Vital system information on this bug, including oops log and system profile.

IVTV Crash Vitals.txt (text/plain), 34.12 KB, created by Guy A. Paddock on 2007-11-08 04:12:31 UTC

***************************
* Latest Oops Encountered *
**********************************************************
Oops: 0000 [#1]
SMP
Modules linked in: wm8775 cx25840 dvb_pll or51132 cx88_dvb cx88_vp3054_i2c video_buf_dvb tuner bcm3510 lgdt330x nxt200x mt352 nvidia(P) stv0299 ivtv cx2341x cx8800 cx88xx b2c2_flexcop_pci ir_common video_buf tveeprom btcx_risc usbhid snd_ac97_codec ac97_bus lirc_atiusb(F) lirc_dev i2c_sis96x b2c2_flexcop
CPU:    0
EIP:    0060:[<f226f6ab>]    Tainted: PF       VLI
EFLAGS: 00010046   (2.6.23-gentoo #9)
EIP is at try_mailbox+0xb/0x3b [ivtv]
eax: 00000000   ebx: 00000000   ecx: 00000000   edx: eb1d768c
esi: 00000000   edi: 000002ec   ebp: eb1d768c   esp: c054bde8
ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
Process swapper (pid: 0, ti=c054a000 task=c0512340 task.ti=c054a000)
Stack: 00000000 f226f902 c054be40 c1813f00 c1807980 00000000 00000001 00000070
       00000400 eb1d02ec 00000003 0000000b eb1d0000 f227bb80 00000028 00000020
       00000000 000003e8 c011fb37 eb1d02a0 c054be68 00000003 0000000b eb1d0000
Call Trace:
 [<f226f902>] ivtv_api_call+0x14b/0x54f [ivtv]
 [<c011fb37>] __wake_up_common+0x39/0x59
 [<f226fd1f>] ivtv_api+0x19/0x3c [ivtv]
 [<f226fd89>] ivtv_vapi+0x47/0x4d [ivtv]
 [<f226e882>] ivtv_irq_handler+0x11e/0xf3c [ivtv]
 [<f293def4>] _nv002641rm+0x4c/0x6c [nvidia]
 [<f294292b>] rm_isr+0x2e/0x5d [nvidia]
 [<f2c15edb>] nv_kern_isr+0x51/0x9f [nvidia]
 [<c0147779>] handle_IRQ_event+0x25/0x4a
 [<c0148b33>] handle_fasteoi_irq+0x5f/0xb4
 [<c0106653>] do_IRQ+0x3b/0x78
 [<c0116ef6>] smp_apic_timer_interrupt+0x5a/0x85
 [<c01048e3>] common_interrupt+0x23/0x28
 [<c0102263>] mwait_idle_with_hints+0x3b/0x3f
 [<c0102267>] mwait_idle+0x0/0xa
 [<c010238a>] cpu_idle+0x74/0xad
 [<c0550965>] start_kernel+0x2c2/0x34d
 [<c05500e9>] unknown_bootoption+0x0/0x1e6
 =======================
Code: 44 24 20 89 44 24 08 89 54 24 04 c7 04 24 b4 b8 27 f2 e8 c5 80 eb cd e9 25 fc ff ff 90 90 90 90 53 8d 1c 89 c1 e3 04 8b 02 01 d8 <8b> 00 85 c0 74 04 a8a 04 19 c0 85 c0 75 17
EIP: [<f226f6ab>] try_mailbox+0xb/0x3b [ivtv] SS:ESP 0068:c054bde8
Kernel panic - not syncing: Fatal exception in interrupt

***********************************
* Second-to-last Oops Encountered *
**********************************************************
Oops: 0000 [#1]
SMP
Modules linked in: wm8775 cx25840 tuner dvb_pll or51132 cx88_dvb cx88_vp3054_i2c video_buf_dvb nvidia(P) bcm3510 lgdt330x nxt200x mt352 ivtv cx2341x cx8802 sx88xx stv0299 ir_common tveeprom btcx_risc video_buf snd_ac97_codec ac97_bus b2c2_flexcop_pci b2c2_flexcop i2c_sis96x lirc_atiusb(F) lirc_dev nfs nfs_acl locscan usbhid
CPU:    0
EIP:    0060:[<f22cba1c>]    Tainted: PF       VLI
EFLAGS: 00010207   (2.6.23-gentoo #8)
EIP is at stream_enc_dma_append+0xbf/0x543 [ivtv]
eax: 22e78800   ebx: 00000000   ecx: eed10000   edx: 00000000
esi: eed10000   edi: 00000000   ebp: eed10084   esp: c054be68
ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
Process swapper (pid: 0, ti=c054a000 task=c0512340 task.ti=c054a000)
