI data)
 BIOS-e820: 000000003fe8e000 - 000000003ff00000 (ACPI NVS)
 BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
 BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
Entering add_active_range(0, 0, 229376) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   229376
On node 0 totalpages: 229376
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F63B0, 0014 (r0 PTLTD )
ACPI: RSDT 3FE87334, 0040 (r1 SONY   X5        6040000  LTP        0)
ACPI: FACP 3FE8DEB0, 0084 (r2 SONY   X5        6040000 LOHR 20050429)
ACPI: DSDT 3FE87B78, 6338 (r1 SONY   X5        6040000 MSFT  2000001)
ACPI: FACS 3FE9EFC0, 0040
ACPI: APIC 3FE8DF34, 0068 (r1 INTEL  ALVISO    6040000 LOHR       5F)
ACPI: MCFG 3FE8DF9C, 003C (r1 INTEL  ALVISO    6040000 LOHR       5F)
ACPI: BOOT 3FE8DFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 3FE87733, 0277 (r1  PmRef  Cpu0Ist     3000 INTL 20030224)
ACPI: SSDT 3FE8758D, 01A6 (r1  PmRef  Cpu0Cst     3001 INTL 20030224)
ACPI: SSDT 3FE87374, 0219 (r1  PmRef    CpuPm     3000 INTL 20030224)
ACPI: DMI detected: Sony
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227584
Kernel command line: root=/dev/md3 VGA=0x31F position_fix
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0a91000 soft=c0a90000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.051 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 898696k/917504k available (6707k kernel code, 18324k reserved, 2750k data, 316k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
    vmalloc : 0xf8800000 - 0xfffb3000   ( 119 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0a3e000 - 0xc0a8d000   ( 316 kB)
      .data : 0xc078ceb0 - 0xc0a3c720   (2750 kB)
      .text : 0xc0100000 - 0xc078ceb0   (6707 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3992.45 BogoMIPS (lpj=1996226)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 744 Objects with 74 Devices 222 Methods 25 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 5 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 1 Objects with 0 Devices 1 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 10 Objects with 0 Devices 2 Methods 0 Regions
 tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
PM: Adding info for No Bus:platform
net_namespace: 64 bytes
Time: 17:40:02  Date: 03/03/08
NET: Registered protocol family 16
PM: Adding info for No Bus:vtcon0
ACPI: bus type pci registered
PM: Adding info for No Bus:id
PCI: Using MMCONFIG
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 4 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:............................................................
Initialized 22/25 Regions 3/3 Fields 22/23 Buffers 13/19 Packages (769 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:....
Executed 4 _INI methods requiring 3 _STA executions (examined 79 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
PM: Adding info for acpi:LNXSYSTM:00
PM: Adding info for acpi:LNXPWRBN:00
PM: Adding info for acpi:ACPI0007:00
PM: Adding info for acpi:ACPI0007:01
PM: Adding info for acpi:device:00
PM: Adding info for acpi:PNP0A08:00
PM: Adding info for acpi:PNP0C02:00
PM: Adding info for acpi:device:01
PM: Adding info for acpi:LNXVIDEO:00
PM: Adding info for acpi:device:02
PM: Adding info for acpi:device:03
PM: Adding info for acpi:device:04
PM: Adding info for acpi:device:05
PM: Adding info for acpi:device:06
PM: Adding info for acpi:device:07
PM: Adding info for acpi:device:08
PM: Adding info for acpi:device:09
PM: Adding info for acpi:device:0a
PM: Adding info for acpi:device:0b
PM: Adding info for acpi:device:0c
PM: Adding info for acpi:device:0d
PM: Adding info for acpi:device:0e
PM: Adding info for acpi:device:0f
PM: Adding info for acpi:device:10
PM: Adding info for acpi:device:11
PM: Adding info for acpi:device:12
PM: Adding info for acpi:device:13
PM: Adding info for acpi:device:14
PM: Adding info for acpi:device:15
PM: Adding info for acpi:device:16
PM: Adding info for acpi:device:17
PM: Adding info for acpi:device:18
PM: Adding info for acpi:device:19
PM: Adding info for acpi:device:1a
PM: Adding info for acpi:device:1b
PM: Adding info for acpi:device:1c
PM: Adding info for acpi:device:1d
PM: Adding info for acpi:device:1e
PM: Adding info for acpi:device:1f
PM: Adding info for acpi:PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:07
PM: Adding info for acpi:PNP0C09:00
PM: Adding info for acpi:PNP0200:00
PM: Adding info for acpi:PNP0000:00
PM: Adding info for acpi:PNP0C04:00
PM: Adding info for acpi:PNP0C02:01
PM: Adding info for acpi:PNP0B00:00
PM: Adding info for acpi:PNP0100:00
PM: Adding info for acpi:PNP0303:00
PM: Adding info for acpi:SNY900D:00
PM: Adding info for acpi:SNY5001:00
PM: Adding info for acpi:IFX0101:00
PM: Adding info for acpi:device:20
PM: Adding info for acpi:device:21
PM: Adding info for acpi:device:22
PM: Adding info for acpi:device:23
PM: Adding info for acpi:device:24
PM: Adding info for acpi:device:25
PM: Adding info for acpi:device:26
PM: Adding info for acpi:device:27
PM: Adding info for acpi:device:28
PM: Adding info for acpi:ACPI0003:00
PM: Adding info for acpi:PNP0C0A:00
PM: Adding info for acpi:PNP0C0D:00
PM: Adding info for acpi:PNP0C0C:00
PM: Adding info for acpi:LNXTHERM:00
PM: Adding info for acpi:LNXTHERM:01
ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PM: Adding info for No Bus:pci0000:00
Force enabled HPET at base address 0xfed00000
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:1b.0
PM: Adding info for pci:0000:00:1c.0
PM: Adding info for pci:0000:00:1c.1
PM: Adding info for pci:0000:00:1d.0
PM: Adding info for pci:0000:00:1d.1
PM: Adding info for pci:0000:00:1d.2
PM: Adding info for pci:0000:00:1d.3
PM: Adding info for pci:0000:00:1d.7
PM: Adding info for pci:0000:00:1e.0
PM: Adding info for pci:0000:00:1f.0
PM: Adding info for pci:0000:00:1f.2
PM: Adding info for pci:0000:00:1f.3
PM: Adding info for pci:0000:01:00.0
PM: Adding info for pci:0000:03:00.0
PM: Adding info for pci:0000:06:08.0
PM: Adding info for pci:0000:06:09.0
PM: Adding info for pci:0000:06:09.2
PM: Adding info for pci:0000:06:09.3
PM: Adding info for pci:0000:06:0a.0
PM: Adding info for pci:0000:06:0b.0
PM: Adding info for pci:0000:06:0b.1
PM: Adding info for pci:0000:06:0b.2
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
ACPI: bus type pnp registered
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Bluetooth: Core ver 2.11
PM: Adding info for platform:bluetooth
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 8
NET: Registered protocol family 20
hpet clockevent registered
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:kmem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:port
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x680-0x6ff has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11bf has been reserved
system 00:04: ioport range 0x1600-0x167f has been reserved
system 00:04: ioport range 0xfe00-0xfe01 has been reserved
PM: Adding info for No Bus:lo
PCI: Bridge: 0000:00:01.0
  IO window: 5000-5fff
  MEM window: b8100000-b81fffff
  PREFETCH window: c8000000-cfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 6000-6fff
  MEM window: bc000000-bfffffff
  PREFETCH window: d0000000-d3ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 7000-7fff
  MEM window: c0000000-c3ffffff
  PREFETCH window: d4000000-d7ffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
  IO window: 00008400-000084ff
  IO window: 00008800-000088ff
  PREFETCH window: 50000000-53ffffff
  MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 8000-8fff
  MEM window: c4000000-c40fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 20 (level, low) -> IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x1
PM: Adding info for No Bus:msr0
PM: Adding info for No Bus:cpu0
PM: Adding info for No Bus:microcode
PM: Adding info for platform:microcode
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
PM: Adding info for platform:pcspkr
audit: initializing netlink socket (disabled)
audit(1204566001.169:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
PM: Adding info for No Bus:dlm-control
DLM (built Feb 21 2008 19:22:08) installed
squashfs: version 3.3 (2007/10/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 [e-mail]).