Stack: eed10214 eed10214 eed10000 00000001 00000003 eed1ecf0 eed1ecec eed10000
       00000001 2e678800 000027c0 00000000 00000000 00000000 00000000 eed10084
       c054bed8 eed10000 eed10080 f22cd2fc 00000000 c054becc c01200b6 00000000
Call Trace:
 [<f22cd2fc>] ivtv_irq_handler+0xb98/0xf3c [ivtv]
 [<c01200b6>] inc_nr_running+0x14/0x22
 [<c0147779>] handle_IRQ_event+0x25/0x4a
 [<c0148b33>] handle_fasteoi_irq+0x5f/0xb4
 [<c0106653>] do_IRQ+0x3b/0x78
 [<c01048e3>] common_interrupt+0x23/0x28
 [<c0102263>] mwait_idle_with_hints+0x3b/0x3f
 [<c0102267>] mwait_idle+0x0/0xa
 [<c010238a>] cpu_idle+0x74/0xad
 [<c0550965>] start_kernel+0x2c2/0x34d
 [<c05500e9>] unknown_bootoption+0x0/0x1e6
 =======================
Code: 55 8b 74 24 1c 80 7e 18 00 74 12 83 ff 03 0f 84 49 03 00 00 83 ff 06 0f 84 40 03 00 00 8b 44 24 24 8b 4c 24 1c 03 81 9c ba 00 00 <8b> 00 89 45 24 8b 440 00 c7 00 fe 01 00 00
EIP: [<f22cba1c>] stream_enc_dma_append+0xbf/0x543 [ivtv] SS:ESP 0068:c054be68
Kernel panic - not syncing: Fatal exception in interrupt

******************
* `lspci` output *
**********************************************************
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:09.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
00:0a.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11)
00:0b.0 Mass storage controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
00:0c.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 11)
00:0d.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
00:0d.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600/GeForce 6600 GT] (rev a2)
02:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
03:08.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
03:09.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)

*******************************
* '/proc/interrupts' contents *
**********************************************************
CPU0       CPU1
  0:        252          0   IO-APIC-edge      timer
  1:        946          0   IO-APIC-edge      i8042
  3:        737          0   IO-APIC-edge      serial
  7:          0          0   IO-APIC-edge      parport0
  8:    8404227          0   IO-APIC-edge      rtc
 14:     219114          0   IO-APIC-edge      ide0
 15:        167          0   IO-APIC-edge      ide1
 16:     518348          0   IO-APIC-fasteoi   sata_sil, ivtv1, eth0
 17:     885181          0   IO-APIC-fasteoi   ivtv2, nvidia
 18:          3          0   IO-APIC-fasteoi   ehci_hcd:usb1
 19:         13          0   IO-APIC-fasteoi   ohci_hcd:usb3
 20:         24          0   IO-APIC-fasteoi   acpi, ohci_hcd:usb2
 21:    1072267          0   IO-APIC-fasteoi   Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver, cx88[0], ivtv3, cx88[0]
 22:      95896          0   IO-APIC-fasteoi   SiS SI7012, ivtv0
NMI:          0          0
LOC:   15035223   17044651
ERR:          0
MIS:          0

*************************
* Latest `dmesg` output *
**********************************************************
Linux version 2.6.23-gentoo (root@pegasus) (gcc version 4.1.2 (Gentoo 4.1.2)) #9 SMP Wed Nov 7 17:01:32 EST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
 BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB HIGHMEM available.