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.9)
PM: Adding info for No Bus:fuse
SELinux:  Registering netfilter hooks
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PM: Adding info for pci_express:0000:00:01.0:pcie00
Allocate Port Service[0000:00:01.0:pcie03]
PM: Adding info for pci_express:0000:00:01.0:pcie03
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PM: Adding info for pci_express:0000:00:1c.0:pcie00
Allocate Port Service[0000:00:1c.0:pcie02]
PM: Adding info for pci_express:0000:00:1c.0:pcie02
Allocate Port Service[0000:00:1c.0:pcie03]
PM: Adding info for pci_express:0000:00:1c.0:pcie03
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
PM: Adding info for pci_express:0000:00:1c.1:pcie00
Allocate Port Service[0000:00:1c.1:pcie02]
PM: Adding info for pci_express:0000:00:1c.1:pcie02
Allocate Port Service[0000:00:1c.1:pcie03]
PM: Adding info for pci_express:0000:00:1c.1:pcie03
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:ptmx
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
PM: Adding info for No Bus:ptyp0
PM: Adding info for No Bus:ptyp1
PM: Adding info for No Bus:ptyp2
PM: Adding info for No Bus:ptyp3
PM: Adding info for No Bus:ptyp4
PM: Adding info for No Bus:ptyp5
PM: Adding info for No Bus:ptyp6
PM: Adding info for No Bus:ptyp7
PM: Adding info for No Bus:ptyp8
PM: Adding info for No Bus:ptyp9
PM: Adding info for No Bus:ptypa
PM: Adding info for No Bus:ptypb
PM: Adding info for No Bus:ptypc
PM: Adding info for No Bus:ptypd
PM: Adding info for No Bus:ptype
PM: Adding info for No Bus:ptypf
PM: Adding info for No Bus:ptyq0
PM: Adding info for No Bus:ptyq1
PM: Adding info for No Bus:ptyq2
PM: Adding info for No Bus:ptyq3
PM: Adding info for No Bus:ptyq4
PM: Adding info for No Bus:ptyq5
PM: Adding info for No Bus:ptyq6
PM: Adding info for No Bus:ptyq7
PM: Adding info for No Bus:ptyq8
PM: Adding info for No Bus:ptyq9
PM: Adding info for No Bus:ptyqa
PM: Adding info for No Bus:ptyqb
PM: Adding info for No Bus:ptyqc
PM: Adding info for No Bus:ptyqd
PM: Adding info for No Bus:ptyqe
PM: Adding info for No Bus:ptyqf
PM: Adding info for No Bus:ptyr0
PM: Adding info for No Bus:ptyr1
PM: Adding info for No Bus:ptyr2
PM: Adding info for No Bus:ptyr3
PM: Adding info for No Bus:ptyr4
PM: Adding info for No Bus:ptyr5
PM: Adding info for No Bus:ptyr6
PM: Adding info for No Bus:ptyr7
PM: Adding info for No Bus:ptyr8
PM: Adding info for No Bus:ptyr9
PM: Adding info for No Bus:ptyra
PM: Adding info for No Bus:ptyrb
PM: Adding info for No Bus:ptyrc
PM: Adding info for No Bus:ptyrd
PM: Adding info for No Bus:ptyre
PM: Adding info for No Bus:ptyrf
PM: Adding info for No Bus:ptys0
PM: Adding info for No Bus:ptys1
PM: Adding info for No Bus:ptys2
PM: Adding info for No Bus:ptys3
PM: Adding info for No Bus:ptys4
PM: Adding info for No Bus:ptys5
PM: Adding info for No Bus:ptys6
PM: Adding info for No Bus:ptys7
PM: Adding info for No Bus:ptys8
PM: Adding info for No Bus:ptys9
PM: Adding info for No Bus:ptysa
PM: Adding info for No Bus:ptysb
PM: Adding info for No Bus:ptysc
PM: Adding info for No Bus:ptysd
PM: Adding info for No Bus:ptyse
PM: Adding info for No Bus:ptysf
PM: Adding info for No Bus:ptyt0
PM: Adding info for No Bus:ptyt1
PM: Adding info for No Bus:ptyt2
PM: Adding info for No Bus:ptyt3
PM: Adding info for No Bus:ptyt4
PM: Adding info for No Bus:ptyt5
PM: Adding info for No Bus:ptyt6
PM: Adding info for No Bus:ptyt7
PM: Adding info for No Bus:ptyt8
PM: Adding info for No Bus:ptyt9
PM: Adding info for No Bus:ptyta
PM: Adding info for No Bus:ptytb
PM: Adding info for No Bus:ptytc
PM: Adding info for No Bus:ptytd
PM: Adding info for No Bus:ptyte
PM: Adding info for No Bus:ptytf
PM: Adding info for No Bus:ptyu0
PM: Adding info for No Bus:ptyu1
PM: Adding info for No Bus:ptyu2
PM: Adding info for No Bus:ptyu3
PM: Adding info for No Bus:ptyu4
PM: Adding info for No Bus:ptyu5
PM: Adding info for No Bus:ptyu6
PM: Adding info for No Bus:ptyu7
PM: Adding info for No Bus:ptyu8
PM: Adding info for No Bus:ptyu9
PM: Adding info for No Bus:ptyua
PM: Adding info for No Bus:ptyub
PM: Adding info for No Bus:ptyuc
PM: Adding info for No Bus:ptyud
PM: Adding info for No Bus:ptyue
PM: Adding info for No Bus:ptyuf
PM: Adding info for No Bus:ptyv0
PM: Adding info for No Bus:ptyv1
PM: Adding info for No Bus:ptyv2
PM: Adding info for No Bus:ptyv3
PM: Adding info for No Bus:ptyv4
PM: Adding info for No Bus:ptyv5
PM: Adding info for No Bus:ptyv6
PM: Adding info for No Bus:ptyv7
PM: Adding info for No Bus:ptyv8
PM: Adding info for No Bus:ptyv9
PM: Adding info for No Bus:ptyva
PM: Adding info for No Bus:ptyvb
PM: Adding info for No Bus:ptyvc
PM: Adding info for No Bus:ptyvd
PM: Adding info for No Bus:ptyve
PM: Adding info for No Bus:ptyvf
PM: Adding info for No Bus:ptyw0
PM: Adding info for No Bus:ptyw1
PM: Adding info for No Bus:ptyw2
PM: Adding info for No Bus:ptyw3
PM: Adding info for No Bus:ptyw4
PM: Adding info for No Bus:ptyw5
PM: Adding info for No Bus:ptyw6
PM: Adding info for No Bus:ptyw7
PM: Adding info for No Bus:ptyw8
PM: Adding info for No Bus:ptyw9
PM: Adding info for No Bus:ptywa
PM: Adding info for No Bus:ptywb
PM: Adding info for No Bus:ptywc
PM: Adding info for No Bus:ptywd
PM: Adding info for No Bus:ptywe
PM: Adding info for No Bus:ptywf
PM: Adding info for No Bus:ptyx0
PM: Adding info for No Bus:ptyx1
PM: Adding info for No Bus:ptyx2
PM: Adding info for No Bus:ptyx3
PM: Adding info for No Bus:ptyx4
PM: Adding info for No Bus:ptyx5
PM: Adding info for No Bus:ptyx6
PM: Adding info for No Bus:ptyx7
PM: Adding info for No Bus:ptyx8
PM: Adding info for No Bus:ptyx9
PM: Adding info for No Bus:ptyxa
PM: Adding info for No Bus:ptyxb
PM: Adding info for No Bus:ptyxc
PM: Adding info for No Bus:ptyxd
PM: Adding info for No Bus:ptyxe
PM: Adding info for No Bus:ptyxf
PM: Adding info for No Bus:ptyy0
PM: Adding info for No Bus:ptyy1
PM: Adding info for No Bus:ptyy2
PM: Adding info for No Bus:ptyy3