768MB LOWMEM available.
Entering add_active_range(0, 0, 262140) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   196608
  HighMem    196608 ->   262140
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   262140
On node 0 totalpages: 262140
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1504 pages used for memmap
  Normal zone: 191008 pages, LIFO batch:31
  HighMem zone: 511 pages used for memmap
  HighMem zone: 65021 pages, LIFO batch:15
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F5850, 0014 (r0 ASUS  )
ACPI: RSDT 3FFFC000, 0030 (r1 ASUS   P4S800   42302E31 MSFT 31313031)
ACPI: FACP 3FFFC0C0, 0074 (r1 ASUS   P4S800   42302E31 MSFT 31313031)
ACPI: DSDT 3FFFC134, 25D4 (r1   ASUS P4S800       1000 MSFT  100000B)
ACPI: FACS 3FFFF000, 0040
ACPI: BOOT 3FFFC030, 0028 (r1 ASUS   P4S800   42302E31 MSFT 31313031)
ACPI: APIC 3FFFC058, 0068 (r1 ASUS   P4S800   42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists in Zone order.  Total pages: 260093
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda2 udev video=uvesafb:1024x768-32,mtrr:3,ywrap splash=silent,fadein,theme:mythPVR quiet console=tty0 console=ttyS1,38400 vmalloc=256m
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2800.280 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032068k/1048560k available (3245k kernel code, 15668k reserved, 1139k data, 248k init, 262128k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
      .init : 0xc0550000 - 0xc058e000   ( 248 kB)
      .data : 0xc042b75f - 0xc0548584   (1139 kB)
      .text : 0xc0100000 - 0xc042b75f   (3245 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5602.27 BogoMIPS (lpj=2801135)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000041d 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5599.43 BogoMIPS (lpj=2799716)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000041d 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
Total of 2 processors activated (11201.70 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1100, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0x3fffffff could not be reserved
pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
pnp: 00:02: ioport range 0xe400-0xe47f has been reserved
pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved
pnp: 00:02: ioport range 0xe600-0xe61f has been reserved
pnp: 00:02: ioport range 0x480-0x48f has been reserved
pnp: 00:02: iomem range 0xffee0000-0xffefffff has been reserved
pnp: 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
pnp: 00:0e: ioport range 0x295-0x296 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: ae000000-afffffff
  PREFETCH window: dff00000-febfffff
PCI: Bridge: 0000:00:0a.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: d4000000-dfdfffff
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: c8000000-d3efffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1585k freed
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[e-mail]>
highmem bounce pool size: 64 pages
fuse init (API version 7.8)
SGI XFS with ACLs, no debug enabled
io scheduler noop registered
io scheduler deadline registered (default)
Boot video device is 0000:01:00.0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected SiS chipset - id:1608
agpgart: AGP aperture is 256M @ 0xb0000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
uvesafb: NVIDIA Corporation, nv43 Board - p218h0  , Chip Rev   , OEM: NVIDIA, VBE v3.0
uvesafb: protected mode interface info at c000:d620
uvesafb: pmi: set display start = c00cd656, set palette = c00cd6c0
uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 85 Hz, hf = 70 kHz, clk = 110 MHz
uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=6144
Console: switching to colour frame buffer device 128x48
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
uvesafb: framebuffer at 0xe0000000, mapped to 0xf0900000, using 24576k, total 131072k
fb0: VESA VGA frame buffer device
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: Invalid PBLK length [5]
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
loop: module loaded
nbd: registered device at major 43
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
0000:00:04.0: VIA 6103 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 16, 00:0e:a6:3b:22:8f.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[e-mail]>
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6K040L0, ATA DISK drive
hdb: PIONEER DVD-RW DVR-110D, ATAPI CD/DVD-ROM drive
hda: selected mode 0x46
hdb: selected mode 0x44
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6L300R0, ATA DISK drive
hdc: selected mode 0x46
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
 hda: hda1 hda2
hdc: max request size: 512KiB
hdc: 586114704 sectors (300090 MB) w/16384KiB Cache, CHS=36483/255/63, UDMA(133)
hdc: cache flushes supported
 hdc: hdc1
hdb: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
sata_sil 0000:00:0b.0: version 2.3
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 cmd 0xf0822080 ctl 0xf082208a bmdma 0xf0822000 irq 16
ata2: SATA max UDMA/100 cmd 0xf08220c0 ctl 0xf08220ca bmdma 0xf0822008 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-7: ST3500641AS, 3.AAE, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 310)
scsi 0:0:0:0: Direct-Access     ATA      ST3500641AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 18, io mem 0xac800000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xad800000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 19, io mem 0xad000000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v3.0
Initializing USB Mass Storage driver...
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using ohci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
EDAC MC: Ver: 2.1.0 Nov  6 2007
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
Freeing unused kernel memory: 248k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 507912
ext3_orphan_cleanup: deleting unreferenced inode 507911
ext3_orphan_cleanup: deleting unreferenced inode 507910
ext3_orphan_cleanup: deleting unreferenced inode 507909
EXT3-fs: hda2: 4 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
lirc_dev: IR Remote Control driver registered, at major 61
lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.

lirc_atiusb: USB remote driver for LIRC $Revision: 1.61 $
lirc_atiusb: Paul Miller <[e-mail]>
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_atiusb[2]:  on usb3:2
usbcore: registered new interface driver lirc_atiusb
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 21
DVB: registering new adapter (FlexCop Digital TV device)
b2c2-flexcop: MAC address = 00:d0:d7:30:12:a9
input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input3
input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:03.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx2388x v4l2 driver version 0.0.6 loaded
b2c2-flexcop: i2c master_xfer failed
ivtv:  Start initialization, version 1.0.0
nvidia: module license 'NVIDIA' taints kernel.
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Unknown/Unsupported NXT chip: 00 00 00 00 00
b2c2-flexcop: i2c master_xfer failed
lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
bcm3510: Revision: 0x1, Layer: 0xb.
b2c2-flexcop: found the bcm3510 at i2c address: 0x0f
DVB: registering frontend 0 (Broadcom BCM3510 VSB/QAM frontend)...
b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 1st generation' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 22
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50435 usecs
intel8x0: clocking to 48000
CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0d.2[A] -> GSI 17 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:00:0d.2, rev: 5, irq: 21, latency: 80, mmio: 0xa9000000
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 18 (level, low) -> IRQ 22
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22]
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 1 (Oren OR51132 VSB/QAM Frontend)...
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
tveeprom 3-0050: Hauppauge model 23552, rev D487, serial# 8758050
tveeprom 3-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected WinTV PVR 500 (unit #1)
tuner 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
tuner 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
tuner 3-0060: TEA5767 detected.
tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner 3-0061: type set to 70 (Samsung TCPN 2121P30A)
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card #0: WinTV PVR 500 (unit #1)
ivtv1: Initializing card #1
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 16
ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Encoder revision: 0x02060039
tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 4-0050: Hauppauge model 23552, rev D487, serial# 8758050
tveeprom 4-0050: tuner model is Samsung TCPN 2121P30A (idx 87, type 70)
tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 4-0050: audio processor is CX25843 (idx 37)
tveeprom 4-0050: decoder processor is CX25843 (idx 30)
tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
tuner 4-0061: type set to 70 (Samsung TCPN 2121P30A)
ivtv1: Registered device video1 for encoder MPEG (4 MB)
ivtv1: Registered device video33 for encoder YUV (2 MB)
ivtv1: Registered device vbi1 for encoder VBI (1 MB)
ivtv1: Registered device video25 for encoder PCM audio (1 MB)
ivtv1: Initialized card #1: WinTV PVR 500 (unit #2)
ivtv2: Initializing card #2
ivtv2: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 16 (level, low) -> IRQ 17
ivtv2: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv2: Encoder revision: 0x02060039
tuner 5-0043: chip found @ 0x86 (ivtv i2c driver #2)
tda9887 5-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 5-0060: TEA5767 detected.