PM: Adding info for No Bus:ptyy4
PM: Adding info for No Bus:ptyy5
PM: Adding info for No Bus:ptyy6
PM: Adding info for No Bus:ptyy7
PM: Adding info for No Bus:ptyy8
PM: Adding info for No Bus:ptyy9
PM: Adding info for No Bus:ptyya
PM: Adding info for No Bus:ptyyb
PM: Adding info for No Bus:ptyyc
PM: Adding info for No Bus:ptyyd
PM: Adding info for No Bus:ptyye
PM: Adding info for No Bus:ptyyf
PM: Adding info for No Bus:ptyz0
PM: Adding info for No Bus:ptyz1
PM: Adding info for No Bus:ptyz2
PM: Adding info for No Bus:ptyz3
PM: Adding info for No Bus:ptyz4
PM: Adding info for No Bus:ptyz5
PM: Adding info for No Bus:ptyz6
PM: Adding info for No Bus:ptyz7
PM: Adding info for No Bus:ptyz8
PM: Adding info for No Bus:ptyz9
PM: Adding info for No Bus:ptyza
PM: Adding info for No Bus:ptyzb
PM: Adding info for No Bus:ptyzc
PM: Adding info for No Bus:ptyzd
PM: Adding info for No Bus:ptyze
PM: Adding info for No Bus:ptyzf
PM: Adding info for No Bus:ptya0
PM: Adding info for No Bus:ptya1
PM: Adding info for No Bus:ptya2
PM: Adding info for No Bus:ptya3
PM: Adding info for No Bus:ptya4
PM: Adding info for No Bus:ptya5
PM: Adding info for No Bus:ptya6
PM: Adding info for No Bus:ptya7
PM: Adding info for No Bus:ptya8
PM: Adding info for No Bus:ptya9
PM: Adding info for No Bus:ptyaa
PM: Adding info for No Bus:ptyab
PM: Adding info for No Bus:ptyac
PM: Adding info for No Bus:ptyad
PM: Adding info for No Bus:ptyae
PM: Adding info for No Bus:ptyaf
PM: Adding info for No Bus:ptyb0
PM: Adding info for No Bus:ptyb1
PM: Adding info for No Bus:ptyb2
PM: Adding info for No Bus:ptyb3
PM: Adding info for No Bus:ptyb4
PM: Adding info for No Bus:ptyb5
PM: Adding info for No Bus:ptyb6
PM: Adding info for No Bus:ptyb7
PM: Adding info for No Bus:ptyb8
PM: Adding info for No Bus:ptyb9
PM: Adding info for No Bus:ptyba
PM: Adding info for No Bus:ptybb
PM: Adding info for No Bus:ptybc
PM: Adding info for No Bus:ptybd
PM: Adding info for No Bus:ptybe
PM: Adding info for No Bus:ptybf
PM: Adding info for No Bus:ptyc0
PM: Adding info for No Bus:ptyc1
PM: Adding info for No Bus:ptyc2
PM: Adding info for No Bus:ptyc3
PM: Adding info for No Bus:ptyc4
PM: Adding info for No Bus:ptyc5
PM: Adding info for No Bus:ptyc6
PM: Adding info for No Bus:ptyc7
PM: Adding info for No Bus:ptyc8
PM: Adding info for No Bus:ptyc9
PM: Adding info for No Bus:ptyca
PM: Adding info for No Bus:ptycb
PM: Adding info for No Bus:ptycc
PM: Adding info for No Bus:ptycd
PM: Adding info for No Bus:ptyce
PM: Adding info for No Bus:ptycf
PM: Adding info for No Bus:ptyd0
PM: Adding info for No Bus:ptyd1
PM: Adding info for No Bus:ptyd2
PM: Adding info for No Bus:ptyd3
PM: Adding info for No Bus:ptyd4
PM: Adding info for No Bus:ptyd5
PM: Adding info for No Bus:ptyd6
PM: Adding info for No Bus:ptyd7
PM: Adding info for No Bus:ptyd8
PM: Adding info for No Bus:ptyd9
PM: Adding info for No Bus:ptyda
PM: Adding info for No Bus:ptydb
PM: Adding info for No Bus:ptydc
PM: Adding info for No Bus:ptydd
PM: Adding info for No Bus:ptyde
PM: Adding info for No Bus:ptydf
PM: Adding info for No Bus:ptye0
PM: Adding info for No Bus:ptye1
PM: Adding info for No Bus:ptye2
PM: Adding info for No Bus:ptye3
PM: Adding info for No Bus:ptye4
PM: Adding info for No Bus:ptye5
PM: Adding info for No Bus:ptye6
PM: Adding info for No Bus:ptye7
PM: Adding info for No Bus:ptye8
PM: Adding info for No Bus:ptye9
PM: Adding info for No Bus:ptyea
PM: Adding info for No Bus:ptyeb
PM: Adding info for No Bus:ptyec
PM: Adding info for No Bus:ptyed
PM: Adding info for No Bus:ptyee
PM: Adding info for No Bus:ptyef
PM: Adding info for No Bus:ttyp0
PM: Adding info for No Bus:ttyp1
PM: Adding info for No Bus:ttyp2
PM: Adding info for No Bus:ttyp3
PM: Adding info for No Bus:ttyp4
PM: Adding info for No Bus:ttyp5
PM: Adding info for No Bus:ttyp6
PM: Adding info for No Bus:ttyp7
PM: Adding info for No Bus:ttyp8
PM: Adding info for No Bus:ttyp9
PM: Adding info for No Bus:ttypa
PM: Adding info for No Bus:ttypb
PM: Adding info for No Bus:ttypc
PM: Adding info for No Bus:ttypd
PM: Adding info for No Bus:ttype
PM: Adding info for No Bus:ttypf
PM: Adding info for No Bus:ttyq0
PM: Adding info for No Bus:ttyq1
PM: Adding info for No Bus:ttyq2
PM: Adding info for No Bus:ttyq3
PM: Adding info for No Bus:ttyq4
PM: Adding info for No Bus:ttyq5
PM: Adding info for No Bus:ttyq6
PM: Adding info for No Bus:ttyq7
PM: Adding info for No Bus:ttyq8
PM: Adding info for No Bus:ttyq9
PM: Adding info for No Bus:ttyqa
PM: Adding info for No Bus:ttyqb
PM: Adding info for No Bus:ttyqc
PM: Adding info for No Bus:ttyqd
PM: Adding info for No Bus:ttyqe
PM: Adding info for No Bus:ttyqf
PM: Adding info for No Bus:ttyr0
PM: Adding info for No Bus:ttyr1
PM: Adding info for No Bus:ttyr2
PM: Adding info for No Bus:ttyr3
PM: Adding info for No Bus:ttyr4
PM: Adding info for No Bus:ttyr5
PM: Adding info for No Bus:ttyr6
PM: Adding info for No Bus:ttyr7
PM: Adding info for No Bus:ttyr8
PM: Adding info for No Bus:ttyr9
PM: Adding info for No Bus:ttyra
PM: Adding info for No Bus:ttyrb
PM: Adding info for No Bus:ttyrc
PM: Adding info for No Bus:ttyrd
PM: Adding info for No Bus:ttyre
PM: Adding info for No Bus:ttyrf
PM: Adding info for No Bus:ttys0
PM: Adding info for No Bus:ttys1
PM: Adding info for No Bus:ttys2
PM: Adding info for No Bus:ttys3
PM: Adding info for No Bus:ttys4
PM: Adding info for No Bus:ttys5
PM: Adding info for No Bus:ttys6
PM: Adding info for No Bus:ttys7
PM: Adding info for No Bus:ttys8
PM: Adding info for No Bus:ttys9
PM: Adding info for No Bus:ttysa
PM: Adding info for No Bus:ttysb
PM: Adding info for No Bus:ttysc
PM: Adding info for No Bus:ttysd
PM: Adding info for No Bus:ttyse
PM: Adding info for No Bus:ttysf
PM: Adding info for No Bus:ttyt0
PM: Adding info for No Bus:ttyt1
PM: Adding info for No Bus:ttyt2
PM: Adding info for No Bus:ttyt3
PM: Adding info for No Bus:ttyt4
PM: Adding info for No Bus:ttyt5
PM: Adding info for No Bus:ttyt6
PM: Adding info for No Bus:ttyt7