tuner 5-0060: chip found @ 0xc0 (ivtv i2c driver #2)
tuner 5-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #2)
cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
cx25840 5-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #2)
tveeprom 5-0050: Hauppauge model 23552, rev D592, serial# 8321801
tveeprom 5-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 5-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 5-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 5-0050: audio processor is CX25843 (idx 37)
tveeprom 5-0050: decoder processor is CX25843 (idx 30)
tveeprom 5-0050: has radio, has no IR receiver, has no IR transmitter
ivtv2: Autodetected WinTV PVR 500 (unit #1)
tuner 5-0061: type set to 57 (Philips FQ1236A MK4)
ivtv2: Registered device video2 for encoder MPEG (4 MB)
ivtv2: Registered device video34 for encoder YUV (2 MB)
ivtv2: Registered device vbi2 for encoder VBI (1 MB)
ivtv2: Registered device video26 for encoder PCM audio (1 MB)
ivtv2: Registered device radio2 for encoder radio
ivtv2: Initialized card #2: WinTV PVR 500 (unit #1)
ivtv3: Initializing card #3
ivtv3: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 17 (level, low) -> IRQ 21
ivtv3: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv3: Encoder revision: 0x02060039
tuner 6-0043: chip found @ 0x86 (ivtv i2c driver #3)
tda9887 6-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 6-0061: chip found @ 0xc2 (ivtv i2c driver #3)
cx25840 6-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #3)
cx25840 6-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 6-001b: chip found @ 0x36 (ivtv i2c driver #3)
tveeprom 6-0050: Hauppauge model 23552, rev D592, serial# 8321801
tveeprom 6-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 6-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 6-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 6-0050: audio processor is CX25843 (idx 37)
tveeprom 6-0050: decoder processor is CX25843 (idx 30)
tveeprom 6-0050: has radio, has no IR receiver, has no IR transmitter
ivtv3: Correcting tveeprom data: no radio present on second unit
ivtv3: Autodetected WinTV PVR 500 (unit #2)
tuner 6-0061: type set to 57 (Philips FQ1236A MK4)
ivtv3: Registered device video3 for encoder MPEG (4 MB)
ivtv3: Registered device video35 for encoder YUV (2 MB)
ivtv3: Registered device vbi3 for encoder VBI (1 MB)
ivtv3: Registered device video27 for encoder PCM audio (1 MB)
ivtv3: Initialized card #3: WinTV PVR 500 (unit #2)
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:00:0d.0, rev: 5, irq: 21, latency: 80, mmio: 0xaa000000
ivtv:  End initialization
NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.23  Thu Oct  4 10:16:34 PDT 2007
cx88[0]/0: registered device video4 [v4l2]
cx88[0]/0: registered device vbi4
cx88[0]/0: registered device radio1
EXT3 FS on hda2, internal journal
XFS mounting filesystem hdc1
Starting XFS recovery on filesystem: hdc1 (logdev: internal)
Ending XFS recovery on filesystem: hdc1 (logdev: internal)
XFS mounting filesystem sda2
Starting XFS recovery on filesystem: sda2 (logdev: internal)
Ending XFS recovery on filesystem: sda2 (logdev: internal)
Adding 999992k swap on /dev/hda1.  Priority:1 extents:1 across:999992k
hda: selected mode 0x46
hdb: selected mode 0x44
hdc: selected mode 0x46
eth0: Media Link On 100mbps full-duplex
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
or51132: Waiting for firmware upload(dvb-fe-or51132-vsb.fw)...
or51132: Version: 10001134-19430000 (113-4-194-3)
or51132: Firmware upload complete.
ivtv1: All encoder VBI stream buffers are full. Dropping data.
ivtv1: Cause: the application is not reading fast enough.
ivtv1: All encoder MPEG stream buffers are full. Dropping data.
ivtv1: Cause: the application is not reading fast enough.