PM: Adding info for No Bus:ttyt8
PM: Adding info for No Bus:ttyt9
PM: Adding info for No Bus:ttyta
PM: Adding info for No Bus:ttytb
PM: Adding info for No Bus:ttytc
PM: Adding info for No Bus:ttytd
PM: Adding info for No Bus:ttyte
PM: Adding info for No Bus:ttytf
PM: Adding info for No Bus:ttyu0
PM: Adding info for No Bus:ttyu1
PM: Adding info for No Bus:ttyu2
PM: Adding info for No Bus:ttyu3
PM: Adding info for No Bus:ttyu4
PM: Adding info for No Bus:ttyu5
PM: Adding info for No Bus:ttyu6
PM: Adding info for No Bus:ttyu7
PM: Adding info for No Bus:ttyu8
PM: Adding info for No Bus:ttyu9
PM: Adding info for No Bus:ttyua
PM: Adding info for No Bus:ttyub
PM: Adding info for No Bus:ttyuc
PM: Adding info for No Bus:ttyud
PM: Adding info for No Bus:ttyue
PM: Adding info for No Bus:ttyuf
PM: Adding info for No Bus:ttyv0
PM: Adding info for No Bus:ttyv1
PM: Adding info for No Bus:ttyv2
PM: Adding info for No Bus:ttyv3
PM: Adding info for No Bus:ttyv4
PM: Adding info for No Bus:ttyv5
PM: Adding info for No Bus:ttyv6
PM: Adding info for No Bus:ttyv7
PM: Adding info for No Bus:ttyv8
PM: Adding info for No Bus:ttyv9
PM: Adding info for No Bus:ttyva
PM: Adding info for No Bus:ttyvb
PM: Adding info for No Bus:ttyvc
PM: Adding info for No Bus:ttyvd
PM: Adding info for No Bus:ttyve
PM: Adding info for No Bus:ttyvf
PM: Adding info for No Bus:ttyw0
PM: Adding info for No Bus:ttyw1
PM: Adding info for No Bus:ttyw2
PM: Adding info for No Bus:ttyw3
PM: Adding info for No Bus:ttyw4
PM: Adding info for No Bus:ttyw5
PM: Adding info for No Bus:ttyw6
PM: Adding info for No Bus:ttyw7
PM: Adding info for No Bus:ttyw8
PM: Adding info for No Bus:ttyw9
PM: Adding info for No Bus:ttywa
PM: Adding info for No Bus:ttywb
PM: Adding info for No Bus:ttywc
PM: Adding info for No Bus:ttywd
PM: Adding info for No Bus:ttywe
PM: Adding info for No Bus:ttywf
PM: Adding info for No Bus:ttyx0
PM: Adding info for No Bus:ttyx1
PM: Adding info for No Bus:ttyx2
PM: Adding info for No Bus:ttyx3
PM: Adding info for No Bus:ttyx4
PM: Adding info for No Bus:ttyx5
PM: Adding info for No Bus:ttyx6
PM: Adding info for No Bus:ttyx7
PM: Adding info for No Bus:ttyx8
PM: Adding info for No Bus:ttyx9
PM: Adding info for No Bus:ttyxa
PM: Adding info for No Bus:ttyxb
PM: Adding info for No Bus:ttyxc
PM: Adding info for No Bus:ttyxd
PM: Adding info for No Bus:ttyxe
PM: Adding info for No Bus:ttyxf
PM: Adding info for No Bus:ttyy0
PM: Adding info for No Bus:ttyy1
PM: Adding info for No Bus:ttyy2
PM: Adding info for No Bus:ttyy3
PM: Adding info for No Bus:ttyy4
PM: Adding info for No Bus:ttyy5
PM: Adding info for No Bus:ttyy6
PM: Adding info for No Bus:ttyy7
PM: Adding info for No Bus:ttyy8
PM: Adding info for No Bus:ttyy9
PM: Adding info for No Bus:ttyya
PM: Adding info for No Bus:ttyyb
PM: Adding info for No Bus:ttyyc
PM: Adding info for No Bus:ttyyd
PM: Adding info for No Bus:ttyye
PM: Adding info for No Bus:ttyyf
PM: Adding info for No Bus:ttyz0
PM: Adding info for No Bus:ttyz1
PM: Adding info for No Bus:ttyz2
PM: Adding info for No Bus:ttyz3
PM: Adding info for No Bus:ttyz4
PM: Adding info for No Bus:ttyz5
PM: Adding info for No Bus:ttyz6
PM: Adding info for No Bus:ttyz7
PM: Adding info for No Bus:ttyz8
PM: Adding info for No Bus:ttyz9
PM: Adding info for No Bus:ttyza
PM: Adding info for No Bus:ttyzb
PM: Adding info for No Bus:ttyzc
PM: Adding info for No Bus:ttyzd
PM: Adding info for No Bus:ttyze
PM: Adding info for No Bus:ttyzf
PM: Adding info for No Bus:ttya0
PM: Adding info for No Bus:ttya1
PM: Adding info for No Bus:ttya2
PM: Adding info for No Bus:ttya3
PM: Adding info for No Bus:ttya4
PM: Adding info for No Bus:ttya5
PM: Adding info for No Bus:ttya6
PM: Adding info for No Bus:ttya7
PM: Adding info for No Bus:ttya8
PM: Adding info for No Bus:ttya9
PM: Adding info for No Bus:ttyaa
PM: Adding info for No Bus:ttyab
PM: Adding info for No Bus:ttyac
PM: Adding info for No Bus:ttyad
PM: Adding info for No Bus:ttyae
PM: Adding info for No Bus:ttyaf
PM: Adding info for No Bus:ttyb0
PM: Adding info for No Bus:ttyb1
PM: Adding info for No Bus:ttyb2
PM: Adding info for No Bus:ttyb3
PM: Adding info for No Bus:ttyb4
PM: Adding info for No Bus:ttyb5
PM: Adding info for No Bus:ttyb6
PM: Adding info for No Bus:ttyb7
PM: Adding info for No Bus:ttyb8
PM: Adding info for No Bus:ttyb9
PM: Adding info for No Bus:ttyba
PM: Adding info for No Bus:ttybb
PM: Adding info for No Bus:ttybc
PM: Adding info for No Bus:ttybd
PM: Adding info for No Bus:ttybe
PM: Adding info for No Bus:ttybf
PM: Adding info for No Bus:ttyc0
PM: Adding info for No Bus:ttyc1
PM: Adding info for No Bus:ttyc2
PM: Adding info for No Bus:ttyc3
PM: Adding info for No Bus:ttyc4
PM: Adding info for No Bus:ttyc5
PM: Adding info for No Bus:ttyc6
PM: Adding info for No Bus:ttyc7
PM: Adding info for No Bus:ttyc8
PM: Adding info for No Bus:ttyc9
PM: Adding info for No Bus:ttyca
PM: Adding info for No Bus:ttycb
PM: Adding info for No Bus:ttycc
PM: Adding info for No Bus:ttycd
PM: Adding info for No Bus:ttyce
PM: Adding info for No Bus:ttycf
PM: Adding info for No Bus:ttyd0
PM: Adding info for No Bus:ttyd1
PM: Adding info for No Bus:ttyd2
PM: Adding info for No Bus:ttyd3
PM: Adding info for No Bus:ttyd4
PM: Adding info for No Bus:ttyd5
PM: Adding info for No Bus:ttyd6
PM: Adding info for No Bus:ttyd7
PM: Adding info for No Bus:ttyd8
PM: Adding info for No Bus:ttyd9
PM: Adding info for No Bus:ttyda
PM: Adding info for No Bus:ttydb
PM: Adding info for No Bus:ttydc
PM: Adding info for No Bus:ttydd
PM: Adding info for No Bus:ttyde
PM: Adding info for No Bus:ttydf
PM: Adding info for No Bus:ttye0
PM: Adding info for No Bus:ttye1
PM: Adding info for No Bus:ttye2
PM: Adding info for No Bus:ttye3
PM: Adding info for No Bus:ttye4
PM: Adding info for No Bus:ttye5
PM: Adding info for No Bus:ttye6
PM: Adding info for No Bus:ttye7
PM: Adding info for No Bus:ttye8
PM: Adding info for No Bus:ttye9
PM: Adding info for No Bus:ttyea
PM: Adding info for No Bus:ttyeb
PM: Adding info for No Bus:ttyec
PM: Adding info for No Bus:ttyed
PM: Adding info for No Bus:ttyee
PM: Adding info for No Bus:ttyef
lp: driver loaded but no devices found
PM: Adding info for No Bus:rtc
Real Time Clock Driver v1.12ac
PM: Adding info for No Bus:nvram
Non-volatile memory driver v1.2
intel_rng: FWH not detected
ppdev: user-space parallel port driver
Linux agpgart interface v0.102
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[drm] Initialized radeon 1.28.0 20060524 on minor 0
ipmi message handler version 39.1
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
PM: Adding info for No Bus:fbcon
PM: Adding info for platform:vesafb.0
PM: Adding info for platform:vga16fb.0
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
PM: Adding info for No Bus:fb0
PM: Adding info for No Bus:vtcon1
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
PM: Adding info for No Bus:ACAD
ACPI: AC Adapter [ACAD] (on-line)
ACPI: EC: non-query interrupt received, switching to interrupt mode
PM: Adding info for No Bus:BAT1
ACPI: Battery Slot [BAT1] (battery present)
PM: Adding info for No Bus:input0
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
PM: Adding info for No Bus:input1
input: Lid Switch as /devices/virtual/input/input1
ACPI: Lid Switch [LID]
PM: Adding info for No Bus:input2
input: Power Button (CM) as /devices/virtual/input/input2
ACPI: Power Button (CM) [PWRB]
PM: Adding info for No Bus:acpi_video0
PM: Adding info for No Bus:acpi_video1
PM: Adding info for No Bus:acpi_video2
PM: Adding info for No Bus:input3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input3
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [TZ01] (71 C)
PM: Adding info for platform:parport_pc.956
PM: Removing info for platform:parport_pc.956
PM: Adding info for platform:parport_pc.888
PM: Removing info for platform:parport_pc.888
PM: Adding info for platform:parport_pc.632
PM: Removing info for platform:parport_pc.632
PM: Adding info for No Bus:isa
Switched to high resolution mode on CPU 0
floppy0: no floppy controllers found
loop: module loaded
PM: Adding info for No Bus:pktcdvd
nbd: registered device at major 43
ACPI: PCI Interrupt 0000:06:09.3[B] -> GSI 21 (level, low) -> IRQ 19
sony-laptop: Sony Notebook Control Driver v0.5.
PM: Adding info for No Bus:input4
input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1f/SNY5001:00/input/input4
PM: Adding info for No Bus:input5
input: Sony Vaio Jogdial as /devices/virtual/input/input5
PM: Adding info for No Bus:sony
tifm_core: MMC/SD card detected in socket 0:3
PM: Adding info for tifm:tifm_sd0:3
PM: Adding info for platform:sony-laptop
Ethernet Channel Bonding Driver: v3.2.3 (December 6, 2007)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
PM: Adding info for No Bus:bond0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 0000:03:00.0: v1.20 addr 0xc0000000 irq 17 Yukon-EC (0xb6) rev 2
PM: Adding info for No Bus:eth0
sky2 eth0: addr 00:13:a9:a9:09:d4
PM: Adding info for No Bus:shaper0
PPP generic driver version 2.4.2
PM: Adding info for No Bus:ppp
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
PM: Adding info for No Bus:tun
drivers/net/usb/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
console [netcon0] enabled
netconsole: network logging started
Linux video capture interface: v2.00
usbcore: registered new interface driver dabusb
drivers/media/video/dabusb.c: v1.54:DAB-USB Interface Driver for Linux (c)1999
dib0700: loaded with support for 5 different device-types
usbcore: registered new interface driver dvb_usb_dib0700
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
PM: Adding info for No Bus:host0
scsi1 : ata_piix
PM: Adding info for No Bus:host1
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4880 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4888 irq 15
ata1.00: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100
ata1.01: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
PM: Adding info for No Bus:target0:0:0
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
PM: Adding info for scsi:0:0:0:0
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
PM: Adding info for No Bus:target0:0:1
scsi 0:0:1:0: Direct-Access     ATA      TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
PM: Adding info for scsi:0:0:1:0
sd 0:0:1:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:1:0: Attached scsi generic sg1 type 0
sata_sil 0000:06:08.0: version 2.3
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 17 (level, low) -> IRQ 17
sata_sil 0000:06:08.0: Applying R_ERR on DMA activate FIS errata fix
scsi2 : sata_sil
PM: Adding info for No Bus:host2
scsi3 : sata_sil
PM: Adding info for No Bus:host3
ata3: SATA max UDMA/100 mmio m512@0xc4006000 tf 0xc4006080 irq 17
ata4: SATA max UDMA/100 mmio m512@0xc4006000 tf 0xc40060c0 irq 17
ata3: SATA link down (SStatus 0 SControl 310)
ata4: SATA link down (SStatus 0 SControl 310)
ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 22 (level, low) -> IRQ 21
PM: Adding info for ieee1394:fw-host0
PM: Adding info for No Bus:fw-host0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[c4006800-c4006fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
PM: Adding info for No Bus:video1394-0
video1394: Installed video1394 module
PM: Adding info for No Bus:raw1394
ieee1394: raw1394: /dev/raw1394 device initialized
PM: Adding info for No Bus:eth1
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
INFTL: inftlcore.c $Revision: 1.19 $, inftlmount.c $Revision: 1.18 $
Yenta: CardBus bridge found at 0000:06:09.0 [104d:81e8]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:09.0, mfunc 0x00a01b22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
pcmcia: parent PCI bridge I/O window: 0x8000 - 0x8fff
cs: IO port probe 0x8000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc40fffff
PM: Adding info for No Bus:pcmcia_socket0
PM: Adding info for platform:i82365.0
Intel ISA PCIC probe: not found.
PM: Removing info for platform:i82365.0
Databook TCIC-2 PCMCIA probe: not found.
aoe: AoE v32 initialised.
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 18 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 22, io mem 0xb8004000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
PM: Adding info for No Bus:usbdev1.1_ep81
PM: Adding info for No Bus:usbdev1.1
ACPI: PCI Interrupt 0000:06:0b.2[C] -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:06:0b.2: EHCI Host Controller
ehci_hcd 0000:06:0b.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:06:0b.2: irq 16, io mem 0xc4006400
ehci_hcd 0000:06:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
PM: Adding info for No Bus:usbdev2.1_ep81
PM: Adding info for No Bus:usbdev2.1
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 18 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 22, io base 0x00004800
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 2
PM: Adding info for No Bus:usbdev3.1_ep81
PM: Adding info for No Bus:usbdev3.1
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004820
PM: Adding info for usb:usb4
PM: Adding info for No Bus:usbdev4.1_ep00
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for usb:1-4
PM: Adding info for No Bus:usbdev1.2_ep00
usb 1-4: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-4:1.0
PM: Adding info for No Bus:usbdev1.2_ep02
PM: Adding info for No Bus:usbdev1.2_ep86
PM: Adding info for No Bus:usbdev1.2
PM: Adding info for No Bus:usbdev4.1_ep81
PM: Adding info for No Bus:usbdev4.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PM: Adding info for ieee1394:0800460301ee131a
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00004840
PM: Adding info for usb:usb5
PM: Adding info for No Bus:0800460301ee131a
PM: Adding info for No Bus:usbdev5.1_ep00
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460301ee131a]
PM: Adding info for ieee1394:0800460301ee131a-0
usb usb5: configuration #1 chosen from 1 choice
PM: Adding info for usb:5-0:1.0
PM: Adding info for No Bus:0800460301ee131a-0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev5.1_ep81
PM: Adding info for No Bus:usbdev5.1
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004860
PM: Adding info for usb:usb6
PM: Adding info for No Bus:usbdev6.1_ep00
usb usb6: configuration #1 chosen from 1 choice
PM: Adding info for usb:6-0:1.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev6.1_ep81
PM: Adding info for No Bus:usbdev6.1
ACPI: PCI Interrupt 0000:06:0b.0[A] -> GSI 22 (level, low) -> IRQ 21
uhci_hcd 0000:06:0b.0: UHCI Host Controller
uhci_hcd 0000:06:0b.0: new USB bus registered, assigned bus number 7
uhci_hcd 0000:06:0b.0: irq 21, io base 0x00008000
PM: Adding info for usb:usb7
PM: Adding info for No Bus:usbdev7.1_ep00
usb usb7: configuration #1 chosen from 1 choice
PM: Adding info for usb:7-0:1.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev7.1_ep81
PM: Adding info for No Bus:usbdev7.1
ACPI: PCI Interrupt 0000:06:0b.1[B] -> GSI 19 (level, low) -> IRQ 20
uhci_hcd 0000:06:0b.1: UHCI Host Controller
uhci_hcd 0000:06:0b.1: new USB bus registered, assigned bus number 8
uhci_hcd 0000:06:0b.1: irq 20, io base 0x00008020
PM: Adding info for usb:usb8
PM: Adding info for No Bus:usbdev8.1_ep00
usb usb8: configuration #1 chosen from 1 choice
PM: Adding info for usb:8-0:1.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 3
PM: Adding info for No Bus:usbdev8.1_ep81
PM: Adding info for No Bus:usbdev8.1
Initializing USB Mass Storage driver...
PM: Adding info for usb:2-2
PM: Adding info for No Bus:usbdev2.3_ep00
usb 2-2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-2:1.0
PM: Adding info for No Bus:usbdev2.3_ep81
PM: Adding info for No Bus:usbdev2.3_ep82
PM: Adding info for No Bus:usbdev2.3
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x04b4, Product: 0x6830, Revision: 0x0001
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
scsi4 : SCSI emulation for USB Mass Storage devices
PM: Adding info for No Bus:host4
usb-storage: *** thread sleeping.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 5-1: new full speed USB device using uhci_hcd and address 2
PM: Adding info for usb:5-1
PM: Adding info for No Bus:usbdev5.2_ep00
usb 5-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:5-1:1.0
PM: Adding info for No Bus:usbdev5.2_ep81
PM: Adding info for No Bus:usbdev5.2_ep02
PM: Adding info for No Bus:usbdev5.2_ep83
PM: Adding info for No Bus:usbdev5.2
usb 7-1: new full speed USB device using uhci_hcd and address 2
PM: Adding info for usb:7-1
PM: Adding info for No Bus:usbdev7.2_ep00
usb 7-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:7-1:1.0
PM: Adding info for No Bus:usbdev7.2_ep81
PM: Adding info for No Bus:usbdev7.2_ep02
PM: Adding info for No Bus:usbdev7.2_ep82
PM: Adding info for usb:7-1:1.1
PM: Adding info for No Bus:usbdev7.2_ep03
PM: Adding info for No Bus:usbdev7.2_ep83
PM: Adding info for usb:7-1:1.2
PM: Adding info for No Bus:usbdev7.2
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver berry_charge
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
parkbd: no such parport
PM: Adding info for serio:serio1
PM: Adding info for No Bus:mice
PM: Adding info for No Bus:mouse0
PM: Adding info for No Bus:psaux
mice: PS/2 mouse device common for all mice
PM: Adding info for No Bus:event0
PM: Adding info for No Bus:event1
PM: Adding info for No Bus:event2
PM: Adding info for No Bus:event3
PM: Adding info for No Bus:event4
PM: Adding info for No Bus:event5
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
PM: Adding info for No Bus:input6
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
PM: Adding info for No Bus:event6
PM: Adding info for No Bus:input7
input: PS/2 Mouse as /devices/virtual/input/input7
PM: Adding info for No Bus:mouse1
PM: Adding info for No Bus:event7
PM: Adding info for No Bus:input8
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
PM: Adding info for No Bus:mouse2
PM: Adding info for No Bus:event8
PM: Adding info for No Bus:input9
input: PC Speaker as /devices/platform/pcspkr/input/input9
PM: Adding info for No Bus:event9
PM: Adding info for platform:rtc-test.0
PM: Adding info for No Bus:rtc0
rtc-test rtc-test.0: rtc core: registered test as rtc0
PM: Adding info for platform:rtc-test.1
PM: Adding info for No Bus:rtc1
rtc-test rtc-test.1: rtc core: registered test as rtc1
i2c-parport: adapter type unspecified
i2c-parport-light: adapter type unspecified
md: raid0 personality registered for level 0
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: uevent: version 1.0.3
PM: Adding info for No Bus:device-mapper
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [e-mail]
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
device-mapper: multipath rdac: rdac: version 0.4 loaded
Bluetooth: HCI USB driver ver 2.9
PM: Removing info for No Bus:usbdev7.2_ep03
PM: Removing info for No Bus:usbdev7.2_ep83
PM: Adding info for No Bus:usbdev7.2_ep03
PM: Adding info for No Bus:usbdev7.2_ep83
PM: Adding info for bluetooth:hci0
usbcore: registered new interface driver hci_usb
Bluetooth: Virtual HCI driver ver 1.2
PM: Adding info for No Bus:vhci
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.1
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.9
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.1
usbcore: registered new interface driver bfusb
EDAC MC: Ver: 2.1.0 Feb 21 2008
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
Marking TSC unstable due to: TSC halts in idle.
Time: hpet clocksource has been installed.
PM: Adding info for No Bus:mmc0
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
PM: Adding info for No Bus:timer
PM: Adding info for No Bus:sequencer
PM: Adding info for No Bus:sequencer2
PM: Adding info for No Bus:seq
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PM: Adding info for No Bus:card0
PM: Adding info for No Bus:pcmC0D0p
PM: Adding info for No Bus:pcmC0D0c
PM: Adding info for No Bus:dsp
PM: Adding info for No Bus:audio
PM: Adding info for No Bus:hwC0D1
PM: Adding info for No Bus:hwC0D0
PM: Adding info for No Bus:controlC0
PM: Adding info for No Bus:mixer
mmc0: new SD card at address 80ca
PM: Adding info for mmc:mmc0:80ca
ALSA device list:
  #0: HDA Intel at 0xb8000000 irq 18
PM: Adding info for No Bus:teql0
netem: version 1.2
u32 classifier
    Performance counters on
    input device check on 
    Actions configured 
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (14336 buckets, 57344 max)
IPv4 over IPv4 tunneling driver
PM: Adding info for No Bus:tunl0
GRE over IPv4 tunneling driver
PM: Adding info for No Bus:gre0
mmcblk0: mmc0:80ca SD512 495488KiB 
 mmcblk0:<6>ip_tables: (C) 2000-2006 Netfilter Core Team
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Clocksource tsc unstable (delta = -103663178 ns)
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
tunl0: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
PM: Adding info for No Bus:sit0
 p1
sit0: Disabled Privacy Extensions
PM: Adding info for No Bus:ip6tnl0
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lec.c: Feb 21 2008 19:32:13 initialized
mpc.c: Feb 21 2008 19:32:10 initialized
802.1Q VLAN Support v1.8 Ben Greear <[e-mail]>
All bugs added by David S. Miller <[e-mail]>
SCTP: Hash tables configured (established 65536 bind 65536)
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[e-mail]>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
  Magic number: 0:142:693
rtc-test rtc-test.0: setting system clock to 2008-03-03 17:40:13 UTC (1204566013)
md: Autodetecting RAID arrays.
md: Scanned 2 and added 2 devices.
md: autorun ...
md: considering sdb3 ...
md:  adding sdb3 ...
md:  adding sda3 ...
md: created md3
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
md3: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb3
raid0:   comparing sdb3(96502336) with sdb3(96502336)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sda3
raid0:   comparing sda3(96502336) with sdb3(96502336)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 193004672 blocks.
raid0 : conf->hash_spacing is 193004672 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
PM: Adding info for No Bus:target4:0:0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage:  12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
scsi 4:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-K16D 1.00 PQ: 0 ANSI: 0
PM: Adding info for scsi:4:0:0:0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x3 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x5 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x7 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE_10 (10 bytes)
usb-storage:  5a 00 2a 00 00 00 00 00 80 00
usb-storage: Bulk Command S 0x43425355 T 0x8 L 128 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 128 bytes, 1 entries
usb-storage: Status code -121; transferred 72/128
usb-storage: -- short read transfer
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code -32; transferred 0/13
usb-storage: clearing endpoint halt for pipe 0xc0030280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=86 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x8 R 56 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Adding info for No Bus:target4:0:1
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Removing info for No Bus:target4:0:1
PM: Adding info for No Bus:target4:0:2
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Removing info for No Bus:target4:0:2
PM: Adding info for No Bus:target4:0:3
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Removing info for No Bus:target4:0:3
PM: Adding info for No Bus:target4:0:4
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Removing info for No Bus:target4:0:4
PM: Adding info for No Bus:target4:0:5
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Removing info for No Bus:target4:0:5
PM: Adding info for No Bus:target4:0:6
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Removing info for No Bus:target4:0:6
PM: Adding info for No Bus:target4:0:7
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
PM: Removing info for No Bus:target4:0:7
usb-storage: device scan complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 316k freed
Write protecting the kernel text: 6708k
Write protecting the kernel read-only data: 2274k
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
audit(1204566016.477:2): enforcing=1 old_enforcing=0 auid=4294967295
SELinux:8192 avtab hash slots allocated.Num of rules:19516
SELinux:8192 avtab hash slots allocated.Num of rules:19516
security:  3 users, 6 roles, 1083 types, 45 bools
security:  67 classes, 19516 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev md3, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=deny
audit(1204566017.249:3): policy loaded auid=4294967295
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x9 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0xa L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0xb L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0xc L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage:  00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0xd L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0xe L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage:  1e 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0xf L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
audit(1204566020.564:4): avc:  denied  { read } for  pid=1717 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.568:5): avc:  denied  { read } for  pid=1716 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.568:6): avc:  denied  { read } for  pid=1719 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.568:7): avc:  denied  { read } for  pid=1720 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.569:8): avc:  denied  { read } for  pid=1721 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.569:9): avc:  denied  { read } for  pid=1722 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.754:10): avc:  denied  { read } for  pid=1815 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.785:11): avc:  denied  { read } for  pid=1833 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.830:12): avc:  denied  { read } for  pid=1856 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.886:13): avc:  denied  { read } for  pid=1873 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.916:14): avc:  denied  { read } for  pid=1895 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.940:15): avc:  denied  { read } for  pid=1911 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566020.954:16): avc:  denied  { read } for  pid=1916 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.164:17): avc:  denied  { read } for  pid=1990 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.217:18): avc:  denied  { read } for  pid=2011 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.346:19): avc:  denied  { read } for  pid=2037 comm="runscript.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.375:20): avc:  denied  { read } for  pid=2058 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.437:21): avc:  denied  { read } for  pid=2095 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.545:22): avc:  denied  { read } for  pid=2149 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.572:23): avc:  denied  { read } for  pid=2167 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.597:24): avc:  denied  { read } for  pid=2178 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.612:25): avc:  denied  { read } for  pid=2190 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.627:26): avc:  denied  { read } for  pid=2203 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.642:27): avc:  denied  { read } for  pid=2218 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.655:28): avc:  denied  { read } for  pid=2226 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.669:29): avc:  denied  { read } for  pid=2236 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.681:30): avc:  denied  { read } for  pid=2245 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.750:31): avc:  denied  { read } for  pid=2287 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.794:32): avc:  denied  { read } for  pid=2303 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.827:33): avc:  denied  { read } for  pid=2330 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566021.834:34): avc:  denied  { read } for  pid=2335 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.020:35): avc:  denied  { read } for  pid=2406 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.126:36): avc:  denied  { read } for  pid=2447 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.143:37): avc:  denied  { read } for  pid=2452 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.245:38): avc:  denied  { read } for  pid=2494 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.272:39): avc:  denied  { read } for  pid=2510 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.316:40): avc:  denied  { read } for  pid=2536 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.332:41): avc:  denied  { read } for  pid=2550 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.347:42): avc:  denied  { read } for  pid=2555 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.373:43): avc:  denied  { read } for  pid=2574 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.400:44): avc:  denied  { read } for  pid=2595 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.422:45): avc:  denied  { read } for  pid=2607 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.477:46): avc:  denied  { read } for  pid=2642 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.487:47): avc:  denied  { read } for  pid=2649 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.492:48): avc:  denied  { read } for  pid=2656 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.502:49): avc:  denied  { read } for  pid=2664 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.513:50): avc:  denied  { read } for  pid=2672 comm="modprobe.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.625:51): avc:  denied  { read } for  pid=2745 comm="runscript.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
audit(1204566022.694:52): avc:  denied  { read } for  pid=2771 comm="runscript.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md3, internal journal
audit(1204566024.138:53): avc:  denied  { getattr } for  pid=3465 comm="update-modules" path="/lib/modules/2.6.24-gentoo-r2_port4/modules.dep" dev=md3 ino=7947214 scontext=system_u:system_r:update_modules_t tcontext=user_u:object_r:modules_object_t tclass=file
audit(1204566024.141:54): avc:  denied  { read } for  pid=3465 comm="update-modules" name="build" dev=md3 ino=7947215 scontext=system_u:system_r:update_modules_t tcontext=user_u:object_r:modules_object_t tclass=lnk_file
audit(1204566024.141:55): avc:  denied  { read } for  pid=3490 comm="update-modules" name="build" dev=md3 ino=7947215 scontext=system_u:system_r:update_modules_t tcontext=user_u:object_r:modules_object_t tclass=lnk_file
audit(1204566024.141:56): avc:  denied  { read } for  pid=3465 comm="update-modules" name="build" dev=md3 ino=7947215 scontext=system_u:system_r:update_modules_t tcontext=user_u:object_r:modules_object_t tclass=lnk_file
audit(1204566024.142:57): avc:  denied  { read } for  pid=3465 comm="update-modules" name="build" dev=md3 ino=7947215 scontext=system_u:system_r:update_modules_t tcontext=user_u:object_r:modules_object_t tclass=lnk_file
audit(1204566024.142:58): avc:  denied  { read } for  pid=3465 comm="update-modules" name="build" dev=md3 ino=7947215 scontext=system_u:system_r:update_modules_t tcontext=user_u:object_r:modules_object_t tclass=lnk_file
audit(1204566024.227:59): avc:  denied  { getattr } for  pid=3502 comm="update-modules" path="/boot" dev=md3 ino=16859137 scontext=system_u:system_r:update_modules_t tcontext=system_u:object_r:boot_t tclass=dir
audit(1204566024.284:60): avc:  denied  { read } for  pid=3506 comm="update-modules" name="linux-2.6.24-gentoo-r2" dev=md3 ino=3114812 scontext=system_u:system_r:update_modules_t tcontext=system_u:object_r:src_t tclass=dir
audit(1204566025.862:61): avc:  denied  { unlink } for  pid=3509 comm="depmod" name="modules.dep" dev=md3 ino=7947214 scontext=system_u:system_r:depmod_t tcontext=user_u:object_r:modules_object_t tclass=file
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:06:0a.0[A] -> GSI 23 (level, low) -> IRQ 23
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
PM: Adding info for No Bus:0000:06:0a.0
PM: Removing info for No Bus:0000:06:0a.0
PM: Adding info for No Bus:eth2
ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
PM: Adding info for No Bus:kqemu
KQEMU installed, max_locked_mem=449552kB.
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: USB GSPCA camera found.(VC0321) 
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: [spca5xx_probe:4275] Camera type YUYV 
audit(1204566026.171:62): avc:  denied  { read } for  pid=3534 comm="runscript.sh" name="softlevel" dev=md3 ino=17350657 scontext=system_u:system_r:udev_t tcontext=system_u:object_r:initrc_state_t tclass=file
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/vc032x.h: [vc032x_probe_sensor:140] check sensor header 44
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/vc032x.h: [vc032x_read_sensor_register:123] Read Sensor h (0x00) m (0x00) l (0x00) 
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/vc032x.h: [vc032x_read_sensor_register:123] Read Sensor h (0x00) m (0x60) l (0x76) 
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/vc032x.h: [vc0321_config:366] Find Sensor OV7660
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 176 minh 144
PM: Adding info for No Bus:video0
usbcore: registered new interface driver gspca
/var/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: gspca driver 01.00.20 registered
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), not configured for labeling
Adding 1052216k swap on /dev/sda1.  Priority:0 extents:1 across:1052216k
Adding 1052216k swap on /dev/sdb2.  Priority:0 extents:1 across:1052216k
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Removing info for No Bus:vcs3
PM: Removing info for No Bus:vcsa3
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Removing info for No Bus:vcs4
PM: Removing info for No Bus:vcsa4
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Removing info for No Bus:vcs5
PM: Removing info for No Bus:vcsa5
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Removing info for No Bus:vcs6
PM: Removing info for No Bus:vcsa6
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
PM: Adding info for No Bus:vcs8
PM: Adding info for No Bus:vcsa8
PM: Removing info for No Bus:vcs8
PM: Removing info for No Bus:vcsa8
PM: Adding info for No Bus:vcs9
PM: Adding info for No Bus:vcsa9
PM: Removing info for No Bus:vcs9
PM: Removing info for No Bus:vcsa9
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
PM: Removing info for No Bus:vcs10
PM: Removing info for No Bus:vcsa10
PM: Adding info for No Bus:vcs11
PM: Adding info for No Bus:vcsa11
PM: Removing info for No Bus:vcs11
PM: Removing info for No Bus:vcsa11
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Removing info for No Bus:vcs3
PM: Removing info for No Bus:vcsa3
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Removing info for No Bus:vcs4
PM: Removing info for No Bus:vcsa4
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Removing info for No Bus:vcs5
PM: Removing info for No Bus:vcsa5
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Removing info for No Bus:vcs6
PM: Removing info for No Bus:vcsa6
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Removing info for No Bus:vcs7
PM: Removing info for No Bus:vcsa7
PM: Adding info for No Bus:vcs8
PM: Adding info for No Bus:vcsa8
PM: Removing info for No Bus:vcs8
PM: Removing info for No Bus:vcsa8
PM: Adding info for No Bus:vcs9
PM: Adding info for No Bus:vcsa9
PM: Removing info for No Bus:vcs9
PM: Removing info for No Bus:vcsa9
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
PM: Removing info for No Bus:vcs10
PM: Removing info for No Bus:vcsa10
PM: Adding info for No Bus:vcs11
PM: Adding info for No Bus:vcsa11
PM: Removing info for No Bus:vcs11
PM: Removing info for No Bus:vcsa11
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:vcs12
PM: Adding info for No Bus:vcsa12
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
eth2: no IPv6 routers present